ZH
RU
ES
Spectral Brightness Coefficient
Spectral Brightness Coefficient, Total:96 items.
In the international standard classification, Spectral Brightness Coefficient involves: Optics and optical measurements, Electronic tubes, Optoelectronics. Laser equipment, Paper and board, Electronic display devices, Road engineering, Pulps, Geology. Meteorology. Hydrology, Wastes, Water quality, Software development and system documentation, Metrology and measurement in general, Applications of information technology, Fibre optic communications, Paints and varnishes, Space systems and operations, Plastics, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Optical equipment.
International Commission on Illumination (CIE), Spectral Brightness Coefficient
- CIE 76-1988 Intercomparison on Measurement of (Total) Spectral Radiance Factor of Luminescent Specimens (1st Edition) (Reprint 1990) (E)
- CIE 78-1988 Brightness Luminance Relations: Classified Bibliography (E)
- CIE 75-1988 Spectral Luminous Efficiency Functions Based Upon Brightness Matching for Monochromatic Point Sources 2 Degree and 10 Degree Fields (E)
- CIE 170-2-2015 Fundamental Chromaticity Diagram with Physiological Axes - Part 2: Spectral Luminous Efficiency Functions and Chromaticity Diagrams
Group Standards of the People's Republic of China, Spectral Brightness Coefficient
National Metrological Verification Regulations of the People's Republic of China, Spectral Brightness Coefficient
- JJG 2083-1990 Verification Scheme of Measuring Instruments for Spectral Radiance and Irradiance
- JJG 2083-2005 Spectral radiance, spectral irradiance measuring instrument verification system table
- JJG 383-2002 Verification Regulation of Spectral Radiance Standard Lamps
- JJG 2033-1989 Verification Scheme of Measuring Instruments for Luminance
RU-GOST R, Spectral Brightness Coefficient
- GOST 21815.3-1986 Image intensifier and image converter tubes. Method of measuring the luminance gain
- GOST 21815.16-1986 Image intensifier and image converter tubes. Method of measuring the output brightness non- uniformity ratio
- GOST R 57260-2016 Construction climatology. Parameters for daylighting calculations according to the distribution of brightness of the sky
- GOST R 8.665-2009 State system for ensuring the uniformity of measurements. Photo-electric luxmeter and brightness meter. Methods of verification
- GOST 8.197-2013 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance, spectral radiant power, spectral irradiance, spectral radiant intensity, power and radiant intensity in spectral range
National Metrological Technical Specifications of the People's Republic of China, Spectral Brightness Coefficient
- JJF 1754-2019 Calibration Specification for Deuterium Lamps Spectral Radiance(250 nm～400 nm)
- JJF 1321-1990 Operating Technical Norm of Primary Standard for Spectral Radiance and Irradiance in the Range of 250～2500 nm
- JJF 1322A-1990 Operating Technical Norm of Secondary Standard for Spectral Radiance in the Range of 250～2500 nm
Korean Agency for Technology and Standards (KATS), Spectral Brightness Coefficient
- KS M ISO 2470:2012 Paper, board and pulps－Measurement of diffuse blue reflectance factor(ISO brightness)
- KS M ISO 3688:2002 Pulps－Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor(ISO brightness)
- KS M ISO 3688:2017 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- KS M ISO 2470-1:2021 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions(ISO brightness)
- KS M ISO 2470-2006(2011) Paper, board and pulps－Measurement of diffuse blue reflectance factor(ISO brightness)
- KS M ISO 2470-2:2019 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions(D65 brightness)
International Organization for Standardization (ISO), Spectral Brightness Coefficient
- ISO 3688:1977 Pulps; Measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 2470:1977 Paper and board; Measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 2470:1999 Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 2470:1973 Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 3688:1999 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- ISO 18381:2013 Space data and information transfer systems - Lossless multispectral and hyperspectral image compression
- ISO/TR 18486:2016 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
ECIA - Electronic Components Industry Association, Spectral Brightness Coefficient
- TEB 24-1981 Effect of Pulse Shape in Raster Dot Alpha-Numeric CRT Presentations on Spot Luminance and Luminance Distribution
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectral Brightness Coefficient
- GB/T 9430-1988 Methods of test of luminance stability for fluorescent display tubes
- GB/T 21383-2008 Coefficient of initial retroreflected luminance of newly applied pavement marking and test method
- GB/T 7974-2013 Paper,board and pulps.Measurement of diffuse blue reflectance factor.D65 brightness(Diff/ Geometry, Outdoor daylight conditions)
Professional Standard - Traffic, Spectral Brightness Coefficient
- JT/T 691-2007 Test method for coefficient of retroreflected luminance of horizontal coatings
Association Francaise de Normalisation, Spectral Brightness Coefficient
- NF Q03-039-1*NF ISO 2470-1:2016 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1 : indoor daylight conditions (ISO brightness)
- NF Q03-039-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1 : indoor daylight conditions (ISO brightness).
- NF Q03-039-2*NF ISO 2470-2:2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 2 : outdoor daylight conditions (D65 brightness).
- NF S10-114*NF EN ISO 13697:2006 Optics and phonotics - Lasers and laser-related equipment - Test methods for specular reflectance and transmittance of optical laser components.
AENOR, Spectral Brightness Coefficient
- UNE-ISO 2470-1:2012 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
- UNE 57061:2002 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness).
Indonesia Standards, Spectral Brightness Coefficient
- SNI ISO 3688:2014 Pulps – Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
British Standards Institution (BSI), Spectral Brightness Coefficient
- BS ISO 2470:2000 Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness)
- BS ISO 2470-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Indoor daylight conditions (ISO brightness)
- 22/30439263 DC BS ISO 2469. Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor)
- BS ISO 2470-1:2016 Tracked Changes. Paper, board and pulps. Measurement of diffuse blue reflectance factor. Indoor daylight conditions (ISO brightness)
- BS ISO 3688:1999 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- BS ISO 3688:2000 Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- BS ISO 18381:2013 Space data and information transfer systems. Lossless multispectral and hyperspectral image compression
- BS PD CEN ISO/TR 18486:2017 Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
- 20/30391483 DC BS ISO 24121. Space data and information transfer systems. Spectral preprocessing transform for multispectral and hyperspectral image compression
- BS EN IEC 61280-1-3:2021 Fibre optic communication subsystem test procedures. General communication subsystems. Measurement of central wavelength, spectral width and additional spectral characteristics
Japanese Industrial Standards Committee (JISC), Spectral Brightness Coefficient
- JIS P 8148:2018 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Indoor daylight conditions (ISO brightness)
- JIS P 8148:2001 Paper, board and pulps -- Measurement of diffuse blue reflectance factor (ISO brightness)
国家市场监督管理总局、中国国家标准化管理委员会, Spectral Brightness Coefficient
- GB/T 40277-2021 Paper, board and pulps—Measurement of diffuse blue reflectance factor( ISO brightness)—Indoor daylight conditions
Standard Association of Australia （SAA）, Spectral Brightness Coefficient
- AS/NZS 1301.515:2017 Methods of test for pulp and paper, Method 515: Measurement of diffuse radiance factor (diffuse reflectance factor) — Indoor daylight conditions (ISO brightness)
- AS/NZS 1301.466s:2005 Methods of test for pulp and paper - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- AS/NZS 1301.446s:2005 Methods of test for pulp and paper - Measurement of diffuse blue reflectance factor (brightness) of pulp, paper and paperboard
- AS/NZS 1301.462s:2005 Methods of test for pulp and paper - Measurement of diffuse blue reflectance factor (ISO brightness) of pulp, paper and paperboard
NZ-SNZ, Spectral Brightness Coefficient
- AS/NZS 1301.520:2016 Methods of test for pulp and paper Part 520: Measurement of diffuse radiance factor (diffuse reflectance factor)-Outdoor daylight conditions (D65 brightness)
Professional Standard - Ocean, Spectral Brightness Coefficient
- HY/T 133-2010 Determination of spectral absorption coefficient of particles and dissolved material for seawater-Spectrophotometry
KR-KS, Spectral Brightness Coefficient
- KS M ISO 2470-1-2021 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions(ISO brightness)
- KS M ISO 2470-1-2016 Paper, board and pulps－Measurement of diffuse blue reflectance factor－Part 1：Indoor daylight conditions(ISO brightness)
- KS M ISO 2470-2-2019 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions(D65 brightness)
- KS M ISO 3688-2017 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
未注明发布机构, Spectral Brightness Coefficient
- BS ISO 2470-2:2008(2009) Paper, board and pulps — Measurement of diffuse blue reflectance factor Part 2 : Outdoor daylight conditions (D65 brightness)
VN-TCVN, Spectral Brightness Coefficient
- TCVN 6729-2008 Pulps.Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
- TCVN 1865-1-2010 Paper,board and pulps.Measurement of diffuse blue reflectance factor.Part1:Indoor daylight conditions(ISO brightness)
- TCVN 1865-2-2010 Paper,board and pulps.Measurement of diffuse blue reflectance factor.Part2:outdoor daylight conditions(D65 brightness)
Military Standard of the People's Republic of China-General Armament Department, Spectral Brightness Coefficient
- GJB 452.2-1988 Optical camouflage performance of camouflage clothing and its inspection method Measurement method of camouflage clothing and background visible light and near infrared brightness coefficient
Institute of Electrical and Electronics Engineers (IEEE), Spectral Brightness Coefficient
American Society for Testing and Materials (ASTM), Spectral Brightness Coefficient
- ASTM E2152-12(2023) Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
- ASTM E3029-15(2023) Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers
- ASTM E2153-01(2006) Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
- ASTM E2153-01 Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
- ASTM E2153-01(2017) Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
- ASTM E2153-01(2023) Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
- ASTM E2152-12 Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
- ASTM E2152-12(2017) Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
- ASTM E2832-12(2017) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
American National Standards Institute （ANSI), Spectral Brightness Coefficient
- ANSI/TIA/EIA 455-50B-1998 Light Launch Conditions for Long Length Graded-Index Optical Fiber Spectral Attenuation Measurements
Professional Standard - Electron, Spectral Brightness Coefficient
- SJ/Z 1122-1976 Preferred series and types of fluorescent display tubes
Professional Standard - Machinery, Spectral Brightness Coefficient
NL-NEN, Spectral Brightness Coefficient
- NEN 6306-1990 Vegetable and animal oils and fats Determination of extinction co?ffici?nt in the ultraviolet spectre
ZA-SANS, Spectral Brightness Coefficient
- SANS 6261:2008 Paints and varnishes - Determination of coefficient of retro-reflected luminance by means of a portable retro-reflectometer
European Committee for Standardization (CEN), Spectral Brightness Coefficient
- EN ISO/TR 18486:2017 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
CEN - European Committee for Standardization, Spectral Brightness Coefficient
- CEN ISO/TR 18486:2018 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
- CEN ISO/TR 18486:2017 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
German Institute for Standardization, Spectral Brightness Coefficient
- DIN CEN ISO/TR 18486:2020-07 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2018); German version CEN ISO/TR 18486:2018
- DIN 58141-2:1989 Testing of fibre optic elements; determination of spectral transmittance of light guides
ES-UNE, Spectral Brightness Coefficient
- UNE-CEN ISO/TR 18486:2018 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2018) (Endorsed by Asociación Española de Normalización in March of 2019.)
RO-ASRO, Spectral Brightness Coefficient
- STAS SR ISO 10260:1996 Water quality - Measurement of biochemical parameters -Spectrometric determination of the chlorophylle - a concentration
中国气象局, Spectral Brightness Coefficient
- QX/T 368-2016 Solar constant and solar spectral irradiance at zero atmospheric mass