ZH
RU
ES
How to measure the aperture
How to measure the aperture, Total:141 items.
In the international standard classification, How to measure the aperture involves: Plastics, Civil engineering in general, Semiconductor devices, Analytical chemistry, Products of the chemical industry, Earth-moving machinery, Products of the textile industry, Aircraft and space vehicles in general, Materials for the reinforcement of composites, Rubber, Photography, Special measuring equipment for use in telecommunications, Installations in buildings, Construction materials, Linear and angular measurements, Acoustics and acoustic measurements, Fibre optic communications, Paints and varnishes, Machine tool systems, Microbiology, Energy and heat transfer engineering in general, Document imaging applications, Particle size analysis. Sieving, Aerosol containers, Powder metallurgy, Astronomy. Geodesy. Geography, Cans. Tins. Tubes.
Korean Agency for Technology and Standards (KATS), How to measure the aperture
Indonesia Standards, How to measure the aperture
IPC - Association Connecting Electronics Industries, How to measure the aperture
工业和信息化部, How to measure the aperture
CZ-CSN, How to measure the aperture
Professional Standard - Machinery, How to measure the aperture
- JB/T 8248.2-1999 Method for measurement for effective aperture and relative aperture of camera lenses
American National Standards Institute (ANSI), How to measure the aperture
American Society of Mechanical Engineers (ASME), How to measure the aperture
KR-KS, How to measure the aperture
- KS B 5409-2023 Methods for the measurement of the effective aperture, F-number and relative aperture of photographic lenses
Heilongjiang Provincial Standard of the People's Republic of China, How to measure the aperture
- DB23/T 1524-2013 Technical regulations for small aperture measuring instruments with large depth-to-diameter ratio
Japanese Industrial Standards Committee (JISC), How to measure the aperture
- JIS B 7095:1997 Photographic lenses -- Methods for the measurement of the effective aperture, F-number and relative aperture
German Institute for Standardization, How to measure the aperture
- DIN 2248-1:2000-01 Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
- DIN 2249-1:2000-01 Verification of geometrical parameters - "NOT GO" gauging members - Part 1: For holes from 1 mm up to 40 mm nominal diameter
- DIN 2248-3:2008 Geometrical product specifications (GPS) - "GO" gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter
- DIN 2249-2:2008 Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 2: Rod gauge for holes over 40 mm up to 500 mm nominal diameter
- DIN 2247-2:2008 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 2: With rod gauge for holes over 40 mm up to 500 mm nominal diameter
- DIN 2248-1:2000 Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
- DIN 2246-2:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 2: For holes over 120 mm up to 200 mm nominal diameter
- DIN 2246-1:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
- DIN 2245-1:2008 Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
- DIN 2245-2:2008 Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter
- DIN 2248-2:2008 Geometrical product specifications (GPS) - "GO" gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter
- DIN 2246-3:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 3: For holes over 40 mm up to 120 mm nominal diameter
- DIN 2249-4:2008-07 Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 4: Cylindrical gauging members for holes over 40 mm up to 120 mm nominal diameter
- DIN 2247-1:2008 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
- DIN 2248-3:2008-07 Geometrical product specifications (GPS) - "GO" gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter
- DIN 2248-2:2008-07 Geometrical product specifications (GPS) - "GO" gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter
- DIN 2249-1:2000 Verification of geometrical parameters - "NOT GO" gauging members - Part 1: For holes from 1 mm up to 40 mm nominal diameter
- DIN 2249-3:2008-07 Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 3: Segmental cylindrical gauging members for holes over 120 mm up to 200 mm nominal diameter
- DIN 2249-4:2008 Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 4: Cylindrical gauging members for holes over 40 mm up to 120 mm nominal diameter
- DIN 2248-4:2008 Geometrical product specifications (GPS) - "GO" gauging members - Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics
- DIN 2249-2:2008-07 Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 2: Rod gauge for holes over 40 mm up to 500 mm nominal diameter
- DIN 2247-3:2008 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 3: With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter
- DIN 2249-3:2008 Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 3: Segmental cylindrical gauging members for holes over 120 mm up to 200 mm nominal diameter
- DIN 2246-4:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics
- DIN EN 933-2:2020 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
- DIN EN 933-2:2020-09 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures; German version EN 933-2:2020
- DIN 2249-5:2008 Gemetrical product specifications (GPS) - "NOT GO" gauging members - Part 5: Cylindrical gauging members for holes over 40 mm up to 250 mm nominal diameter for precision mechanics
- DIN 58141-3:2012 Measurement of fiber optic elements - Part 3: Determination of acceptance angle of light guides; Text in German and English
- DIN 2247-5:2008 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 5: With cylindrical gauging member for holes over 40 mm up to 250 mm nominal diameter for precision mechanics
- DIN 2247-3:2008-07 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 3: With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter
- DIN 6112:2002 Packaging - Light gauge metal containers - Aperture for plug-in REL plastic closures
- DIN EN 14850:2006-02 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height; German version EN 14850:2005
API - American Petroleum Institute, How to measure the aperture
National Metrological Technical Specifications of the People's Republic of China, How to measure the aperture
- JJF 1806-2020 Calibration Specification for Measuring Equipment of Diameter of Micro and Small Hole
National Metrological Verification Regulations of the People's Republic of China, How to measure the aperture
- JJG 467-1986 Verification Regulation of Precision Bore Diameter Measuring Instrument
ACI - American Concrete Institute, How to measure the aperture
- ACI 364.17T-2018 How to Measure pH of a Concrete Surface prior to Installation of a Floor Covering
SE-SIS, How to measure the aperture
Professional Standard - Electron, How to measure the aperture
- SJ 2667-1986 Methods of measurement of numerical aperture of optical fibres and cables
(U.S.) Telecommunications Industries Association , How to measure the aperture
- TIA/EIA-455-134-1997 FOTP-134 Measurement of Connector Ferrule Hole Inside Diameter
- TIA-455-135-1997 FOTP-135 Mesurement of Connector Ferrule Inside and Outside Diameter Circular Runout
- TIA-455-134-1997 FOTP-134 Measurement of Connector Ferrule Hole Inside Diameter
British Standards Institution (BSI), How to measure the aperture
- BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
- BS EN 60793-1-43:2015 Tracked Changes. Optical fibres. Measurement methods and test procedures. Numerical aperture measurement
- BS EN 60793-1-43:2002 Optical fibres - Measurement methods and test procedures - Numerical aperture
- BS 3321:1986 Method for measurement of the equivalent pore size of fabrics (bubble pressure test)
- 19/30377681 DC BS EN 933-2. Tests for geometrical properties of aggregates. Part 2. Determination of particle size distribution. Test sieves, nominal size of apertures
- BS EN 14850:2006 Aerosol containers. Metal containers with 25,4 mm aperture. Measurement of contact height
- BS EN 14850:2005 Aerosol containers — Metal containers with 25,4 mm aperture — Measurement of contact height
RU-GOST R, How to measure the aperture
International Electrotechnical Commission (IEC), How to measure the aperture
- IEC 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods - Numerical aperture measurement
- IEC 60793-1-43:2001 Optical fibres - Part 1-43: Measurement methods and test procedures; Numerical aperture
TIA - Telecommunications Industry Association, How to measure the aperture
AENOR, How to measure the aperture
- UNE-EN 933-2:1996 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
- UNE-EN 933-2/1M:1999 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
ES-UNE, How to measure the aperture
- UNE-EN 933-2:2022 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
- UNE-EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
RO-ASRO, How to measure the aperture
- STAS 8972/4-1982 Hydrometry WATER HOW MEASUREMENT IN THE FREE LEVEL FLOW SYSTEMS Method of stage discharge relation (rating curve)
- STAS 3633-1971 Non-adjustable plain hole gauges. PLUG-GAUGE, WITH THE DIAME- TER FROM 100 to 200 mm Dimensions
European Committee for Electrotechnical Standardization(CENELEC), How to measure the aperture
- EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
Association Francaise de Normalisation, How to measure the aperture
- NF C93-840-1-43*NF EN 60793-1-43:2015 Optical fibres - Part 1-43 : measurement methods and test procedures - Numerical aperture measurement
- NF EN 60793-1-43:2015 Fibres optiques - Partie 1-43 : méthodes de mesure et procédures d'essai - Mesure de l'ouverture numérique
- NF EN 61341:2012 Méthode de mesure de l'intensité dans l'axe du faisceau et de l'angle (ou des angles) d'ouverture des lampes à réflecteur
- NF H44-046*NF EN 14850:2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
- NF EN ISO 3611:2023 Spécification géométrique des produits (GPS) - Équipement de mesurage dimensionnel - Caractéristiques de conception et caractéristiques métrologiques des micromètres d'extérieur
- NF C93-840-1-43:2002 Optical fibres - Part 1-43 : measurement methods and test procedures - Numerical aperture.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure the aperture
- GB/T 32361-2015 Test methods for pore size properties of membrane filters.Bubble point and mean flow pore test
- GB/T 7235-2004 Geometrical Product Specifications(GPS)Methods for the assessment of departure from roundness Measurement of variations in radius
- GB/T 38516-2020 Permeable sintered metal materials—Determination of average pore size of medium flow
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), How to measure the aperture
未注明发布机构, How to measure the aperture
- BS 3321:1986(1999) Method for Measurement of the equivalent pore size of fabrics (bubble pressure test)
PL-PKN, How to measure the aperture
- PN-EN 933-2-2021-01 E Tests for geometrical properties of aggregates -- Part 2: Determination of particle size distribution -- Test sieves, nominal size of apertures
Danish Standards Foundation, How to measure the aperture
- DS/EN 60793-1-43:2002 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture
- DS/EN 933-2:1999 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
CENELEC - European Committee for Electrotechnical Standardization, How to measure the aperture
- EN 60793-1-43:2002 Optical Fibres Part 1-43: Measurement Methods and Test Procedures - Numerical Aperture
Military Standard of the People's Republic of China-General Armament Department, How to measure the aperture
- GJB 8958-2017 General specifications for airborne synthetic aperture radar interferometry systems
CEN - European Committee for Standardization, How to measure the aperture
- PREN 933-2-2019 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves@ nominal size of apertures
Lithuanian Standards Office , How to measure the aperture
- LST EN 933-2-2001 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
Professional Standard - Aviation, How to measure the aperture
- HB 6796-1993 5000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D≥8~14)
- HB 6797-1993 5000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D>14~30)
- HB 6802-1993 10000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D≥8~14)
- HB 6803-1993 10000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D>14~30)
ZA-SANS, How to measure the aperture
- SANS 60793-1-43:2001 Optical fibres Part 1-43: Measurement methods and test procedures - Numerical aperture
American Society for Testing and Materials (ASTM), How to measure the aperture
- ASTM D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
- ASTM D7864/D7864M-15(2023) Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
- ASTM F316-03(2019) Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
International Organization for Standardization (ISO), How to measure the aperture
- ISO/CD 5059-1 Geometrical product specifications (GPS) — Dimensional measuring equipment: inside micrometers — Part 1: Two-point inside micrometers — Design and metrological characteristics
European Committee for Standardization (CEN), How to measure the aperture
- EN 14850:2005 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
Professional Standard - Petroleum, How to measure the aperture
- SY/T 6154-1995 Static Nitrogen Adsorption Capacity Method for Determination of Rock Specific Surface and Pore Size Distribution
国家能源局, How to measure the aperture
- SY/T 6154-2019 Static adsorption capacity method for determination of rock specific surface area and pore size distribution
YU-JUS, How to measure the aperture
- JUS K.T3.131-1983 NOTGO gauging memberes for holes over 40 to 120 mm nominal diameter cylindrical plug gauges
Professional Standard - Surveying and Mapping, How to measure the aperture
- CH/T 3009-2012 Specifications for space photogrammetric operation of 1 : 50 000 topographic maps by spaceborne synthetic aperture radar
- CH/T 3011-2012 Specifications for aerophotogrammetric operation of 1 : 50 000 topographic maps by airborne synthetic aperture radar
GB-REG, How to measure the aperture