impact test

impact test, Total:186 items.

In the international standard classification, impact test involves: Testing of metals, Electrical accessories, Vibrations, shock and vibration measurements, Elements of buildings, Electronic components in general, Cases. Boxes. Crates, Welding, brazing and soldering, Analytical chemistry, Vibration and shock with respect to human beings, Road vehicle systems, Construction materials, Vocabularies, Sports equipment and facilities, Mechanical testing, Freight distribution of goods, Wood-based panels, Aerospace fluid systems and components, Paints and varnishes, Construction equipment, Packaging and distribution of goods in general, Road engineering, Packaging materials and accessories, Plastics, Footwear, Iron and steel products, Diagnostic, maintenance and test equipment, Environmental testing, Road vehicles in general, Protection of and in buildings, Surface treatment and coating, Electromechanical components for electronic and telecommunications equipment, Gas and steam turbines. Steam engines.

CU-NC, impact test

NC 04-12-1967 Beam impact test for steel
NC 97-52-1984 Packaging Free Fall Vertical Shock. Testing Method

SE-SIS, impact test

SIS 11 01 51-1973 Sampling for impact testing
SIS 11 01 50-1974 Sampling for impact testing
SIS 84 02 13-1972 Impact test of transport packages
SIS SS-ISO 8568:1990 Vibration andshock — Mechanical vibration andshock — Shock-testing machines — Characteristics and performance
SIS SEN 43 16 05-1971 Environmental testing, tmpact test. Test E
SIS SS IEC 817:1989 Spring-operated impact-test apparatus andits calibration

Indonesia Standards, impact test

SNI 07-0354-1989 Impact test rod for metal
SNI 19-4781-1998 Test method for inchie impact test for shipping containers

Institute of Environmental Sciences and Technology, impact test

IEST RP-DTE032.2-2009 PYROSHOCK TESTING TECHNIQUES

Korean Agency for Technology and Standards (KATS), impact test

KS B 0809-2001 Test pieces for impact test for metallic materials
KS B 0810-2003 Method of impact test for metallic materials
KS B ISO 8568:2013 Mechanical shock-Testing machines-Characteristics and performance
KS F 2236-1999 Doorsets－Soft heavy body impact test
KS F 2221-2009 Test method of impact for building boards
KS B 0821-2007 Methods of tension and impact tests for deposited metal
KS B 0821-1982 Methods of tension and impact tests for deposited metal
KS F 2581-2008 Testing Method for determination of aggregates impactingMethod of test for production control of aggregate
KS F 2581-2013 Standard test method for determination of aggregates impacting value ? Method of test for production control of aggregate
KS W ISO 6773:2020 Aerospace — Fluid systems — Thermal shock testing of piping and fittings
KS F 2582-2008 Testing method for resistance to thermal shock of coarse aggregates for hot mix asphalt pavement
KS F 2582-2013 Standard test method for resistance to thermal shock of coarse aggregates for hot mix asphalt pavement
KS R 1155-2012 Backrest impact absorption tes method
KS T 1332-2012(2017) Mechanical-shock fragility testing methods of products for packaging design
KS R 1151-2012 Sun-visor impact absorption test method

Association Francaise de Normalisation, impact test

NF D14-502:2019 Appareils sanitaires - Essai de résistance aux chocs
NF EN 596:1995 Structures en bois - Méthodes d'essai - Essai de choc de corps mou sur murs à ossature en bois.
NF H00-059:1990 Emballages - Emballages d'expédition complets et pleins - Essai d'impact localisé.
NF EN 60512-7-2:2012 Connecteurs pour équipements électroniques - Essais et mesures - Partie 7-2 : essais d'impact (fiches)- Essai 7b : résistance mécanique aux chocs
NF EN 60512-10-4:2004 Connecteurs pour équipements électroniques - Essais et mesures - Partie 10-4 : essais d'impact (composants libres), essais d'impact sous charge statique (composants fixes), essais d'endurance et essais de surcharge - Essai 10d : surcharge électri...
NF H00-082:2017 Emballages - Emballages d'expédition complets et pleins - Essai de choc horizontal programmé
NF EN 12132-2:1998 Plumes et duvets - Méthodes d'essai des tissus pour l'étanchéité aux plumes et duvets - Partie 2 : essai par impact.
NF EN ISO 2244:2003 Emballages - Emballages d'expédition complets et pleins et charges unitaires - Essais de choc horizontal
NF EN 22248:1993 Emballages - Emballages d'expédition complets et pleins - Essai de choc vertical par chute libre.
NF T30-905-1:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1 : multi-impact testing.
NF EN 60512-7-1:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 7-1 : essais d'impact (fiches) - Essai 7a : chute libre (essai répété)
NF EN ISO 7459:2004 Récipients en verre - Résistance au choc thermique et endurance au choc thermique - Méthodes d'essai
NF EN 14149:2004 Emballages - Emballages d'expédition et charges unitaires complets et pleins - Essai de choc par chute par basculement
P08-302:1990 External walls of buildings. Impact resistance. Test methods and criteria.
NF EN ISO 15874-1/A1:2022 Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 1 : Généralités - Amendement 1 : Essai de choc

RO-ASRO, impact test

STAS 11053/14-1985 Testing devices for electrical purposes IMPACT TEST APPARATUS
STAS 6833-1979 Testing of metals NOTCH IMPACT TEST AT LOW TEMPERATURES
STAS 6774-1979 Testing of metals IMPACT STRENGTH TEST AFTER ARTIFICIAL AGEING
STAS 8393/16-1990 Environmental testing procedures shocks test test method ea and guidance
STAS 5540/4-1986 TESTS OF BUTT WELOED .IOINTS Notch impact test
STAS 5118/7-1971 Transport packages DETEUMINATION OK THE P.ESISTANCE TO IMPACT ON 1NCLINED PLANE
STAS 12743/5-1989 Electromechanical components for electronic equipment BASIC TESTING PROCEDURES AND MEASURING METHODS Impact tests, static load tests, endu- rance tests and overload tests

TIA - Telecommunications Industry Association, impact test

EIA/TIA-455-14A-1992 FOTP-14 Fiber Optic Shock Tests (Specified Pulse)
TIA/EIA-455-2C-1998 FOTP-2 Impact Test Measurements for Fiber Optic Devices
TIA-455-2B-1990 FOTP-2 Impact Test Measurements for Fiber Optic Devices

CZ-CSN, impact test

CSN 67 3082-1983 Testing of impact resistance of paint coattngs
CSN 26 9312-1986 Plastic crates. Horizontal impact test: inclined plane test
CSN ISO 718:1993 Laboratory glassware - Thermal shock and thermal shock endurance - Test methods
CSN ISO 7459:1992 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods
CSN ISO 4532:1992 Vitreous and porcelain enamels. Determination of the resistance of enamelled articles to impact. Pistol test
CSN 05 1160-1985 Impact bending test on welded joints of plastics

PL-PKN, impact test

PN H04962-1987 Sintered metal materials Impact test
PN H04372-1974 Impact test for metals at elevated temperatures
PN E04070-13-1986 Power transformers Test methods Lightning impulse test
PN E04164-05-1986 Enamelled winding round wires Methods of testing Heat shock test

GB-REG, impact test

REG NASA-LLIS-0780-2000 Lessons Learned - Pyrotechnic Shock Testing

Society of Automotive Engineers (SAE), impact test

SAE TS325-1-1985 TS325 Test for Electrical Connectors Thermal Shock
SAE TS329-2-1987 TS329 Test for Electrical Connectors Physical Shock
SAE J984-1967 BODY FORMS FOR LABORATORY IMPACT TESTING
SAE MA2004-1981 THERMAL SHOCK TESTING OF FLUID SYSTEM PIPING AND FITTINGS
SAE J346-1968 SEATBACK ASSEMBLY LABORATORY IMPACT TEST PROCEDURE-HEAD AREA
SAE TS348-1-1987 TS348 Test for Electrical Connectors Thermal Shock (for Hermetically Sealed Connectors)
SAE J211-2-2001 Instrumentation for Impact Test Part 2 Photographic instrumentation

American National Standards Institute （ANSI), impact test

ANSI/EIA 364-42C:2012 Impact Test Procedure for Electrical Connectors
ANSI/ASTM F2650:2013 TERMINOLOGY RELATING TO IMPACT TESTING OF SPORTS SURFACES AND EQUIPMENT

British Standards Institution (BSI), impact test

BS ISO 8568:2008 Mechanical shock. Testing machines. Characteristics and performance
BS ISO 8568:2007 Mechanical shock. Testing machines. Characteristics and performance
PAS 170-1:2017 Vehicle security barriers. Low speed impact testing. Trolley impact test method for bollards
BS ISO 7141:2022 Road vehicles. Light alloy wheels. Lateral impact test
BS 2M 53:1997 Aircraft. Fluid systems. Thermal shock testing of piping and fittings
BS ISO 3984:2004 Road vehicles. Rear moving barrier impact test procedure
BS EN ISO 20567-1:2017 Paints and varnishes. Determination of stone-chip resistance of coatings. Multi-impact testing
21/30424260 DC BS ISO 7141. Road vehicles. Light alloy wheels. Lateral impact test
BS EN ISO 20567-1:2005 Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing
PD ISO/TS 13499:2019 Road vehicles. Multimedia data exchange format for impact tests
20/30420690 DC BS EN ISO 9016. Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
BS EN ISO 9016:2022 Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
BS EN ISO 20567-2:2023 Paints and varnishes. Determination of stone-chip resistance of coatings. Single-impact test with a guided impact body
ISO 6603-2:2023 Plastics. Determination of puncture impact behaviour of rigid plastics. - Part 2: Instrumented impact testing
BS ISO 10227:1996 Human/human surrogate impact (single shock) testing and evaluation. Guidance on technical aspects
18/30377401 DC BS EN ISO 179-2. Plastics. Determination of Charpy impact properties. Part 2. Instrumented impact test
BS ISO 10227:1996(1998) Human / human surrogate impact (single shock) testing and evaluation — Guidance on technical aspects
BS ISO 20567-4:2023 Paints and varnishes. Determination of stone-chip resistance of coatings - Mobile multi-impact testing on a small testing area
BS EN ISO 20567-4:2024 Paints and varnishes. Determination of stone-chip resistance of coatings - Mobile multi-impact testing on a small testing area
22/30447422 DC BS EN 13049. Windows. Soft and heavy body impact. Test method, safety requirements and classification
BS EN 13049:2023 Windows and doors. Soft and heavy body impact. Test method, safety requirements and classification
22/30430494 DC BS EN ISO 6603-2. Plastics. Determination of puncture impact behaviour of rigid plastics. Part 2. Instrumented impact testing
20/30425707 DC BS EN 60076-4. Power transformers. Part 4. Guide to the lightning impulse and switching impulse testing. Power transformers and reactors
BS EN ISO 148-1:2016 Metallic materials. Charpy pendulum impact test. Test method
BS EN ISO 148-2:2016 Metallic materials. Charpy pendulum impact test. Verification of testing machines
PD ISO/TS 24667:2020 Sports and recreational facilities. Impact surfacing testing device
BS ISO 24667:2022 Sports and recreational facilities. Impact surfacing testing device
BS EN 60255-21-2:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Shock and bump tests
22/30450173 DC BS ISO 20567-4. Paints and varnishes. Determination of stone-chip resistance of coatings. Part 4. Mobile multi-impact testing on a small testing area
21/30438697 DC BS ISO 24667. Sports and recreational facilities. Impact surfacing testing device

Professional Standard - Electron, impact test

SJ 20136-1992 Shock measurement and data processing methods for military electronic equipments

International Organization for Standardization (ISO), impact test

ISO 8568:2007 Mechanical shock - Testing machines - Characteristics and performance
ISO 22343-1:2023 Security and resilience — Vehicle security barriers — Part 1: Performance requirement, vehicle impact test method and performance rating

SAE - SAE International, impact test

SAE J984-1992 BODYFORMS FOR USE IN MOTOR VEHICLE PASSANGER COMPARTMENT IMPACT DEVELOPMENT

NATO - North Atlantic Treaty Organization, impact test

STANAG 4496-2019 IMPACT D'?CLATS@ PROC?DURES D'ESSAI DES MUNITIONS (ED 2)

ECIA - Electronic Components Industry Association, impact test

364-32B-1992 TP-32B Thermal Shock Test Procedure for Electrical Connectors

U.S. Air Force, impact test

AIR FORCE MIL-T-6053 C NOTICE 2-1997 TESTS, IMPACT, SHOCK ABSORBER LANDING GEAR, AIRCRAFT
AIR FORCE MIL-T-6053 C (1)-1984 TESTS, IMPACT, SHOCK ABSORBER LANDING GEAR, AIRCRAFT
AIR FORCE MIL-T-6053 C-1977 TESTS, IMPACT, SHOCK ABSORBER LANDING GEAR, AIRCRAFT

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, impact test

IPC/JEDEC-9703-2009 Mechanical Shock Test Guidelines for Solder Joint Reliability

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, impact test

GB/T 36038-2018 Human/human surrogate impact (single shock) testing and evaluation—Guidance on technical aspects

PT-IPQ, impact test

NP 3157-1988 Methods of testing doors Soft and heavy body impact test on door leaves
NP 2335-1988 Methods of testing doors Hard body impact test on door leaves

未注明发布机构, impact test

DIN 53435 E:2018-02 Testing of plastics - Bending test and impact test on dynstat test specimens
DIN EN 61721:2000 Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impact test)
DIN EN ISO 9016 E:2010-08 Destructive testing of welding of metallic materials, impact test specimen positioning, notch orientation and inspection (draft)

German Institute for Standardization, impact test

DIN 53435:2018-09 Testing of plastics - Bending test and impact test on dynstat test specimens
DIN 55441-2:1998-05 Packaging test - Impact test - Part 2: Free drop of plastic bottles
DIN 52295:2010-03 Testing of glass - Pendulum impact test on containers - Testing by attributes and by variables
DIN EN 60512-10-4:2004-06 Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests and overload tests - endurance tests and overload tests - Test 10d: Electrical overload (connectors) (IEC 60512-10-4:2003); Germ...
DIN ISO 6773:1996-01 Aerospace - Fluid systems - Thermal shock testing of piping and fittings (ISO 6773:1994)
DIN EN ISO 2244:2002-12 Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000); German version EN ISO 2244:2002
DIN EN 14149:2003-11 Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop; German version EN 14149:2003
DIN EN ISO 9016:2011 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2001); German version EN ISO 9016:2011
DIN EN ISO 20567-1:2017-07 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017); German version EN ISO 20567-1:2017
DIN EN ISO 6272-2:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN ISO 6272-1:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 9016:2012 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO/FDIS 9016:2012); German version FprEN ISO 9016:2012
DIN EN ISO 7459:2004-05 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO 7459:2004); German version EN ISO 7459:2004
DIN EN 12132-2:2003-11 Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test (includes Amendment A1:2003); German version EN 12132-2:1998 + A1:2003
DIN EN ISO 20567-2:2017-07 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017); German version EN ISO 20567-2:2017 / Note: To be replaced by DIN EN ISO 20567-2 (2022-12).

American Society for Testing and Materials (ASTM), impact test

ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D6643-01(2011) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
ASTM F2650-07 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment
ASTM E23-07a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E23-07 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E23-07ae1 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM D6537-00(2014) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
ASTM F1976-06 Standard Test Method for Impact Attenuation Properties of Athletic Shoes Using an Impact Test
ASTM D3332-99(2004) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D3332-99 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM F1976-99 Standard Test Method for Cushioning Properties of Athletic Shoes Using an Impact Test

CENELEC - European Committee for Electrotechnical Standardization, impact test

EN 61721:1999 Susceptibility of a Photovoltaic (PV) Module to Accidental Impact Damage (Resistance to Impact Test)

YU-JUS, impact test

JUS N.A5.041-1987 Verification mechanical strength resistance ageinst impact. Impact-test apparatus

American Society of Mechanical Engineers (ASME), impact test

ASME STP-PT-028-2009 IMPACT TESTING EXEMPTION CURVES FOR LOW TEMPERATURE OPERATION OF PRESSURE PIPING
ASME 2209-2001 Impact Tests per Paragraph UHA-51 for Glass Lined 316L Stainless Steel Vessels Section VIII, Division 1 ANNULLED

ES-UNE, impact test

UNE-ISO 3984:2016 Road vehicles. Rear moving barrier impact test procedure
UNE-EN 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (Endorsed by AENOR in April of 2012.)
UNE-EN ISO 20567-2:2017 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017)
UNE-EN ISO 20567-2:2024 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023)
UNE-EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) (Endorsed by AENOR in September of 2010.)

CEN - European Committee for Standardization, impact test

EN ISO 9016:2022 Destructive tests on welds in metallic materials - Impact tests - Test specimen location@ notch orientation and examination
EN ISO 9016:2011 Destructive tests on welds in metallic materials - Impact tests - Test specimen location@ notch orientation and examination

Standard Association of Australia （SAA）, impact test

AS 4155.10:1993 Test methods for general access floors - Test for dynamic soft body impact
AS ISO 24667:2023 Sports and recreational facilities — Impact surfacing testing device
AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)

The American Road & Transportation Builders Association, impact test

AASHTO T 243M/T 243-2008 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel

Japanese Industrial Standards Committee (JISC), impact test

JIS A 8101:1998 Vibration and shock testing methods for construction machinery gauges
JIS H 8451:2008 Testing methods for thermal cycle and thermal shock resistance of thermal barrier coatings

KR-KS, impact test

KS W ISO 6773-2020 Aerospace — Fluid systems — Thermal shock testing of piping and fittings

European Committee for Standardization (CEN), impact test

EN ISO 9016:2012 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
EN ISO 6603-2:2023 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing (ISO 6603-2:2023)
EN ISO 20567-2:2023 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2023)
EN ISO 20567-4:2024 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 4: Mobile multi-impact testing on a small testing area (ISO 20567-4:2023)

(U.S.) Ford Automotive Standards, impact test

FORD FLTM BO 117-02-2001 IMPACT TEST FOR PLASTICS Replaces FLTM BO 017-02 [Replaced: FORD FLTM BO 017-02]

Group Standards of the People's Republic of China, impact test

T/ZSHG 016-2023 Test method for aerosol impact resistance test

Acoustical Society of America (ASA), impact test

ASA S2.62-2009 American National Standard Shock Test Requirements for Equipment in a Rugged Shock Environment (Includes Access to Additional Content)

IN-BIS, impact test

IS 10236 Pt.12-1985 Basic climatic and durability testing procedures for optical instruments Part 12 Impact testing
IS 10236 Pt.10-1985 Basic climatic and durability testing procedures for optical instruments Part 10 Impact testing
IS 9000 Pt.7/Sec.6-1988 Basic Environmental Testing Procedures for Electronic and Electrical Products Part 7 Impact Testing Section 6: Test Ee: Bounce
IS 9000 Pt.7/Sec.4-1979 Basic Environmental Testing Procedures for Electronic and Electrical Products Part 7 Impact Testing Section 6: Test Ee: Bounce
IS 7028 Pt.3-1987 Performance Testing of Complete, Filled Transport Packages Part 3 Horizontal Impact Test (Horizontal or Inclined Test; Pendulum Test)

Association of German Mechanical Engineers, impact test

DVS 2203-3-2010 Testing of welded joints on panels and pipes made of thermoplastic materials - Tensile impact test
DVS 2203-3-2011 Testing of welded joints between panels and pipes made of thermoplastics - Tensile impact test

AENOR, impact test

UNE-EN 12132-2:1999 FEATHER AND DOWN - METHODS FOR TESTING THE DOWN PROOF PROPERTIES OF FABRICS - PART 2: IMPACT TEST
UNE-EN 60068-2-53:2011 Environmental testing -- Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

IPC - Association Connecting Electronics Industries, impact test

IPC/JEDEC-9703 CD-2009 Mechanical Shock Test Guidelines for Solder Joint Reliability (Incorporates Amendment 1: January 2007)

Lithuanian Standards Office , impact test

LST EN ISO 2244:2002 Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000)
LST EN 60512-7-1-2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) (IEC 60512-7-1:2010)
LST EN 60068-2-53-2010 Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests (IEC 60068-2-53:2010)

European Association of Aerospace Industries, impact test

AECMA PREN 2003-3-1998 Aerospace Series Steel Test Methods Part 3: Calibration of Pendulum Impact Machines Edition P 1

Danish Standards Foundation, impact test

DS/EN 60068-2-53:2010 Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

North Atlantic Treaty Organization Standards Agency, impact test

STANAG 4241-2003 BULLET IMPACT, MUNITION TEST PROCEDURES
STANAG 4496-2006 FRAGMENT IMPACT, MUNITIONS TEST PROCEDURE

TR-TSE, impact test

TS 3466-1980 FLEXIBLE CELLULAR MATERIALS - TEST FOR DYNAMIC FATIGUE BY CONSTANT LOAD POUNDING