ZH
RU
ES

international unit

international unit, Total:144 items.

In the international standard classification, international unit involves: Quantities and units, Character sets and information coding, Telecommunications in general, Metrology and measurement in general, Machine tools, Fasteners for aerospace construction, Road vehicle systems, Pulps, Earthworks. Excavations. Foundation construction. Underground works, Rubber, Character symbols, Products of the textile industry, Structures of buildings, Linear and angular measurements, Construction materials, Standardization. General rules, Fluid storage devices.

Indonesia Standards, international unit

SNI 19-2746-1992 International system of units

TR-TSE, international unit

TS 293-1965 THE INTERNATIONAL SYSTEM OF UNITS AND OUANTITIES

American Society of Mechanical Engineers (ASME), international unit

ASME SEC I SI UNITS-2001 SI Units
ASME SEC II A SI UNITS-2001 SI Units
ASME SEC II B SI UNITS-2001 SI Units
ASME SEC II C SI UNITS-2001 SI Units
ASME SEC II D SI UNITS-2003 SI Units
ASME SEC III D1 APP SI UNITS-2001 SI Units
ASME SEC III D1 NB SI UNITS-2001 SI Units
ASME SEC III D1 NC SI UNITS-2001 SI Units
ASME SEC III D1 ND SI UNITS-2001 SI Units
ASME SEC III D1 NE SI UNITS-2001 SI Units
ASME SEC III D1 NF SI UNITS-2001 SI Units
ASME SEC III D1 NG SI UNITS-2001 SI Units
ASME SEC III D1 NH SI UNITS-2001 SI Units
ASME SEC III D2 SI UNITS-2001 SI Units
ASME SEC III D3 SI UNITS-2001 SI Units
ASME SEC III NCA SI UNITS-2001 SI Units
ASME SEC IV SI UNITS-2001 SI Units
ASME SEC IX SI UNITS-2001 SI Units
ASME SEC V SI UNITS-2001 SI Units
ASME SEC VI SI UNITS-2001 SI Units
ASME SEC VII SI UNITS-2001 SI Units
ASME SEC VIII D1 SI UNITS-2001 SI Units
ASME SEC VIII D2 SI UNITS-2001 SI Units
ASME SEC VIII D3 SI UNITS-2001 SI Units
ASME SEC X SI UNITS-2001 SI Units
ASME SEC XI SI UNITS-2001 SI Units
ASME B5.51M-1979 Preferred SI units for machine tools
ASME Guide SI-1-1982 Orientation and guide for use of SI (metric) units
ASME B89.7.5-2006 Metrological Traceability of Dimensional Measurements to the SI Unit of Length

Taiwan Provincial Standard of the People's Republic of China, international unit

CNS 10987-2007 International system of units
CNS 10987-1984 The International System of Units (SI)
CNS 14685-2002 Pulps, paper and paperboard ─ Units for expressing properties
CNS 13160-1993 Information Processing - Representation of SI and Other Units in Systems with Limited Character Sets

VE-FONDONORMA, international unit

NORVEN 1-9-1965

American Society for Testing and Materials (ASTM), international unit

ASTM R0017 SI Quick Reference Guide: International System of Units (SI) The Modernized Metric System
ASTM SI10-02 IEEE/ASTM SI 10 American National Standard for Use of the International System of Units (SI): The Modern Metric System
ASTM F1332-99(2011) Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10)

International Telecommunication Union (ITU), international unit

ITU-R V.430-3-1990 Use of the International System of Units (SI)
ITU-R V.430-3 FRENCH-1990 Use of the International System of Units (SI)
ITU-R V.430-3 SPANISH-1990 Use of the International System of Units (SI)
ITU-R V.430-2015 Use of the international system of units (SI)
ITU-R V.430-4-2015 Use of the international system of units (SI)
ITU-T B.3 FRENCH-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)
ITU-T B.3 SPANISH-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)
ITU-T B.3-1993 USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI)

IT-UNI, international unit

Professional Standard - Agriculture, international unit

GB 9648-1988 SI code

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, international unit

GB/T 9648-1988 Code for intenational system of units
GB 3100-1993 SI units and recommendations for the use of their multiples and of certain other units

Danish Standards Foundation, international unit

DS/ISO 1000:1983 SI units and recommendations for the use of their multiples and of certain other units

Standard Association of Australia （SAA）, international unit

AS ISO 1000:1998 The international system of units (SI) and its application

BE-NBN, international unit

NBN X 02-001-1986 SI-units and recommendations for the use of their mul-tiples and of certain other units
NBN 351F-1968
NBN-ISO 2955:1991 Information processing - Representation of SI and other units in systems with limited character sets
NBN-ISO 2955:1993 Information processing. Representation of SI and other untis in systems with limited character sets

SG-SPRING SG, international unit

SS ISO 1000:1992 SI Units And Recommendations For The Use Of Their Multiples And Of Certain Other Units
SS 52-1971 RULES FOR THE USE OF UNITS OF THE INTERNATIONAL SYSTEM (SI)

RO-ASRO, international unit

STAS 737/8-1984 International Svstem of Units (SI) UNITS OF MECHANICS
STAS 737/4-1984 International System of Units (SI) PREFIXES SI
STAS 737/10-1987 International System of Units (SI) UNITS CHARACTERISTIC OF HEAT QUANTITIES
STAS 737/12-1987 International System of Units (SI) UNITS CHARACTERISTIC OF ACOUSTICS
STAS 737/1-1991 International system of units (si). Base and supplementary units
STAS 737/6-1983 International System of Units (SI) UNITS OF SPACE AND TIME
STAS 737/16-1984 International System of Units (SI) UNITS OF SOLID STATE PHYSICS
STAS 737/9-1983 International System of Units (SI) UNITS OF ELECTRICITY AND MAGNETISM
STAS 737/14-1983 International system of units (SI) UNITS CHARACTERISTICS QUANTITIES OF ATOMIC AND NUCLEAR PHYSICS
STAS 9446-1985 USING OF MEASURE LEGAL UNITS OUTSIDE THE INTERNATIONAL SYSTEM OF UNITS
STAS 10085/2-1986 MEASURE UNITS OUTSIDE INTERNATIONAL SYSTEM OF UNITS (SI) Conversion factors
STAS 737/7-1983 International System of Units (SI) UNITS OF PERIODIC AND RELA- TED PHENOMENA
STAS 737/3-1991 International System of Units (SI) RULES FOR WRIT1NG AND USE OF SI UN1TS
STAS 737/11-1984 International Svstem of Units (SI) UNITS OF LIGHT AND RELATED ELECTROMAGNETIC RADIATIONS
STAS 737/13-1982 International System of Units (SI) UNITS OF PIIYSICAL CHEMISTRY AND MOLECULAR PHYSICS
STAS 737/15-1983 International system of units (SI) UNITS CHARAGTERISTICS QUAN- TITIES OF NUCLEAR REACTIONS AND IONIZING RADIATIONS
STAS 737/5-1984 International System of Units (SI) DECIMAL PREFERRED MULTIPLES AND SUBMCLTIPI.ES OF SI CNlTS

NL-NEN, international unit

NEN 1000-1993 Rules for the use of the International System of Units (SI)
NEN 1211-1971 Quantities, SI units and their symbols Atomic and molecular phenomena
NEN 1226-1981 Quantities, SI units and their symbols Atomic and molecular phenomena

Cooling Technology Institute, international unit

CTI STD-145-1995 International System of Units (SI) Conversion Standard

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., international unit

IEEE 268A-1987 INTERNATIONAL SYSTEM OF UNITS (SI) CONVERSION FACTORS
IEEE 268A-1980 INTERNATIONAL SYSTEM OF UNITS (SI) CONVERSION FACTORS
IEEE SI 10 ERTA-2005 Use of the International System of Units (SI): The Modern Metric System
IEEE SI 10-2002 Use of the International System of Units (SI): The Modern Metric System
IEEE 322-1972 Recommended Practice: Rules for the Use of Units of the International System of Units
IEEE SI 10-1997 Standard for Use of the International System of Units (SI): the Modern Metric System (Revision and Redesignation of ANSI/IEEE Std 268-1992 and ASTM E380)

AT-ON, international unit

ONORM A 6432-1986 International System of Units (SI); SI units, decimal multiples and sub-multiples of SI units, units outside the SI

Association Francaise de Normalisation, international unit

NF L22-413:1973 Hexagon thin nuts. Sim thread (rech.).
NF L22-412:1973 Hexagon reduced nuts. Sim thread (rech.).
NF L22-411:1973 Ordinary hexagon nuts. Sim thread (rech.).
NF Z69-100:1988 INFORMATION PROCESSING. REPRESENTATION OF SI AND OTHER UNITS IN SYSTEMS WITH LIMITED CHARACTER SETS.
NF X02-006:1994 Fundamental standards. The international systems of units. Description and rules for use. Choice of multiples and sub-multiples.
NF E29-678:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 16,4, taper 3/20, 14 TPI si.
NF E29-682:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 34 - taper 8,732 % (5o) - Pitch 2 SI
NF E29-682:1980 Gas cylinders. Taper screw thread for valve stem and culinder neck assembly. Nominal diameter 34 taper 8 732 per cent (5 degrees), pitch 2 si.
NF E29-680:2015 Gas cylinders - Taper screw thread for valve stem and cylinder neck assembly - Nominal diameter 25,8, taper 3/26 (6o 38'), 14 Tpi SI
NF E29-680:1980 Gas cylinders. Taper screw thread for valve stem and cylinder neck assembly. Nominal diameter 25,8, taper 3/26 (6 degrees 38', 14 tpi si.

Institute of Electrical and Electronics Engineers (IEEE), international unit

IEEE Std 268A-1980 IEEE International System of Units Conversion Factors Card
IEEE 267A-1980 IEEE International System of Units Conversion Factors Card
IEEE 322-1971 IEEE Recommended Practice: Rules for the Use of Units of the International System of Units
IEEE Std 322-1971*ANSI Z210.2-1972 IEEE Recommended Practice: Rules for the Use of Units of the International System of Units
IEEE/ASTM SI 10/COR-2005 Use of the International System of Units (SI): The modern metric system; Errata
IEEE/ASTM SI 10-2002 Use of the International System of Units (SI): The Modern Metric System
IEEE/ASTM SI 10/COR-1998 Use of the international system of units (SI): The modern metric system; Correction
IEEE 260.1-2004 Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE 260.1-1993 Letter symbols for units of measurement (SI units, customary inch-pound units, and certain other units)
IEEE PSI 10/D2, October 2010 IEEE Draft Standard for Use of the International System of Units (SI): The Modern Metric System
IEEE PSI-10/D1, May 2010 IEEE Draft Standard for Use of the International System of Units (SI): The Modern Metric System
IEEE 270-2006 Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)
IEEE Std P270/D10d, Sep 2005 IEEE Draft Standard Definitions for Selected Quantities, Units, and Related Terms, With Special Attention to the International System (SI) of Units
IEEE/ASTM SI 10-1997 IEEE/ASTM SI-10 Standard for Use of the International System of Units (SI):The Modern Metric System (Replaces ASTM E380 and ANSI/IEEE Std 268-1992)

PT-IPQ, international unit

NP 172-1986 Système International d'Unités

AENOR, international unit

UNE 40305:1975 MAGNITUDES AND UNITS OF APPLICATION IN TEXTILE INDUSTRY. INTERNATIONAL SYSTEM OF SI UNITS.

AASHTO - American Association of State Highway and Transportation Officials, international unit

R 1-2004 Standard Recomended Practice for Use of the International System of Units
MDM-3 CD-2005 Model Drainage Manual (U.S. and SI Units) (Revision 3)
R1-2000 Standard Recomended Practice for Use of the International System of Units (Twentieth Edition; IEEE/ASTM SI 10-1997)

American Concrete Institute, international unit

ACI 546.2R-2020 Guide to Underwater Repair of Concrete (IN-LB Units and SI Units)
ACI 310.1-2020 Specification for Polished Concrete Slab Finishes (IN-LB Units and SI Units)
ACI 435R-2020 Report on Deflection of Nonprestressed Concrete Structures (IN-LB Units and SI Units)
ACI 211.7R-2020 Guide for Proportioning Concrete Mixtures with Ground Calcium Carbonate and Other Mineral Fillers (IN-LB Units and SI Units)

Japanese Industrial Standards Committee (JISC), international unit

JIS Z 8203:1985 Si units and the use of their multiples and of certain other units
JIS Z 8203:2000 SI units and recommendations for the use of their multiples and of certain other units

American National Standards Institute （ANSI), international unit

ANSI/SAE J1278-1993 SI (Metric) Synchronous Belts and Pulleys
ANSI/ASTM F1332:1999 Practice for Use of SI [Metric] Units in Maritime Applications (Committee F-25 Supplement to E 380)
ANSI/IEEE/ASTM SI10:2011 Standard for Use of the International System of Units (SI): The Modern Metric System
ANSI/IEEE Std260.1:1993 American National Standard Letter Symbols for Units of Measurement ( SI Units, Customary Inch-Pound Units, and Certain Other Units)
ANSI/IEEE 270:2006 Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)

API - American Petroleum Institute, international unit

API MPMS 15.1-1973 Manual of Petroleum Measurement Standards Chapter 15 Section 1 Metric Practice Guide A Guide to the Use of SI-The International Systems of Units (SECOND EDITION; Formerly Publ 2563)
API 2563-1970 METRIC PRACTICE GUIDE (A GUIDE TO THE USE OF SI-THE INTERNATIONAL SYSTEM OF UNITS)

American Institute of Aeronautics and Astronautics (AIAA), international unit

AIAA R-021-1992 Recommended Practice Spacecraft System Design in SI Units

AIAA - American Institute of Aeronautics and Astronautics, international unit

R-021-1992 Recommended Practice Spacecraft System Design in SI Units

The American Road & Transportation Builders Association, international unit

AASHTO LRFD SI ERTA 2-2007 AASHTO LRFD Bridge Design Specifications - SI Units Revision 4
AASHTO LRFD SI-1998 AASHTO LRFD Bridge Design Specifications - SI Units Second Edition; Interim Specifications 1999, 2000, 2001, 2002, 2003
AASHTO R1-2000 Standard Recomended Practice for Use of the International System of Units Twentieth Edition; IEEE/ASTM SI 10-1997

RU-GOST R, international unit

GOST 20403-1975 Rubber. Method for determination hardness in international units (30 to 100 IRHD)

Canadian General Standards Board （CGSB), international unit

CAN/CGSB-4.2 NO.5.2-M87-1987 Textile Test Methods Linear Density of Yarn in SI Units

International Organization for Standardization (ISO), international unit

ISO 1000:1981 SI units and recommendations for the use of their multiples and of certain other units

CU-NC, international unit

NC 90-00-12-1985 Metrological Assurance. International Unit System. Basic Physical Constants
NC 90-00-13-1985 Metrological Assurance. International Unit System. Inch-Millmetor and Eillmeter-Inch Converaion

ES-AENOR, international unit

UNE 5-002-1984

SE-SIS, international unit

SIS MNC 1110-1973 Mechanical stress and impact strength. Meta/lic materia/s. Conversion to SI units

TH-TISI, international unit

TIS 230-2007 Si units and recommendations for the use of their multiples and of certain other units

German Institute for Standardization, international unit

DIN 66030:2002 Information technology - Representation of SI and other units in systems with limited character sets