ZH
RU
ES

unfilled thermoplastic

unfilled thermoplastic, Total:350 items.

In the international standard classification, unfilled thermoplastic involves: Welding, brazing and soldering, Industrial furnaces, Dentistry, Plastics, Materials for aerospace construction, Adhesives, Pipeline components and pipelines, Installations in buildings, Construction materials, Rubber and plastics products, Fluid storage devices, External sewage systems, Raw materials for rubber and plastics, Road vehicle systems, Rubber, Paint ingredients, Surface treatment and coating, Packaging materials and accessories, Equipment for the chemical industry, Elements of buildings, Equipment for petroleum and natural gas industries, Petroleum, petroleum products and natural gas handling equipment, Aerospace electric equipment and systems, Electrical wires and cables.

AENOR, unfilled thermoplastic

UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
UNE-EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
UNE-EN 12573-1:2001 Welded static non-pressurized thermoplastic tanks - Part 1: General principles.
UNE-EN 1277:2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
UNE-EN 12573-2:2001 WELDED STATIC NON-PRESSURISED THERMOPLASTICS TANKS. PART 2: CALCULATION OF VERTICAL CYLINDRICAL TANKS.
UNE-EN 12573-4:2001 Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints
UNE-EN 12573-3:2001 WELDED STATIC NON-PRESSURISED THERMOPLASTICS TANKS. PART 3: DESIGN AND CALCULATION FOR SINGLE SKIN RECTANGULAR TANKS.
UNE-EN ISO 13846:2001 Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure. (ISO 13846:2000)
UNE-EN ISO 13229:2012 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
UNE-EN 1119:2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements

German Institute for Standardization, unfilled thermoplastic

DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN 12943:1999 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN ISO 13263:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010); German version EN ISO 13263:2017
DIN EN ISO 13267:2022-09 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022); German and English version prEN ISO 13267:2022 / Note: Date ...
DIN EN 1053:1995 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness; German version EN 1053:1995
DIN EN ISO 13264:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010); German version EN ISO 13264:2017
DIN EN ISO 13268:2022-09 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022); German and English version prEN ISO 13268:2022 /...
DIN EN ISO 13254:2018 Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
DIN EN ISO 13262:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
DIN EN ISO 13262:2018-01 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010); German version EN ISO 13262:2017
DIN EN ISO 13264:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
DIN EN ISO 13266:2022-09 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022); German and Engli...
DIN 65629:1993-12 Aerospace; fabric sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification
DIN 65572:1992-11 Aerospace; unidirectional sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification
DIN EN ISO 13267:2023-09 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022); German version EN ISO 13267:2023
DIN EN ISO 13257:2019 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
DIN EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010)
DIN EN ISO 13268:2023-09 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022); German version EN ISO 13268:2023
DIN CEN/TS 14632:2012-05*DIN SPEC 19939:2012-05 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity; German version CEN/TS 1463...
DIN 65672:2009-07 Aerospace - Continuous filament fibre reinforced laminates with non-reactive thermoplastics - Preparation of test panels; Text in German and English
DIN EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
DIN 65629:1993 Aerospace; fabric sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification
DIN EN ISO 13846:2001-01 Plastic piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000); German version EN ISO 13846:2000

Danish Standards Foundation, unfilled thermoplastic

DS/EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
DS/EN 14680:2007 Adhesives for non-pressure thermoplastic piping systems - Specifications
DS/EN 1053:1996 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
DS/EN 12573-1:2001 Welded static non-pressurised thermoplastic tanks - Part 1: General principles
DS/EN 1277:2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
DS/EN 12573-2:2001 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks
DS/EN 12573-4:2001 Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints
DS/ISO 15398:2013 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
DS/EN ISO 13846:2001 Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure
DS/EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
DS/EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics
DS/EN 1119:2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements

Lithuanian Standards Office , unfilled thermoplastic

LST EN 12943-2001 Filler materials for thermoplastics - Scope, designation, requirements, tests
LST EN 14680-2007 Adhesives for non-pressure thermoplastic piping systems - Specifications
LST EN 1053-2002 Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
LST EN 12573-1-2000 Welded static non-pressurized thermoplastic tanks - Part 1: General principles
LST EN 1277-2004 Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
LST EN 12573-2-2000 Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks
LST EN 12573-4-2002 Welded static non-pressurised thermoplastic tanks - Part 4: Design and calculation of flanged joints
LST EN ISO 13846:2002 Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000)
LST EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
LST EN 1119-2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements

Association of German Mechanical Engineers, unfilled thermoplastic

DVS 2211-1979 "Filler materials for thermoplastics - Scope, designation, requirements, tests"
DVS 2211-2005 "Weling of thermoplastics - Welding fillers - Marking, requirements and tests"
DVS 2207-3 Beiblatt 3-2013 "Welding of thermoplastics - High-speed hot gas welding and hot gas welding with the torch separate from the filler rod of pipes, piping parts and panels - Welding of fluoroplastics"
DVS 2207-3 Beiblatt 3-2009 "Welding of thermoplastics - High-speed hot gas welding and hot gas welding with the torch separate from the filler rod of pipes, piping parts and panels - Welding of fluoroplastics"
DVS 2215-3 Beiblatt 1-1998
DVS 2215-3-1998
DVS 2207-3-2013 "Welding of thermoplastics - Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets - Methods, requirements"
DVS 2207-3-2005 "Welding of thermoplastics - Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets - Methods, requirements"
DVS 2207-3 Beiblatt 1-2013 "Welding of thermoplastics - High-speed hot gas welding and hot gas welding with the torch separate from the filler rod of pipes, piping parts and panels - Welding parameters"
DVS 2207-3 Beiblatt 1-2009 "Welding of thermoplastics - High-speed hot gas welding and hot gas welding with the torch separate from the filler rod of pipes, piping parts and panels - Welding parameters"
DVS 2208-2-1978 Welding of thermoplastics; machines and equipment for hot-gas welding (not extrusion welding)
DVS 2205-2 Beiblatt 2-2015
DVS 2205-2 Beiblatt 2-2014
DVS 2205-2 Beiblatt 2-2002
DVS 2207-6-2002
DVS 2207-6-2003 "Welding of thermoplastics - Non-contact heated tool butt welding of pipes, pipeline components and sheets - Methods, equipment, parameters"
DVS 2205-2 Beiblatt 3-2014
DVS 2205-2 Beiblatt 3-2002
DVS 2205-2 Beiblatt 3-2015
DVS 2205-2 Beiblatt 6-2011 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Shell construction method"
DVS 2205-2 Beiblatt 6-2008 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Shell construction method"
DVS 2205-2 Beiblatt 6-2015
DVS 2205-2 Beiblatt 6-2014
DVS 2205-2 Beiblatt 6-2010
DVS 2207-3 Beiblatt 2-2013 "Welding of thermoplastics - Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets - Requirements for welding equipment and accessories"
DVS 2207-3 Beiblatt 2-2005 "Welding of thermoplastics - Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets - Requirements for welding equipment and accessories"
DVS 2205-2 Beiblatt 7-2012 Calculation of tanks and apparatus made of thermoplastics - Vertical round non-pressurised tanks - Ring-supported conical bottom
DVS 2205-2 Beiblatt 9-2012 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Parallel-supported sloping base"
DVS 2205-2 Beiblatt 9-2011 "Calculation of tanks and apparatus made of thermoplastics - Vertical round, non-pressurised tanks - Parallel-supported sloping base"
DVS 2205-2 Beiblatt 8-2015
DVS 2205-2 Beiblatt 8-2014
DVS 2205-2 Beiblatt 8-2011
DVS 2205-2 Beiblatt 8-2010
DVS 2205-2 Beiblatt 8-2009
DVS 2205-2 Beiblatt 5-2015
DVS 2205-2 Beiblatt 5-2014
DVS 2205-2 Beiblatt 5-2012
DVS 2205-2 Beiblatt 10-2015
DVS 2205-2 Beiblatt 10-2014
DVS 2205-2 Beiblatt 10-2011
DVS 2205-2 Beiblatt 10-2010

Association Francaise de Normalisation, unfilled thermoplastic

NF T51-400*NF EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests.
NF EN 12943:2000 Produits d'apport pour thermoplastiques - Domaine d'application, désignation, exigences, essais
NF P85-515:1985 Sealants. Plastic type mastics for packing seals. Determination of resistance to heat.
NF P85-411:1987 Sealing profiles, joinery products. Profiles between door leaf and door frame. Plasticized PVC thermoplastic material.
NF T54-901*NF EN ISO 13254:2017 Thermoplastics piping systems for non-pressure applications - Test method for watertightness
NF EN 16556:2014 Détermination du temps ouvert maximal des adhésifs thermoplastiques pour bois pour applications non structurales
NF T54-939*NF EN ISO 13264:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
NF T54-925*NF EN ISO 13262:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
NF EN ISO 13257:2018 Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de résistance à des cycles de température élevée
NF T31-310-6:2012 Pigments and extenders - Methods of dispersion and assessment of dispersability in plastics - Part 6: determination by film test
NF T31-310-5:2005 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5 : determination by filter pressure value test.
NF T57-228:2009 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP).
NF T57-228:2013 Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
NF T31-310-2:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2 : determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling.
NF T57-215*NF EN 1119:2009 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
NF M87-232-1*NF EN ISO 23936-1:2010 Petroleum, petrochimical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1 : thermoplastics

Society of Automotive Engineers (SAE), unfilled thermoplastic

SAE AMS3641-1946 PLASTIC MOLDING - THERMOSETTING Phenol Formaldehyde-Macerated Fabric Filled
SAE AMS3643B-2004 Plastic Moldings, Silicone, Thermosetting Glass Roving Filled Heat Resistant
SAE AMS3643-1964 PLASTIC MOLDINGS, THERMOSETTING Glass Roving Filled Silicone, Heat Resistant
SAE AMS3643A-2011 PLASTIC MOLDINGS, THERMOSETTING Silicone, Glass Roving Filled, Heat Resistant
SAE AMS3641A-1953 PLASTIC MOLDINGS, THERMOSETTING Phenol Formaldehyde, Macerated Fabric Filled
SAE AMS3641B-1978 PLASTIC MOLDINGS, THERMOSETTING Phenol/Formaldehyde, Macerated-Fabric-Filled
SAE AMS3641C-1991 PLASTIC MOLDINGS, THERMOSETTING Phenol/Formaldehyde, Macerated-Fabric-Filled
SAE AMS3641D-1992 PLASTIC MOLDINGS, THERMOSETTING Phenol/Formaldehyde, Macerated-Fabric-Filled
SAE AMS3643B-1992 Plastic Moldings, Silicone, Thermosetting Glass Roving Filled Heat Resistant
SAE AMS3643C-2011 Plastic Moldings, Silicone, Thermosetting Glass Roving Filled, Heat Resistant
SAE AMS3579D-2012 Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3579C-2003 Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3579-1979 PLASTIC TUBING, ELECTRICAL INSULATION Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3579B-2011 PLASTIC TUBING, ELECTRICAL INSULATION Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3579A-1978 PLASTIC TUBING, ELECTRICAL INSULATION Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio
SAE AMS3579D-1996 Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio

European Committee for Standardization (CEN), unfilled thermoplastic

EN 12943:1999 Filler materials for thermoplastics - Scope, designation, requirements, tests
EN ISO 23900-1:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction
EN 13765:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification (Incorporates Amendment A1: 2015)
EN 13900-5:2005 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test
EN ISO 23936-1:2022 Oil and gas industries including lower carbon energy - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2022)
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
EN ISO 23900-2:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
EN ISO 13846:2000 Plastics Piping Systems - End-Load-Bearing and Non-End-Load-Bearing Assemblies and Joints for Thermoplastic Pressure Piping - Test Method for Long-Term Leaktightness Under Internal Pressure ISO 13846:2000

Taiwan Provincial Standard of the People's Republic of China, unfilled thermoplastic

CNS 7455-1981 Dental Plastic Filling Instruments

ZA-SANS, unfilled thermoplastic

SANS 1655:2004 Welding of thermoplastics - Welding rods, fillers and solvents

(U.S.) Ford Automotive Standards, unfilled thermoplastic

FORD ESH-M4D166-C-1980 POLYPROPYLENE, TALC FILLED-, HEAT STABILIZED, INJECTION MOLDING COMPOUND
FORD WSS-M4D670-B1-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER, (TEO) MOLDING COMPOUND, <12% MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D853-A-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPUR), IMPACT MODIFIED, 20 % MINERAL FILLED MOLDING COMPOUND
FORD WSK-M4D714-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27% MINERAL FILLED MOLDING COMPOUND PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D873-B1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D873-B1-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D873-B1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D845-A-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 5 % MINERAL FILLED MOLDING COMPOUND, INTERIOR
FORD ESB-M3D118-C-2004 PHENOLIC INJECTION MOLDING COMPOUND HEAT RESISTANT - MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D550-A10-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, MOLDED IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D873-B3-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 20% MINERAL FILLED, HIGH IMPACT, LOW CLTE, MOLDING COMPOUND, MOLD-IN-COLOR ONLY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D873-B3-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 20% MINERAL FILLED, HIGH IMPACT, LOW CLTE, MOLDING COMPOUND, MOLD-IN-COLOR ONLY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M4D341-A2-1981 POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED MINERAL FILLED Shown on ESE-M4D341-A1
FORD WSS-M4D1005-A1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, MOLD-IN-COLOR ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1005-A1-2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, MOLD-IN-COLOR ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D550-A10-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D550-A10-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D550-A10-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D906-B1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD-WSS-M99P1111-A-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C945-B1-2017 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD-WSK-M4D895-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 20% TALC FILLED, MEDIUM HIGH IMPACT, MOLDING COMPOUND, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D873-A3-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 20% MINERAL FILLED, LOW THERMAL EXPANSION, HIGH IMPACT MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D568-A-2005 THERMOPLASTIC POLYURETHANE (TPU) MOLDING COMPOUND, 40% LONG GLASS FIBER FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D550-A9-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TE0) 22% MINERAL FILLED MEDIUM IMPACT MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D550-A-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MEDIUM HIGH IMPACT MOLDING COMPOUND, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1039-A1-2013 THERMOPLASTIC OLEFIN ELASTOMER (TPO), 10% MINERAL FILLED, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D550-A-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MEDIUM HIGH IMPACT MOLDING COMPOUND, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D713-A8-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 5% WOLLASTONITE FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1005-A1-2008 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, MOLD-IN-COLOR ONLY, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1061-A1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 5% MINERAL FILLED, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1005-A2-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D1005-A1
FORD WSS-M4D738-A3-2009 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 20% MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D845-A-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 5% MINERAL FILLED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WRS-M4D670-B4-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER, (TEO) MOLDING COMPOUND, <12% MINERAL FILLED, RECYCLED GRADE, 90% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D670-B1)
FORD WRS-M4D670-B3-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER, (TEO) MOLDING COMPOUND, <12% MINERAL FILLED, RECYCLED GRADE, 75% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D670-B1)
FORD WRS-M4D670-B2-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER, (TEO) MOLDING COMPOUND, <12% MINERAL FILLED, RECYCLED GRADE, 25% PCR AND/OR PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D670-B1)
FORD WSK-M4D714-A-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27 % MINERAL FILLED, COLOR PIGMENTED INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1057-A1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 24% MINERAL FILLED, MOLD IN COLOR, HIGH IMPACT, UV STABILIZED, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D952-A3-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED MOLDING COMPOUND, FULLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D954-A-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 30% MINERAL FILLED, COLOR PIGMENTED, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D952-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED MOLDING COMPOUND, UV STABILIZED, MOLD-IN-COLOR, PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D873-B4-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 20% MINERAL FILLED, HIGH IMPACT, LOW CLTE, MOLDING COMPOUND, FULLY PAINTED ONLY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D873-B3)
FORD WSK-M4D550-A4-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 24% MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D713-A9-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1005-A2-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1005-A1)
FORD WSS-M4D1005-A2-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1005-A1)
FORD WSS-M4D1067-A2-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, LOW STIFFNESS, 17% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1067-A1)
FORD WSS-M4D550-A11-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), 18% TALC FILLED HIGH IMPACT, MOLDED IN COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D644-A4-2011 POLYPROPYLENE (PP) HOMOPOLYMER, 40% MINERAL MIX FILLED HIGH HEAT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D699-A-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D911-B)
FORD WSS-M4D873-B2-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, PAINTABLE OVER GRAIN, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D873-B1)
FORD WSS-M4D873-B2-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, PAINTABLE EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D873-B1)
FORD WSB-M4D713-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 4% MINERAL FILLED, HIGH IMPACT, PAINTABLE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D952-A3)
FORD WSB-M4D713-A3-2005 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) POST INDUSTRIAL REPROCESSED, MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D713-A4-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D492-B2)
FORD WSS-M4D550-A7-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE OR MOLDED-IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1005-B2-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, LOW DENSITY, <17% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, FASCIA / THIN-WALLED EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M4D1005-B1)
FORD WSK-M4D873-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 10% MINERAL FILLED, PAINTABLE VIRGIN AND/OR RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1005-A2-2008 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), HIGH MELT FLOW, 22% MINERAL FILLED, FULLY PAINTED ONLY, MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M4D1005-A1
FORD ESF-M4D341-C-2005 POLYESTER, THERMOPLASTIC (PBT), 15% GLASS FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D492-A1-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MINERAL FILLER,COLOR PIGMENTED. PAINTED APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D713-A9-2008 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D961-A4-2009 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 12% MINERAL, COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, LOW CLTE, MOLD-IN-COLOR AND PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D873-A2-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 10% MINERAL FILLED, PAINTABLE VIRGIN AND/OR RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D492-A4-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), MINERAL FILLER - COLOR PIGMENTED - HIGHER MOLD SHRINKAGE - PAINTED, APPLICATIONS ONLY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D952-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED, REACTOR GRADE MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D952-A2, and WSS-M4D952-A3)

British Standards Institution (BSI), unfilled thermoplastic

BS EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
BS 2782-11 Method 1112A:1989 Methods of testing plastics. Thermoplastics pipes, fittings and valves. Leaktightness of thermoplastics pipes and fittings for non-pressure applications
BS EN ISO 13263:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
BS EN 14680:2015 Adhesives for non-pressure thermoplastics piping systems. Specifications
BS ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
BS EN ISO 13254:2017 Thermoplastics piping systems for non-pressure applications. Test method for watertightness
BS EN ISO 13267:2023 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
BS EN 13900-1:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - General introduction
BS ISO 13775-1:2021 Thermoplastic tubing and hoses for automotive use. Non-fuel applications
BS ISO 12493:2023 Rubber, vulcanized or thermoplastic. Determination of stress in tension under non-isothermal condition
BS EN ISO 13264:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
BS EN ISO 13262:2017 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
20/30409938 DC BS ISO 13267. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
BS EN ISO 13268:2023 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
BS ISO 23900-1:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. General introduction
20/30409935 DC BS ISO 13268. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
BS 6374-2:1984 Lining of equipment with polymeric materials for the process industries - Specification for lining with non-sheet applied thermoplastics
BS EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
BS ISO 15398:2012 Specifications for thermoplastics covers And frames for manholes and inspection chambers used in non-traffic areas
BS EN ISO 13266:2023 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
BS 2782-11 Method 1109A:1989 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
20/30409941 DC BS ISO 13266. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
BS ISO 23900-6:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by film test
BS EN 13900-5:2005 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination by filter pressure value test
BS EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
BS ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
BS 2782-11 Method 1110:1989 Methods of testing plastics - Thermoplastics pipes, fittings and valves - Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications
BS EN ISO 13846:2001 Plastics piping systems. End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping. Test method for long-term leaktightness under internal water pressure
BS EN 13900-2:2003 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
BS ISO 23900-2:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
BS EN 13766:2010 Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
BS EN 13766:2018+A1:2020 Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
BS ISO 23900-5:2015 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by filter pressure value test
BS EN ISO 13260:2011 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
21/30426897 DC BS ISO 13775-1. Thermoplastic tubing and hoses for automotive use - Part 1. Non-fuel applications
BS EN ISO 23900-2:2018 Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
BS EN ISO 23936-1:2022 Oil and gas industries including lower carbon energy. Non-metallic materials in contact with media related to oil and gas production. Thermoplastics
BS 7029-2:1993 Method of specifying thermoplastics injection mouldings - Additional requirements for polycarbonate, polyamide and polyethylene mouldings
BS EN 1989:2000 Thermoplastics piping systems. Joints for buried non-pressure sewerage applications. Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure
BS EN 13900-4:2004 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling
DD CEN/TS 14632:2006 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure — Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) — Guidance for the assessment of conformity
BS ISO 13259:2010 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints

Cooling Technology Institute, unfilled thermoplastic

CTI STD-136-2010 Thermoplastic Materials Used for Film Fill, Splash Fill, Louvers And Drift Eliminators

SAE - SAE International, unfilled thermoplastic

SAE AMS3641E-1995 PLASTIC MOLDINGS@ THERMOSETTING PHENOL/FORMALDEHYDE@ MACERATED-FABRIC-FILLED
SAE AMS3579E-2017 Plastic Tubing@ Electrical Insulation Non-Crosslinked Polyvinyl Chloride@ Flexible@ Heat Shrinkable 1.6 to 1 Shrink Ratio

Aerospace Industries Association, unfilled thermoplastic

AIA NAS 281-1947 (Inactive)Tubing - Thermoplastic (Rev. 1)
AIA NAS 279-1947 (Inactive)Tubing Fabricated from Thermoplastic Materials, Specification for (Rev. 1)

GM North America, unfilled thermoplastic

GM 9984817-1989 Primer - Flexible, Thermoset, Nonconductive for Plastics
GM GMP.TPU.018-1993 Thermoplastic Polyurethane Alloy - 10% Mineral Filled, 450 MPa Flexural Modulus
GM GMP.TPU.019-1993 Thermoplastic Polyurethane Alloy - 20% Mineral Filled, 250 MPa Flexural Modulus
GM GMP.TPU.010-1991 Thermoplastic Polyurethane - 24% Glass Filled, 1325 MPa Flexural Modulus, Low Density
GM GMP.E/P.090-2001 Thermoplastic Elastomer - Polyolefinic, Shore A87, Barium Sulfate Filled Underhood Applications
GM GMP.TPU.020-1993 Thermoplastic Polyurethane Alloy - 20% Glass Filled, 1200 MPa Flexural Modulus, Low Density
GM GMP.TES.006-2002 Thermoplastic Elastomer - Styrene Block Copolymer, Shore A89, Barium Sulfate Filled, Underhood Applications
GM GMP.TPU.007-2003 Thermoplastic Polyurethane Alloy 10% Glass Fiber Reinforced, 10% Mineral Filled, 1300 MPa Flexural Modulus
GM GMP.TPU.011-1991 Thermoplastic Polyurethane Alloy - 10% Glass Fiber Reinforced, 10% Mineral Filled, 2200 MPa Flexural Modulus
GM GMP.TPU.013-2003 Thermoplastic Polyurethane Alloy 15% Glass Fiber Reinforced, 15% Mineral Filled, 400 MPa Flexural Modulus

RO-ASRO, unfilled thermoplastic

STAS 9664-1974 PLASTICS Determination of change in linear dimensions of non-rigid thermoplaslics films

未注明发布机构, unfilled thermoplastic

BS EN ISO 13263:2017(2018) Thermoplastics piping systems for non - pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
BS EN ISO 13254:2017(2018) Thermoplastics piping systems for non - pressure applications - Test method for watertightness
BS ISO 13267:2022 Thermoplastics piping systems for non - pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
BS EN ISO 13264:2017(2018) Thermoplastics piping systems for non - pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
BS ISO 13268:2022 Thermoplastics piping systems for non - pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
BS ISO 10639:2017 Plastics piping systems for pressure and non - pressure water supply — Glass - reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

ES-UNE, unfilled thermoplastic

UNE-EN ISO 13263:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)
UNE-EN 14680:2016 Adhesives for non-pressure thermoplastics piping systems - Specifications
UNE-EN ISO 13264:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings (ISO 13264:2010)
UNE-EN ISO 13267:2023 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
UNE-EN ISO 13262:2018 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
UNE-EN ISO 13268:2023 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
UNE-EN ISO 13266:2023 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)

American National Standards Institute （ANSI), unfilled thermoplastic

ANSI/ASME NM.3.1-2020 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ASME NM.3.1-2022 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ANSI/ASME NM.3.2-2020 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications
ASME NM.3.2-2022 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications

American Society of Mechanical Engineers (ASME), unfilled thermoplastic

ASME NM.3.1-2020 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ASME RTP-1d Addenda-1998 Reinforced thermoset plastic corrosion resistant equipment; Addenda
ASME RTP-1e Addenda-1999 Reinforced thermoset plastic corrosion resistant equipment; Addenda
ASME NM.3.2-2020 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications

International Organization for Standardization (ISO), unfilled thermoplastic

ISO 2557-1:1989 Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified maximum reversion — Part 1: Bars
ISO/FDIS 13265:2024 Thermoplastics piping systems for non-pressure underground drainage and sewerage
ISO 2557-2:1979 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 2: Test specimens in the form of rectangular plates (Injection moulding)
ISO 13257:2018 Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
ISO 15398:2012 Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
ISO 13775-1:2021 Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
ISO 23900-1:2015 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction
ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
ISO 27126:2021 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
ISO 23900-6:2015 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test
ISO 10639:2004/Amd 1:2011 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin; Amendment 1
ISO 23900-2:2015 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics
ISO 13846:2000 Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaklightness under internal water pressure
ISO 23900-5:2015 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test

Japanese Industrial Standards Committee (JISC), unfilled thermoplastic

JIS K 7152-5:2007 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy

International Federation of Trucks and Engines, unfilled thermoplastic

NAVISTAR CEMS DT-3-2001 Methods of Determining Glass and PTFE Fillers in Thermoplastic Urethane

American Society for Testing and Materials (ASTM), unfilled thermoplastic

ASTM D7436-12 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D7436-11 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM D1204-07 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-02 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-94e1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-08 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1204-14 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

CEN - European Committee for Standardization, unfilled thermoplastic

PREN 15229-2005 Plastics piping systems - Piping systems for non-pressure underground drainage and sewerage - Performance requirements for thermoplastics manholes and inspection chambers
EN ISO 23900-6:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test
EN ISO 23900-5:2018 Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test

United States Navy, unfilled thermoplastic

NAVY QPL-24249-5 NOTICE 2-2008 PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF

U.S. Military Regulations and Norms, unfilled thermoplastic

ARMY QPL-49137-36 NOTICE 1-2008 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, MOLDED, CONFORMAL COATED AND METAL CASED WITH PLASTIC END-FILL, NONHERMETICALLY SEALED, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-49137 D-2009 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, MOLDED, CONFORMAL COATED AND METAL CASED WITH PLASTIC END-FILL, NONHERMETICALLY SEALED, GENERAL SPECIFICATION FOR
ARMY QPL-49137-29-2011 Capacitors, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Molded, Conformal Coated and Metal Cased with Plastic End-Fill, Nonhermetically Sealed, General Specification for
ARMY QPL-49137-2013 Capacitors, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Molded, Conformal Coated and Metal Cased with Plastic End-Fill, Nonhermetically Sealed, General Specification for

ES-AENOR, unfilled thermoplastic

European Association of Aerospace Industries, unfilled thermoplastic

AECMA PREN 6036-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Notched, Unnotched and Filled Hole Compression Strength Edition P1

国家能源局, unfilled thermoplastic

SY/T 6770.3-2018 Specifications for quality acceptance of non-metallic pipes Part 3: Thermoplastic lined fiberglass reinforced plastic composite pipes
SY/T 6770.5-2016 Specifications for Quality Acceptance of Non-metallic Pipes Part 5: Fiber Reinforced Thermoplastic Composite Coiled Pipes
SY/T 6769.3-2018 Specifications for the disign,construction and acceptance of non-metallic pipelines.Part 3:Anticorrosion plastic alloy composite pipes
SY/T 6662.7-2016 Non-metallic composite pipes for the oil and gas industry Part 7: Thermoplastic lined fiberglass composite pipes
SY/T 6769.5-2016 Specifications for the design, construction and acceptance of non-metallic pipelines Part 5: Fiber-reinforced thermoplastic composite coiled pipes

CZ-CSN, unfilled thermoplastic

CSN 77 0312-1982 Testing of the influence of fluid fillings on the weld strength of thermoplastic and combined packaging materials

PL-PKN, unfilled thermoplastic

PN-EN ISO 13259-2021-01 E Thermoplastics piping systems for underground non-pressure applications--Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

Standard Association of Australia （SAA）, unfilled thermoplastic

AS 3571.2:2009/Amdt 1:2009
AS 3571.2:2009
AS 3571.1:2009/Amdt 1:2009
AS 3571.1:2009
AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors - Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials

Group Standards of the People's Republic of China, unfilled thermoplastic

T/NBRTT 003-2023 Halogen-free flame retardant thermoplastic elastomer sheathing material for new energy vehicle charging pile cables

DE-GPVA, unfilled thermoplastic

AD 2000-Merkblatt N1-2006 Pressure vessels made of non-metallic materials.Pressure vessels in glass fibre reinforced thermosetting plastics
AD 2000-Merkblatt N1-2014 Pressure vessels made of non-metallic materials.Pressure vessels in glass fibre reinforced thermosetting plastics

CH-SNV, unfilled thermoplastic

SN EN ISO 13259:2020 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)

Professional Standard - Petroleum, unfilled thermoplastic

SY 6662.7-2016 Non-metallic composite pipes for the oil and gas industry - Part 7: Thermoplastics-lined fiberglass composite pipes
SY/T 6662.4-2014 Non-metallic composite pipes for petroleum and natural gas industries.Part 4: Steel skeleton reinforced thermoplastic resin coiled composite pipes and end fittings
SY 6662.4-2014 Non-metallic composite pipe for the oil and gas industry - Part 4: Steel frame reinforced thermoplastic composite continuous pipe and joints

国家市场监督管理总局、中国国家标准化管理委员会, unfilled thermoplastic

GB/T 37997-2019 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification
GB/T 39248-2020 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification

GM Global, unfilled thermoplastic

GMW 16970-2013 Guidelines for Conducting Axial Load-Controlled Fatigue Testing of Neat, Filled, and Short Fiber Reinforced Thermoplastic Polymeric Materials Issue 1; English
GMW 15340-2011 Polyolefin Alloy - Talc Filled, High Stiffness, High Impact, Interior Thermoplastic Olefin Issue 2; English

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, unfilled thermoplastic

GB/T 34903.1-2017 Petroleum,petrochemical and natural gas industries—Non-metallic materials in contact with media related to oil and gas production—Part 1:Thermoplastics

BELST, unfilled thermoplastic

STB 1740-2007 Metal sandwich - panels with mineral wool or foam plastic infilling. Mineral wool and foam plastics. Methods of determination strength and modulus of elasticity in tension, in compression and in shear

Professional Standard - Machinery, unfilled thermoplastic

JB/T 8135.23-2013 Packaging of winding wires.Part 23:Cylindrical barrelled delivery spools.Specification for non-returnable spools made from thermoplastic material
JB/T 8135.33-2013 Packaging of winding wires.Part 33:Taper barrelled delivery spools.Specification for non- returnable spools made from thermoplastic material

Korean Agency for Technology and Standards (KATS), unfilled thermoplastic

KS M 3333-2020 Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics(GRP) systems based on unsaturated polyester(UP) resin