ZH
RU
ES

Metrology testing standardization

Metrology testing standardization, Total:498 items.

In the international standard classification, Metrology testing standardization involves: Paper and board, Linear and angular measurements, Non-destructive testing, Measurement of volume, mass, density, viscosity, Electronic components in general, Construction industry, Nuclear energy engineering, Wood, sawlogs and sawn timber, Quality, Ventilators. Fans. Air-conditioners, Construction of waterways and ports, Power transmission and distribution networks, Organic chemicals, Aerospace electric equipment and systems, Optics and optical measurements, Lighting, Software development and system documentation, Water quality, Vocabularies, Analytical chemistry, Corrosion of metals, Equipment for petroleum and natural gas industries, Explosion protection, Radiation measurements, Company organization and management, Petroleum, petroleum products and natural gas handling equipment, Thermodynamics and temperature measurements, Natural gas, Rubber, Paints and varnishes, Metrology and measurement in general, Road engineering, Testing of metals, Electric road vehicles, Mechanical testing, Pharmaceutics, Air quality, Burners. Boilers, Wastes, Electricity. Magnetism. Electrical and magnetic measurements, Standardization. General rules, Protection of and in buildings, Measurement of force, weight and pressure, Applications of information technology, Languages used in information technology, Products of the textile industry, Domestic safety, Alarm and warning systems, Fuels, IT terminal and other peripheral equipment, Medical equipment, Law. Administration, Farm buildings, structures and installations, Petroleum products in general, Measurement of fluid flow, Installations in buildings, Geology. Meteorology. Hydrology, Interface and interconnection equipment, Products of the chemical industry, Semiconducting materials, Soil quality. Pedology, Rubber and plastics products, Farming and forestry, Environmental protection, Lifting equipment, Construction materials, Pipeline components and pipelines, Powder metallurgy, Earthworks. Excavations. Foundation construction. Underground works.

CN-STDBOOK, Metrology testing standardization

图书 3-8266 Metrological Test Standardization
图书 A-4725 Guidelines for establishing standards for chemical measuring instruments: Implementation and application of JJF 1033-2016 "Measurement Standard Assessment Specification"
图书 A-4466 Wu Chengluo and Modern Chinese Metrology and Industrial Standardization

International Organization for Standardization (ISO), Metrology testing standardization

ISO/TS 20460:2015 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
ISO 3951-5:2006 Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
ISO 5024:1999 Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions
ISO/TR 23358:2022 Health informatics — A case study on establishing standardized measurement data in cardiac examination reports

Korean Agency for Technology and Standards (KATS), Metrology testing standardization

KS Q 1001-2005 Single sampling inspection plums having desired operationcharacteristics by variables(Standard deviation known)
KS Q 0001-2010 Single sampling inspection plans by variables having desired operating characteristics(known standard deviation)
KS Q 0001-2013 Single sampling inspection plans by variables and attributes
KS A ISO 3951-5:2008 Sampling procedures for inspection by variables-Part 5:Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
KS A ISO 3951-5:2013 Sampling procedures for inspection by variables－Part 5：Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
KS A 3102-1963 Single sampling inspection plans by attributes having desired operating characteristics
KS C IEC 62056-1-0-2017(2022) Electricity metering data exchange – The DLMS/COSEM suite – Part 1-0: Smart metering standardisation framework
KS C IEC 62056-1-0:2017 Electricity metering data exchange – The DLMS/COSEM suite – Part 1-0: Smart metering standardisation framework
KS F 2596-2019 Standard test method for measuring carbonation depth of concrete

Professional Standard - Petrochemical Industry, Metrology testing standardization

SH/T 3206-2019 Petrochemical Design Safety Inspection Standard
SH/T 3545-2011 Specification for NDT on pipelines in petrochemical industry
SH/T 3545-2020 Non-destructive testing standards for petrochemical pipeline engineering
SH 3514-2001 Standard for quality inspection and assessment of petrochemical equipment erection engineerings

RU-GOST R, Metrology testing standardization

GOST 22238-1976 Nondestractiv testing. Mesure-reference for thickness gauges of coverings. General principles
GOST 8.400-1980 State system for ensuring the uniformity of measurements. Standard metallic gauges. Calibration methods
GOST R 56333-2015 Combustible natural gases. Standard conditions of measurement and calculation of physicochemical characteristics
GOST R 8.913-2016 State system for ensuring the uniformity of measurements. Satellite laser ranging systems. Accuracy and measurement uncertainty. Standardized metrological characteristics
GOST R 8.661-2009 State system for ensuring the uniformity of measurements. Oil moisture meters. Norms of metrological characteristics
GOST R 1.11-1999 State system for standardization of Russian Federation. Metrological expert evaluation of state standards projects
GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST 8.235-1977 State system for ensuring the uniformity of measurements. Measuring rack wheels. Methods and means of verification
GOST 8.395-1980 State system for ensuring the uniformity of measurements. Reference conditions of measurements while calibrating. General requirements
GOST 8.287-1978 State system for ensuring the uniformity of measurements. Standard portable dynamometers of the 3-rd grade. Methods and means of calibration
GOST R 8.810-2012 State system for ensuring the uniformity of measurements. Reference materials. The programme and procedure for the determination of metrological characteristics
GOST R ISO 8423-2011 Statistical methods. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
GOST R 56512-2015 Non-destructive testing. Metod of magneting particle testing. Standard technological processes
GOST 8.458-1982 State system for ensuring the uniformity of measurements. The thermoelectrical transducers and comparators. Methods and means of calibration
GOST R 56717-2015 Air quality. Stationary source emission. Guidelines for the elaboration of methods of measurement

National Metrological Verification Regulations of the People's Republic of China, Metrology testing standardization

JJG 1088-2013 Verification Regulation of Standard Devices for Calibration of Ophthalmometers
JJG(纺织) 044-1991 Verification Regulations for Capacitive Evenness Meter Metrology Verification Standard Device
JJG(民航) 016-1995 Technical Norm of Designation for Special Metrological Standard of Civil Aviation
JJG 872-1994 Verification Regulation of Standard Measuring Coils of Magnetic Flux
JJG(铁道) 162-1996 The Rules of Error for Specifical Measuring Standards of Railway
JJG(石油) 02-1990 Verification rules for standard orifice plate for natural gas flow measurement
JJG 735-1991 Verification Regulation of the Standard Dosimeter of Water Absorbed Dose for γ-Rays(Radiation Processing Level)
JJG 887-2014 Standard Tapered Roller Tester
JJG 887-1995 Verification Regulation of Standard Tapered Roller Tester
JJG(核工) 9-1991 ¹³⁷ Cs and ⁶⁰ Coγ standard exposure (rate) meter (protection level) verification regulations
JJG 2039-1989 Verification Scheme of Measuring Instruments for High Accuracy Measurements of Activity and Photon Emission Rate
JJG 783-1992 Verification Regulation of Angle Measuring Instrument for Bearing Ring
JJG 824-1993 Verification Regulation of Biochemical Oxygen Demand after 5 days (BOD<下标5>)Analyzer
JJG(电子) 04022-1989 Specification for verification of Q01 model high frequency low power triode transistor Ft standard measurement meters

HU-MSZT, Metrology testing standardization

CU-NC, Metrology testing standardization

NC 90-20-12-1989 Standards System for Metrological. Assurance. Reference Standard Samples. Standardized Metrological Characteristics
NC 90-14-34-1988 Standards System for Metrological Assurance. Measurements with Liquid-Filled Glass Thermometers. General Rules
NC 00-40-1985 National System for Standardizaron, Metrology and Quality Control. Guide for Drawing-Up of Verification Methods and Means Standards
NC 90-04-15-1986 Metrologioal Assiirance. Glass-Capaclty Standard Measures. Verification Methods and Means
NC 00-37-1987 National System for Standardiza- tion, Metrology and Quality Control. Guide for the Elabora- tion of Precisión Measurement Standards
NC 90-20-10-1988 Standards System for Metrological Arsurance, Carbon Steel AC-AB 3-200. Composition Reference Standards Sampie for Chemical Analysis
NC 90-04-21-1988 Standards System for Metrological Assurance. Measurement of Volume Contained in Storing Vessel by Means of the Sounding Method. General Rules
NC 90-03-14-1988 Standards System for Metrological Assurance. Radiogonometers. Methods and Means of Calibration
NC 90-09-09-1988 Standards System for Metrologxcal Assurance. Standard and Working-Indentors for Measuring Metals Hardness. Methods and Means of Verification
NC 90-08-05-1984 Metrological Assurance. Portable Standard Dynamometers 3. Categors

ZA-SANS, Metrology testing standardization

SANS 1697:2007 Verification standards for the verification of mass-measuring instruments, including commercial standard masspieces
SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume
SANS 3951-5:2008 Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
SANS 62055-21:2006 Electricity metering - Payment systems Part 21: Framework for standardization

Professional Standard - Electron, Metrology testing standardization

SJ/T 10151-1991 Detail specification for electronic components--Silicon NPN case rated bipolar transistor for high-frequency amplification for type 3DA2688

Group Standards of the People's Republic of China, Metrology testing standardization

T/CECS 1121-2022 Design Standards for Construction Waste Reduction
T/GDSM 002-2020 Information system for measuring data and result processing
T/CITS 0010-2022 Technical specification for grade assessment of Inspection and testing enterprise safety and health management system
T/SXCAA 007-2020 Management Requirements for Standard Substances for Chemical Testing
T/CIET 002-2022 Provisions for the Administration of Engineering Quality inspection institutions
T/HNCAA 032-2022 Standard for compiling construction project quality inspection and testing report
T/ZQBJXH 006-2019 Specification for Measuring and Testing Data and Result Processing Informatization Construction
T/ZAMA 1003-2023 Design and testing specifications for new lightweight materials for new energy vehicles
T/CIET 004-2022 Special ability assessment standards for engineering quality testing institutions
T/CECS G:H15-01-2023 Standards for Quality Inspection and Evaluation of Highway Reconnaissance Products
T/CIET 006-2022 Credit evaluation standard for engineering quality inspection institutions
T/CASME 527-2023 Quality Standard and detection method of cannabis herb
T/HNCAA 026-2021 Identification of measuring equipment metrological traceability requirements and confirmation of verification and calibration results
T/HNCAA 044-2023 Standard for foaming quality and testing methods of foamed asphalt
T/HNCAA 031-2022 Electronic Archives Management Standards for Construction Quality Inspection and Testing Institutions
T/CSZX 001.9-2021 Standardization and Standardization Construction Specifications of Grass-roots Bureau of Market Supervision and Administration Bureau Part IX: Standard Metrology Supervision
T/BAS 003-2022 Measurement of fluid flow by means of fixed value standard nozzles meter inserted in circular cross-section conduits running full
T/SDCA 004-2021 Management specifiaction of reference material for quality and safety inspection of agricultural products
T/HZQT 00005-2022 Textile Testing Laboratory Quality Management—Standard Substance Management?
T/HNCAA 033-2022 Standard for testing soil subgrade resilience modulus by falling ball method

American Society for Testing and Materials (ASTM), Metrology testing standardization

ASTM C1592/C1592M-21 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM D6782-13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM E77-66 Standard Method for Inspection, Test, And Standardization Of Liquid-in-Glass Thermometers
ASTM C1592/C1592M-09 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM D7457-11e1 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
ASTM D5612-94(1998) Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
ASTM D5612-94(2018) Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
ASTM G102-89(2010) Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM E2006-05 Standard Guide for Benchmark Testing of Light Water Reactor Calculations
ASTM E2520-15 Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
ASTM E2520-21 Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
ASTM ISO/ASTM 51631-02 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ASTM ISO/ASTM 51631-03 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM E77-14e1 Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-14(2021) Standard Test Method for Inspection and Verification of Thermometers
ASTM D2084-06 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM D2084-95 Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
ASTM E422-05(2016) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM E1753-04 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
ASTM G3-13 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM D5176-91(2003) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D5176-91(1995) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D5176-08 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D6782-05 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6782-04 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM D6782-19 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM E215-16 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
ASTM G199-09 Standard Guide for Electrochemical Noise Measurement
ASTM G199-09(2020)e1 Standard Guide for Electrochemical Noise Measurement
ASTM D5176-08(2015) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM G3-89(2004) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM G3-89(2010) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM D4633-10 Standard Test Method for Energy Measurement for Dynamic Penetrometers
ASTM D4633-16 Standard Test Method for Energy Measurement for Dynamic Penetrometers
ASTM E422-99 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM E422-05 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM D6620-00 Standard Practice for Asbestos Detection Limit Based on Counts
ASTM E2906/E2906M-13 Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
ASTM D6620-19 Standard Practice for Asbestos Detection Limit Based on Counts
ASTM G199-09(2014) Standard Guide for Electrochemical Noise Measurement
ASTM E1753-01 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
ASTM E1753-95 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
ASTM G3-14 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM E2005-05 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM ISO/ASTM51631-02 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
ASTM C1207-10(2018) Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
ASTM D1555M-00 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metric]
ASTM D1555M-04e1 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
ASTM D1555M-04 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
ASTM E422-05(2011) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM G102-89(1999) Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM G102-89(2015)e1 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
ASTM E2380/E2380M-15(2019) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E126-19 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM C1210-06 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C1210-96e1 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C1210-21 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within Nuclear Industry
ASTM C1210-12 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM E422-22 Standard Test Method for Measuring Net Heat Flux Using a Water-Cooled Calorimeter
ASTM E385-90 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM E385-22 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM D8083-16 Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
ASTM E3351-22 Standard Test Method for Detection of Nitric Oxide Production In Vitro
ASTM D7493-14(2018) Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM F1174-01(2006) Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM F1174-01 Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM B487-20 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
ASTM E2031-99(2016) Standard Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM D8083-16(2023) Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
ASTM E3116-23 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D4629-17 Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM E2380-05 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E2380/E2380M-09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E459-05 Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM E2253-03 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-08e1 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E459-22 Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM E459-05(2016) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E337-15 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM D7959-15 Standard Test Method for Chloride Content Determination
ASTM E1475-13(2023) Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
ASTM D4629-12(2017) Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM E825-98 Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E825-98(2003) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E825-98(2009) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM D4629-10 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D4629-12 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D5289-12 Standard Test Method for Rubber Propertymdash;Vulcanization Using Rotorless Cure Meters
ASTM F24-04 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-00 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-09 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM D4129-05 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM D4129-05(2012) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM D4129-05(2013) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM F1727-97 Standard Practice for Detection of Oxidation Induced Defects in Polished Silicon Wafers
ASTM C1324-15 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
ASTM D4944-98 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester Method
ASTM D6069-01(2006) Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D6069-96 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D6069-01 Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D6620-06 Standard Practice for Asbestos Detection Limit Based on Counts
ASTM E457-96 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-96(2002) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E2380/E2380M-15 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E457-08(2015) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E459-05(2011) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM D4891-89(1994)e1 Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
ASTM E1475-13 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
ASTM D6021-96(2001)e1 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM E2583-07(2011) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM ISO/ASTM 51940-22 Standard Guidance for Dosimetry for Sterile Insect Release Programs
ASTM ISO/ASTM51940-22 Standard Guidance for Dosimetry for Sterile Insect Release Programs
ASTM C1324-04 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
ASTM C1324-03 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
ASTM E1118/E1118M-16 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM E1118/E1118M-16(2020) Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
ASTM F1174-12 Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM E2906/E2906M-18(2022) Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles
ASTM D5389-93(1997) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
ASTM D5389-93(2019) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
ASTM D538-85(1997) Standard test method for open channel flow measurement by sonic anemometer systems
ASTM F24-09(2015) Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM F24-20 Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM D7378-16 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
ASTM B329-06(2012) Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM B329-14 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM E385-11 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
ASTM B703-17 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM D4490-96 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM E1935-97(2003) Standard Test Method for Calibrating and Meausring CT Density
ASTM E1935-97 Standard Test Method for Calibrating and Meausring CT Density
ASTM E1935-97(2008) Standard Test Method for Calibrating and Meausring CT Density
ASTM D7493-22 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM G59-97e1 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G5-12 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM D1179-16 Standard Test Methods for Fluoride Ion in Water
ASTM E2583-07 Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM F1172-88(2010) Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
ASTM ISO/ASTM 52628-13 Standard Practice for Dosimetry in Radiation Processing
ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D4535-13e2 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM D4535-21 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM C1514-08(2017) Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle

Association Francaise de Normalisation, Metrology testing standardization

FD X07-014:2006 Metrology - Optimisation of measuring equipment calibration frequencies (metrological confirmation)
NF C42-710:1988 Photometers. Determination of metrological characteristics, classification according to the latter, calibration, check of the main characteristics liable to vary with time.
NF T01-012:1973 Ph-measurement-standard solutions for calibration of ph-meters.
XP ISO/TS 20460:2016 Papiers et cartons - Essais en ligne automatisés - Comparabilité métrologique entre mesures normalisées et résultats de jauges en continu
XP Q03-210-2016 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
XP Q03-210*XP ISO/TS 20460:2016 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
NF C42-711:1989 Luminance meters. Determination of metrological characteristics, classification according to the latter, calibration, check of the main characteristics liable to vary with time.
NF EN 60360:2000 Méthode normalisée de mesure de l'échauffement d'un culot de lampe
NF C44-056-1-0*NF EN 62056-1-0:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0 : smart metering standardization framework
NF EN 62056-1-0:2015 Échange des données de comptage de l'électricité - La suite DLMS/COSEM - Partie 1-0 : cadre de normalisation du comptage intelligent
FD X07-013:1996 Metrology. Company metrology. Criteria of choice between verification and calibration, use and storage of the measurement results.
NF X06-045:1985 Application of statistics. Treatment of measurement results. Use of reference quantities in methods of measurement.
FD X07-021:1999 Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty
NF M60-512:1984 X AND GAMMA REFERENCE RADIATIONS FOR CALIBRATING DOSEMETERS AND DOSE RATEMETERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY.
NF X06-025*NF ISO 39511:2018 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

Professional Standard - Military and Civilian Products, Metrology testing standardization

WJ 2281-1995 Verification rules for flowmeters for testing chemical defense equipment
WJ/Z 215-1987 Standardized inspection methods for new product drawings and design documents

API - American Petroleum Institute, Metrology testing standardization

API MPMS 6.7-1991 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 7 - Metering Viscous Hydrocarbons
API MPMS 6.7-1981 MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 6 - METERING ASSEMBLIES SECTION 7 - METERING VISCOUS HYDROCARBONS (FIRST EDITION)
API MPMS 4.9.1-2005 Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers (First Edition)
API H00006-2001 Manual of Petroleum Measurement Standards - Draft Standard - Measurement of Crude Oil by Coriolis Meters
API MPMS 14.8-1997 Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluids Measurement Section 8—Liquefied Petroleum Gas Measurement (Second Edition)
API MPMS 5.3-2005 Manual of Petroleum Measurement Standards Chapter 5-Metering Section 3-Measurement of Liquid Hydrocarbons by Turbine Meters (Fifth Edition)
API MPMS 5.3-2000 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters (Fourth Edition)
API MPMS 5.3-1995 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters (Third Edition)
API MPMS 5.2-2005 Manual of Petroleum Measurement Standards Chapter 5-Metering Section 2-Measurement of Liquid Hydrocarbons by Displacement Meters (THIRD EDITION)
API MPMS 20.1-1993 Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement
API MPMS 9.2-2012 Manual of Petroleum Measurement Standards Chapter 9.2 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer- Measurement Coordination (Third Edition)
API MPMS 5.3-1987 Manual of Petroleum Measurement Standards Chapter 5—Liquid Metering Section 3—Measurement of Liquid Hydrocarbons by Turbine Meters (SECOND EDITION)
API MPMS 17.1-2008 Manual of Petroleum Measurement Standards Chapter 17—Marine Measurement Section 1—Guidelines for Marine Cargo Inspection (Fifth Edition)
API MPMS 5.2-1987 Manual of Petroleum Measurement Standards Chapter 5 - Liquid Metering Section 2 - Measurement of Liquid Hydrocarbons by Displacement Meters (Second Edition)
API MPMS 21.1-2013 Manual of Petroleum Measurement Standards Chapter 21.1 - Flow Measurement Using Electronic Metering Systems - Electronic Gas Measurement (Second Edition)
API MPMS 20.3-2013 Manual of Petroleum Measurement Standards Chapter 20.3 Measurement of Multiphase Flow (First Edition)
API MPMS 11.3.2.1-1974 Manual of Petroleum Measurement Standards Chapter 11.3.2.1 - Ethylene Density Measurement Manual
API MPMS 20.3 RUSSIAN-2013 Manual of Petroleum Measurement Standards Chapter 20.3 Measurement of Multiphase Flow (First Edition)
API MPMS 14.12-2017 Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluid Measurement Section 12-Measurement of Gas by Vortex Meters (FIRST EDITION)
API MPMS 5.7-2003 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 7 - Testing Protocol for Differential Pressure Flow Measurement Devices
API MPMS 3.5-1997 Manual of Petroleum Measurement Standards Chapter 3-Tank Gauging Section 5-Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging (FIRST EDITION)
API MPMS 6.2-2004 Manual of Petroleum Measurement Standards Chapter 6-Metering Assemblies - Section 2-Loading Rack Metering Systems (THIRD EDITION)
API MPMS 13.3-2016 Manual of Petroleum Measurement Standards Chapter 13.3 Measurement Uncertainty (FIRST EDITION)
API MPMS 13.3-2017 Manual of Petroleum Measurement Standards Chapter 13.3 Measurement Uncertainty (SECOND EDITION)
API MPMS 3.1A-2005 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products (Second Edition)
API MPMS 12.2-1981 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Liquid Petroleum Quantities Measured by Turbine or Displacement Meters
API MPMS 6.3-1994 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 3 - Service Station Metered Fuel - Dispensing Systems
API MPMS 3.1A-1994 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products (First Edition; Replaces STD 2545)
API MPMS 3.1B-2001 Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging (Second Edition)
API MPMS 17.8-1998 Manual of Petroleum Measurement Standards Chapter 17—Marine Measurement Section 8—Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks (First Edition)
API MPMS 5.8-2005 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology (First Edition)
API MPMS 7-2001 Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination (First Edition)

Danish Standards Foundation, Metrology testing standardization

Standardpakke Stikproeveplaner 3-2008 Standards package - Acceptance sampling plans - Inspection by variables
DS/IEC/TR 62055-21:2005 Electricity metering - Payment systems - Part 21: Framework for standardization
DS/EN ISO 7278-2:1996 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers
DS/ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
DS/EN 280+A2:2009 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
DS/EN 280:2013 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
DS/ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

German Institute for Standardization, Metrology testing standardization

DIN 24163-2:1985 Fans; performance testing, standardized test airways
DIN CEN/TR 17172:2023-02 Validation testing program on chloride penetration and carbonation standardized test methods; English version CEN/TR 17172:2022
DIN 24163-3:1985 Fans; performance testing of small fans using standardized test airways
DIN 53529-4:1991 Testing of rubber; curemetry; determination of vulcanization characteristics with the oscillating disc curemeter
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN EN 1808:2015-08 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests; German version EN 1808:2015
DIN EN 1808 Berichtigung 1:2017-06 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests; German version EN 1808:2015, Corrigendum to DIN EN 1808:2015-08
DIN CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods; German version CEN/TS 15674:2007
DIN EN ISO 7278-2:2023-03 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022); German version EN ISO 7278-2:2022

Military Standard of the People's Republic of China-General Armament Department, Metrology testing standardization

GJB 5224-2004 Wind tunnel measurement system design and calibration criteria
GJB 5109-2004 Equipment metrology support general requirements testing and calibration
GJB 2749A-2009 General requirement of establishment and conservation of measurement standard for military metrology
GJB/J 3410-1998 Calibration procedures for high-accuracy roundness and cylindricity measurement standard devices

Professional Standard - Traffic, Metrology testing standardization

JTS 258-2008 Standard for Quality Inspection of Port and Waterway Engineering Survey

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metrology testing standardization

GB/T 50493-2019 Petrochemical industry combustible gas and toxic gas detection alarm design standards
GB/T 8054-2008 Single sampling procedures and tables for inspection having desired operating characteristics by variables
GB/T 21446-2008 Measurement of natural gas flow by means of standard orifice meter
GB/T 9109.4-1988 Dynamic measurement of crude oil--The operating stipulations of verificating positive displacement meters by pipe prover
GBJ 131-1990 Quality inspection and evaluation of automatic apparatus installation
GB/T 17290-1998 Petroleum measurement systems--Calibration--Temperature corrections for use with volumetric reference measuring systems
GB/T 8053-2001 Single sampling procedures and tables for inspection having desired operating characteristics by variables for percent nonconforming
GB/T 8054-1995 Single sampling procedures and tables for inspection having desired operating characteristics by variables for mean value
GB/T 7918.2-1987 Standard methods of microbiological examination for cosmetics--Standard plate count
GB 7918.2-1987 Cosmetic microbiology standard test method for determination of total bacterial count
GB/T 139-1989 Standard method for using the ferrous sulfate(Fricke)dosimeter to measure absorbed dose in water
GB/T 139-2008 Standard method for using the ferrous sulfat(Fricke)dosimeter to measure absorbed dose in water

National Metrological Technical Specifications of the People's Republic of China, Metrology testing standardization

JJF(纺织) 034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester.Capacitance Method
JJF(纺织)034-2012 Calibration Specification for the Metrological Verification Standard of Textile Yarn Evenness Tester—Capacitance Method
JJF(纺织) 034-2006 Calibration specification for measurement verification standard of capacitive dryness meter
JJF 1261.12-2013 Rules of Metrology Testing for Energy Efficiency Label of Microcomputers
JJF 1261.6-2012 Rules of Metrology Testing for Energy Efficiency Label of Computer Monitors
JJF 1261.13-2014 Rules of Metrology Testing for Energy Efficiency Label of Copy Machines
JJF 1261.1-2010 Rules of Metrology Testing for Energy Efficiency Label of the Energy-using Products
JJF 1261.7-2013 Rules of Metrology Testing for Energy Efficiency Label of Flat Panel Televisions
JJF 1261.7-2014 Rules of Metrology Testing for Energy Efficiency Label of Flat Panel Televisions
JJF 1261.14-2014 Rules of Metrology Testing for Energy Efficiency Label of High-pressure Sodium Vapour Lamps
JJF(铁道) 602-2004 Uncertainty in Measurement for Special Measuring Standards of Railway
JJF 1261.3-2015 Rules of Metrology Testing for Energy Efficiency Label of Household Induction Cookers
JJF 1261.18-2015 Rules of Metrology Testing for Energy Efficiency Label of AC Contactors
JJF 1261.3-2010 Rules of Metrology Testing for Energy Efficiency Label of Househole Induction Cookers
JJF 1261.8-2013 Rules of Metrology Testing for Energy Efficiency Label of Electrical Washing Machines
JJF 1261.8-2014 Rules of Metrology Testing for Energy Efficiency Label of Electrical Washing Machines
JJF 1261.15-2014 Rules of Metrology Testing for Energy Efficiency Label of Household Refrigerators
JJF 1261.5-2012 Rules of Metrology Testing for Energy Efficiency Label of Automatic Electric Rice Cookers
JJF 1261.16-2015 Rules of Metrology Testing for Energy Efficiency Label of Electrical Storage Water Heaters
JJF 1261.2-2010 Rules of Metrology Testing for Energy Efficiency Label of Room Air Conditioners
JJF 1261.11-2013 Rules of Metrology Testing for Energy Efficiency Label of Domestic Solar Water Heating Systems
JJF 1028-1991 Standard Method for Using the Silver Dichromate Dosimeter to Measure γ-Ray Absorbed Dose in Water
JJF 1261.17-2015 Rules of Metrology Testing for Energy Efficiency Label of Copy Machines, Printers and Fax Machines
JJF 1261.10-2013 Rules of Metrology Testing for Energy Efficiency Label of Household and Similar Microwave Ovens
JJF 1017-1990 Standard Method for Using the Ceric-Cerous Sulfate Dosimeter to Measure γ-ray Absorted Dose in Water
JJF 1018-1990 Standard Method for Using the Potassium(silver)Dichromate Dosimeter to Measure γ-ray Absorbed Dose in Water

Professional Standard - Water Conservancy, Metrology testing standardization

SL 309-2013 Assessment criterion of metrology accreditation for quality testing institute of water resources
SL 309-2007 Assessment criterion of metrology accreditation for quality test institute of water resources
SL 309-2004 Assessment criterion of metrology accreditation for quality test institute of water resources

Professional Standard - Nuclear Industry, Metrology testing standardization

EJ 282-1986 Quality standard for inspection and maintenance of automatic instruments in uranium mining, metallurgy and chemical industry

Professional Standard - Electricity, Metrology testing standardization

DL/T 1665-2016 Specifications for on-site testing of digital electric energy metering devices

U.S. Military Regulations and Norms, Metrology testing standardization

ARMY MIL-HDBK-682 VALID NOTICE 1-2004 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT
ARMY MIL-HDBK-682-1991 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT

Professional Standard - Construction Industry, Metrology testing standardization

JGJ 153-2007 Standard for lighting design and test of sports venues
JGJ 153-2016 Stadium Lighting Design and Testing Standards
JGJ/T 454-2019 Intelligent building engineering quality inspection standard

IT-UNI, Metrology testing standardization

UNI 4726-1966
UNI 7828-1978
UNSIDER 14-1956
EC 1-2021 UNI EN 280-2021 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

Professional Standard - Urban Construction, Metrology testing standardization

CJ 26.24-1991 Municipal sewage water quality examination method standard chloride determination silver method
CJJ/T 164-2011 Standard for quality inspection of shield tunnel segment
CJ 26.6-1991 Municipal sewage water quality inspection method standard Determination of chemical oxygen demand Potassium dichromate method
CJ 26.10-1991 Determination of standard sulfide in urban sewage water quality inspection method
CJ 26.9-1991 Determination of Standard Cyanide in Municipal Sewage Water Quality Inspection Method
CJ 26.4-1991 Municipal sewage water quality inspection method standard Five-day determination of biochemical oxygen demand Dilution and inoculation method
CJ 26.1-1991 Municipal sewage water quality inspection method standard pH value determination potentiometer method

CN-QIYE, Metrology testing standardization

Q/GDW 1439-2014 Calibration specification for multi-functional electric measuring and testing device

SE-SIS, Metrology testing standardization

SIS 14-1992 Metrology and testing. List of Swedish standards
SIS SS 11 03 32-1982 Hardness test - Brinell test - Direct verification of standardizing machine for calibration of standardized blocks
SIS SS IEC 462:1983 Nuclear instrumentation - Standard test procedures for photomultiplier tubes for scintillation counting

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Metrology testing standardization

GB/T 34166-2017 Measumement of natural gas flow by means of standard nozzle meters

Professional Standard - Petroleum, Metrology testing standardization

SY/T 6143-2004 Measuring Natural Gas Flow with a Standard Orifice Flow Meter
SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility
SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices

Shanxi Provincial Standard of the People's Republic of China, Metrology testing standardization

DB14/T 2499-2022 Guidelines for the management and application of reference materials for chemical testing by inspection and testing institutions

British Standards Institution (BSI), Metrology testing standardization

BS 6001-1:1999 Sampling procedures for inspection by attributes - Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
PD CEN/TR 17172:2022 Tracked Changes. Validation testing program on chloride penetration and carbonation standardized test methods
BS 600:2000 A guide to the application of statistical methods to quality and standardization
BS EN ISO 7278-2:2022 Petroleum measurement systems - Pipe prover design, calibration and operation
BS ISO 7278-1:1996 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters - General principles
PD ISO/TR 23358:2022 Health informatics. A case study on establishing standardized measurement data in cardiac examination reports
BS IEC 62525:2007 Standard test interface language (STIL) for digital test vector data
BS DD CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
DD CEN/TS 15674:2007 Air quality — Measurement of stationary source emissions — Guidelines for the elaboration of standardised methods
BS EN 280:2001+A2:2009 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
BS EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

Aeronautical Radio Inc., Metrology testing standardization

ARINC 433 BOOK-2001 Standard Measurements for Flight Simulator Quality
ARINC 433-2001 Standard Measurements for Flight Simulator Quality

Liaoning Provincial Standard of the People's Republic of China, Metrology testing standardization

DB21/T 2968-2018 Standards for Quality Inspection and Evaluation of Expressway Greening Projects

Professional Standard - Chemical Industry, Metrology testing standardization

HG 20236-1993 Standards for Quality Inspection and Evaluation of Chemical Equipment Installation Engineering
HG 20236-1993（条文说明） Standards for Quality Inspection and Evaluation of Chemical Equipment Installation Engineering
HG/T 20707-2014 Inspection and evaluation standard for achievements quality of chemical industry geotechnical investigation

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Metrology testing standardization

ASHRAE 41.9-1988 Standard Calorimeter Test Method for Flow Measurement of a Volatile Refrigerant
ASHRAE 41.9-2018 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.10-2013 Standard Methods for Refrigerant Mass Flow Measurement Using Flowmeters

PL-PKN, Metrology testing standardization

PN M53201-1988 Measuring instruments Adjusting standards for external micrometers

ES-UNE, Metrology testing standardization

UNE 92315:2022 Measurement and quantification criteria for thermal insulation work of ducts.
UNE-CEN/TR 17172:2022 Validation testing program on chloride penetration and carbonation standardized test methods (Endorsed by Asociación Española de Normalización in August of 2022.)
UNE-EN 62056-1-0:2016 Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: Smart metering standardization framework
UNE-EN 1808:2016 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
UNE 92316:2016 Measurement and quantification criteria for thermal insulating works in cavity walls for buildings.

Hunan Provincial Standard of the People's Republic of China, Metrology testing standardization

DB43/T 1997-2021 Technical Specifications for Integral Error Detection of Digital Electric Energy Metering Devices

American National Standards Institute （ANSI), Metrology testing standardization

ANSI/ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/NFPA 720-2012 Standard for the Installation of Carbon Monoxide(CO) Detection and Warning Equipment
ANSI/ASHRAE 41.10-2013 Standard Methods for Volatile Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/IEEE 758:1979 CAMAC – Subroutines

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Metrology testing standardization

ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ASHRAE 41.10-2008 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Flowmeters
ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters

Shandong Provincial Standard of the People's Republic of China, Metrology testing standardization

DB37/T 5262-2023 Technical Standard for Quality Inspection of Underground Holes and Grooves
DB37/T 5166-2020 Intelligent building engineering quality inspection and acceptance standards
DB3703/T 036-2005 Technical Standards for Quality Inspection of Pollution-free Vegetable Products in Zibo City

Professional Standard - Ferrous Metallurgy, Metrology testing standardization

YB/T 9008-1998 Inspection - Acception Regulation and Quality Evaluation Standard of Engineering Survey
YB/T 9008-1998(条文说明) Inspection - Acception Regulation and Quality Evaluation Standard of Engineering Survey(EXPLANATION)
YB 9241-1992 Standards for quality inspection of metallurgical coking equipment installation engineering
YBJ 242-1992 Quality inspection and evaluation standards for metallurgical machinery and equipment installation engineering (coking equipment)

Japanese Industrial Standards Committee (JISC), Metrology testing standardization

JIS Z 9010:1979 Sequential sampling inspection plans for percent defectives having desired operating characteristics by variables (standard deviation known)
JIS Z 9010:1999 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

ETSI - European Telecommunications Standards Institute, Metrology testing standardization

TR 102 847-2010 User Group; Quality of ICT Services; Standardization and regulation references in the Metering and Billing area (V1.1.1)

RO-ASRO, Metrology testing standardization

STAS 9490-1987 Acoustics NORMALIZED FREQUENCIES FOR ACOUSTICAL MEASUREMENTS

Professional Standard - Navy, Metrology testing standardization

HJB 449.21-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 21:Raiophare checking platform
HJB 449.22-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 22:Raiophare receiver

Guangdong Provincial Standard of the People's Republic of China, Metrology testing standardization

DB44/T 2389-2022 Technical requirements for the digital processing system of metrological testing data and results

European Committee for Standardization (CEN), Metrology testing standardization

EN 13798:2002 Hydrometry - Specification for a reference raingauge pit
PD CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods

European Committee for Electrotechnical Standardization（CENELEC）, Metrology testing standardization

EN 62056-1-0:2015 Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: Smart metering standardization framework

KR-KS, Metrology testing standardization

KS C IEC 62056-1-0-2017 Electricity metering data exchange – The DLMS/COSEM suite – Part 1-0: Smart metering standardisation framework
KS A ISO 3951-5-2008 Sampling procedures for inspection by variables－Part 5：Sequential sampling plans indexed by acceptance quality limit(AQL) for inspection by variables(known standard deviation)
KS M ISO 5024-2003(2023)

American Association, Metrology testing standardization

ASSE 5000 SERIES-2004 Professional Qualifications Standard for Backflow Prevention Assembly Testers, Repairers and Surveyors

Institute of Electrical and Electronics Engineers (IEEE), Metrology testing standardization

IEEE/ANSI N42.12-1980 American National Standard Calibration and Usage of Sodium Iodide Detector Systems
ANSI Std N42.12-1980 American National Standard Calibration and Usage of Sodium Iodide Detector Systems
ANSI/IEEE Std 583-1982 IEEE Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)
NFPA (Fire) 720 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment, 2015 Edition
ANSI N322-1997 American National Standard Inspection, Test, Construction, and Performance Requirements for Direct Reading Electrostatic/Electroscope Type Dosimeters

Indonesia Standards, Metrology testing standardization

SNI ISO 7278-2:2011 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers
SNI ISO 7278-4:2011 Liquid hydrocarbons – Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers
SNI 03-6826-2002 Test method for normal consitency of portland cement by vicat apparatus for civil working

AENOR, Metrology testing standardization

UNE 51123:1986 STANDARD TEST METHOD FOR HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER

YU-JUS, Metrology testing standardization

JUS F.S3.011-1989 Standard method of test far wool content of raw wool. Laboratorv scale

IX-EU/EC, Metrology testing standardization

M 248-1997 STANDARDIZATION MANDATE TO CEN AND CENELEC FOR QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS
M 244-1996 MANDATE TO CEN AND CENELEC FOR THE ELABORATION AND ADOPTION OF STANDARDS FOR TEST METHODS AND FOR THE MEASUREMENT, CALCULATION AND DESIGNATION OF EFFICIENCY OF GENERAL PURPOSE LOW VOLTAGE THREE PHASE INDUCTION ELECTRIC MOTORS
M 360-2004 STANDARDISATION MANDATE TO CEN FOR STANDARD MEASURING METHODS FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY IN AMBIENT AIR AND THE TOTAL DEPOSITION OF MERCURY

International Electrotechnical Commission (IEC), Metrology testing standardization

IEC TR 62248:2002 Approaches to conformance and certification testing for design automation standards

Taiwan Provincial Standard of the People's Republic of China, Metrology testing standardization

CNS 6685-1980 Preparation, Marking and Measuring of Fabric Specimens in Tests for Determination of Dimensional Change

中华人民共和国国家卫生和计划生育委员会, Metrology testing standardization

GB 17022-1997 Criteria for quality assessment of field semi-quantitative test kit of salt iodine

WRC - Welding Research Council, Metrology testing standardization

BULLETIN 235-1978 IMPROVED REPEATABILITY IN ULTRASONIC EXAMINATION ; ULTRASONIC TESTING SYSTEM STANDARDIZATION REQUIREMENTS

AASHTO - American Association of State Highway and Transportation Officials, Metrology testing standardization

TP 78-2009 Standard Specification for Detecting the Presence of Phosphorous in Asphalt Binder

AWS - American Welding Society, Metrology testing standardization

A9.1-1992 Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases
A9.2-1992 Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases

Heilongjiang Provincial Standard of the People's Republic of China, Metrology testing standardization

DB23/T 3350-2022 Heilongjiang Provincial Construction Engineering Quality Inspection Organization On-site Inspection Technology Management Standard
DB23/T 3087-2022 Technical standards for design, construction and testing of ice-melting and snow-resistant asphalt pavement in cold regions

Professional Standard - Agriculture, Metrology testing standardization

NY/T 2243-2012 Construction standard of supervision of supervision and testing center for quality and safety of agri-products at provincial level
NY/T 2242-2012 Construction standard of supervision and testing center for quality and safety of agri-products of ministry of agriculture
NY/T 2244-2012 Construction standard of supervision and testing center for quality and safety of agri-products at municipal level
GB 139-1989 Standard Method for Measuring Absorbed Dose in Water Using a Ferrous Sulfate Dosimeter
第1．1．4章OIE陆生动物诊断试验和疫苗手册-第七版 General Standard - Introduction - Quality Management in Veterinary Testing Laboratories

The Aluminum Association, Metrology testing standardization

AA TP-2-1990 Standard Test Procedure for Measuring the Dissolution of Aluminum Hardeners

UY-UNIT, Metrology testing standardization

NORMA 54-P-1947

European Telecommunications Standards Institute (ETSI), Metrology testing standardization

ETSI TR 102 847-2010 User Group; Quality of ICT Services; Standardization and regulation references in the Metering and Billing area (V1.1.1)

BR-ABNT, Metrology testing standardization

ABNT MB-1339-1979

Professional Standard - Commodity Inspection, Metrology testing standardization

SN/T 0541.5-2009 Inspecting method of import and export standard rubber.Determination of nitrogen content
SN/T 0541.3-1996 Inspecting method for import and export standard rubber.Determination of ash content

International Telecommunication Union (ITU), Metrology testing standardization

ITU-T R.52-1988 STANDARDIZATION OF INTERNATIONAL TEXTS FOR THE MEASUREMENT OF THE MARGIN OF START - STOP EQUIPMENT

CZ-CSN, Metrology testing standardization

CSN 83 4741-1984 Air pollution prevention. Emission measurement of organic compounds. FID method for continuous measurement of the sum of hydrocarbons.

Professional Standard - Non-ferrous Metal, Metrology testing standardization

YSJ 007-1990 Standard for process design of laboratory,test cabinet and technical inspection station of non-ferrous metals mines

Jiangsu Provincial Standard of the People's Republic of China, Metrology testing standardization

DB32/T 4070-2021 Construction measurement standard of landscaping engineering in Jiangsu Province

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Metrology testing standardization

IEEE 758-1979 Standard Subroutines for Computer Automated Measurement and Control (CAMAC)

Lithuanian Standards Office , Metrology testing standardization

LST EN ISO 7278-2:2000 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers (ISO 7278-2:1988)
LST EN 280-2002+A2-2010 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
LST EN 280-2013 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

Professional Standard - Energy, Metrology testing standardization

DL/T 5618-2021 Distribution network digital survey design and handover data exchange standard

The American Road & Transportation Builders Association, Metrology testing standardization

AASHTO TP59-1999 Standard Test Methnod for Determining Air Content of Hardened Portland Cement Concrete by High Pressure Air Meter 2000 Edition

U.S. Air Force, Metrology testing standardization

AIR FORCE AFM 32-1094-2009 CRITERIA FOR AIR FORCE PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION

US-FCR, Metrology testing standardization

FCR AFM 32-1094-2009 CRITERIA FOR AIR FORCE PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION
FCR AF M32-1094-1998 CRITERIA FOR AIR FORCE PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION