ZH
RU
ES

Infrared stability

Infrared stability, Total:500 items.

In the international standard classification, Infrared stability involves: Products of the textile industry, Protection against fire, Laboratory medicine, Analytical chemistry, Footwear, Paints and varnishes, Construction industry, Products of the chemical industry, Plastics, Protection of and in buildings, Industrial trucks, Farming and forestry, Edible oils and fats. Oilseeds, Ferrous metals, Pharmaceutics, General methods of tests and analysis for food products, Testing of metals, Industrial furnaces, Protective equipment, Non-ferrous metals, Sacks. Bags, Domestic, commercial and industrial heating appliances, Lifting equipment, Crude petroleum, Medical equipment, Raw materials for rubber and plastics, Optical equipment, Paper and board, Animal feeding stuffs, Optoelectronics. Laser equipment, Road engineering, Petroleum products in general, Paint ingredients, Furniture, Ferroalloys, Lubricants, industrial oils and related products, Coals, Earthworks. Excavations. Foundation construction. Underground works, Components and accessories for telecommunications equipment, Aids for disabled or handicapped persons, Materials for the reinforcement of composites, Adhesives, Rubber, Vocabularies, Fuels, Air quality, Optics and optical measurements, Metrology and measurement in general, Rubber and plastics products, Materials for aerospace construction, Acoustics and acoustic measurements, Commercial vehicles, Construction materials, Waxes, bituminous materials and other petroleum products, Dentistry, Non-textile floor coverings, Metalliferous minerals, Power stations in general, Iron and steel products, Non-destructive testing, Tobacco, tobacco products and related equipment, Elements of buildings, Agricultural machines, implements and equipment, Environmental protection, Cellular materials, Hospital equipment, Refractories, Photography, Radiocommunications, Pipeline components and pipelines, Geology. Meteorology. Hydrology, Water quality, Open systems interconnection (OSI), Wastes, Non-metalliferous minerals, Motor cycles and mopeds.

U.S. Military Regulations and Norms, Infrared stability

• ARMY MIL-P-670 A VALID NOTICE 1-1988 PHOSPHORUS, RED, STABILIZED
• ARMY MIL-P-670 A-1966 PHOSPHORUS, RED, STABILIZED

工业和信息化部, Infrared stability

• YB/T 6059-2022 Method for determination of suspension stability of high-temperature infrared radiation coating suspensions
• YB/T 4738-2019 Determination of oxygen content of calcium silicon alloy by inert gas fusion infrared absorption method
• YB/T 4566.7-2016 Determination of vanadium iron sulfur content by infrared absorption method
• YB/T 4566.8-2016 Determination of carbon content of vanadium iron nitride by infrared absorption method
• YB/T 4566.9-2016 Determination of vanadium nitride iron oxygen content by infrared absorption method
• YB/T 4582.10-2017 Determination of carbon content in silicon ferronitride by infrared absorption method
• YS/T 1166-2016 Determination method of infrared transmittance of high-purity germanium tetrachloride
• YB/T 4726.6-2021 Determination of sulfur content in iron-containing dust and mud by infrared absorption method
• YB/T 4726.8-2021 Determination of carbon content in iron dust mud by infrared absorption method
• YB/T 4582.4-2017 Determination of sulfur content in silicon iron nitride by infrared absorption method
• YB/T 4908.4-2021 Determination of hydrogen content in vanadium-aluminum alloys by inert gas fusion infrared absorption method or thermal conductivity method

Professional Standard - Aerospace, Infrared stability

• QJ 2452-1993 General specification for infrared seeker gyro stabilization system
• QJ 1606-1989 材料测试

Korean Agency for Technology and Standards (KATS), Infrared stability

• KS K 0608-2011 Test method for the shape retention of garments
• KS M ISO 20873:2020 Footwear — Test methods for outsoles — Dimensional stability
• KS R 6015-2001(2007) FORK LIFT TRUCKS-STABILITY AND STABILITY TESTS
• KS D ISO 17053-2006(2016) Steel and iron－Determination of oxygen－Infrared method after fusion under inert gas
• KS M ISO 20873:2012 Footwear－Test methods for outsoles－Dimensional stability
• KS D ISO 17053:2006 Steel and iron－Determination of oxygen－Infrared method after fusion under inert gas
• KS D ISO 17053:2021 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
• KS P ISO 23640:2019 In vitro diagnostic medical devices — Evaluation of stability of in vitro diagnostic reagents
• KS C IEC 60240-1:2005 Characteristics of electric infra-red emitters for industrial heating－Part 1：Short wave infra-red emitters
• KS D ISO 22963-2010(2020) Titanium and titanium alloys－Determination of oxygen－Infrared method after fusion under inert gas
• KS R 1091-1989(1999) REACH FORK LIFT TRUCKS AND STRADDLE FORK LIFT TRUCKS-STABILITY ANDSTABILITY TESTS
• KS G ISO 7174-2-2004(2019) Urniture－Chairs－Determination of stability
• KS G ISO 7172-2002(2022) Furniture－Tables－Determination of stability
• KS G ISO 7172-2002(2017) Furniture－Tables－Determination of stability
• KS M ISO 10363-2009(2019) Hot-melt adhesives－Determination of thermal stability
• KS D ISO 22963:2010 Titanium and titanium alloys－Determination of oxygen－Infrared method after fusion under inert gas
• KS M ISO 1063-2006(2016) Surface active agents-Determination of stability in hard water
• KS M ISO 1063-2006(2021) Surface active agents-Determination of stability in hard water
• KS F 2829-2005(2020) Thermal performance of buildings－Quantitative detection of thermal irregularities in building envelopes－Infrared method
• KS B ISO 4304:2021 Cranes other than mobile and floating cranes ―General requirements for stability
• KS B ISO 4304:2016 Cranes other than mobile and floating cranes－General requirements for stability
• KS B ISO 4305:2018 Mobile cranes — Determination of stability
• KS M 6688-1996(2001) IDENTIFICATION OF RUBBER ELASTOMERS BY INFRARED SPECTROPHOTOMETRY
• KS M 6688-1986 IDENTIFICATION OF RUBBER ELASTOMERS BY INFRARED SPECTROPHOTOMETRY
• KS E ISO 4689-3:2006 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
• KS E ISO 4689-3:2017 Iron ores－Determination of sulfur content－Part 3：Combustion/infrared method
• KS M ISO 1063:2006 Surface active agents-Determination of stability in hard water
• KS P ISO 7491:2013 Dental materials－Determination of color stability
• KS G ISO 7171-2002(2022) Furniture－Storage units－Determination of stability
• KS G ISO 7171-2002(2017) Furniture－Storage units－Determination of stability
• KS P ISO 7491:2019 Dental materials ― Determination of colour stability
• KS X 6916-2006 Conformity Assessment in Infrared DSRCStandard for ITS applications
• KS M ISO 12965-2007(2017) Butadiene rubber－Determination of microstructure by infra－red spectrometry

GM North America, Infrared stability

• GM GMP.PP.002-1994 Polypropylene - Heat Stabilized, UV Stabilized, Impact Modified
• GM GMP.TPU.028-2002 TPU - UV Stabilized, Heat Stabilized, Castable Powder
• GMP.ABS.010-1990 ABS - Medium Heat Resistant, UV Stabilized Revision A
• GM GMP.ABS.016-1991 ABS - High Impact, UV Stabilized
• GM GMP.PA6.002-1995 Nylon 6 - UV Stabilized, Heat Stabilized, Impact Modified (Revision B)
• GM GMP.PP+PMMA.001-2000 GMP.PP+PMMA-High Impact, Heat Stabilized, UV Stabilized Copolymer
• GM GMP.PA6.044-1998 Nylon 6 - UV Resistant, Heat Stabilized
• GM GMP.PVC.038-2003 PVC Liquid Castable, Flexible Skin, UV Stabilized
• GM GMP.PA6.026-1997 Nylon 6 - 30% Glass Fiber Reinforced, UV Stabilized, Impact Modified, Heat Stabilized, Reduced Moisture
• GM GMP.PA66.079-1999 Nylon 66 - UV Stabilized, High Impact Modified, Heat Stabilized
• GM GMP.E/P.096-2004 Polyolefin Alloy - MPa Flex Mod, UV Stabilized, High Flow
• GM GM9739P-1988 UV Stabilizer Content of Polyvinyl Chloride
• GM GMP.ABS+PC.010-1990 ABS + PC - High Impact, Heat Stabilized, Exterior Grade
• GM GMP.PA66.079-2012 NYLON 66 - UV STABILIZED, HIGH IMPACT MODIFIED, HEAT STABILIZED (Issue 3; Do Not Use on New Programs; Replaced by GMW16558)
• GM GM9138P-1988 Dimensional Stability of Sheepskin
• GMP.PP.002-2011 Polypropylene ?Heat Stabilized, UV Stabilized, Impact Modified Issue 7; Do Not Use on New Programs; Replaced by GMW16208
• GM GMP.ABS+PC.019-1999 ABS + PC - UV Stabilized, Impact Modified
• GM GMP.E/P.070-1996 Polyolefin Alloy - 20% Mineral Filled, UV Stable
• GM GMP.PC.008-1999 Polycarbonate - UV Stabilized, Injection Molding Grade
• GM GMP.PE.012-1997 Polyethylene - Low Density, UV Stabilized, Blow Molding Grade (Revision B)
• GM GM9230P-1988 Dimensional Stability of a Headlining Assembly
• GM GMP.E/P.075-1997 Polyolefin Alloy - 440 MPa Flexural Modulus, UV Stabilized
• GM GMP.PP.026-1994 Polypropylene - 25% Mineral Filled, UV Stabilized, Copolymer
• GM GMP.PP.096-1998 Polypropylene - High Heat, High Crystalline, UV Stabilized Copolymer

RU-GOST R, Infrared stability

• GOST R 57986-2017 Polymer composites. Infrared spectroscopy. Near infrared qualitative analysis
• GOST R ISO 23640-2015 In vitro medical devices. Evaluation of stability of in vitro diagnostic reagents
• GOST R 54896-2012 Vegetable oils. Determination of quality and safety indices by near infrared spectrometry method
• GOST 12.4.126-1983 Occupational safety standards system. Fabrics and materials for welders working. Method for determination of safety and UF-resistance
• GOST R 57941-2017 Polymer composites. Infrared spectroscopy. Qualitative analysis
• GOST 13917-1992 Optical materials. Methods for determination of chemical stability. Groups of chemical stability
• GOST 28793-1990 Furniture. Tables. Determination of stability
• GOST 28447.0-1990 Pneumotextured threads. Methods for the determination of structure and tensile strength instability
• GOST 33441-2015 Vegetable oils. Determination of quality and safety by near infrared spectrometry
• GOST R 8.657-2009 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
• GOST R 25645.338-1996 Polymeric materials for space technique. Requirements for ultraviolet radiation stability tests
• GOST 31871-2012 Motor and aviation gasolines. Determination of benzene by method of infrared spectroscopy
• GOST 29264-1991 Surface active agents. Determination of stability in hard water
• GOST 33403-2015 Testing of chemicals of environmental hazard. Screening test for thermal stability and stability in air
• GOST R 50604-1993 Wheelchairs. Method of determination for static stability
• GOST ISO 13765-3-2017 Refractory mortars. Determination of joint stability

British Standards Institution (BSI), Infrared stability

• BS EN 13640:2002 Stability testing of in vitro diagnostic reagents
• BS EN 12772:2000 Footwear - Test methods for outsoles - Dimensional stability
• BS 2782-1 Method 130A:1991 Methods of testing plastics. Thermal properties. Determination of the thermal stability of polyvinyl chloride by the Congo red method
• BS EN ISO 23640:2013 In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
• BS EN ISO 23640:2011 In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
• BS EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method
• BS ISO 22963:2008 Titanium and titanium alloys - Determination of oxygen - Infrared method after fusion under inert gas
• BS ISO 17053:2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
• 16/30332251 DC BS EN ISO 20873. Footwear. Test methods for outsoles. Dimensional stability
• BS 4875 Pt.2:1985 Strength and stability of furniture. Methods for determination of stability of chairs and stools
• BS 4875 Pt.4:1985 Strength and stability of furniture. Methods for determination of stability of settees
• BS EN ISO 23640:2015 Tracked Changes. In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
• BS EN ISO 14602:2010 Non-active surgical implants - Implants for osteosynthesis - Particular requirements
• BS EN ISO 14602:2011 Non-active surgical implants. Implants for osteosynthesis. Particular requirements
• BS IEC 61196-1-212:2021 Coaxial communication cables. Environmental test methods. UV stability
• BS ISO 7176-1:1999 Wheelchairs - Determination of static stability
• BS ISO 7176-1:2014 Wheelchairs. Determination of static stability
• BS 4875-8:1998 Furniture - Strength and stability of furniture - Methods for determination of stability of non-domestic storage furniture
• BS EN 17009:2019 Flooring of lignified materials other than wood. Characteristics, assessment and verification of constancy of performance and marking
• BS ISO 4689-3:2015 Iron ores. Determination of sulfur content. Combustion/infrared method
• BS ISO 4689-3:2004 Iron ores - Determination of sulfur content - Combustion/infrared method
• BS ISO 4689-3:2017 Iron ores. Determination of sulfur content. Combustion/infrared method
• BS EN ISO 16231-2:2015 Self-propelled agricultural machinery. Assessment of stability. Determination of static stability and test procedure
• BS EN ISO 7491:2000 Dental materials - Determination of colour stability
• BS ISO 13765-3:2004 Refractory mortars - Determination of joint stability
• BS EN 60519-12:2013 Safety in electroheating installations. Particular requirements for infrared electroheating installations
• BS EN 934-6:2019 Tracked Changes. Admixtures for concrete, mortar and grout. Sampling, assessment and verification of the constancy of performance
• BS 4875-5:2001 Strength and stability of furniture - Requirements for strength, durability and stability of tables and trolleys for domestic and contract use

Association Francaise de Normalisation, Infrared stability

• NF S92-032:2002 Stability testing of in vitro diagnostic reagents.
• NF G62-306*NF EN 12772:2000 Footwear - Test methods for outsoles - Dimensional stability
• NF S92-032*NF EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents
• NF S92-032:2014 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents
• NF EN 12772:2000 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Stabilité dimensionnelle
• NF EN 60240-1:1995 Caractéristiques des émetteurs électriques d'infrarouge pour chauffage industriel - Partie 1 : émetteurs d'infrarouge court.
• NF EN ISO 23640:2015 Dispositifs médicaux de diagnostic in vitro - Évaluation de la stabilité des réactifs de diagnostic in vitro
• NF X10-023*NF EN 13187:1999 Thermal performance of buildings. Qualitative detection of thermal irregularities in building envelopes. Infrared method.
• NF EN 13187:1999 Performance thermique des bâtiments - Détection qualitative des irrégularités thermiques sur les enveloppes de bâtiments - Méthode infrarouge.
• NF D61-003*NF EN 1022:2018 Furniture - Seating - Determination of stability
• NF EN ISO 16231-2:2015 Machines agricoles automotrices - Évaluation de la stabilité - Partie 2 : détermination de la stabilité statique et modes opératoires d'essai
• NF B53-677*NF EN 17009:2019 Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking
• NF EN 12458:1999 Agents de surface - Détermination de la stabilité à l'eau dure.
• NF T77-156:1987 Basic silicones for industrial use. Determination of introduced peroxydes content. Infra-red spectrometric method.
• NF A09-420:1993 Non destructive testing. Infrared thermography. Characterization of equipment.
• NF E52-085:2000 Mobile cranes - Determination of stability.
• NF E52-085*NF ISO 4305:2014 Mobile cranes - Determination of stability
• NF S91-237*NF EN ISO 7491:2000 Dental materials - Determination of colour stability
• NF T76-120*NF EN ISO 10363:1995 Hot-melt adhesives. Determination of thermal stability.
• NF EN ISO 10363:1995 Adhésifs thermofusibles - Détermination de la stabilité thermique.
• NF EN ISO 7491:2000 Produits dentaires - Détermination de la stabilité de couleur
• NF EN 1022:2018 Mobilier domestique - Sièges - Détermination de la stabilité
• NF R84-101:1980 Plastiques souples - Stabilité de l'aspect après exposition à la chaleur.

European Committee for Standardization (CEN), Infrared stability

• CEN EN 13640-2002 Stability Testing of in Vitro Diagnostic Reagents
• EN ISO 23640:2013 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents
• EN ISO 23640:2011 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents [Superseded: CEN EN 13640]
• EN 13640:2002 Stability Testing of in Vitro Diagnostic Reagents
• EN 13187:1998 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified)
• EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011)
• EN ISO 14630:2012 Non-active surgical implants - General requirements
• prEN 26781-1992 Thermal insulation; qualitative detection of thermal irregularities in building envelopes; infrared method (ISO 6781:1983)
• prEN 238-1985 Liquid petroleum products; determination of the benzene content; infrared spectrometric method
• EN ISO 14602:2010 Non-active surgical implants - Implants for osteosynthesis - Particular requirements
• EN ISO 14602:2011 Non-active surgical implants - Implants for osteosynthesis - Particular requirements (ISO 14602:2010)
• EN 12458:1999 Surface active agents - Determination of stability in hard water

American Society for Testing and Materials (ASTM), Infrared stability

• ASTM E1790-00 Standard Practice for Near Infrared Qualitative Analysis
• ASTM E1790-04 Standard Practice for Near Infrared Qualitative Analysis
• ASTM E1790-04(2016)e1 Standard Practice for Near Infrared Qualitative Analysis
• ASTM D2357-11 Standard for Qualitative Classification of Surfactants by Infrared Absorption
• ASTM E1790-04(2010) Standard Practice for Near Infrared Qualitative Analysis
• ASTM D2357-74(1995)e1 Standard for Qualitative Classification of Surfactants by Infrared Absorption
• ASTM D2357-74(2003) Standard for Qualitative Classification of Surfactants by Infrared Absorption
• ASTM D2357-11(2016) Standard for Qualitative Classification of Surfactants by Infrared Absorption
• ASTM D2702-05(2016) Standard Practice for Rubber Chemicals&x2014;Determination of Infrared Absorption Characteristics
• ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
• ASTM D2702-05 Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
• ASTM D2702-94(1998) Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
• ASTM D2702-05(2021) Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
• ASTM E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis
• ASTM E1655-04 Standard Practices for Infrared Multivariate Quantitative Analysis
• ASTM E1655-05 Standard Practices for Infrared Multivariate Quantitative Analysis
• ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
• ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
• ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
• ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
• ASTM D4609-08 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization
• ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
• ASTM D2702-05(2011) Standard Practice for Rubber Chemicalsmdash;Determination of Infrared Absorption Characteristics
• ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
• ASTM F1926/F1926M-10 Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings
• ASTM C1153-10(2015) Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
• ASTM D2702-04 Standard Practice for Rubber Chemicals-Determination of Infrared Absorption Characteristics
• ASTM D8022-20 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
• ASTM UOP793-12 Color Stability of Petroleum Distillates
• ASTM E168-67(1977) Standard Recommended Practices for General Techniques Of Infrared Quantitative Analysis
• ASTM E168-16(2023) Standard Practices for General Techniques of Infrared Quantitative Analysis
• ASTM E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis
• ASTM D7342-07 Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
• ASTM E2114-05a Standard Terminology for Sustainability Relative to the Performance of Buildings
• ASTM E2114-05 Standard Terminology for Sustainability Relative to the Performance of Buildings

(U.S.) Ford Automotive Standards, Infrared stability

• FORD FLTM BO 114-03-2001 ULTRAVIOLET STABILITY OF AUTOMOTIVE SAFETY GLASS
• FORD FLTM BO 114-3-2001 ULTRAVIOLET STABILITY OF AUTOMOTIVE SAFETY GLASS
• FORD FLTM BI 153-01-2005 THERMAL STABILITY FOR LUBRICANTS
• FORD SJ-M4D9745-A-1994 POLYPROPYLENE, 20% GLASS SPHERE FILLED, UV- STABILIZED, EXTERIOR
• FORD WSS-M4D713-A9-2008 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

HU-MSZT, Infrared stability

• MSZ 1757/2-1983
• MSZ 2602-1981
• MSZ 2970/6-1987

KR-KS, Infrared stability

• KS M ISO 20873-2020 Footwear — Test methods for outsoles — Dimensional stability
• KS D ISO 17053-2021 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
• KS P ISO 23640-2019 In vitro diagnostic medical devices — Evaluation of stability of in vitro diagnostic reagents
• KS M 2171-2018(2023) Testing method for thermal and oxidation stability of heat treating oils
• KS B ISO 4304-2016 Cranes other than mobile and floating cranes－General requirements for stability
• KS B ISO 4304-2021 Cranes other than mobile and floating cranes ―General requirements for stability
• KS B ISO 4305-2018 Mobile cranes — Determination of stability
• KS P ISO 7491-2019 Dental materials ― Determination of colour stability
• KS B ISO 4305-2018(2023) Mobile cranes — Determination of stability

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared stability

• GB/T 33327-2016 Ultraviolet curable coatings—Assessment of the storage stability
• GB/T 1573-2018 Determination of thermal stability of coal

PL-PKN, Infrared stability

• PN C89291-14-1991 Poly(vinyl chloride) resins Determination of the thermal stability by the Congo red method
• PN C04592-1972 Water and waste water , Determination coefficient of stability and thermostability of water
• PN C04084-1988 Determination of hydrolytic stability of hydraulic fluids
• PN M73241-02-1992 Hydraulic fluid power Determination of characteristics of motors Startability
• PN P55503-1990 Bookbinding Determination of dimensiona! stability for ccwering materials
• PN C04652-1986 Pesticides Emulsifiable concentrates Determination of emulsion stability
• PN C89284-1986 Polyethylene Determination of thermooxidative stability

GM Global, Infrared stability

• GMW 16948-2013 Polyamide 6 - Heat Stabilized, Impact Modified, UV Stabilized Issue 1; English
• GMW 16558-2011 Polyamide 66 - Heat Stabilized, Impact Modified, UV Stabilized Issue 1; English

国家市场监督管理总局、中国国家标准化管理委员会, Infrared stability

• GB/T 37969-2019 Standard guidelines for near infrared qualitative analysis
• GB/T 3903.13-2020 Footwear—Test methods for outsoles—Dimensional stability
• GB/T 18497.1-2019 Characteristics of electric infrared emitters for industrial heating—Part 1: Shortwave electric infrared emitters
• GB/T 18497.2-2019 Characteristics of electric infrared emitters for industrial heating—Part 2: Mediumwave and longwave electric infrared emitters
• GB/T 4333.10-2019 Ferrosilicon—Determination of carbon content—Infrared absorption method
• GB/T 7731.10-2021 Ferrotungsten—Determination of carbon content—Infrared absorption method
• GB/T 24583.7-2019 Vanadium-nitrogen—Determination of oxygen content—Infrared absorption method
• GB/T 24583.6-2019 Vanadium-nitrogen—Determination of sulfur content—Infrared absorption method
• GB/T 24583.4-2019 Vanadium-nitrogen—Determination of carbon content—Infrared absorption method
• GB/T 19924-2021 Mobile cranes—Determination of stability

Professional Standard - Forestry, Infrared stability

• LY/T 2053-2012 Standard method for near infrared qualitative analysis of Wood
• LY/T2053-2012 Standard method for mear infrarde qualitative analysis of wood
• LY/T 1850-2009 Guidelines for Testing Specificity, Consistency and Stability of New Varieties of Plants Poinsettia

Danish Standards Foundation, Infrared stability

• DS/EN 12772:2000 Footwear - Test methods for outsoles - Dimensional stability
• DS/EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method
• DS/R 209:1980 Determination of oil and grease in water. Infrared spectrophotometric method
• DS/EN ISO 10363:1996 Hot-melt adhesives - Determination of thermal stability
• DS/EN 12458:1999 Surface active agents - Determination of stability in hard water
• DS/ISO 7171:1992 Furniture. Storage units. Determination of stability
• DS/EN ISO 7491:2001 Dental materials - Determination of colour stability
• DS/EN 1022:2007 Domestic furniture - Seating - Determination of stability

Lithuanian Standards Office , Infrared stability

• LST EN 12772-2002 Footwear - Test methods for outsoles - Dimensional stability
• LST EN 60240-1-2001 Characteristics of electric infra-red emitters for industrial heating. Part 1: Short wave infra-red emitters (IEC 60240-1:1992)
• LST EN 13187-2000 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983 modified)
• LST EN 12458-2002 Surface active agents - Determination of stability in hard water
• LST ISO 1063:1997 Surface active agents. Determination of stability in hard water
• LST EN 1022-2005 Domestic furniture - Seating - Determination of stability

AENOR, Infrared stability

• UNE-EN 12772:2000 FOOTWEAR - TEST METHODS FOR OUTSOLES - DIMENSIONAL STABILITY
• UNE-EN ISO 23640:2013 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011)
• UNE 38864:2011 Titanium and titanium alloys. Determination of oxygen. Infrared method after fusion under inert gas.
• UNE 55116:1975 FATS. DETERMINATION OF THE STABILITY. (METHOD OF ACTIVE OXYGEN).
• UNE 11015:1989 TEST METHODS FOR DETERMINATION OF STABILITY OF TABLES.
• UNE 48236:1995 PAINTS AND VARNISHES. DETERMINATION OF INFRARED SPECTRUM OF VEHICLE SOLIDS.
• UNE-EN 12458:1999 SURFACE ACTIVE AGENTS. DETERMINATION OF STABILITY IN HARD WATER
• UNE 58119:1994 MOBILE CRANES. DETERMINATION OF STABILITY.
• UNE-EN 1022:2005 Domestic furniture - Seating - Determination of stability
• UNE 11013:1989 TEST METHODS FOR DETERMINATION OF STABILITY OF SETTEES.
• UNE 31003:1994 STABILITY OF EXPLOSIVES. ABEL TEST (80oC).
• UNE-ISO 35:2012 Elastomers. Natural rubber latex. Determination of mechanical stability
• UNE 58121:1990 CRANES OTHER THAN MOBILE AND FLOATING CRANES. GENERAL REQUIREMENTS FOR STABILITY

Group Standards of the People's Republic of China, Infrared stability

• T/CECS 10149-2021 Determination of Concrete Admixture Quality Consistency Infrared Spectroscopy
• T/BPCT 001-2020 Identification of fresh ginger Infrared spectroscopic method
• T/CPCIF 0195-2022 Rapid determination of crude oil key properties— Near infrared spectrometry
• T/SATA 054-2023 Etermination of ethanol concentration in wine - Near infrared spectroscopy method
• T/CIQA 66-2023 Rapid determination of water content in ores-Far infrared drying method
• T/NTTIC 018-2019 Detection and evaluation of far-infrared properties of household bedding fabrics

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared stability

• GB/T 32199-2015 Infrared Spectroscopy Qualitative Analysis Technique General Rules
• GB/T 3903.13-2005 Footwear-Test. method for outsoles-Dimensional stability
• GB/T 18497.1-2001 Characteristics of electric infra-red emitters for industrial heating Part 1: Short wave infra-red emitters
• GB/T 15489.8-1995 Colour filter glass test methods Resistance UV irradiating stability
• GB/T 223.82-2018 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas
• GB/T 30127-2013 Textiles.Testing and evaluation for far infrared radiation properties
• GB/T 2392-2014 Dyes.Determination of thermo stability
• GB/T 2392-2006 Dyes.Determination of thermo stability
• GB/T 4701.8-2009 Ferrotitanium-Determination of carbon content-The infrared absorption method
• GB/T 3653.7-2020 Ferroboron—Determination of sulfur content—Infrared absorption method
• GB/T 5059.7-2014 Ferromolybdenum.The determination of carbon content.Infrared absorption method
• GB/T 18319-2001 Textiles-Testing method for thermal retention with accumulated by infrared ray
• GB/T 31959-2015 Determination of thermal oxidative resistance of carbon fiber
• GB/T 1573-2001 Determination of thermal stability of coal
• GB/T 1670-1988 Plasticizers--Test method of heat-resistance
• GB/T 2392-1980 Determination of heat stability for reactive dyes
• GB/T 24583.4-2009 Vanadium.Nitrogen alloy.Determination carbon of content.The infrared absorption method
• GB/T 24583.6-2009 Vanadium-Nitrogen alloy.Determination of sulfur content.The infrared absorption method
• GB/T 24583.7-2009 Vanadium-Nitrogen alloy.Determination of oxygen content.The infrared absorption method
• GB/T 1640-1979 Determination of the stability of solubilised reduced dyes
• GB/T 19924-2005 Mobile cranes.Determination of stability
• GB/T 29597-2013 Reactive dyes.Determination of stability to alkalis
• GB/T 9801-1988 Air quality--Determination of carbon monoxide--Non-disperisive infrared spectrometry

International Organization for Standardization (ISO), Infrared stability

• ISO 23640:2011 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents
• ISO 20873:2001 Footwear - Test methods for outsoles - Dimensional stability
• ISO 20873:2018 Footwear - Test methods for outsoles - Dimensional stability
• ISO 17053:2005 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
• ISO 6781:1983 Thermal insulation; Qualitative detection of thermal irregularities in building envelopes; Infrared method
• ISO 22963:2008 Titanium and titanium alloys - Determination of oxygen - Infrared method after fusion under inert gas
• ISO/DIS 24476 Steel – Determination of oxygen – Infrared absorption method after fusion under inert gas (Routine method)
• ISO/CD 24476 Steel and iron- determination of Oxygen-Infrared method after fusion under inert gas(Routine Method)
• ISO/TR 7469:1977 Dimensional stability of hardboards
• ISO 7491:2000 Dental materials - Determination of colour stability
• ISO 4304:1987 Cranes other than mobile and floating cranes; General requirements for stability
• ISO 35:1982 Rubber latex, natural — Determination of mechanical stability
• ISO 4305:1981 Mobile cranes — Determination of stability
• ISO 35:1972 Title missing - Legacy paper document
• ISO 4305:1991 Mobile cranes; determination of stability
• ISO 4305:2014 Mobile cranes - Determination of stability
• ISO/TS 4667:2022 Coal — Determination of the thermal stability and thermal fragmentation
• ISO 1063:1974 Surface active agents; Determination of stability in hard water
• ISO 8580:1987 Rubber and plastics hoses; Determination of ultra-violet resistance under static conditions

ES-AENOR, Infrared stability

• UNE 53-633-1991 Rubber. Identification infra-red spectrometric method
• UNE 31 010
• UNE 56-753-1988
• UNE 26-377-1987
• UNE 20-501 Pt.2-21-1985
• UNE 11-013-1989
• UNE 11-015-1989

WRC - Welding Research Council, Infrared stability

• BULLETIN 238-1978 PLASTIC STABILITY OF PIPES AND TEES EXPOSED TO EXTERNAL COUPLES

American Welding Society (AWS), Infrared stability

• WRC 238:1978 Plastic Stability of Pipes and Tees Exposed to External Couples

Professional Standard - Agriculture, Infrared stability

• NY/T 2753-2015 Guidelines for the conduct of tests for distinctness,uniformity and stability.Safflower (Carthamus tinctorius L.)
• NY/T 2480-2013 Guidelines for the conduct of tests for distinctness,uniformity and stability.Red clover (Trifolium pratense L.)
• NY/T 2511-2013 Guidelines for the conduct of tests for distinctness,uniformity and stability.Amaranthus tricolor (Amaranthus tricolor L.)
• NY/T 2513-2013 Guidelines for the conduct of tests for distinctness, uniformity and stabilty.Scarlet sage (Salvia splendens Ker-Gawler)

Zhejiang Provincial Standard of the People's Republic of China, Infrared stability

• DB33/T 989-2015 Determination of SBS Content in Modified Asphalt by Infrared Spectroscopy

German Institute for Standardization, Infrared stability

• DIN EN 12772:2000 Footwear - Test methods for outsoles - Dimensional stability; German version EN 12772:1999
• DIN EN 12772:2000-01 Footwear - Test methods for outsoles - Dimensional stability; German version EN 12772:1999 / Note: To be replaced by DIN EN ISO 20873 (2016-01).
• DIN 53383-2:1983 Testing of plastics; testing of oxidation stability by means of ageing in an oven; polyethylene of high density (PE-HD), infra red spectroscopic (IR) determination of the carbonyle content
• DIN EN ISO 23640:2015-12 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011); German version EN ISO 23640:2015 / Note: DIN EN ISO 23640 (2013-09) remains valid alongside this standard until 2018-06-30.
• DIN EN 13187:1999-05 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified); German version EN 13187:1998 / Note: To be replaced by DIN EN ISO 6781-1 (2021-05).
• DIN 51820:2013 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum
• DIN EN 17009:2019-06 Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking; German version EN 17009:2019
• DIN 4126:2013 Stability analysis of diaphragm walls
• DIN EN ISO 14602:2012 Non-active surgical implants - Implants for osteosynthesis - Particular requirements (ISO 14602:2010); German version EN ISO 14602:2011
• DIN EN 1022:2017 Furniture - Seating - Determination of stability; German and English version prEN 1022:2017
• DIN EN 1022:2019 Furniture - Seating - Determination of stability
• DIN EN 1022:2022 Furniture - Seating - Determination of stability; German and English version prEN 1022:2022
• DIN EN ISO 23640:2012 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011); German version EN ISO 23640:2011
• DIN EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011); German version EN ISO 23640:2015
• DIN EN ISO 23640:2013 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011); German version EN ISO 23640:2013
• DIN EN 17009:2019 Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking
• DIN EN 60240-1:1995-07 Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters (IEC 60240-1:1992); German version EN 60240-1:1994
• DIN EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified); German version EN 13187:1998
• DIN EN ISO 7491:2001 Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000
• DIN EN 12458:1999-04 Surface active agents - Determination of stability in hard water; German version EN 12458:1999
• DIN 55415:2022-09 Transport stability - Test methods to determine the transport stability of unit loads in intermodal transportation
• DIN 55415:2022 Transport stability - Test methods to determine the transport stability of unit loads in intermodal transportation
• DIN EN ISO 7491:2001-01 Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000
• DIN EN 12458:1999 Surface active agents - Determination of stability in hard water; German version EN 12458:1999
• DIN EN 934-6:2019 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance
• DIN EN 934-6:2017 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance; German and English version prEN 934-6:2017

农业农村部, Infrared stability

• NY/T 3508-2019 Guidelines for plant variety specificity, consistency and stability testing of Amaryllis spp.

国家林业局, Infrared stability

• LY/T 2740-2016 Guidelines for specificity, consistency and stability testing of new plant varieties of Taxus genus

American National Standards Institute （ANSI), Infrared stability

• ANSI/UL 2333-2003 Standard for Safety for Infrared Thermometers
• ANSI PH1.42-1969 Comparing the Color Stabilities of Photographs, Method for

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Infrared stability

• GJB 5384.20-2005 Test methods of performance for pyrotechnic composition Part 20: Determination of infrared screening time Infrared thermal imaging sets method
• GJB 5384.18-2005 Test methods of performance for pyrotechnic composition Part 18: Determination of IR extinction coefficient

Military Standard of the People's Republic of China-General Armament Department, Infrared stability

• GJB 8684.20-2015 Pyrotechnic performance test methods Part 20: Determination of infrared shielding time Infrared thermal imaging camera method
• GJB 8684.18-2015 Pyrotechnic powder performance test methods Part 18: Determination of infrared extinction coefficient

ES-UNE, Infrared stability

• UNE-EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011)
• UNE-EN 13187:1998 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983 modified)
• UNE-EN 17009:2019 Flooring of lignified materials other than wood - Characteristics, assessment and verification of constancy of performance and marking

国家药品监督管理局, Infrared stability

• YY/T 1579-2018 In vitro diagnostic medical devices and in vitro diagnostic reagent stability evaluation

TR-TSE, Infrared stability

• TS 2784-1977 Characteristics Of Elektnc Infra - Red Emitters For Heating Purposes

International Electrotechnical Commission (IEC), Infrared stability

• IEC 60240-1:1992 Characteristics of electric infra-red emitters for industrial heating; part 1: short wave infra-red emitters

Japanese Industrial Standards Committee (JISC), Infrared stability

• JIS D 6011:1993 Fork lift trucks -- Stability and stability tests
• JIS R 1803:2005 Method for the spectral radiant energy measurement of far infrared heaters specified in the far infrared region
• JIS G 1239:2014 Iron and steel -- Determination of oxygen -- Infrared absorption method after fusion under inert gas
• JIS K 2514-2:2013 Lubricating oils -- Determination of oxidation stability -- Part 2: Oxidation stability of turbine oils
• JIS K 2514-1:2013 Lubricating oils-Determination of oxidation stability.Part 1: Oxidation stability of internal combustion engine oils
• JIS K 2514:1996 Lubricating oils -- Determination of oxidation stability
• JIS K 5600-2-7:1999 Testing methods for paints -- Part 2: Characteristics and stability of paints Section 7: Storage stability

ET-QSAE, Infrared stability

• ES 409-2000

CZ-CSN, Infrared stability

• CSN 86 2002-1995 Stability of Drugs
• CSN 75 7505-1998 Water quality - Determination of non-polar extractable matters by IR spectrometric method
• CSN 73 6181-1972 Cement stabilization of soils
• CSN 65 6151-1970 Stability of alkylated gasolij)es
• CSN 65 9024-1983 Reactive dyestuffe. Method of storage stability determination.
• CSN 65 6331-1968 Determination of colloidal stability of lubricating greases
• CSN 64 5405-1974 Testing of cellular materials. Determination of dimensional stability of cellular plastics
• CSN 65 6155-1989 Jet fuels. Determination of thermal tability
• CSN 64 0610-1977 Plastics testing. Determination of the dimensional stability of plastic films
• CSN 67 6015-1965 Test of p?ilit stability to chemical leagens
• CSN 73 0565-1978 Thermo-technical properties of struetures. Stables

RO-ASRO, Infrared stability

• SR ISO 4304:1987 Cranes other than mobile and floating cranes - General requirements for stability
• STAS SR ISO 6781:1995 Thermal insulation - Qualitative detection of thermal irregularities in building envelopes - Infrared method
• STAS 6032-1980 PLASTICS Determination or theriual slability ofpolyvinyl cliloride and allied copolymers by the Congo red method
• STAS SR ISO 7171:1996 Furniture. Storange units Determination of stability
• STAS 8798/7-1972 REBBER LATEX Determination of mechanical stability
• STAS 7948/13-1978 INORGANIC PIGMENTS Determination of stability and reresistance to heat
• STAS 12527-1987 GLASS Stability determination at atmospheric agents
• STAS 11995-1983 OPTICAL GLASS Chemical stability determination
• SR ISO 4305:1994 Mobile cranes - Determination of stability
• STAS 2633-1976 CKMENTS Determinatkm of the stability to Ihc aggressiveness of sulphate waters

Taiwan Provincial Standard of the People's Republic of China, Infrared stability

• CNS 15042-2007 Standard specification for infrared thermometers for intermittent determination of patient temperature

Professional Standard - Electron, Infrared stability

• SJ/T 11871-2022 Performance requirements for infrared sensors for lighting

未注明发布机构, Infrared stability

• BS EN 60240-1:1994(1999) Characteristics of electric infra - red emitters for industrial heating — Part 1 : Short wave infra - red emitters
• PD 6691:2022 Assessment and verification of constancy of performance
• BS EN ISO 10363:1995(1999) Hot - melt adhesives — Determination of thermal stability

IT-UNI, Infrared stability

• UNI 7640-1976
• UNI 7420-1975

Professional Standard - Light Industry, Infrared stability

• QB/T 2812-2006 Paper-online determination of weight and moisture (The near infrared method)

Professional Standard - Commodity Inspection, Infrared stability

• SN/T 2902-2011 Screening experiments for thermal stability and air stability of dangerous goods
• SN/T 3601-2013 Determination of total sulfur in graphite.Infrared absorption spectrometry

VN-TCVN, Infrared stability

• TCVN 7875-2008 water.Determination of oil and grease.Partition-infrared method

Hunan Provincial Standard of the People's Republic of China, Infrared stability

• DB43/T 1065-2015 Determination of amino acid in feed by near infrared method
• DB43/T 2263-2021 Determination of organic carbon and sulfur by tube-type resistance furnace infrared method

Sichuan Provincial Standard of the People's Republic of China, Infrared stability

• DB5115/T 80-2022 Determination of rice fatty acid value by near infrared method
• DB51/T 1922-2014 Determination of Toluene Content in Gasoline by Infrared Spectroscopy
• DB51/T 1919-2014 Determination of N-Methylaniline in Gasoline by Infrared Spectrometry
• DB51/T 1925-2014 Determination of Dimethyl Carbonate in Gasoline by Infrared Spectroscopy
• DB51/T 1694-2013 Determination of Methanol and Oxygen Content in Gasoline by Infrared Spectroscopy
• DB51/T 2041-2015 Determination of hydrogen content in vanadium aluminum alloys Inert gas fusion - thermal conductivity or infrared absorption method

Standard Association of Australia （SAA）, Infrared stability

• AS/NZS 2512.7.1:2006 Methods of testing protective helmets - Determination of stability of protective helmets - Static stability
• AS/NZS 3813:2016 Plastic monobloc chairs — Determination of strength and durability, stability, UV and weathering, and ignitability
• AS/NZS 2512.7.2:1998 Methods of testing protective helmets - Determination of stability of protective helmets - Dynamic stability
• AS/NZS 2512.7.2:2009
• AS/NZS ISO 7176.1:2015
• AS/NZS 1050.32:1994 Methods for the analysis of iron and steel - Determination of carbon content - Infrared method
• AS/NZS 2512.7.1:1998 Methods of testing protective helmets Method 7.1: Determination of stability of protective helmets-Static stability
• AS 3587.5:1998 Ferroalloys - Chemical analysis - Determination of sulfur content - Infrared method
• AS 3587.4:1998 Ferroalloys - Chemical analysis - Determination of carbon content - Infrared method
• AS 2512.7.1:2006 Methods of testing protective helmets Method 7.1: Determination of stability of protective helmets—Static stability

ESDU - Engineering Sciences Data Unit, Infrared stability

• ESDU 74019 B-1981 THE STABILITY AND RESPONSE OF LINEAR SYSTEMS PART I: INTRODUCTORY CONCEPTS OF STABILITY
• ESDU 74020 C-2007 The stability and response of linear systems. Part II: methods of displaying stability characteristics.
• ESDU 74020 B-1981 THE STABILITY AND RESPONSE OF LINEAR SYSTEMS PART II: METHODS OF DISPLAYING STABILITY CHARACTERISTICS
• AERO S.00.03.09 A-1982 Properties of plane steady shock waves.

YU-JUS, Infrared stability

• JUS U.E7.116-1980 Stability ofarchgirders

International Truck and Engine Corporation (ITEC), Infrared stability

• INTERN CEMS GT-3C-2009 Dip Paint Stability
• INTERN CEMS GT-4B-2009 Color Stability Of Paint
• INTERN CEMS GT-3B-2009 Storage Stability Of Paint
• INTERN CEMS GT-10-2009 Heated Paint Stability Test
• INTERN CEMS BT-47-2009 Stability Test For Distillate Fuel

Jiangxi Provincial Standard of the People's Republic of China, Infrared stability

• DB36/T 1131-2019 Determination of SBS and SBR Modifier Content in Modified Asphalt by Infrared Spectroscopy

General Motors Corporation (GM), Infrared stability

• GM 9984266-1995 UV Stabilizer Coatings for Lighting Applications Revision A

Canadian General Standards Board （CGSB), Infrared stability

• CGSB 1-GP-71 METH 30.6-1980 Methods of Testing Paints and Pigments Accelerated Stability Heat Stability
• CGSB 1-GP-71 METH 31.3-1982 Methodes D'Essai Des Peintures Et Pigments Stabilite A Basse Temperature Stabilite A -20 Degrees C

海关总署, Infrared stability

• SN/T 5351-2021 Determination of hydrogen in aluminum and aluminum alloys by inert gas melting-infrared absorption method

Professional Standard - Ferrous Metallurgy, Infrared stability

• YB/T 5339-2015 Ferrophosphorus.Determination of carbon content.The infrared absorption method
• YB/T 5341-2015 Ferrophosphorus.Determination of sulfur content.The infrared absorption method
• YB/T 4305-2012 Steel, iron and alloy.Determination of oxygen content.Infrared method after fusion under inert gas
• YB/T 4311-2012 Molybdenum oxide.Determination of sulfur content.The infrared absorption method
• YB/T 4312-2012 Molybdenum oxide.Determination of carbon content.The infrared absorption method
• YB/T 109.6-2012 Silicon barium alloy.Determination of carbon content.The infrared absorption method
• YB/T 109.7-2012 Silicon barium alloy.Determination of sulfur content.The infrared absorption method
• YB/T 5333-2009 Determination of sulfur content in vanadium pentoxide by infrared absorption method

Yunnan Provincial Standard of the People's Republic of China, Infrared stability

• DB53/T 749-2016 Determination of Moisture in Industrial Silica Fume by Infrared Heating Method
• DB53/T 512-2013 Determination of Blending Uniformity of Secondary Re-cut Microwave Expanded Shredded Stems by Near Infrared Spectroscopy

GB-REG, Infrared stability

• REG 46 CFR PART 178-2011 INTACT STABILITY AND SEAWORTHINESS

European Committee for Electrotechnical Standardization（CENELEC）, Infrared stability

• EN 60240-1:1994 Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1: Short Wave Infra-Red Emitters

Professional Standard - Coal, Infrared stability

• MT/T 560-2008 Classification for thermal stability value of coal
• MT/T 560-1996 Thermal Stability Classification of Coal

国家安全生产监督管理总局, Infrared stability

• MT/T 560-2007 Thermal Stability Classification of Coal

AT-ON, Infrared stability

• ONORM K 1103-1991 Wheelchairs — Determination of static stability

GM Daewoo, Infrared stability

• GMKOREA EDS-T-7770-2011 Determination of Heat Stability of Brake Fluids

Hebei Provincial Standard of the People's Republic of China, Infrared stability

• DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

Professional Standard - Environmental Protection, Infrared stability

• HJ 1051-2019 Soil Petroleum Determination Infrared Spectrophotometry
• HJ 919-2017 Determination of Volatile Organic Compounds in Ambient Air by Portable Fourier Transform Infrared Apparatus

Association of German Mechanical Engineers, Infrared stability

• VDI 3866 Blatt 2-2001 Determination of asbestos in technical products - Infrared spectroscopy method

CEN - European Committee for Standardization, Infrared stability

• EN 17009:2019 Flooring of lignified materials other than wood - Characteristics@ assessment and verification of constancy of performance and marking
• PREN 934-6-2017 Admixtures for concrete@ mortar and grout - Part 6: Sampling@ assessment and verification of the constancy of performance

International Commission on Illumination (CIE), Infrared stability

• CIE 245-2021 Optical Safety of Infrared Eye Trackers Applied for Extended Durations

Society of Automotive Engineers (SAE), Infrared stability

• SAE J1096-2021 Measurement of Exterior Sound Levels for Heavy Trucks Under Stationary Conditions
• SAE J1096-2000 Measurement of Exterior Sound Levels for Heavy Trucks Under Stationary Conditions
• SAE AIR41-1995 Stability of Aircraft Greases
• SAE J1248-2010 Performance Requirements for Parking Stability of Motorcycles
• SAE J1248-2022 Performance Requirements for Parking Stability of Motorcycles

Instrument Society of America (ISA), Infrared stability

• ISA TR75.04.01-1998 Control Valve Position Stability

ZA-SANS, Infrared stability

• SANS 824:2006 Lime for soil stabilization
• SANS 5976:2005 Heat-cool stability of wax polishes

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Infrared stability

• IPC TM-650 2.6.11.1-2000 Hydrolytic Stability - Conformal Coating
• IPC TM-650 2.3.39-2004 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision C

SAE - SAE International, Infrared stability

• SAE AIR41-1955 Stability of Aircraft Greases

International Federation of Trucks and Engines, Infrared stability

• NAVISTAR CEMS GT-3B-2015 VOID - Storage Stability Of Paint
• NAVISTAR CEMS GT-4B-2015 VOID - Color Stability Of Paint
• NAVISTAR CEMS DT-11-2001 Heat Stability of Thermoplastic Trim Materials

SE-SIS, Infrared stability

• SIS 83 95 05-1972 Arm-chairs. Determination of stability
• SIS SS 83 95 07-1979 Children's dining stools — Determination of stability
• SIS SEN 04 05 12

Professional Standard - Medicine, Infrared stability

• YY/T 0631-2008 Dental materials.Determination of colour stability

Shandong Provincial Standard of the People's Republic of China, Infrared stability

• DB37/T 4417-2021 Determination of SBR content in SBR modified emulsified asphalt (infrared spectroscopy)
• DB37/T 2977-2017 Technical Regulations for Determination of SBS Modifier Content in Road Asphalt (Infrared Spectroscopy)

Professional Standard - Electricity, Infrared stability

• DL/T 1607-2016 Measurement of sulfur hexafluoride decomposition using infrared spectroscopy method

Professional Standard - Tobacco, Infrared stability

• YC/T 30-1996 Cigarettes--Determination of carbon monoxide in the gas phase of smoke--NDIR method

NO-SN, Infrared stability

• NS 9803-1993 Water analysis. Determination of oil in water. Infrared spectrophotometric method

IN-BIS, Infrared stability

• IS 12674 Pt.2-1989
• IS 5967 Pt.2-1988

BE-NBN, Infrared stability

• NBN 771-09-1969
• NBN 813-11-1970
• NBN T 42-901-1977 Plastic fittings - Determination of the dimensional stability
• NBN E 52-006 ADD 2-1987

National Aeronautics and Space Administration (NASA), Infrared stability

• NASA NACA-TN-1627-1948 Effect of steady rolling on longitudinal and directional stability
• NASA NACA-TN-1193-1947 Effect of product of inertia on lateral stability
• NASA NACA-TR-1042-1951 Some effects of nonlinear variation in the directional-stability and damping-in-yawing derivatives on the lateral stability of an airplane

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Infrared stability

• AHRI 1330-2014 Performance Rating for Radiant Output of Gas Fired Infrared Heaters

GOSTR, Infrared stability

• GOST 30473-1996 Wheelchairs. Method of determination for static stability

VE-FONDONORMA, Infrared stability

• NORVEN 46-1-1962

PT-IPQ, Infrared stability

• NP 307-1962 Carraaux de faSence. Essai de tréssaillage

International Telecommunication Union (ITU), Infrared stability

• ITU-T G.214-1988 Line stability of cable systems

US-FCR, Infrared stability

• FCR COE ETL 1110-2-318-1990 DYNAMIC STABILITY OF DUMPED RIPRAP

中华人民共和国环境保护部, Infrared stability

• GB 9801-1988 Air quality--Determination of carbon monoxide--Non- disperisive infrared spectrometry

Professional Standard - Petrochemical Industry, Infrared stability

• SH/T 1727-2004 Butadiene rubber--Determination of microstructure by infra-red spectrometry
• SH/T 1727-2017 Determination of Microstructure of Butadiene Rubber by Infrared Spectroscopy

Professional Standard - Ocean, Infrared stability

• HY/T 150-2013 Determination of organic carbon in sea water by nondispersive infrared absorption spectrometry

Xinjiang Provincial Standard of the People's Republic of China, Infrared stability

• DB65/T 4372-2021 Determination of Petroleum in Solid Waste Infrared Spectrophotometry

Professional Standard - Urban Construction, Infrared stability

• CJ/T 79-1999 Municipal sewage.Determination of total organic carbon.Nondispersive infrared method

Henan Provincial Standard of the People's Republic of China, Infrared stability

• DB41/T 1569-2018 Determination of Fixed Carbon Content in Graphite Ore High Frequency Combustion Infrared Absorption Method

其他未分类, Infrared stability

• BJS 202107

Professional Standard - Chemical Industry, Infrared stability

• HG/T 4916-2016 Textile dyeing and finishing auxiliaries.Hydrogen peroxide stabilizer.Determination of stabilizing ability

Others:   oil stability, infrared, Stability of matter, solution stability, Solution stability, High stability infrared spectrum, Stability Infrared Spectroscopy, Infrared stability, Infrared stability, Instrument stability, Solvent Stability, lead stability, Aldehyde stability, Stability of fluorescence, Spectral Stability, solution stable, emulsion stability, liquid stability, stability infrared, Infrared of toluene.