ZH
RU
ES
nanotube
nanotube, Total:148 items.
In the international standard classification, nanotube involves: Materials for the reinforcement of composites, Test conditions and procedures in general, Physics. Chemistry, Rubber, Paints and varnishes, Textile fibres, Electricity. Magnetism. Electrical and magnetic measurements, Analytical chemistry, Lighting, Environmental protection, Optics and optical measurements, Electronic components in general, Inorganic chemicals, Metrology and measurement in general, Rubber and plastics products.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, nanotube
- GB/T 24491-2009 Multi-walled carbon nanotubes
- GB/T 33243-2016 Nanotechnologies.Characterization of multiwall carbon nanotube(MWCNT)
- GB/T 26826-2011(英文版) Measurement for diameter of carbon nanotubes
- GB/T 26826-2011 Measurement for diameter of carbon nanotubes
- GB/T 32868-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using thermogravimetric analysis
- GB/T 24490-2009 Test method for purity of multi-walled carbon nanotubes
- GB/T 32871-2016 Characterization of single-walled carbon nanotubes by Raman spectroscopy
- GB/T 30543-2014 Nanotechnologies.Characterization of single-wall carbon nanotubes using transmission electron microscopy
- GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
- GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- GB/T 29856-2013 Characterization of semiconducting single-walled carbon nanotubes using near infrared photoluminescence spectroscopy
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, nanotube
- GB/T 33818-2017 Carbon nanotube conductive paste
- GB/T 34916-2017 Nanotechnologies—Multi-walled carbon nanotubes—Determination of amorphous carbon content by thermogravimetric analysis
- GB/T 36065-2018 Nanotechnologies—Analysis of amorphous carbon, ash and volatile of carbon nanotubes—Thermogravimetry
- GB/T 35418-2017 Nanotechnologies—Determination of elemental impurities in samples of carbon nanotubes—Inductively coupled plasma mass spectrometry
国家市场监督管理总局、中国国家标准化管理委员会, nanotube
- GB/T 37152-2018 Nanotechnology—Carbon nanotube materials—Sheet resistance
- GB/T 39978-2021 Nanotechnology—Resistivity of carbon nanotube powder—Four probe method
- GB/T 40568-2021 Nanotechnologies—Characterization of multiwall carbon nanotubes—Mesoscopic shape factors
- GB/T 37225-2018 Nanotechnology—Characterization of multiwall carbon nanotube in aqueous solution—Extinction spectroscopy
- GB/T 39114-2020 Nanotechnologies—Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
RU-GOST R, nanotube
- PNST 63-2015 Materials from multiwall carbon nanotubes. Specifications
- GOST R IEC 62624-2013 Carbon nanotubes. Methods of determining the electrical characteristics
- GOST R 56551-2015 Nanomanufacturing. Material specifications. Part 2-1. Materials from single-wall carbon nanotubes. Specifications forms
- GOST R 56189-2014 Nanomanufacturing. Key control characteristics. Part 2-1. Carbon nanotubes materials. Methods of determining the sheet resistance
Group Standards of the People's Republic of China, nanotube
Professional Standard - Building Materials, nanotube
Japanese Industrial Standards Committee (JISC), nanotube
British Standards Institution (BSI), nanotube
- PD IEC TS 62607-2-4:2020 Nanomanufacturing. Key control characteristics. Carbon nanotube materials. Test methods for determination of resistance of individual carbon nanotubes
- PD ISO/TR 10929:2012 Nanotechnologies. Characterization of multiwall carbon nanotube (MWCNT) samples
- BS DD ISO/TS 11888:2011 Nanotechnologies. Characterization of multiwall carbon nanotubes. Mesoscopic shape factors
- PD ISO/TR 23463:2022 Nanotechnologies. Characterization of carbon nanotube and carbon nanofiber aerosols in relation to inhalation toxicity tests
- BS DD ISO/TS 11308:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using thermogravimetric analysis
- PD ISO/TS 19808:2020 Nanotechnologies. Carbon nanotube suspensions. Specification of characteristics and measurement methods
- PD ISO/TS 11308:2020 Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
- BS PD ISO/TS 11308:2020 Tracked Changes. Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis
- PD IEC/TS 62607-2-1:2012 Nanomanufacturing. Key control characteristics. Carbon nanotube materials. Film resistance
- PD ISO/TS 23690:2023 Nanotechnologies. Multiwall carbon nanotubes. Determination of carbon impurity content by thermogravimetric analysis
- PD ISO/TS 11888:2017 Tracked Changes. Nanotechnologies. Characterization of multiwall carbon nanotubes. Mesoscopic shape factors
- PD ISO/TS 10797:2012 Nanotechnologies. Characterization of single-wall carbon nanotubes using transmission electron microscopy
- BS DD ISO/TS 10867:2010 Nanotechnologies. Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- PD ISO/TS 10867:2019 Nanotechnologies. Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- PD ISO/TS 13278:2017 Nanotechnologies. Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- BS PD ISO/TS 13278:2017 Nanotechnologies. Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- BS DD ISO/TS 13278:2011 Nanotechnologies. Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- PD ISO/TS 10868:2017 Tracked Changes. Nanotechnologies. Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
- DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- PD ISO/TS 11251:2019 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
- BS DD ISO/TS 10868:2011 Nanotechnologies. Characterization of singlewall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
Korean Agency for Technology and Standards (KATS), nanotube
- KS C IEC 62624:2017 Test methods for measurement of electrical properties of carbon nanotubes
- KS C IEC 62624-2017(2022) Test methods for measurement of electrical properties of carbon nanotubes
- KS C 8015-2017 Carbon nanotube(CNT) panel for general lighting－Performance requirements
- KS C 8014-2011(2016) Carbon nanotube(CNT) panel for general lighting－Safety requirements
- KS C 8014-2011(2021) Carbon nanotube(CNT) panel for general lighting－Safety requirements
- KS C 8015-2017(2022) Carbon nanotube(CNT) panel for general lighting－Performance requirements
- KS C 8014-2011 Carbon nanotube(CNT) panel for general lighting－Safety requirements
- KS D 2711-2008 Evaluation of carbon nanotube soots and non-carbon content-Thermogravimetric analysis
- KS D 2712-2008 Evaluation of content of single-walled carbon nanotube using UV-VIS-NIR absorption spectroscopy
- KS C 8015-2011 Carbon nanotube(CNT) panel for general lighting－Performance requirements
- KS D 2711-2008(2018) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
- KS D 2717-2008 Evaluation of metallic/semiconducting ratio of single-walled carbon nanotube soots using UV-VIS－NIR absorption spectroscopy
- KS D 2712-2008(2018) Evaluation of content of single-walled carbon nanotube using UV-VIS-NIR absorption spectroscopy
- KS D 2717-2008(2018) Evaluation of metallic/semiconducting ratio of single-walled carbon nanotube soots using UV-VIS－NIR absorption spectroscopy
KR-KS, nanotube
- KS C IEC 62624-2017 Test methods for measurement of electrical properties of carbon nanotubes
- KS C ISO TS 11888-2023 Nanotechnologies — Characterization of multiwall carbon nanotubes — Mesoscopic shape factors
- KS D 2711-2008(2023) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
- KS D 2712-2008(2023) Evaluation of content of single-walled carbon nanotube using UV-VIS-NIR absorption spectroscopy
- KS D 2717-2008(2023) Evaluation of metallic/semiconducting ratio of single-walled carbon nanotube soots using UV-VIS－NIR absorption spectroscopy
International Organization for Standardization (ISO), nanotube
- ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
- ISO/TS 19808:2020 Nanotechnologies — Carbon nanotube suspensions — Specification of characteristics and measurement methods
- ISO/TS 11308:2020 Nanotechnologies — Characterization of carbon nanotube samples using thermogravimetric analysis
- ISO/TS 23690:2023 Nanotechnologies — Multiwall carbon nanotubes — Determination of carbon impurity content by thermogravimetric analysis
- ISO/TR 23463:2022 Nanotechnologies — Characterization of carbon nanotube and carbon nanofibre aerosols to be used in inhalation toxicity tests
- ISO/TS 11308:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
- ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- IEC TS 62607-2-1:2012 Nanomanufacturing - key control characteristics for CNT film applications - Resistivity — Part 2-1:
- IEC/TS 62607-2-1:2012 Nanomanufacturing - key control characteristics for CNT film applications - Resistivity — Part 2-1:
- ISO/TS 11888:2011 Nanotechnologies - Characterization of multiwall carbon nanotubes - Mesoscopic shape factors
- ISO/TS 11888:2017 Nanotechnologies - Characterization of multiwall carbon nanotubes - Mesoscopic shape factors
- IEC TS 62607-2-1:2012 Nanomanufacturing - key control characteristics for CNT film applications - Resistivity — Part 2-1:
- ISO/TS 10797:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
- ISO/TS 10867:2019 Nanotechnologies — Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- ISO/TS 13278:2017 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- ISO/TS 11251:2019 Nanotechnologies — Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
Danish Standards Foundation, nanotube
- DS/ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
- DS/ISO/TS 11888:2012 Nanotechnologies - Characterization of multiwall carbon nanotubes - Mesoscopic shape factors
- DS/ISO/TS 11308:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
- DS/ISO/TS 10797:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
- DS/ISO/TS 10867:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- DS/ISO/TS 10868:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
- DS/ISO/TS 13278:2012 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
- DS/ISO/TS 11251:2011 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
Association Francaise de Normalisation, nanotube
- XP T16-208*XP ISO/TR 10929:2012 Nanotechnologies - Characterization of multiwall carbon nanotube (MWCNT) samples
- XP ISO/TR 10929:2012 Nanotechnologies - Caractérisation des échantillons de nanotubes de carbone multifeuillets (NWCNTs)
- XP ISO/TS 11888:2017 Nanotechnologies - Caractérisation des nanotubes en carbone multicouches - Facteurs de forme mésoscopique
- XP T16-224*XP ISO/TS 19808:2020 Nanotechnologies - Carbon nanotube suspensions - Specification of characteristics and measurement methods
- XP ISO/TS 19808:2020 Nanotechnologies - Suspensions de nanotubes de carbone - Spécification des caractéristiques et méthodes de mesure
- FD T16-209:2012 Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
- XP T16-200*XP ISO/TS 10867:2020 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
- XP ISO/TS 10867:2020 Nanotechnologies - Caractérisation de nanotubes de carbone monofeuillet en utilisant la spectroscopie de photoluminescence dans le proche infra-rouge
- XP ISO/TS 13278:2018 Nanotechnologies - Dosage des impuretés dans les échantillons nanotubes de carbone (CNT) par spectroscopie de masse à plasma induit (ICP-MS)
- XP T16-207*XP ISO/TS 13278:2018 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
International Electrotechnical Commission (IEC), nanotube
- IEC TS 62607-2-4:2020 Nanomanufacturing - Key control characteristics - Part 2-4: Carbon nanotube materials - Test methods for determination of resistance of individual carbon nanotubes
- IEC 62624:2009 Test methods for measurement of electrical properties of carbon nanotubes
- IEC TS 62607-2-5:2022 Nanomanufacturing - Key control characteristics - Part 2-5: Carbon nanotube materials - Mass density of vertically-aligned carbon nanotubes: X-ray absorption method
- IEC PAS 62565-2-1:2011 Nanomanufacturing - Material specifications - Part 2-1: Single-wall carbon nanotubes - Blank detail specification
- ISO/TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- ISO/TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
- ISO TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
GOSTR, nanotube
- PNST 307-2018 Nanotechnologies. Single-wall carbon nanotubes. Characterization using thermogravimetric analysis
- GOST R 58356-2019 Nanomaterials. Single-wall carbon nanotubes. Technical requirements and test methods
- GOST 34684-2020 Nanomaterials. Single-wall carbon nanotubes. Technical requirements and test methods
- PNST 499-2020 Nanotechnologies. Сarbon nanotubes. Determination of chemical element impurities by inductively coupled plasma mass spectrometry method
- PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry
- GOST IEC/TS 62607-2-1-2017 Nanomanufacturing. Key control characteristics. Part 2-1. Carbon nanotubes materials. Methods of determining the sheet resistance
- PNST 507-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by using transmission electron microscopy and energy dispersive X-ray spectrometry
PH-BPS, nanotube
- PNS IEC 62624:2021 Test methods for measurement of electrical properties of carbon nanotubes
- PNS ISO/TS 19808:2021 Nanotechnologies - Carbon nanotube suspensions - Specification of characteristics and measurement methods
- PNS ISO/TS 11308:2021 Nanotechnologies - Characterization of carbon nanotube samples using thermogravimetric analysis
Professional Standard - Textile, nanotube
- FZ/T 54056-2012 Ultra-high molecular weight polyethylene (UHMWPE) /nano-carbon tube filament yarns
Institute of Electrical and Electronics Engineers (IEEE), nanotube
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., nanotube
- IEEE 1650-2005 Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes
American Society for Testing and Materials (ASTM), nanotube
- ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient
American National Standards Institute （ANSI), nanotube
- ANSI/IEEE 1650:2005 Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes
German Institute for Standardization, nanotube
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., nanotube
- ASHRAE AB-10-021-2010 System Analysis of MPCM Slurry Enhanced with Carbon Nanotubes as Heat Transfer Fluid
IEC - International Electrotechnical Commission, nanotube
- TS 62607-2-1-2012 Nanomanufacturing – Key control characteristics – Part 2-1: Carbon nanotube materials – Film resistance (Edition 1.0)
- PAS 62565-2-1-2011 Nanomanufacturing – Material specifications – Part 2-1: Single-wall carbon nanotubes – Blank detail specification (Edition 1.0)
Hebei Provincial Standard of the People's Republic of China, nanotube
- DB13/T 5025.1-2019 Determination method of graphene-carbon nanotube composite conductive paste Part 1: Determination of solid content
- DB13/T 5025.2-2019 Determination method of graphene-carbon nanotube composite conductive paste Part 2: Determination of moisture content
- DB13/T 5025.3-2019 Determination method of graphene-carbon nanotube composite conductive paste Part 3: Determination of magnetic foreign matter content
Guangdong Provincial Standard of the People's Republic of China, nanotube
- DB44/T 1215-2013 Characterization of Single-Walled Carbon Nanotubes Using Scanning Electron Microscopy and Energy Spectroscopy
US-CFR-file, nanotube
- CFR 40-721.10671-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10671:Multi-walled carbon nanotubes (generic).
- CFR 40-721.10703-2014 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10703:Multi-walled carbon nanotubes (generic).
- CFR 40-721.10663-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10663:Functionalized multiwalled carbon nanotubes (generic).
- CFR 40-721.10274-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10274:Multi-walled carbon nanotubes (generic) (P–09–188).
- CFR 40-721.10275-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10275:Multi-walled carbon nanotubes (generic) (P–09–0417).
- CFR 40-721.10276-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10276:Multi-walled carbon nanotubes (generic) (P–10–39).