ZH
RU
ES

pointy

pointy, Total:121 items.

In the international standard classification, pointy involves: Ground service and maintenance equipment, Cutting tools, Linear and angular measurements, Materials for aerospace construction, Metrology and measurement in general, Medical equipment, Fasteners, Farming and forestry, Hand-held tools, Mining equipment, Aircraft and space vehicles in general, Dentistry, Rails and railway components, MATERIALS HANDLING EQUIPMENT, Chipless working equipment, Woodworking equipment, Headgear. Clothing accessories. Fastening of clothing, Paints and varnishes.

Professional Standard - Aviation, pointy

• HB 3024-1989 Pointed hammer
• HB 3024-1977 pointed hammer

IN-BIS, pointy

• IS 5771-1981
• IS 6505-1971
• IS 3815-1969
• IS 9017-1979
• IS 9016-1979
• IS 13740-1993 Carbide tipped single point tools. Technical supply conditions
• IS 5772-1982
• IS 4569 Pt.2-1985
• IS 8610-1977
• IS 5855-1982
• IS 2758-1969
• IS 13742 Pt.1-1993 Carbide Tipped Single Point Tools - ISO Series Part 1 Straight Turning Tool (ISO 1) - Specification
• IS 13742 Pt.4-1993 Carbide Tipped Single Point Tools - ISO Series Part 4 Broad Turning Tool ( ISO 4 ) - Specification
• IS 13742 Pt.3-1993 Carbide Tipped Single Point Tools - ISO Series Part 3 Cranked Finishing Tool (ISO 3 ) - Specification

IT-UNI, pointy

• UNI 5670-1965 Pointed needle files.
• UNI 5674-1965 Reduced section machinist files. Pointed flat.
• UNI 6519-1969

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, pointy

• GB/T 6313-2018 Pointed-contact micrometer with conical tips
• GB/T 6313-2004 Pointed-contact micrometer with conical tips
• GB/T 6313-1986 Point micrometers
• GB/T 9211-1988 Arch pointed-nose hardmetal burrs
• GB/T 9215-1988 Conical pointed-nose hardmetal burrs
• GB/T 9217.11-2005 Hardmetal burrs--Part 11:Conical pointed-nose burrs(style M)
• GB/T 9217.7-2005 Hardmetal burrs--Part 7:Arch pointed-nose burrs(style G)

Military Standards (MIL-STD), pointy

• DOD A-A-51797-1987 TIP, PIPET
• DOD A-A-54956-1994 HOOK, SKIN (JOSEPH) SINGLE PRONG, (SHARP)
• DOD A-A-51798-1987 PIPET TIP, BLOOD AND PLASMA COAGULATION TIMER
• DOD A-A-51781 A-1989 HOOK, TISSUE, DOUBLE PRONG (JOSEPH) [Use In Lieu Of: DOD A-A-0051781]
• DOD A-A-51856 A-1988 SPONGE, SURGICAL, (NONWOVEN SYNTHETIC FIBER, SPEAR-SHAPED) [Use In Lieu Of: DOD A-A-0051856]

German Institute for Standardization, pointy

• DIN 20109:1990-06 Pickaxes, chisel and point ends
• DIN 607:2010-09 Cup head nib bolts
• DIN 604:2017-05 Flat countersunk head nib bolts
• DIN 8294:1977-11 Balance staffs for clocks; pointed staffs
• DIN 8294:1977 Balance staffs for clocks; pointed staffs
• DIN 188:2011 T-head bolts with double nib
• DIN 8033-9:1983-11 Hardmetal burrs; arch pointed nose burrs
• DIN ISO 16463:2015-08 Polycrystalline diamond inserts, tipped - Dimensions, types (ISO 16463:2014)
• DIN 20369:1989 Pick hammers; flat- and shearpick without and with shank
• DIN ISO 16462:2015-08 Cubic boron nitride inserts, tipped or solid - Dimensions, types (ISO 16462:2014)
• DIN ISO 11529-1:2007 Milling cutters - Designation - Part 1: Shank-type end mills of solid or tipped design (ISO 11529-1:2005)English version of DIN ISO 11529-1-2007-05
• DIN 607:1981 Cup head nib bolts
• DIN 604:1981 Flat countersunk nib bolts
• DIN 604:2010 Flat countersunk head nib bolts
• DIN 604:2017 Flat countersunk head nib bolts

TH-TISI, pointy

• TIS 581-1985 Standard for cross and straight peen hammers

PL-PKN, pointy

• PN M82408-1991 Countersunk flat nib bolts
• PN M82410-1991 Round head nib bolts

FI-SFS, pointy

• SFS B.5.67-1952
• SFS B.5.65-1952
• SFS B.5.61-1952
• SFS B.5.63-1952

HU-MSZT, pointy

• MSZ 12466-1952
• MSZ 613-1961
• MNOSZ 9284-1952
• MSZ 1429/4-1987
• MNOSZ 9282-1952
• MSZ 1465-1957
• MNOSZ 4086-1951
• MNOSZ 4085-1951
• MNOSZ 4087-1951

SE-SIS, pointy

• SIS 38 02 01
• SIS SS 3594-1988 Hardmetal burrs - Arch pointed-nose burrs - Style G
• SIS SS 3598-1988 Hardmetal burrs - Conical pointed-nose burrs - Style M

Korean Agency for Technology and Standards (KATS), pointy

• KS B 3631-2013 Pointed diamond dressing tools
• KS B 3453-2002 Pin punches
• KS B ISO 7755-11-2014(2019) Hardmetal burrs－Part 11：Conical pointed-nose burrs(style M)
• KS B ISO 11529-1:2012 Milling cutters - Designation - Part 1: Shank-type end mills of solid or tipped design
• KS B ISO 11529-1:2013 Milling cutters－Designation－Part 1：Shank type end mill of solid or tipped design
• KS M ISO 12137-2:2012 Paints and varnishes－Determination of mar resistance－Part 2：Method using a pointed stylus

Japanese Industrial Standards Committee (JISC), pointy

• JIS B 4137:1993 Pointed diamond dressing tools

Taiwan Provincial Standard of the People's Republic of China, pointy

• CNS 1190-1978 Half-round File for Carpenter, Thin Sharp End
• CNS 1188-1978 Flat File for Carpenter, Sharp Flat End
• CNS 1195-1978 Flat File for Smith, Sharp Flat End

AR-IRAM, pointy

• IRAM 5230-1961

Association Francaise de Normalisation, pointy

• NF EN 14810:2006 Sols sportifs - Détermination de la résistance aux pointes
• NF E71-211:1983 Taperpunches. Pin punches. Centre punches.
• NF ISO 12757-1:2018 Stylos à pointe bille et recharges - Partie 1 : Utilisation générale
• NF F05-004:1972 Fixed railway equipment. Expansion bolts with spikes for extra firm fixing.
• NF ISO 7755-11:2021 Fraises-limes en métaux-durs - Partie 11 : fraises-limes coniques à bout pointu (forme M)
• NF E66-650-11*NF ISO 7755-11:2021 Hardmetal burrs - Part 11 : conical pointed-nose burrs (style M)
• NF ISO 7755-7:2021 Fraises-limes en métaux-durs - Partie 7 : fraises-limes ogives à bout pointu (forme G)

Professional Standard - Military and Civilian Products, pointy

• WJ/Z 424.34-2000 Artillery General Parts Tool Pointed Flat File
• WJ 1224-1980 Optical instrument assembly general tool pointed scraper

国家质量监督检验检疫总局, pointy

• SN/T 4638-2016 Quarantine and identification method of spiral snail

NO-SN, pointy

• NS 1801-1-1964 Screw-drivers for recessed heads - Basic dimensions for point

Professional Standard - Light Industry, pointy

• QB/T 2212.8-1996 Construction tools (masonry) Point-nosed presser
• QB/T 2212.11-1996 Construction tools (masonry) Point-headed masonry spade
• QB/T 2212.3-1996 Construction tools (masonry) Point-nosed trowel

GM North America, pointy

• GM GMB220-1988 Points for Pointed Bolt and Screw Products
• GM B220-2011 Points for Pointed Bolt and Screw Products (Issue 2; Do Not Use on New Programs; No Replacement)
• GM C230-2011 Header Points for Screw Products (Issue 2; Do Not Use on New Programs; No Replacement)

Defense Logistics Agency, pointy

• DLA A-A-55469/5 VALID NOTICE 1-2001 CONNECTORS, ELECTRICAL, PLUGS, TIP, SINGLE, MINIATURE, TEST POINT PLUG, .080

Danish Standards Foundation, pointy

• DS/EN ISO 15606:2000 Dental handpieces - Air-powered scalers and scaler tips

Professional Standard - Machinery, pointy

• JB/T 54279-1999 Measuring tools, measuring instruments, product quality, graded pointed micrometers

British Standards Institution (BSI), pointy

• BS ISO 7755-11:2013 Hardmetal burrs. Conical pointed-nose burrs (style M)
• BS ISO 11529-1:1999 Milling cutters - Designation - Shank type end mills of solid or tipped design

RU-GOST R, pointy

• GOST 7785-1981 Countersunk nibbed head bolts, product grade C. Construction and dimensions
• GOST 7783-1981 Cup nibbed head bolts, product grade C. Construction and dimensions
• GOST 7801-1981 Increased cup nibbed head bolts, product grade C. Construction and dimensions
• GOST 11402-1975 Blacksmith's hand and hammer tools. Chamfered nose sledge hammers. Design and dimensions
• GOST R 52419-2005 Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications
• GOST R 52590-2006 Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements
• GOST R 52589-2006 Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

United States Navy, pointy

• NAVY MIL-STD-1320-5 VALID NOTICE 1-1988 TRUCKLOADING - BOMBS, GENERAL PURPOSE MK 81 AND MODS(250 LB), (WITH PLASTIC NOSE PLUGS) IN PALLET, BOMB MK 8 MOD 0 FLEET ISSUE UNIT LOAD
• NAVY MIL-STD-1320-5-1976 TRUCKLOADING - BOMBS, GENERAL PURPOSE MK 81 AND MODS(250 LB), (WITH PLASTIC NOSE PLUGS) IN PALLET, BOMB MK 8 MOD 0 FLEET ISSUE UNIT LOAD

U.S. Military Regulations and Norms, pointy

• ARMY QPL-684-18 NOTICE 2-2008 Cups, Bullet Jacket, Copper Alloy Clad Steel, for Small Arms Ammunition

RO-ASRO, pointy

• STAS 7546/5-1985 Locksmith's tools POINTS OF SCREWDRIVER BLADES FOR RECESSED HEAD SCREWS TYPE Z Dimensions

International Organization for Standardization (ISO), pointy

• ISO 7755-7:2013 Hardmetal burrs.Part 7: Arch pointed-nose burrs (style G)
• ISO 7755-11:2013 Hardmetal burrs.Part 11: Conical pointed-nose burrs (style M)
• ISO 7755-7:1984 Hardmetal burrs; Part 7: Arch pointed-nose burrs (style G)
• ISO 7755-11:1984 Hardmetal Burrs - Part 11: Conical Pointed-Nose Burrs (Style M) First Edition (Second Edition)
• ISO 11529-1:2005 Milling cutters - Designation - Part 1: Shank-type end mills of solid or tipped design

American Society for Testing and Materials (ASTM), pointy

• ASTM D7842/D7842M-12(2021) Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons
• ASTM D7842/D7842M-12(2016) Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons

CZ-CSN, pointy

• CSN 02 1810-1964 Hexagon head coach screw
• CSN 02 1324-1984 Flat countersunk nib bolts

BELST, pointy

• STB GOST R 50302-2003 Regrind-able super-hand material (composite) tipped cartridges for tool-holders. Specifications

ES-AENOR, pointy

• UNE 17 041

ESDU - Engineering Sciences Data Unit, pointy

• AERO B.S.02.03.08 A-1980 Forebody-afterbody interference wave drag of simple pointed or ducted body shapes with short midbodies.

Others:   pointy, Point tenon, pointed flat, pointed electrode, Pointed flat file, square point screw, pointed standard, pointed electrode, Pointed 鱥, pointed surgery, straight tip.