ZH
RU
ES

Fitting tolerances of bearings and shafts

Fitting tolerances of bearings and shafts, Total:318 items.

In the international standard classification, Fitting tolerances of bearings and shafts involves: Bearings, Non-ferrous metals, Screw threads, Linear and angular measurements, Shafts and couplings, Rotating machinery, Horology, Materials and components for railway engineering, Small craft, Lifting equipment, Fluid power systems, Components for aerospace construction, Fasteners, Seals, glands, Characteristics and design of machines, apparatus, equipment, Rubber and plastics products, Road engineering, Railway engineering in general.

Professional Standard - Agriculture, Fitting tolerances of bearings and shafts

GB/T 1801-1979 Tolerance and fit dimension to 500mm hole, shaft tolerance zone and fit
GB/T 1803-1979 Tolerance and fit dimensions up to 18 mm hole, shaft tolerance zone
GB/T 1802-1979 Tolerance and matching dimensions greater than 500 to 3150 mm common hole and shaft tolerance zone

Taiwan Provincial Standard of the People's Republic of China, Fitting tolerances of bearings and shafts

CNS 7946-1981 Tolerances for the Mounting of Rolling Bearings, General Guidelines
CNS 6310-1980 Roller Bearings for Electric Traction, Selection of Fit for Shafst and Housiugs
CNS 5506-1980 Ball Bearings, Conrad Type,for Electrical Machines Tolerances and Radinl Clearance

German Institute for Standardization, Fitting tolerances of bearings and shafts

DIN 620-2:1988-02 Rolling bearings; tolerances for rolling bearings; tolerances for radial bearings / Note: To be replaced by DIN 620-2 (1999-10).
DIN 620-3:1982 Rolling bearings; tolerances for thrust bearings
DIN 620-3:1982-06 Rolling bearings; tolerances for thrust bearings
DIN 7155-1:1966-08 ISO-fits for the shaft basis system; tolerance zones, deviations
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN 7155-2:1966-08 ISO-fits for the shaft basis system; tolerances of fit (clearances and interferences)
DIN 31670-8:1986-07 Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars
DIN 620-1:1982 Rolling bearings; Gauging methods for dimensional and running tolerances
DIN 31670-8:1986 Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars
DIN 620-1:1982-06 Rolling bearings; Gauging methods for dimensional and running tolerances
DIN 617:2022-10 Rolling bearings - Needle roller bearings with cage - Boundary dimensions, geometrical product specification (GPS) and tolerance values
DIN ISO 3548:2001 Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test (ISO 3548:1999)
DIN ISO 4382-2:1992-11 Plain bearings; copper alloys; wrought copper alloys for solid plain bearings; identical with ISO 4382-2:1991
DIN 42966:1961 Ball bearings, conrad type, for electrical machines; tolerances and radial clearance
DIN 15082-2:1977 Cranes; crane rail wheels with roller bearings, pressed-on gear wheels
DIN ISO 12090-2:2016-08 Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 2: Boundary dimensions and tolerances for series 4 and 5 (ISO 12090-2:2011)
DIN ISO 6525:1986-05 Plain bearings; ring type thrust washers made from strip; dimensions and tolerances; identical with ISO 6525, edition 1983 / Note: To be replaced by DIN ISO 6525 (2022-11).
DIN ISO 6525:2022-11 Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances (ISO 6525:2018); Text in German and English / Note: Date of issue 2022-10-21*Intended as replacement for DIN ISO 6525 (1986-05).
DIN ISO 12090-1:2016-08 Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 1: Boundary dimensions and tolerances for series 1, 2 and 3 (ISO 12090-1:2011)
DIN ISO 6526:1986-05 Plain bearings; pressed bimetallic half thrust washers; features and tolerances; identical with ISO 6526, edition 1983 / Note: To be replaced by DIN ISO 6526 (2022-11).
DIN ISO 6547:1983-06 Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
DIN 7178-4:1986 System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; axial displacements
DIN ISO 4382-1:1992-11 Plain bearings; copper alloys; cast copper alloys for solid and multilayer thick-walled plain bearings; identical with ISO 4382-1:1991
DIN ISO 12090-2:2016 Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 2: Boundary dimensions and tolerances for series 4 and 5 (ISO 12090-2:2011)
DIN ISO 12090-1:2016 Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 1: Boundary dimensions and tolerances for series 1, 2 and 3 (ISO 12090-1:2011)
DIN ISO 6525:2023-10 Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances (ISO 6525:2018)
DIN ISO 13012-2:2020 Rolling bearings - Accessories for sleeve type linear ball bearings - Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5 (ISO 13012-2:2018); Text in German and English
DIN 1495-1:2019-08 Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors - Part 1: Spherical bearings, dimensions and tolerances
DIN 1495-2:2019-08 Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors - Part 2: Cylindrical bearings, dimensions and tolerances
DIN ISO 6547:1983 Hydraulic fluid power-cylinder; piston seal housings incorporating bearing rings; dimensions and tolerances
DIN ISO 13012-1:2020 Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3 (ISO 13012-1:2018); Text in German and English
DIN ISO 13012-1:2021-07 Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3 (ISO 13012-1:2018)
DIN 9015-1:1986 Aerospace; ISO-fits for airframe construction (except mounting of roller bearings)
DIN EN 4033:2008 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads; German and English version EN 4033:2007
DIN 9015-2:1986 Aerospace; ISO-fits for engine construction (except mounting of roller bearings)
DIN 9015-1:1986-12 Aerospace; ISO-fits for airframe construction (except mounting of roller bearings)
DIN ISO 13012-1:2021 Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3 (ISO 13012-1:2018)
DIN 9015-2:1986-12 Aerospace; ISO-fits for engine construction (except mounting of roller bearings)

RO-ASRO, Fitting tolerances of bearings and shafts

STAS 6671-1977 ROLLING BEARINGS Mounting tolerances and fits

International Organization for Standardization (ISO), Fitting tolerances of bearings and shafts

ISO/DIS 12129-1 Plain bearings — Tolerances — Part 1: Fits
ISO 12129-1:2019 Plain bearings — Tolerances — Part 1: Fits
ISO 492:2014 Rolling bearings - Radial bearings - Dimensional and geometrical tolerances
ISO 20515:2007 Rolling bearings - Radial bearings, retaining slots - Dimensions and tolerances
ISO 20515:2012 Rolling bearings - Radial bearings, retaining slots - Dimensions and tolerances
ISO 464:1995 Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
ISO 13012-2:2018 Rolling bearings — Accessories for sleeve type linear ball bearings — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5
ISO 3547:1976 Plain bearings; Wrapped bushes; Dimensions, tolerances and methods of checking
ISO 3245:2007 Rolling bearings - Needle roller bearings, drawn cup without inner ring - Boundary dimensions and tolerances
ISO 3245:2023 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 4379:1978 Plain bearings — Solid copper alloy bushes _ Dimensions and tolerances
ISO 12129-2:2019 Plain bearings — Tolerances — Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars
ISO 464:2015 Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values
ISO 3245:1974 Rolling bearings; Needle roller bearings, drawn cup, without inner ring; Metric series; Boundary dimensions and tolerances
ISO 2795:1986 Plain bearings made from sintered material; Dimensions and tolerances
ISO 1206:2018 Rolling bearings - Needle roller bearings with machined rings - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 3245:2015 Rolling bearings - Needle roller bearings with drawn cup and without inner ring - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 3548-1:2022 Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test
ISO 3548:1999 Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
ISO 12129-2:1995 Plain bearings - Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
ISO 10317:2008/Amd 1:2013 Rolling bearings.Tapered roller bearings.Designation system.Amendment 1: Design variant designation and comparison of tolerance class designations for single-row tapered roller bearings
ISO/R 286:1962 ISO system of limits and fits; Part I : General, tolerances and deviations
ISO 1206:2023/CD Amd 1 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values — Amendment 2
ISO 286-2:1988 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts
ISO/WD 12090-1 Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 1: Boundary dimensions and tolerances for series 1, 2 and 3
ISO 13012-1:2018 Rolling bearings — Accessories for sleeve type linear ball bearings — Part 1: Boundary dimensions and tolerances for series 1 and 3
ISO/WD 12090-2 Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 2: Boundary dimensions and tolerances for series 4 and 5
ISO 3548-1:2022/AWI Amd 1 Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test — Amendment 1
ISO 3548-1:2022/DAmd 1 Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test — Amendment 1
ISO 3302:1990 Rubber; dimensional tolerances for use with products
ISO 12090-1:2011 Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 1: Boundary dimensions and tolerances for series 1, 2 and 3
ISO 12090-2:2011 Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 2: Boundary dimensions and tolerances for series 4 and 5
ISO 7148-1:1985 Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of the friction and wear behaviour of bearing material/mating material/oil combinations under conditions o
ISO 3548-1:2014 Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test
ISO 8821:1989 Mechanical vibration; balancing; shaft and fitment key convention
ISO 3031:1974 Title missing - Legacy paper document
ISO 3031:1979 Needle roller bearings; Thrust needle roller and cage assemblies, thrust washers; Dimensions and tolerances
ISO 21940-32:2012 Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention
ISO 286-2:1988/Cor 1:2006 ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 6194-1:2007 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances
ISO 1206:2018/FDAmd 1 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values — Amendment 1: Measuring and verification methods
ISO 3302:1976/Amd 1:1983 Rubber — Dimensional tolerances of solid moulded and extruded products — Amendment 1

Korean Agency for Technology and Standards (KATS), Fitting tolerances of bearings and shafts

KS B ISO 12129-1:2022 Plain bearings — Tolerances — Part 1: Fits
KS B ISO 9628:2008 Rolling bearings－Insert bearings and eccentric locking collars－Boundary dimensions and tolerances
KS B ISO 3245:2010 Rolling bearings-Needle roller bearings, drawn cup without inner ring-Boundary dimensions and tolerances
KS B ISO 1224-2-2009(2014) Rolling bearings－Instrument precision bearings－Part 2：Boundary dimensions, tolerances and characteristics of inch series bearings
KS B ISO 1224-1-2009(2014) Rolling bearings－Instrument precision bearings－Part 1：Boundary dimensions, tolerances and characteristics of metric series bearings
KS B ISO 12129-2:2022 Plain bearings — Tolerances — Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars
KS B 2051-1995(2010) Mounting dimensions and fits for rolling bearings
KS V 1210-2012(2017) Small crafts－Fitness of steering wheel and shaft
KS B ISO 12129-2:2002 Plain bearings－Part 2：Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
KS B ISO 3245:2019 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications(GPS) and tolerance values
KS B ISO 6547-2006(2011) Hydraulic fluid power－Cylinders－Piston seal housings incorporating bearing rings－Dimensions and tolerances
KS B ISO 12129-2:2017 Plain bearings — Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
KS B ISO 12129-2-2017(2022) Plain bearings — Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars

KR-KS, Fitting tolerances of bearings and shafts

KS B ISO 12129-1-2022 Plain bearings — Tolerances — Part 1: Fits
KS B ISO 12129-2-2022 Plain bearings — Tolerances — Part 2: Tolerances on form and position and surface roughness for shafts and thrust collars
KS B ISO 3245-2019 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications(GPS) and tolerance values
KS B ISO 12129-2-2017 Plain bearings — Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars

国家市场监督管理总局、中国国家标准化管理委员会, Fitting tolerances of bearings and shafts

GB/T 39741.1-2021 Plain bearings—Tolerances—Part 1：Fits
GB/T 39743-2021 Plain bearings—Thermoplastic bushes—Dimensions and tolerance
GB/T 39741.2-2021 Plain bearings—Tolerances—Part 2：Tolerances on geometrical characteristics and surface roughness for shafts and thrust collars

SE-SIS, Fitting tolerances of bearings and shafts

SIS SS 508-1990 ISO system of limits and fits — Selection of fits with basic shafts
SIS SS 506-1990 ISO system of limits and fits — Tolerance grades for shafts — Graphical review
SIS SMS 2625-1970 Rolling bearings. Thrust benrings with flat seats. Tolerantes
SIS SS 677-1990 ISO system of limits and fits — Selection of hole- and shaft tolerances for general purposes
SIS SS 504-1990 ISO system of limits and fits — Fundamental deviations for shafts — Graphical review
SIS SS 2144-1990 ISO system of limits and fits — ISO tolerances k3 to k13 for shafts
SIS SS 2151-1990 ISO system of limits and fits — ISO tolerances u5 to u9 for shafts
SIS SS 2138-1990 ISO system of limits and fits — ISO tolerances f3 to f10 for shafts
SIS SS 2155-1990 ISO system of limits and fits — (SO tolerances z6toz11 for shafts
SIS SS 2157-1990 ISO system of limits and fits — ISO tolerances zb7tozbll for shafts
SIS SS 2131-1990 ISO system of limits and fits — ISO tolerances a9toa13 for shafts
SIS SS 2148-1990 ISO system of limits and fits — ISO tolerances r3 to Rio for shafts
SIS SS 2158-1990 ISO system of limits and fits — ISO tolerances zc7 tozc11 for shafts
SIS SS 2154-1990 ISO system of limits and fits — ISO tolerances y6toy10 for shafts
SIS SS 2146-1990 ISO system of limits and fits — ISO tolerances n3 to n9 for shafts
SIS SS 2156-1990 ISO system of limits and fits — ISO tolerances za6 tozall for shafts
SIS SS 2140-1990 ISO system of limits and fits — ISO tolerances g3tog10 for shafts
SIS SS 2150-1990 ISO system of limits and fits — ISO tolerances t5 to t8 for shafts
SIS SS 2145-1990 ISO system of limits and fits — ISO tolerances m3 to m9 for shafts
SIS SS 2152-1990 ISO system of limits and fits — ISO tolerances v5tov8 for shafts
SIS SS 2134-1990 ISO system of limits and fits — ISO tolerances cd5 to cd10 for shafts
SIS SS 2139-1990 ISO system of limits and fits — ISO tolerances fg3 tofglO for shafts
SIS SS 2141-1990 ISO system of limits and fits — ISO tolerances hi tohlS for shafts
SIS SS 2137-1990 ISO system of limits and fits — ISO tolerances ef3 to ef10 for shafts
SIS SS 2153-1990 ISO system of limits and fits — ISO tolerances x5toxW for shafts
SIS SS 2142-1990 ISO system of limits and fits — ISO tolerances/5 to/8 for shafts
SIS SS 2136-1990 ISO system of limits and fits — ISO tolerances e5 to e 10 for shafts
SIS SS 2133-1990 ISO system of limits and fits — ISO tolerances c8 to c12 for shafts
SIS SMS 508-1967 ISO-tolerances. Selection of fits with basic shafts
SIS SS 2149-1990 ISO system of limits and fits — /SO tolerances s3 tos10 for shafts
SIS SS 2143-1990 ISO system of limits and fits — ISO tolerances }s1 tojslS for shafts
SIS SS 505-1990 ISO system of limits and fits — Tolerance grades for holes — Graphical review
SIS SMS 2915-1970 Building-industry jittings Journal supported hinge for over-rebated doors
SIS SMS 2913-1970 Building-industry jittings Journal supported hinges for windows and doors with straight edges
SIS SS-ISO 6547:1985 Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and toler- ances

British Standards Institution (BSI), Fitting tolerances of bearings and shafts

BS ISO 12129-1:2019 Plain bearings. Tolerances. Fits
23/30472145 DC BS ISO 12129-1. Plain bearings. Tolerances - Part 1. Fits
BS 5989 Pt.2:1980 Rolling bearings: metric thrust bearings. Specification for tolerances of thrust ball bearings
BS ISO 464:1995 Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances
BS ISO 20515:2012 Rolling bearings. Radial bearings, retaining slots. Dimensions and tolerances
BS ISO 3245:1997 Rolling bearings - Needle roller bearings, drawn cup without inner rings - Boundary dimensions and tolerances
BS ISO 3245:2008 Rolling bearings. Needle roller bearings, drawn cup without inner ring. Boundary dimensions and tolerances
BS ISO 1206:2001 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
BS ISO 12129-2:2019 Tracked Changes. Plain bearings. Tolerances. Tolerances on form and position and surface roughness for shafts and thrust collars
BS ISO 13012-2:2018 Tracked Changes. Rolling bearings. Accessories for sleeve type linear ball bearings. Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 5
BS ISO 3548-1:2022 Plain bearings. Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
BS ISO 1206:2018 Rolling bearings. Needle roller bearings with machined rings. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BS ISO 13012-1:2018 Tracked Changes. Rolling bearings. Accessories for sleeve type linear ball bearings. Boundary dimensions, geometrical product specifications (GPS) and tolerances for series 1 and 3
BS ISO 12090-1:2011 Rolling bearings. Profiled rail guides for linear motion rolling bearings. Boundary dimensions and tolerances for series 1, 2 and 3
BS 4480-5:1979 Plain bearings: metric series - Dimensions, tolerances and methods of checking thin-walled half bearings
BS ISO 12090-2:2011 Rolling bearings. Profiled rail guides for linear motion rolling bearings. Boundary dimensions and tolerances for series 4 and 5
BS ISO 464:2015 Tracked Changes. Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
BS ISO 3548:1999 Plain bearings - Thin-walled half bearings with or without Flange - Tolerances, design features and methods of test
BS ISO 3548:2000 Plain bearings. Thin-walled half bearings with or without Flange. Tolerances, design features and methods of test
BS ISO 3548-1:2014 Plain bearings. Thin-walled half bearings with or without flange. Tolerances, design features and methods of test
BS 1916-2:2009 Limits and fits for engineering Part 2: Guide to the selection of fits in BS 1916-1
BS ISO 3245:2015 Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BS 4500B:1970 ISO limits and fits - Data sheet: selected ISO fits - shaft basis
21/30424571 DC BS ISO 1206 AMD1. Rolling bearings. Needle roller bearings with machined rings. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BS ISO 1206:2023 Tracked Changes. Rolling bearings. Needle roller bearings with machined rings. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
21/30406893 DC BS ISO 3548-1. Plain bearings. Thin-walled half bearings with or without flange. Part 1. Tolerances, design features and methods of test
BS 3SP 89:1983 Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings
BS ISO 3245:2023 Tracked Changes. Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
21/30424574 DC BS ISO 3245 AMD1. Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BS ISO 6194-1:2008 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Nominal dimensions and tolerances
3SP 89-1983 Specification for characteristics, boundary dimensions, tolerances and static load ratings of airframe bearings
16/30335547 DC BS ISO 6525. Plain bearings. Ring type thrust washers made from strip. Dimensions and tolerances
BS ISO 6547:1981 Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances
BS ISO 12297-1:2021 Rolling bearings. Cylindrical rollers - Boundary dimensions, geometrical product specifications (GPS) and tolerance values for steel rollers

Professional Standard - Light Industry, Fitting tolerances of bearings and shafts

QB/T 2266-1996 Tolerances and fits for timing instruments with dimensions less than 1 mm Hole and shaft tolerance zone and fit
QB/T 2266-2012 Tolerance zones and fits for holes and shafts size up to 1mm for timekeeping instruments
QB/T 2267-1996 Tolerance and fit dimensions for timing instruments to 18mm insert standard tolerance values for intermediate tolerance classes

Association Francaise de Normalisation, Fitting tolerances of bearings and shafts

NF E22-513:1987 Plain bearings. Solid copper alloy bushes. Dimensions and tolerances.
NF E22-505:1987 Plain bearings. Shaft diameters for unsplit bushes.
NF ISO 3228:2013 Roulements - Logements moulés et emboutis pour roulements "insert" - Dimensions d'encombrement et tolérances
NF E22-372:1998 Rolling bearings. Needle roller bearings, drawn cup without inner rings. Boundary dimensions and tolerances.
NF E22-370/A1:2013 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances - Amendment 1 : tolerances for shaft raceways
NF E22-302:1997 Rolling bearings. Radial bearings with locating snap ring. Dimensions and tolerances.
NF F18-102:1990 Railway rolling stock. Roller bearing axle boxes for outside axle journals. Tolerances. Surface finish.
NF E22-372:2008 Rolling bearings - Needle roller bearings, drawn cup without inner rings - Boundary dimensions and tolerances.
NF E22-370:2002 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances.
NF F01-121:1989 Rolling stock. Axles for roller-bearing axle-boxes. Tolerances. Surface conditions. Special dimensional indications.
NF E22-302*NF ISO 464:2016 Rolling bearings - Radial bearings with locating snap ring - Dimensions, geometrical product specifications (GPS) and tolerance values
NF ISO 1206:2023 Roulements - Roulements à aiguilles avec bagues usinées - Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance
NF ISO 10317/A1:2013 Roulements - Roulements à rouleaux coniques - Système de désignation - Amendement 1 : désignation de la variante de conception et comparaison des désignations de la classe de tolérance pour les roulements à rouleaux coniques à une rangée
NF E22-370*NF ISO 1206:2018 Rolling bearings - Needle roller bearings with machined rings - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
NF E22-343-2:2009 Rolling bearings - Accessories for sleeve type linear ball bearings - Part 2 : boundary dimensions and tolerances for series 5.
NF ISO 12090-2:2011 Roulements - Guidages sur rail profilé pour roulements pour mouvement linéaire - Partie 2 : dimensions d'encombrement et tolérances pour les séries 4 et 5
NF E22-341/A1*NF ISO 10317/A1:2013 Rolling bearings - Tapered roller bearings - Designation system - Amendment 1 : design variant designation and comparison of tolerance class designations for single-row tapered roller bearings
NF ISO 12090-1:2011 Roulements - Guidages sur rail profilé pour roulements pour mouvement linéaire - Partie 1 : dimensions d'encombrement et tolérances pour les séries 1, 2 et 3
NF E22-343-1:2009 Rolling bearings - Accessories for sleeve type linear ball bearings - Part 1 : boundary dimensions and tolerances for series 1 and 3.
NF E22-372*NF ISO 3245:2016 Rolling bearings - Needle roller bearings with drawn cup and without inner ring - Boundary dimensions, geometrical product specifications (GPS) and tolerance values
NF E02-100-2:1993 Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.
NF E22-521:1984 Plain bearings. Pressed bimetallic half thrust washers. Features and tolerances.
NF E27-432:1984 Metric screw hexagon head metal plugs with collar joints for use with gaskets.
NF E48-039*NF ISO 6547:2006 Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and tolerances.
NF ISO 1132-2:2002 Roulements - Tolérances - Partie 2 : principes et méthodes de mesurage et de vérification par calibre
NF E22-342-2*NF ISO 12090-2:2011 Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 2 : Boundary dimensions and tolerances for series 4 and 5
NF E22-342-1*NF ISO 12090-1:2011 Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 1 : Boundary dimensions and tolerances for series 1, 2 and 3
NF E27-435:1986 Metric screw hexagon socket cylindrical head metal plugs with collar joints for use with O-rings.
NF E27-434:1984 Metric screw hexagon socket cylindrical head metal plugs with collar joints for use with gaskets.
NF E27-433:1984 Metric screw hexagon head metal plugs with collar joints for use with O. Rings.
NF F00-011:1973 Railway material in general. Tolerances and fits used particularly for fixed parts of articulations. Interference fits.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fitting tolerances of bearings and shafts

GB/T 2509-1981 Copper alloy integrated shaft sleeves for plain bearings--Types, dimensions and tolerances
GB/T 275-1993 Shaft and housing fits for rolling bearings
GB/T 2685-1981 Powder metallurgy plain bearing--Cylindrical type--Types,dimensions and tolerances
GB/T 2687-1981 Powder metallurgy plain bearing--Spherical type--Types,dimensions and tolerances
GB/T 1803-2003 Limits and fits Tolerance zones for holes and shafts size up to 18mm
GB/T 2510-1981 Copper alloy integrated shaft sleeves for plain bearings with gears--Types, dimensions and tolerances
GB/T 3162-1991 Plain bearings--Thin-walled bearing shells--Dimensions,structure elements and tolerances
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 2686-1981 Powder metallurgy plain bearing--Rimed cylindrical type--Types,dimensions and tolerances
GB/T 18323-2001 Plain bearings--Sintered bushes--Dimensions and tolerances
GB/T 5800.1-2012 Rolling bearings.Instrument precision bearings.Part 1:Boundary dimensions,tolerances and characteristics of metric series bearings
GB/T 5800.2-2012 Rolling bearings.Instrument precision bearings.Part 2:Boundary dimensions,tolerances and characteristics of inch series bearings
GB/T 1801-1999 Limits and fits Selection of tolerance zones and fits
GB/T 5371-1985 Tolerances and fits--The calculation and selection of interference fits
GB/T 1800.2-2009 Geometrical Product Specifications (GPS) Limits and fits--Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 305-1998 Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances
GB/T 1800.2-1998 Limits and fits--Bases--Part 2: Basic rules of tolerances, deviations and fits
GB/T 16908-1997 Mechanical vibration--Balancing--Shaft and fitment key convention
GB/Z 24636.5-2010 Geometrical product specifications (GPS).Statistical tolerance.Part 5:Statistical quality indices of an assembly lot (hole/shaft fits)
GB/T 1800.1-2009 Gemetrical Product Specifications(GPS).Limits and fits.Part 1:Bases of tolerances,deviations and fits
GB/T 1801-2009 Gemetrical Product Specifications(GPS).Limits and fits.Selection of tolerance zones and fits

YU-JUS, Fitting tolerances of bearings and shafts

JUS M.C3.335-1988 Plain bearings. Solid copper alloy busbes. Dimensions and tolerances
JUS M.C3.337-1988 Plain beariugs. Bushes for plain bearings nade from sintered materlal. Dimensions and tolerances
JUS M.C3.356-1989 Plain bearings. Pressed bimetallic half thrust washers. Features and tolerances
JUS M.C3.355-1989 Plain beariugs. Ring type thrust vashers made from strip. Dimensions and tolerances

Professional Standard - Machinery, Fitting tolerances of bearings and shafts

JB/ZQ 4006-2006 Limit and fit - Tolerance and fit for hole and shaft of 3,150 to 10,000 mm in size
JB/T 8995.2-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.Tolerance stripsand fits for size of holes and shafts above 500mm to 3150mm
JB/T 5305-2006 Rolling bearings.Thrust ball bearings with sphered housing washer.Tolerances
JB/T 6644-1993 Dimensions and tolerances of rolling bearing needle roller and double direction axial cylindrical roller combined bearings
JB/T 8995.3-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.Common used tolerance strips for size of holes and shafts above 3150mm to 16000mm
JB/ZQ 4285-2006 Light shrinking-on between gear hole and axis (with keys)

Indonesia Standards, Fitting tolerances of bearings and shafts

SNI 05-1200-1989 Boundary dimensions and tolerances of rolling bearings

CZ-CSN, Fitting tolerances of bearings and shafts

CSN 02 4602-1981 Rolling bearings. Tolerances. Terminology and definitions.
CSN 02 3415-1990 Plainbearings.Thrustwashers.Type, dimensions and tolerances
CSN 02 3499-1980 Plain bearings. Metal bushings. Types, dimensions and tolerances
CSN 02 3495-1980 Plain bearings. Bimetallic bushings. Types, dimonsions and tolerances
CSN 02 4609-1978 Radial internal olearanoe in radisl rolling bearings
CSN 02 3481-1988 Plain bearings. Self lubricated sintered bushes. Type,dimensions, tolerances
CSN 02 3406-1990 Plain bearings.Wrapped bushes with slide layer on the basis of polytetrafluorethyle-ne - KU.Dimensions and tolerances

IN-BIS, Fitting tolerances of bearings and shafts

FI-SFS, Fitting tolerances of bearings and shafts

American Bearing Manufacturers Association, Fitting tolerances of bearings and shafts

ABMA 7-1995(R2008) Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller Bearings) Conforming to Basic Boundary Plan
ABMA 7-1995 Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller Bearings) Conforming to Basic Boundary Plan
ABMA 4-1994(R2008) Tolerance Definitions and Gauging Practices for Ball and Roller Bearings

ABMA - American Bearing Manufacturers Association, Fitting tolerances of bearings and shafts

7-1995 Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller Bearings) Conforming to Basic Boundary Plan
4-1994 Tolerance Definitions And Gauging Practices For Ball and Roller Bearings

AT-ON, Fitting tolerances of bearings and shafts

ONORM M 6319 Teil.1-1985 Rolling bearings; rolling elements: balls; dimensions and tolerances
ONORM M 1312-1992 ISO-System of limits and fits - Selection of fits in the hole basis and shaft basis system of fits for dimensions up to 500 mm
ONORM M 6319 Teil.2-1986 Rolling bearings; rolling elements: cylindrical rollers; dimensions and tolerances
ONORM ISO 6547:1983 Hydraulic fluid power; Cy linders; Piston sealhousings incorporating bearing rings; Dimensions and tolerances
ONORM M 3475-1982 Materials for piain bearings; wrought copper alloys; properties, shapesfor delivery, permissible deviations and tolerances
ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts
ONORM M 1310-1992 ISO-System of limits and fits - Selection of tolerance classes for dimensions up to 500 mm
ONORM EN 20286-2-1993 ISO System of limits and fits - Part 2: Tables of Standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)

Japanese Industrial Standards Committee (JISC), Fitting tolerances of bearings and shafts

JIS B 1510:2010 Rolling bearings -- Radial bearings, retaining slots -- Dimensions and tolerances
JIS B 1509:2005 Rolling bearings -- Radial bearings with locating snap ring -- Dimensions and tolerances
JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS B 1536-5:2008 Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 5: Track rollers
JIS B 1536-2:2008 Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 2: Drawn cup without inner ring
JIS B 1566:1989 Mounting dimensions and fits for rolling bearings
JIS B 1536-1:2008 Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 1: Dimension series 48, 49 and 69
JIS B 1536-3:2008 Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 3: Radial needle roller and cage assemblies
JIS B 1536-4:2008 Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 4: Thrust needle roller and cage assemblies, thrust washers
JIS B 1585-1:2017 Plain bearings -- Thin-walled half bearings with or without flange -- Part 1: Tolerances, design features and methods of test
JIS B 1536-1:2021 Rolling bearings -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values of needle roller bearings -- Part 1: Machined rings
JIS B 1536-5:2021 Rolling bearings -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values of needle roller bearings -- Part 5: Track rollers
JIS B 1536-2:2019 Rolling bearings -- Boundary dimensions, geometrical product specifications (GPS) and tolerance values of needle roller bearings -- Part 2: Drawn cup without inner ring
JIS B 0401-2 ERRATUM 1:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts (Erratum 1)

American National Standards Institute （ANSI), Fitting tolerances of bearings and shafts

ANSI/ABMA 7-1995 Shaft and Housing Fits for Metric Radial Ball and Roller Bearings (Except Tapered Roller Bearings) Conforming to Basic Boundary Plans
ANSI B4.2-1978 Preferred Metric Limits and Fits
ANSI/ABMA 4-1994 Tolerance Definition and Gauging Practices for Ball and Roller Bearings

Standard Association of Australia （SAA）, Fitting tolerances of bearings and shafts

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts
AS 1654.1:1995 ISO system of limits and fits - Bases of tolerances, deviations and fits

RU-GOST R, Fitting tolerances of bearings and shafts

GOST 29203-1991 Plain bearings. Pressed bimetallic half thrust washers. Features and tolerances
GOST 28773-1990 Plain bearings. Wrapped bushes with anti-friction layer based on polytetrafluoroethylene-KV. Dimensions and tolerances
GOST 28774-1990 Plain bearings. Wrapped bushes with anti-friction layer based on polyacetal-KX. Types, dimensions and tolerances
GOST ISO 3548-2002 Plain bearings. Thin-walled half bearings with or without flange. Tolerances, design features and methods of checking
GOST 27672-1988 Plain bearings. Wrapped bushes. Dimensions, tolerances and methods of checking
GOST 8790-1979 Rectangular parallel keys with screwing on the shafts. Dimensions
GOST 25307-1982 Basic norms of interchangeability. Cone joining system of limits and fits

NO-SN, Fitting tolerances of bearings and shafts

NS 5851-1983 Plain bearings made from sintered materials - Dimensions and tolerances

VN-TCVN, Fitting tolerances of bearings and shafts

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts

ZA-SANS, Fitting tolerances of bearings and shafts

SANS 3548:2005 Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
SANS 12129-2:2006 Plain bearings Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
SANS 286-2:1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

Danish Standards Foundation, Fitting tolerances of bearings and shafts

DS/EN 20286-2:1993 ISO system of limits and fits. Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
DS/ISO 3302:1984 Rubber. Dimensional tolerances of solid moulded and extruded products
DS/ISO 6547:1989 Hydraulic fluid power. Cylinders. Piston seal housings incorporating bearing rings. Dimensions and tolerances

未注明发布机构, Fitting tolerances of bearings and shafts

BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts

NL-NEN, Fitting tolerances of bearings and shafts

NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen
NEN-ISO 286-1:1989 ISO-passingstelsel. Deel 1: Grondslagen van toleranties, grensmaatafwijkingen en passingen
NEN 2807-1993 ISO-system of limits and fits. Preferred fits for general purpose for dimensions from 1 up to and including 500 mm

European Committee for Standardization (CEN), Fitting tolerances of bearings and shafts

prEN 20286-2-1992 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)
EN 20286-2:1993 ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts ISO 286-2 : 1988
EN 4033:2007 Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads

ES-AENOR, Fitting tolerances of bearings and shafts

UNE 18-159-1989

AGMA - American Gear Manufacturers Association, Fitting tolerances of bearings and shafts

90FTM3-1990 Simulation of Meshing@ Transmission Errors and Bearing Contact for Single-Enveloping Worm-Gear Drives

Society of Automotive Engineers (SAE), Fitting tolerances of bearings and shafts

SAE AS1421-2006 Aerospace Selected Diameter - Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads

SAE - SAE International, Fitting tolerances of bearings and shafts

SAE AS1421-1976 Aerospace Selected Diameter - Pitch Combinations of Metric 60 Degree Screw Threads for Shaft or Bearing Retaining Screw Threads
SAE AS1421A-2010 Aerospace Selected Diameter - Pitch Combinations of Metric 60 degrees Screw Threads for Shaft or Bearing Retaining Screw Threads

(U.S.) Ford Automotive Standards, Fitting tolerances of bearings and shafts

FORD WSS-M8A19-A4-2006 BEARINGS, ALUMINUM SILICON STEEL BACKED ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Railway, Fitting tolerances of bearings and shafts

TB/Z 8-1985 Relationship between Surface Roughness and Tolerance of Communication Signal Products