ZH
RU
ES

Solid Waste Identification

Solid Waste Identification, Total:499 items.

In the international standard classification, Solid Waste Identification involves: Wastes, Radiation protection, Analytical chemistry, Products of the textile industry, Textile fibres, Vocabularies, Soil quality. Pedology, Construction materials, Environmental protection, Protection against dangerous goods, Information sciences. Publishing, Shipbuilding and marine structures in general, Burners. Boilers, Water quality, Nuclear energy engineering, Plastics, Road engineering, Farming and forestry, Air quality, Transport, Company organization and management, Fertilizers, Energy and heat transfer engineering in general, Iron and steel products, Construction industry, Quality, Fuels, Products of non-ferrous metals, Services, Radiation measurements, Domestic, commercial and industrial heating appliances, Lubricants, industrial oils and related products, Power stations in general, Footwear, Geology. Meteorology. Hydrology, Microbiology, Fishing and fish breeding, Coals, Mining and quarrying.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solid Waste Identification

GB 34330-2017 Identification standards for solid wastes Generalrules
GB 41930-2022 Characterization of low level radioactive waste packages—Cemented waste
GB/T 15555.12-1995 Solid waste--Glass electrade test--Method of corrosivity
GB/T 15555.8-1995 Solid waste--Determination of total chromium--Titrimetric method
GB/T 15555.11-1995 Solid waste--Determination of fluoride--Ion selective electrode method
GB/T 15555.7-1995 Solid waste--Determination of chromium(VI)--Titrimetric method
GB/T 15555.10-1995 Solid waste--Determination of nikel--Dimethylglyoxime spectophotometric method
GB 11928-1989 Regulations for interim storage of low-and intermediate-level radioactive solid wastes
GB 13600-1992 Regulations for disposal of solid low-and intermediate level radioactive wastes in rock cavities
GB/T 15555.1-1995 Solid waste--Determination of total mercury--Cold atomic absorption spectrometry
GB 14569.3-1995 Characteristic requirements for solidified waste of low-and intermediate-level radioactive waste--Bitumen solidified waste
GB 14569.1-1993 Characteristic requirements for solidified waste of low and intermediate level radioactive waste. Cement solidified waste
GB 14569.2-1993 Characteristic requirements for solidified waste of low and intermediate level radioactive waste. Plastic solidified waste
GB 14569.1-2011 Performance requirements for low and intermediate level radioactive waste form-Cemented waste form
GB/T 7023-1986 Long-term leach testing of solidified radioactive waste forms
GB/T 15555.5-1995 Solid waste--Determination of total chromium--1,5-Diphenylcarbohydrazide spectrophotometric method
GB/T 15555.2-1995 Solid waste--Determination of copper, zinc, lead, cadmium-- Atomic absorption spectrometry
GB 30760-2014 Technical specification for coprocessing of solid waste in cement kiln
GB 5086.1-1997 Test method standard for leaching toxicity of solid wastes--Roll over leaching procedure
GB/T 15555.4-1995 Solid waste--Determination of chromium(VI)--1,5-Diphenylcarbohydrazide spectrophotometric method
GB 9134-1988 The technical rules about solid radioactive waste processing system for light water reactor plants
GB/T 32326-2015 Assessment guidelines for integrated utilization technology of industrial solid waste
GB 5085-1985 Pollution control standard of solid waste in nonferrous metal industry
GB 14589-1993 Technical rules for interim storage of low and inter-mediate level solid radioactive waste from nuclearpower plant
GB 16487.1-2005 Environmental protection control standard for imported solid wastes as raw materials.Wastes of bones
GB 16487.12-2005 Environmental protection control standard for imported solid wastes as raw materials.Waste and scrap of plastics
GB 16487.5-2005 Environmental protection control standard for imported solid wastes as raw materials.Waste and scrap of fibres
GB 16487.6-2005 Environmental protection control standard for imported solid wastes as raw materials.Waste and scrap of iron and steel
GB 16487.8-2005 Environmental protection control standard for imported solid wastes as raw materials.Waste electric motors
GB/T 15555.9-1995 Solid waste--Determination of nickel--Flame atomic absorption spectrometry
GB 5086.2-1997 Test method standard for leaching toxicity of solid wastes--Horizontal vibration extraction procedure
GB 15562.2-1995 Graphical signs for environmental protectior solid waste storage (disposal) site
GB 12711-1991 Standard of safety for low and intermediate-level solid radioactive wastes packages
GB 30485-2013 Standard for pollution control on co-processing of solid wastes in cement kiln
GB/T 15555.6-1995 Solid waste--Determination of total chromium--Flame atomic absorption spectrometry
GB/T 15555.3-1995 Solid waste--Determination of arsenic--Silver diethyldithiocarbamate spectrophotometric method
GB/T 16487.9-2005 Environmental protection control standard for imported solid wastes as raw materials.Waste wires and cables
GB 16487.10-2005 Environmental protection control standard for imported solid wastes as raw materials.Metal and electrical appliance scraps
GB 16487.13-2005 Environmental protection control standard for imported solid wastes as raw materials.Compressed piece of scrap automobile
GB 16487.4-2005 Environmental protection control standard for imported solid wastes as raw materials.Waste and scrap of paper or paperboard
GB 16487.7-2005 Environmental protection control standard for imported solid wastes as raw materials.Nonferrous metal scraps
GB 16487.9-2005 Environmental protection control standard for imported solid wastes as raw materials.Waste wires and cables
GB 16487.3-2005 Environmental protection control standard for imported solid wastes as raw materials.Wood and wood articles wastes
GB 18599-2001 Standard for pollution on the storage and disposal site for general industrial solid wastes
GB/T 5087-1985 Test method standard for corrosivity of solid waste in nonferrous metal industry
GB/T 7023-2011 Standard test method for leachability of low and intermediate level solidified radioactive waste forms

Professional Standard - Agriculture, Solid Waste Identification

SN/T 5571-2023 Solid Waste Identification Sampling Guidelines
SN/T 5572-2023 General procedures for identification of solid waste properties of imported goods
SN/T 5061-2018 General method for attribute identification of imported metallurgical solid waste
SN/T 5590.1-2023 Guidelines for Identification of Solid Wastes of Imported Mechanical and Electrical Products Used Mechanical Hard Disks
GB 15562.2-1995(XG1-2023) Environmental protection pictorial sign - solid waste storage (disposal) site

中华人民共和国环境保护部, Solid Waste Identification

公告 2006年第11号 Solid Waste Identification Guidelines (Trial)
(HJ 711-2014) Solid waste —Determination of phenolic compounds —Gas chromatography
GB 9132-1988 Regulations for shallow ground disposal of solid low-land-intermediate-level radioactive wastes
GB 7023-1986 Long-term leach testing of solidified radioactive waste forms
GB 9132-2018 Safety requirements for near surface disposal of low and medium level radioactive solid waste
GB 16487.13-2017 Environmental protection control standard for imported solid wastes as raw materials—compressed piece of scrap automobile

Professional Standard - Nuclear Industry, Solid Waste Identification

EJ 1186-2005 Characterization of radioactive waste forms and packages
EJ 1042-2014 Containers for low and intermediate level radioactive solid waste.Steel drum
EJ 1076-2014 Container for low and intermediate level radioactive solid waste.Steel box
EJ 1076-1998 Container for low-and intermediate - level radioactive solid wastes Steel box
EJ 914-2000 Concrete container for low-and intermediate-level radioactive solid wastes
EJ/T 20197-2018 Operation requirements for pyrolysis and incineration of low-level combustible solid waste
EJ/T 20156-2018 Requirements for pretreatment of low- and intermediate-level solid waste for decommissioning production reactors
EJ 1042-1996 Packaging container for low - and intermediate - level radioactive solid wastes steel drum
EJ/T 20158-2018 Requirements for decontamination of low- and medium-level radioactive solid waste by high-pressure water jetting

Professional Standard - Commodity Inspection, Solid Waste Identification

SN/T 2293.5-2009 Classification and Identification of Imported Solid Waste as Raw Materials Part 5: Waste Paper
SN/T 2293.2-2009 Classification and Identification of Imported Solid Wastes as Raw Materials Part 2: Waste Plastics
SN/T 2293.3-2009 Classification and Identification of Imported Solid Wastes as Raw Materials Part 3: Iron and Steel Scrap
SN/T 2293.6-2009 Classification and identification of imported solid waste that can be used as raw materials - Part 6: Scrap metal
SN/T 2293.4-2009 Classification and identification of imported solid wastes that can be used as raw materials - Part 4: Waste non-ferrous metals
SN/T 2293.7-2009 Classification and identification of imported solid waste that can be used as raw materials - Part 7: Waste textile raw materials
SN/T 2293.1-2009 Classification and Identification of Imported Solid Wastes as Raw Materials Part 1: Guidelines
SN/T 2293.8-2009 Classification and Identification of Imported Solid Wastes as Raw Materials Part 8: Slag
SN/T 3011.1-2011 Identification of import solid waste ralated with metal minerals by X-ray diffraction.Part 1:General rules
SN/T 2885-2011 Test method of inflammability for import solid waste materials
SN/T 1791.4-2018 Inspection and Quarantine Regulations for Imported Solid Waste that Can Be Used as Raw Materials Part 4: Iron and Steel Scrap
SN/T 1791.8-2018 Imported solid waste that can be used as raw materials for inspection and quarantine Part 8: waste electric motors
SN/T 1791.1-2018 Inspection and Quarantine Regulations for Imported Solid Waste as Raw Materials Part 1: Waste Plastics
SN/T 1791.6-2018 Inspection and Quarantine Regulations for Imported Solid Waste that Can Be Used as Raw Materials Part 6: Waste Hardware and Electrical Appliances
SN/T 1791.7-2018 Inspection and Quarantine Regulations for Imported Solid Wastes that Can Be Used as Raw Materials Part 7: Waste Wires and Cables
SN/T 1791.9-2018 Imported solid waste that can be used as raw materials for inspection and quarantine Part 9: Waste non-ferrous metals
SN/T 1791.11-2018 Inspection and Quarantine Regulations for Imported Solid Waste that Can Be Used as Raw Materials Part 11: Compressed Parts of Scrap Automobiles
SN/T 1791.13-2018 Imported solid waste that can be used as raw materials for inspection and quarantine Part 13: waste paper or cardboard
SN/T 0008-2009 General rules for drafting inspection and quarantine standards of imported solid wastes as raw materials
SN/T 1791.3-2018 Imported solid waste that can be used as raw materials for inspection and quarantine Part 3: Wood and wood product waste

IN-BIS, Solid Waste Identification

US-FCR, Solid Waste Identification

FCR NAV MO-213-1990 SOLID WASTE MANAGEMENT
FCR AF R91-8-1990 SOLID WASTE MANAGEMENT
FCR NAV DM-5.10-1986 SOLID WASTE DISPOSAL
FCR AF I32-7042 SUPP 1-1995 SOLID AND HAZARDOUS WASTE COMPLIANCE
FCR 40 CFR PART 240-2014 GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES
FCR 40 CFR PART 240-2015 GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES
FCR 40 CFR PART 240-2013 GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES
FCR AF I32-7042-1994 SOLID AND HAZARDOUS WASTE COMPLIANCE
FCR 40 CFR PART 255-2014 IDENTIFICATION OF REGIONS AND AGENCIES FOR SOLID WASTE MANAGEMENT
FCR 40 CFR PART 255-2015 IDENTIFICATION OF REGIONS AND AGENCIES FOR SOLID WASTE MANAGEMENT
FCR 40 CFR PART 255-2013 IDENTIFICATION OF REGIONS AND AGENCIES FOR SOLID WASTE MANAGEMENT
FCR 40 CFR PART 258-2014 CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS
FCR 40 CFR PART 258-2015 CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS
FCR 40 CFR PART 258-2013 CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS
FCR 40 CFR PART 256-2014 GUIDELINES FOR DEVELOPMENT AND IMPLEMENTATION OF STATE SOLID WASTE MANAGEMENT PLANS
FCR 40 CFR PART 256-2015 GUIDELINES FOR DEVELOPMENT AND IMPLEMENTATION OF STATE SOLID WASTE MANAGEMENT PLANS
FCR 40 CFR PART 256-2013 GUIDELINES FOR DEVELOPMENT AND IMPLEMENTATION OF STATE SOLID WASTE MANAGEMENT PLANS
FCR AF M91-11-1974 REAL PROPERTY OPERATION AND MAINTENANCE SOLID WASTE MANAGEMENT
FCR AF M91-11 CHANGE 2-1984 REAL PROPERTY OPERATION AND MAINTENANCE SOLID WASTE MANAGEMENT
FCR 40 CFR PART 257-2011 CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES
FCR 40 CFR PART 257-2014 CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES
FCR 40 CFR PART 257-2015 CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES
FCR 40 CFR PART 241-2011 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS
FCR 40 CFR PART 241-2014 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS
FCR 40 CFR PART 241-2015 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS
FCR 40 CFR PART 243-2014 GUIDELINES FOR THE STORAGE AND COLLECTION OF RESIDENTIAL, COMMERCIAL, AND INSTITUTIONAL SOLID WASTE
FCR 40 CFR PART 243-2015 GUIDELINES FOR THE STORAGE AND COLLECTION OF RESIDENTIAL, COMMERCIAL, AND INSTITUTIONAL SOLID WASTE
FCR 40 CFR PART 243-2013 GUIDELINES FOR THE STORAGE AND COLLECTION OF RESIDENTIAL, COMMERCIAL, AND INSTITUTIONAL SOLID WASTE
FCR COE EL-93-12 FINAL REPORT-1993 AN EVALUATION OF STABILIZATION/SOLIDIFICATION OF A K088 SPENT POTLINER WASTE

Group Standards of the People's Republic of China, Solid Waste Identification

T/SHCDA 000001-2020 Attribute identification and management for solid wastes of water-based architectural coatings
T/CSTM 00548-2022 Light aggregate with high strength prepared from solid waste
T/ZJATA 0001-2021 Solid waste- determination of calorific value for sludge- bomb calorimetry
T/SDGSY 9-2022 Ceramsite Disposing Solid Waste With Fly Ash
T/NMRJ 011-2023 Guidelines for management of non-hazardous industrial solid wastes
T/CBMMA 6-2022 Rotary Kiln for Solid Hazardous Waste Incineration
T/SDGSY 12-2022 Preparation of ceramsite by compounding fly ash and solid waste
T/GDACERCU 0008-2020 Management standard of industrial solid wastes in Guangdong province
T/CACE 037-2021 Specification on solid waste recycling technology verification
T/QGCML 502-2022 Technical Requirements for Municipal Solid Waste Treatment and Disposal
T/SGX 004-2018 Rapid distinguish of imported recycled plastic pellet and imported solid plastic waste
T/CACE 062-2022 Guidelines for test of industrial solid waste recycling technology
T/ZAEPI 014-2023 Syngas Produced by Co-processing of Solid Wastes with Coal Water Mixture
T/CAEPI 68-2023 Assessment guidelines for greenhouse gas emission reduction benefits from solid waste resource utilization
T/CAEPI 69-2023 General Guidelines for Environmental Risk Assessment of Solid Waste Recycling Products
T/CASME 148-2022 Technical requirements for combustion decarbonization treatment of industrial solid wastes
T/CAEE 002-2022 Technical Guidelines for The Evaluation of Pyrolysis Treatment of Organic Solid Wastes
T/CAEPI 60-2023 Guidelines for resource and environmental attribute assessment of industrial solid waste
T/CIECCPA 003-2020 Evaluation Guide for Comprehensive Utilization of Industrial Solid Waste Resources
T/SDGSY 10-2022 Technical specifications for the production of ceramsite from fly ash compound solid waste
T/GDACERCU 0017-2021 Requirements on collection, storage and transportation of municipal biomass solid waste for fuel
T/GDACERCU 0012-2020 Technical Guidelines for comprehensive utilization of industrial solid waste in Guangdong province
T/CI 015-2023 Technical guidelines for soil formation of typical bulk solid wastes
T/CACE 049-2022 Evaluation guideline of the technical value on solid waste recycling technology
T/CQSES 01-2021 Technical Guide for Health Risk Assessment of Solid Waste Recycling
T/SDGSY 13-2022 Technical specification for ceramsite production from fly ash co-processing solid waste
T/CACE 050-2022 Technical specification for multi-dimensional performance evaluation of solid waste recycling technology
T/LCH 004-2023 Technical specifications for the extraction of lithium-containing electrolytic aluminum solid waste to produce lithium carbonate
T/LCH 005-2023 Technical specification for lithium carbonate raw material production from lithium-containing electrolytic aluminum solid waste
T/CACE 031-2021 General guidelines for life cycle assessment of building material products from solid wastes
T/HBSES 001-2022 Guidelines for Environmental Management of Solid Waste in Onshore Oil and Gas Exploitation Industry
T/CBCA 010-2021 Technical regulations for the application of bulk solid waste in road engineering
T/BSRS 103-2023 Container for low level radioactive solid waste--Basalt composite box
T/XZFW 004-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
T/GDC 1-2019 Solid Waste Recovery and Recycling Code for CL&G Concrete

Taiwan Provincial Standard of the People's Republic of China, Solid Waste Identification

CNS 13348-1994 Method of Test for pH Valve of Solid Waste

Association Francaise de Normalisation, Solid Waste Identification

NF X30-488*NF EN 16377:2013 Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste
NF EN 16377:2013 Caractérisation des déchets - Détermination des retardateurs de flamme bromés (BFR) dans les déchets solides
NF X31-212:2011 Caractérisation des déchets - Détermination du caractère solide massif
NF X31-211:2012 Caractérisation des déchets - Essai de lixiviation d'un déchet solide initialement massif ou généré par un procédé de solidification
XP X30-493*XP CEN/TS 16675:2018 Waste - Test methods for the determination of the monolithic status of waste to be landfilled
NF X30-480:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates.
NF M60-325:2005 Energie nucléaire - Technologie du cycle du combustible - Déchets - Détermination de l'activité du tritium dans les effluents et déchets par scintillation liquide
XP CEN/TS 16675:2018 Caractérisation des déchets - Méthodes d'essai pour la détermination du statut monolithique d'un déchet à mettre en stockage
NF M03-006:1994 Solid mineral fuels. Determination of fixed carbon content.
NF M60-338:2015 Measurement of bêta activity in effluents and waste by liquid scintillation counting method
NF P16-700-7*NF EN 12255-7:2002 Wastewater treatment plants - Part 7 : biological fixed-film reactors.
NF EN 12574-3:2017 Conteneurs fixes à déchets - Partie 3 : exigences d'hygiène et de sécurité
NF ISO 22946:2020 Sûreté-criticité - Déchets solides à l'exclusion du combustible nucléaire irradié et non irradié
NF G38-190*NF EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
NF X34-105:2010 Solid biofuels - Determination of bulk density.
NF EN ISO 18123:2023 Biocombustibles solides - Détermination des matières volatiles
NF M60-320:2004 Nuclear energy - Nuclear fuel technology - Waste - Determination of carbone 14 activity in waste by liquid scintillation.
NF M60-316:2002 Nuclear energy - Nuclear fuel technology - Waste - Strontium 90 assay in liquid or solid waste after a preliminary chemical separation
NF H96-113-3*NF EN 12574-3:2017 Stationary waste containers - Part 3 : safety and health requirements
FD X30-454*FD CEN/TR 14589:2003 Characterization of waste - State of the art document - Chromium VI speciation in solid matrices
FD CEN/TR 14589:2003 Caractérisation des déchets - État de l'art - Spéciation du chrome VI dans les matrices solides
NF EN 13257:2016 Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les ouvrages d'enfouissement des déchets solides

CEN - European Committee for Standardization, Solid Waste Identification

PREN 12574-4-2015 Stationary waste containers - Part 4: Waste-Mechatronics
EN 15216:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates
EN 13257:2014 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals

European Committee for Standardization (CEN), Solid Waste Identification

EN 16377:2013 Characterization of waste - Determination of Brominated Flame Retardants (BFR) in Solid Waste
PD CEN/TS 16675:2014 Characterisation of waste - Test methods for the determination of the monolithic status of waste
CEN/TS 16675:2018 Waste - Test methods for the determination of the monolithic status of waste to be landfilled
CEN EN 15308-2008 Characterization of waste — Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
EN 779:2002 Particulate air filters for general ventilation - Determination of the filtration performance
EN 779:1993 Particulate Air Filters for General Ventilation - Requirements, Testing, Marking
EN 15308:2016 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
EN 13257:2014+A1:2015 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
EN 12255-7:2002 Wastewater treatment plants - Part 7: Biological fixed-film reactors

German Institute for Standardization, Solid Waste Identification

DIN EN 16377:2013-12 Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste; German version EN 16377:2013
DIN EN 16377:2013 Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste; German version EN 16377:2013
DIN 30741-1:1992-11 Garbage containers; garbage containers for special wastes; with a capacity 800 l for solid special wastes
DIN CEN/TS 16675:2018-10*DIN SPEC 11558:2018-10 Waste - Test methods for the determination of the monolithic status of waste to be landfilled; German version CEN/TS 16675:2018
DIN 30742-1:1995-04 Waste disposal engineering - Waste containers for liquid and solid special waste - Part 1: Containers with a capacity from 60 l to 240 l made from metal material
DIN EN 15216:2008 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates; English version of DIN EN 15216:2008-01
DIN EN 12255-7:2002-04 Wastewater treatment plants - Part 7: Biological fixed-film reactors; German version EN 12255-7:2002
DIN EN 13257:2016-12 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals; German version EN 13257:2016
DIN EN 12574-3:2017-05 Stationary waste containers - Part 3: Safety and health requirements; German version EN 12574-3:2017
DIN 51719:1997 Testing of solid fuels - Solid mineral fuels - Determination of ash content

AENOR, Solid Waste Identification

UNE-EN 16377:2014 Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste
UNE-EN 15216:2008 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates
UNE-EN 12255-7:2003 Wastewater treatment plants - Part 7: Biological fixed-film reactors.
UNE-EN 12574-3:2017 Stationary waste containers - Part 3: Safety and health requirements

海关总署, Solid Waste Identification

SN/T 5431.3-2022 Methods for identification of imported solid waste Textile raw materials and products Part 3: Fabrics
SN/T 5431.2-2022 Identification method of imported solid waste Textile raw materials and products Part 2: Yarn
SN/T 5431.5-2022 Methods for identification of imported solid waste Textile raw materials and products Part 5: Fibers
SN/T 5431.1-2022 Methods for identification of imported solid waste Textile raw materials and products Part 1: General principles
SN/T 3011.1-2020 Identification of the physical phase of imported solid waste of metal minerals by X-ray diffraction method Part 1: General principles
SN/T 5431.4-2022 Methods for identification of imported solid waste Textile raw materials and products Part 4: Leather and fur

British Standards Institution (BSI), Solid Waste Identification

BS EN 16377:2013 Characterization of waste. Determination of brominated flame retardants (BFR) in solid waste
15/30323523 DC BS EN 12574-4. Stationary waste containers. Part 4. Waste-Mechatronics
BS EN 15216:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates
BS ISO 20048-2:2023 Solid biofuels. Determination of off-gassing and oxygen depletion characteristics - Operational method for screening of carbon monoxide off-gassing
BS EN 12574-3:2006 Stationary waste containers - Safety and health requirements
BS EN 12574-3:2002 Stationary waste containers - Safety and health requirements
BS EN 12574-3:2017 Tracked Changes. Stationary waste containers. Safety and health requirements
BS PD CEN/TS 16675:2014 Characterisation of waste. Test methods for the determination of the monolithic status of waste
BS PD CEN/TS 16675:2018 Waste. Test methods for the determination of the monolithic status of waste to be landfilled
BS EN 13257:2014 Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals
BS EN 15308:2016 Characterization of waste. Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
BS EN 12574-2:2002 Stationary waste containers - Performance requirements and test methods
BS EN 12574-2:2006 Stationary waste containers - Performance requirements and test methods
BS EN 13071-1:2008 Stationary waste containers up to 5000 l, top lifted and bottom emptied - General requirements
BS ISO 24297:2022 Guidelines for treatment and reuse of leachate from municipal solid waste (MSW) incineration plants

API - American Petroleum Institute, Solid Waste Identification

API REFINERY SOLID-1978 THE 1976 API REFINERY SOLID WASTE SURVEY Part 1: Solid Waste Quantities
API REFINERY SOLID-1983 THE 1982 REFINERY SOLID WASTES SURVEY
API PUBL 4520-1991 Evaluation of a Draft Method for Ignitability of Solid Wastes
API DR 148-1997 Identification of Organic Toxicants in Treated Refinery Effluents
API ONS-1989 Onshore Solid Waste Management in Exploration and Production Operations
API PUBL 4595-1995 Criteria for pH in Onshore Solid Waste Management in Exploration and Production Operations

VN-TCVN, Solid Waste Identification

TCVN 6705-2009 Normal solid wastes.Classification
TCVN 7241-2003 Health care solid waste incinerators.Determination method of dusts concentration in fluegas
TCVN 6560-2005 Health care solid waste incinerators.Emission standards for health care solid waste incinerators.Permissible limits
TCVN 7245-2003 Health care solid waste incinerator.Determination method of nitrogen oxides (NOx) concentration in fluegas
TCVN 7244-2003 Health care solid waste incinerators.Determination method of hydrochloric acid concentration (HCI) in fluegas
TCVN 7243-2003 Health care solid waste incinerators.Determination method of hydrofloride acid concentration (HF) in fluegas
TCVN 7242-2003 Health care solid waste incinerators.Determination method of carbon monoxide concentration (CO) in fluegas
TCVN 7246-2003 Health care solid waste incinerator.Determination method of sulfur dioxides (SO2) concentration in fluegas
TCVN 7380-2004 Health care solid waste incinerators.Technical requirements
TCVN 7381-2004 Health care waste incinerator.Method of appraisement
TCVN 6696-2009 Solid wastes.Sanitary landfill.General requirements to the environmental protection
TCVN 7733-2007 Water quality.Effluent standards for leachate of solid waste landfill sites
TCVN 7556-3-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDD/PCDF.Part 3: Identification and quantification
TCVN 7558-2-2005 Solid waste incinerators.Determination of total concentration of organic compounds in fluegas.Part 2: Turbidity method
TCVN 7556-1-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDDs/PCDFs.Part 1: Sampling
TCVN 7558-1-2005 Solid waste incinerators.Determination of total concentration of organic compounds in fluegas.Part 1: Spectrophotometry method
TCVN 7557-1-2005 Health care solid waste incinerators.Determination of heavy metals in fluegas.Part 1: General requirements

GB-REG, Solid Waste Identification

REG 40 CFR PART 240-2011 GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES
REG 40 CFR PART 255-2011 IDENTIFICATION OF REGIONS AND AGENCIES FOR SOLID WASTE MANAGEMENT
REG 40 CFR PART 258-2011 CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS
REG 40 CFR PART 256-2011 GUIDELINES FOR DEVELOPMENT AND IMPLEMENTATION OF STATE SOLID WASTE MANAGEMENT PLANS
REG 40 CFR PART 257-2011 CRITERIA FOR CLASSIFICATION OF SOLID WASTE DISPOSAL FACILITIES AND PRACTICES
REG 36 CFR PART 6-2011 SOLID WASTE DISPOSAL SITES IN UNITS OF THE NATIONAL PARK SYSTEM
REG 40 CFR PART 243-2011 GUIDELINES FOR THE STORAGE AND COLLECTION OF RESIDENTIAL, COMMERCIAL, AND INSTITUTIONAL SOLID WASTE

PL-PKN, Solid Waste Identification

PN Z15006-1993 Municipal solid wastes. Determination of morphological composition

U.S. Environmental Protection Agency (U.S. EPA), Solid Waste Identification

EPA 40 CFR PART 255-2010 IDENTIFICATION OF REGIONS AND AGENCIES FOR SOLID WASTE MANAGEMENT
EPA 40 CFR PART 256-2010 GUIDELINES FOR DEVELOPMENT AND IMPLEMENTATION OF STATE SOLID WASTE MANAGEMENT PLANS
EPA 40 CFR PART 241-2011 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS

Professional Standard - Environmental Protection, Solid Waste Identification

HJ 1024-2019 Gravimetric method for determination of thermal ignition loss rate of solid waste
HJ 711-2014 Solid waste.Determination of phenolic compounds.Gas chromatography
HJ 975-2018 Solid waste-Determination of benzene and its analogies-Headspace-gas chromatography
HJ 761-2015 Solid waste-Determination of organic matter-Ignition loss method
HJ 1222-2021 Gravimetric method for determination of moisture and dry matter content of solid waste
HJ 976-2018 Determination of Benzene Series in Solid Waste by Headspace Gas Chromatography-Mass Spectrometry
HJ 768-2015 Determination of Organophosphorus Pesticides in Solid Waste by Gas Chromatography
HJ 999-2018 Determination of Fluorine in Solid Waste by Alkali Fusion-Ion Selective Electrode Method
HJ 782-2016 Waste solid-- Extraction of organic compounds -- Pressurized fluid extraction（PFE）
HJ 760-2015 Solid waste—Determination of volatile organic compounds — Headspace-gas chromatography method
HJ 765-2015 Waste solid-Distilling of organic compound - Microwave extraction
HJ 712-2014 Solid waste.Determination of total phosphorus.Ammonium metamolybdate spectrophotometric method
HJ 892-2017 Determination of Polycyclic Aromatic Hydrocarbons in Solid Waste by High Performance Liquid Chromatography
HJ 891-2017 Determination of Polychlorinated Biphenyls in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ 950-2018 Determination of Polycyclic Aromatic Hydrocarbons in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ 951-2018 Determination of semi-volatile organic compounds in solid waste by gas chromatography-mass spectrometry
HJ 766-2015 Solid Waste–Determination of metals–Inductively coupled plasma mass spectrometry (ICP-MS)
HJ 643-2013 Solid waste -Determination of volatile organic compounds- Headspace-gas chromatography/mass method
HJ 912-2017 Determination of Organochlorine Pesticides in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ/T 20-1998 Technical specifications on sampling and sample preparation from industry solid waste
HJ 588-2010 Technical guidelines for agricultural solid waste pollution control
HJ 2035-2013 Technical guidelines for solid waste treatment & disposition engineering
HJ 767-2015 Determination of Barium in Solid Waste - Graphite Furnace Atomic Absorption Spectrophotometry
HJ 749-2015 Solid Waste-Determination of total chromium -Flame atomic absorption spectrometry
HJ 1250-2022 Technical Guidelines for Self-monitoring of Pollutant Discharging Units Industrial Solid Waste and Hazardous Waste Treatment
HJ 750-2015 Determination of Total Chromium in Solid Waste - Graphite Furnace Atomic Absorption Spectrophotometry
HJ 751-2015 Solid Waste—Determination of Nickel and Copper—Flame Atomic Absorption Spectrometry
HJ 702-2014 Solid Waste— Determination of Mercury, Arsenic, Selenium, Bismuth, Antimony— Microwave Dissolution / Atomic Fluorescence Spectrometry
HJ 1091-2020 Technical Guidelines for Pollution Prevention and Control of Solid Waste Recycling
HJ 714-2014 Solid wastes-Determination of volatile halohydrocarbons -Headspace gas chromatography mass method
HJ 787-2016 Solid waste-Determination of Lead and Cadmium - Graphite Furnace Atomic Absorption Spectrometry
HJ 786-2016 Solid waste—Determination of Lead，Zinc and Cadmium—Flame Atomic Absorption Spectrometry
HJ 781-2016 Solid waste – Determination of 22 metal elements – Inductively coupled plasma optical emission spectrometry
HJ 1033-2019 Pollutant Discharge Permit Application and Issuance Technical Specification Industrial Solid Waste and Hazardous Waste Treatment
HJ 874-2017 Solid waste-Determination of acrolein, acrylonitrile and acetonitrile-Headspace gas chromatography method
HJ 1211-2021 Determination of Inorganic Elements in Solid Waste by Wavelength Dispersive X-ray Fluorescence Spectrometry
HJ/T 299-2007 Solid waste. Extraction procedure for leaching toxicity. Sulphuric acid & nitric acid method
HJ 557-2010 Solid waste.Extraction procedure for leaching toxicity.Horizontal vibration method
HJ 687-2014 Solid waste.Determination of Hexavalent Chromium.Alkaline digestion/flame atomic absorption spectrophotometic
HJ 713-2014 Solid wastes-Determination of volatile halohydrocarbons- Purge and trap gas chromatography mass spectrometry
HJ 752-2015 Solid Waste—Determination of Beryllium, Nickel, Molybdenum and Copper—Graphite Furnace Atomic Absorption Spectrometry
HJ 85-2005 Technical standard of solid waste cleaning for reservoir bed of the three gorges on yangtze river
HJ/T 85-2002 Technical specifications for solid waste cleaning at the bottom of the Yangtze River Three Gorges Reservoir
HJ 1205-2021 Self-monitoring Technical Guidelines for Discharge Units Solid Waste Incineration
HJ/T 300-2007 Solid waste. Extraction procedure for leaching toxicity. Acetic acid buffer solution method
HJ 662-2013 Environmental protection technical specification for co-processing of Solid wastes in cement kiln
HJ 693-2014 Stationary source emission.Determination of nitrogen oxides.Fixed potential by electrolysis method
HJ 1025-2019 Post-column Derivatization-High Performance Liquid Chromatography for the Determination of Carbamate Pesticides in Solid Waste

American Society for Testing and Materials (ASTM), Solid Waste Identification

ASTM D5198-92(2003) Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM E1109-18 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-19 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D4842-90(1996) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM D4842-90(2001) Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
ASTM D3987-12(2020) Standard Practice for Shake Extraction of Solid Waste with Water
ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D5232-92(2003) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D8273-20 Standard Practice for Determination of Total and Available Cyanide in Solid Waste and Soil after Alkaline Extraction
ASTM D5198-92(1997) Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM D5198-09 Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM E889-82(1996) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM E889-82(2023) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM D5232-92(1997) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5232-92(2008) Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5232-19 Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D5232-13 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM E889-82(2004) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM D4843-88(2004) Standard Test Method for Wetting and Drying Test of Solid Wastes
ASTM D4843-88(2004)e1 Standard Test Method for Wetting and Drying Test of Solid Wastes
ASTM D5231-92(2003) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D5231-92(2008) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D5231-92(2016) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D5198-17 Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM E884-82(1993) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities
ASTM D3987-85(2004) Standard Test Method for Shake Extraction of Solid Waste with Water
ASTM D3987-85(1999) Standard Test Method for Shake Extraction of Solid Waste with Water
ASTM D4843-88(1999) Standard Test Method for Wetting and Drying Test of Solid Wastes
ASTM D4874-95(2006) Standard Test Method for Leaching Solid Material in a Column Apparatus
ASTM E889-82(2009) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM D4843-88(2009) Standard Test Method for Wetting and Drying Test of Solid Wastes
ASTM E889-82(2014) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM D4843-88(2016) Standard Test Method for Wetting and Drying Test of Solid Wastes
ASTM D3987-06 Standard Test Method for Shake Extraction of Solid Waste with Water
ASTM D3987-12 Standard Practice for Shake Extraction of Solid Waste with Water
ASTM D5231-92(1998) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM E2060-22 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes
ASTM D5368-93(2001) Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D5368-93 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D5368-93(2006) Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D5368-13 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM E884-82(2006) Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities

US-DOT, Solid Waste Identification

DOT 49 CFR PART 1155-2010 SOLID WASTE RAIL TRANSFER FACILITIES

中华全国供销合作总社, Solid Waste Identification

GH/T 1226-2018 Classification of solid waste from fruit processing
GH/T 1227-2018 Technical Guidelines for Resource Utilization of Solid Waste from Fruit Processing

RU-GOST R, Solid Waste Identification

GOST R 57701-2017 Resources saving. Waste treatment. Solid municipal waste management programs
GOST R 57742-2017 Resources saving. Waste treatment. Safety requirements for handling hazardous solid municipal waste collection
GOST R 57740-2017 Resources saving. Waste treatment. The requirements for accepting, segregating and packaging hazardous solid municipal waste
GOST R 56616-2015 Resources saving. Waste treatment. Characteristics of geotextiles and geotextile-related products required for use in solid waste disposals
GOST 6382-1991 Mineral solid fuel. Determination of volatile matter
GOST 28743-1993 Solid mineral fuel. Methods for determination of nitrogen
GOST 28743-1990 Coal. Determination of nitrogen. Semi-micro Kjeldahl method

Professional Standard - Railway, Solid Waste Identification

TB/T 2321-1992 Regulations of technical treatment for washing away solid waste from railway wagons

国家市场监督管理总局、中国国家标准化管理委员会, Solid Waste Identification

GB/T 39198-2020 Classification and code for general solid waste
GB/T 41015-2021 Technical requirements for solid waste vitrification product
GB/T 39197-2020 Principle and requirement for material flow data collection of general solid waste
GB/T 36845-2018 Detection and identification of Spiroplasma citri Saglio et al
GB 12711-2018 Standard of safety for low and intermediate level solid radioactive waste packages
GB/T 41012-2021 Technical specifications for collection and recovery of non-ferrous metal contained solid waste
GB 18599-2020 Standard for pollution control on the non-hazardous industrial solid waste storage and landfill
GB/T 38351-2019 Specifications for recycling and disposal of solid waste from manufacturing process of rubber shoes and sports footwear

Xinjiang Provincial Standard of the People's Republic of China, Solid Waste Identification

DB65/T 4372-2021 Determination of Petroleum in Solid Waste Infrared Spectrophotometry
DB65/T 3997-2017 Pollution Control Requirements for Comprehensive Utilization of Oil and Gas Field Drilling Solid Waste

US-CFR-file, Solid Waste Identification

CFR 40-241.3-2014 Protection of Environment. Part241:Solid wastes used as fuels or ingredients in combustion units. Section241.3:Standards and procedures for identification of non-hazardous secondary materials that are solid wastes when used as fuels or ingredients in comb

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Solid Waste Identification

GB/T 34911-2017 Terminology on comprehensive utilization of industrial solid wastes
GB/T 30760-2014 Technical specification for coprocessing of solid waste in cement kiln

Professional Standard-Ships, Solid Waste Identification

CB/T 8530-2017 Shipyard Solid Waste Disposal Design Regulations

Professional Standard - Aerospace, Solid Waste Identification

QJ 2215-1992 Composite solid propellant performance appraisal
QJ 2215A-2005 Composite solid propellant performance appraisal items and methods
QJ 1039-1986 Tactical missile solid rocket motor qualification test specification
QJ 1041-1986 Qualification test specification for strategic missile solid rocket motor

Shandong Provincial Standard of the People's Republic of China, Solid Waste Identification

DB37/T 1939-2011 Solid waste used in cement production
DB37/T 4542-2022 Determination of hexavalent chromium in solid waste by microwave digestion-inductively coupled plasma emission spectrometry
DB37/T 2704-2015 Determination of nitrogen oxides in exhaust gas from stationary pollution sources by ultraviolet absorption method
DB37/T 3784-2019 Chemiluminescence method for the determination of nitrogen oxides in exhaust gas from stationary pollution sources
DB37/T 3459-2018 Determination of Copper and Zinc in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province by Inductively Coupled Plasma Mass Spectrometry
DB37/T 3785-2019 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Danish Standards Foundation, Solid Waste Identification

DS/EN 15216:2008 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates
DS/EN 15308:2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
DS/EN 12255-7:2002 Wastewater treatment plants - Part 7: Biological fixed-film reactors
DS/EN 13257/A1:2005 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
DS/EN 13257/AC:2004 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
DS/EN 13257:2001 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
DS/EN 12574-3:2006 Stationary waste containers - Part 3: Safety and health requirements
DS/CEN/TR 14589:2003 Characterization of waste - State of the art document - Chromium VI specification in solid matrices

Lithuanian Standards Office , Solid Waste Identification

LST EN 15216-2008 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates
LST EN 15308-2008 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
LST EN 12255-7-2002 Wastewater treatment plants - Part 7: Biological fixed-film reactors
LST EN 13257-2002 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
LST EN 13257-2002/AC-2004 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
LST EN 13257-2002/A1-2005 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
LST EN 13257-2014 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
LST EN 12574-3-2006 Stationary waste containers - Part 3: Safety and health requirements

AT-ON, Solid Waste Identification

ONORM S 2116-5-2001 Examinations of solidified wastes - Determination of availability
ONORM S 2118-1-2001 Sample taking and sample preparation of solid wastes for the determination of the upper calorific value - Determination of the upper calorific value (Ho) of mechanical-biological pretreated wastes and similar materials

NZ-SNZ, Solid Waste Identification

NZS 9201.6:1999 Model General Bylaws Part 6: Solid Waste
NZS 9201.6:1999 Model General Bylaws Part 6: Solid Waste

Military Standard of the People's Republic of China-General Armament Department, Solid Waste Identification

GJB 9911-2021 Technical requirements for collection and disposal of solid waste on islands and reefs

Indonesia Standards, Solid Waste Identification

SNI 7184.3-2011 Characteristic of hazardous and poisonous material waste - Part 3: Test method of flash point in liquid and semi-solid waste
SNI 7117.17-2009
SNI 7184.4-2010

Professional Standard - Machinery, Solid Waste Identification

JB/T 9052-1999 General stipulations for the management of heat treatment salt bath hazardous solid waste pollution
JB/T 10863-2008 Eddy current separator for nonferrous metal
JB/T 6047-1992 Decontamination treatment method for harmful solid waste from heat treatment salt bath
JB/T 10863-2018 Solid waste treatment equipment Non-ferrous metal eddy current separator
JB/T 7519-1994 Harmful solid waste of heat treatment salt bath (barium salt and nitric salt) Analysis method
JB/T 11836-2015 Flue gas cleaning equipment for hazardous wastes incineration.Specification of operation and maintenance

国家机械工业局, Solid Waste Identification

JB 9052-1999 General Provisions for the Management of Hazardous Solid Waste Pollution from Thermal Treatment Salt Baths

Anhui Provincial Standard of the People's Republic of China, Solid Waste Identification

DB34/T 4340-2022 Technical Specifications for Forensic Evidence Identification of Mitochondrial DNA Species

Professional Standard - Military and Civilian Products, Solid Waste Identification

WJ 2090-1992 Solid Rocket Motor Qualification Test Requirements

SE-SIS, Solid Waste Identification

SIS SS-ISO 6961:1984 Long-term leach testing of solidified radioactive waste forms
SIS SS-ISO 6962:1984 Standard method for testing the long term alpha irradiation stability of solidi- fied high-level radioactive waste forms
SIS SS 18 71 57-1984 Solid mineral fuels - Determination of ash

Hubei Provincial Standard of the People's Republic of China, Solid Waste Identification

DB4201/T 674-2023 Technical regulations for construction solid waste landfill

国家质量监督检验检疫总局, Solid Waste Identification

SN/T 2884-2011 Explosiveness Inspection Procedures for Imported Solid Waste Raw Materials

Korean Agency for Technology and Standards (KATS), Solid Waste Identification

KS A ISO 11932:2012 Activity measurements of solid materials considered for recycling, re-use, or disposal as non-radioactive waste
KS M ISO 8634:2007 Solid fertilizers-Sampling plan for the evaluation of a large delivery
KS M ISO 8634:2013 Solid fertilizers－Sampling plan for the evaluation of a large delivery
KS K 0927-2021 Geotextiles and geotextile-related products —Characteristics required for use in solid waste disposals
KS J 0011-2019 Biotechnology ― Guide for identification of bacteriophage M13 and its DNA

Association of German Mechanical Engineers, Solid Waste Identification

VDI 3475 Blatt 3-2006 Emission control - Mechnical-biological treatment facilities for municipal solid waste
VDI 2095 Blatt 1-2011 Emission control - Treatment of mineral construction-site and demolition waste - Stationary and mobile demolition waste recycling facilities
VDI 3397 Blatt 2-2005 Maintenance of metalworking fluids - Measures for maintaining quality, and for reducing solid and liquid waste

Shanghai Provincial Standard of the People's Republic of China, Solid Waste Identification

DB31/T 669-2012 General requirements for containerized water transportation of solid waste
DB31/T 764-2013 Validation test methods for content of solid waste in inorganic building materials
DB31/T 918-2015 Technical requirements for vegetation ecological restoration on landfill site of municipa solid waste

AIAG - Automotive Industry Action Group, Solid Waste Identification

RC-7-1992 Solid Waste Management Packaging Material Guideline (Version 1)

Fujian Provincial Standard of the People's Republic of China, Solid Waste Identification

DB35/T 2067-2022 Rules for evaluating the performance of solid waste fuel for boilers

工业和信息化部, Solid Waste Identification

HG/T 20712-2022 Design and construction specifications for phosphorus chemical solid waste dump sites
JC/T 2615-2021 Specifications for Comprehensive Utilization of Solid Waste from Building Materials Manufacturing Enterprises

American Society of Mechanical Engineers (ASME), Solid Waste Identification

ASME A112.18.9-2011(R2022) Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures
ASME QMO-1-2000 Standard for the Qualification and Certification of Medical Waste Incinerator Operators

American National Standards Institute （ANSI), Solid Waste Identification

ANSI/ASME QHO-1-2004 Qualification and Certification of Hazardous Waste Incinerator Operators
ANSI/ANS 55.1-1992 Solid Radioactive Waste Processing System for Light Water Cooled Reactor Plants

环境保护部、国家质量监督检验检疫总局, Solid Waste Identification

GB 16487.8-2017 Environmental protection control standard for imported solid wastes as raw materials—Waste electric motors
GB 16487.12-2017 Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of plastics
GB 16487.6-2017 Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of iron and steel
GB 16487.10-2017 Environmental protection control standard for imported solid wastes as raw materials—Metal and electrical appliance scraps
GB 16487.9-2017 Environmental protection control standard for imported solid wastes as raw materials—Waste wires and cables
GB 16487.7-2017 Environmental protection control standard for imported solid wastes as raw materials—Nonferrous metal scraps
GB 16487.4-2017 Environmental protection control standard for imported solid wastes as raw materials—Waste and scrap of paper or paperboard
GB 16487.3-2017 Environmental protection control standard for imported solid wastes as raw materials—Wood and wood articles wastes

Professional Standard - Aviation, Solid Waste Identification

HB 6641-1992 Qualification test of air-to-air missile solid rocket motor

ACI - American Concrete Institute, Solid Waste Identification

ACI EB071-1991 Solidification and Stabalization of Waste Using Portland Cement

Professional Standard - Ferrous Metallurgy, Solid Waste Identification

YB/T 4487-2015 Technical specification for disposal and utilization of iron mine solid waste

Hebei Provincial Standard of the People's Republic of China, Solid Waste Identification

DB13/T 5215-2020 General Technical Guidelines for Magnetic Degradation of Organic Solid Waste
DB13/T 2376-2016 Determination of particulate matter in exhaust gas from stationary pollution sources β-ray method
DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

International Organization for Standardization (ISO), Solid Waste Identification

ISO 6962:1982 Standard method for testing the long term alpha irradiation stability of solidified high-level radioactive waste forms
ISO 24297:2022 Guidelines for treatment and reuse of leachate from municipal solid waste (MSW) incineration plants

Inner Mongolia Provincial Standard of the People's Republic of China, Solid Waste Identification

DB15/T 2228-2021 Technical Specifications for Comprehensive Utilization of Industrial Solid Waste Resources
DB15/T 2362-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Professional Standard - Building Materials, Solid Waste Identification

JC/T 2742-2022 Evaluation of comprehensive utilization of industrial solid waste resources Wall material manufacturers
JC/T 2741-2022 Comprehensive utilization evaluation of industrial solid waste resources for cement production enterprises

Chongqing Provincial Standard of the People's Republic of China, Solid Waste Identification

DB50/T 427-2012 ELISA for screening dioxins in soil, sediment and solid waste

Heilongjiang Provincial Standard of the People's Republic of China, Solid Waste Identification

DB23/T 2482-2019 Laser Scattering Method for Determination of Exhaust Gas Particles from Stationary Pollution Sources

FI-SFS, Solid Waste Identification

SFS 3037-1974

NL-NEN, Solid Waste Identification

NEN 6621-1988 Waste water and sludge - Determination of the content of suspended solids after drying and after ignition - Gravimetric method

Professional Standard - Geology, Solid Waste Identification

DZ/T 0373-2021 Index and calculation method of resource utilization of mine solid waste

Yunnan Provincial Standard of the People's Republic of China, Solid Waste Identification

DB53/T 970-2020 Technical specification for classified collection and treatment of agricultural and rural solid waste

Sichuan Provincial Standard of the People's Republic of China, Solid Waste Identification

DB51/T 3113-2023 Standards for evaluation of comprehensive utilization of industrial solid waste resources in Sichuan Province
DB51/T 2988-2022 Technical specifications for soil risk assessment of solid waste storage sites in Sichuan Province

Gansu Provincial Standard of the People's Republic of China, Solid Waste Identification

DB62/T 4391-2021 Determination of Exhaust Gas Particulates from Stationary Pollution Sources β-ray Absorption Method

Hunan Provincial Standard of the People's Republic of China, Solid Waste Identification

DB43/T 1986-2021 Standards for Evaluation of Demonstration Enterprises for Comprehensive Utilization of Industrial Solid Waste Resources

ES-UNE, Solid Waste Identification

UNE-EN 13257:2017 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals

Qinghai Provincial Standard of the People's Republic of China, Solid Waste Identification

DB63/T 1873-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Liaoning Provincial Standard of the People's Republic of China, Solid Waste Identification

DB21/T 3270-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
DB21/T 1958-2012 Mitochondrial COI Gene Sequence Method for DNA Identification of Aquatic Animals

Jiangxi Provincial Standard of the People's Republic of China, Solid Waste Identification

DB36/T 1386-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jilin Provincial Standard of the People's Republic of China, Solid Waste Identification

DB22/T 3426-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Standard Association of Australia （SAA）, Solid Waste Identification

AS/NZS 4013:1999 Domestic solid fuel burning appliances - Method for determination of flue gas emission

Canadian General Standards Board （CGSB), Solid Waste Identification

CGSB 9.2 NO. 1-94-CAN/CGSB-1994 Methods of Testing Pulp and Paper Mill Effluents and Water Determination of Solids Contents of Pulp and Paper Mill Effluents
CGSB 9.2 NO.2-94-CAN/CGSB-1994 Methods of Testing Pulp and Paper Mill Effluents and Water Determination of Biochemical Oxygen Demand (BOD)

Jiangsu Provincial Standard of the People's Republic of China, Solid Waste Identification

DB32/T 4535-2023 Technical Specifications for Rapid Monitoring of Exhaust Particulate Matter from Stationary Pollution Sources

Professional Standard - Electricity, Solid Waste Identification

DL/T 1281-2013 Technical code for pollution control on the storage and disposal site of coal-fired power plant solid waste

Guangxi Provincial Standard of the People's Republic of China, Solid Waste Identification

DB45/T 2479-2022 Specifications for hydrogeological engineering geological survey of general solid waste landfill

Professional Standard - Energy, Solid Waste Identification

NB/T 20621-2021 Design criteria for radioactive solid waste treatment system in pressurized water reactor nuclear power plant

National Fire Protection Association (NFPA), Solid Waste Identification

NFPA 704-2006 Standard System for the Identification of the Hazards of Materials for Emergency Response 2007 Edition

CZ-CSN, Solid Waste Identification

CSN 44 1377-2004 Solid minerál fuels - Determination of moisture

RO-ASRO, Solid Waste Identification

STAS 5265-1986 SOLID MINERAL FLELS Deterniinatiou of nsh