ZH
RU
ES

How to check and accept measuring equipment

How to check and accept measuring equipment, Total:154 items.

In the international standard classification, How to check and accept measuring equipment involves: Linear and angular measurements, Installations in buildings, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Vibrations, shock and vibration measurements, Acoustics and acoustic measurements, Fibre optic communications, Measurement of force, weight and pressure, Diagnostic, maintenance and test equipment, Tyres, Electronic components in general, Audio, video and audiovisual engineering, Electrical and electronic testing, Medical equipment.

Association of German Mechanical Engineers, How to check and accept measuring equipment

VDI/VDE/DGQ 2618 Blatt 1.2-2003 Inspection of measuring and test equipment - Instructions for the inspection of measuring and test equipment for geometrical quantities - Uncertainty of measurement
VDI/VDE/DGQ 2618 Blatt 1.1-2001 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Basic principals
VDI/VDE/DGQ 2618 Blatt 10.4-2008 Inspection of measuring and test equipment - Instructions to inspect measuring and test equipment for geometrical quantities - Test instruction for micrometer heads

Association Francaise de Normalisation, How to check and accept measuring equipment

NF E11-150-4:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4 : CMMs used in scanning measuring mode.
NF E11-096:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of depth gauges
NF E11-095:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of micrometers for external measurements
NF E11-056:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge
FD E10-201-6*FD ISO/TR 14253-6:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6 : generalized decision rules for the acceptance and rejection of instruments and workpieces
NF E11-056:2016 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of digital dial gauge with plunger
NF E11-091:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of callipers
NF E11-098-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
NF E11-150-3*NF EN ISO 10360-3:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3 : CMMs with the axis of a rotary table as the fourth axis.
NF E10-201-2*NF EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2 : guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
NF E11-150-7*NF EN ISO 10360-7:2011 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 : CMMs equipped with imaging probing systems
NF EN ISO 14253-2:2011 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 2 : lignes directrices pour l'estimation de l'incertitude dans les mesures GPS, dans l'étalonnage des équipements de m...
NF EN ISO 10360-7:2011 Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 7 : MMT équipées de systèmes de palpage imageurs
NF EN ISO 14253-5:2015 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 5 : incertitude liée aux essais de vérification des appareils de mesure indicateurs
NF E11-054*NF EN ISO 9493:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment : dial test indicators (lever type) - Design and metrological characteristics
NF E10-201-5*NF EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments
NF E10-201-1*NF EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1 : Decision rules for verifying conformity or nonconformity with specifications
NF E10-201-1:2013 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: decision rules for proving conformity or nonconformity with specifications
NF R63-302*NF EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation/deflation of tyres for motor vehicles - Metrology, requirements and testing
NF EN 15657:2017 Propriétés acoustiques des éléments de construction et des bâtiments - Mesurage en laboratoire des bruits structuraux des équipements de bâtiment pour toute condition d'installation
XP E10-201-4*XP CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4 : Background on functional limits and specification limits in decision rules
NF EN ISO 14253-1:2017 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et des équipements de mesure - Partie 1 : règles de décision pour contrôler la conformité ou la non-conformité à la spécification
XP CEN ISO/TS 14253-4:2010 Spécification géométrique des produits (GPS) - Vérification par la mesure des pièces et équipements de mesure - Partie 4 : informations de base sur les limites fonctionnelles et les limites de spécification dans les règles de décision

Korean Agency for Technology and Standards (KATS), How to check and accept measuring equipment

KS B ISO 10360-5:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification test for coordinate measuring machines(CMM)-Part 5:CMMs using multiple-stylus probing systems
KS B ISO 10360-5:2014 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems
KS B ISO 10360-7:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
KS B ISO 10360-7:2015 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 7:CMMs used for measuring
KS B ISO 10360-2:2003 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
KS B ISO 10360-2:2014 Geometrical product specifications(GPS)-Acceptance and reverification tests for coodinate measuring machines(CMM)-Part 2:CMMs used for measuring size
KS B ISO 10360-1:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 1:Vocabulary
KS B ISO 10360-1:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 1: Vocabulary
KS B ISO 10360-4:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 4:CMMs used in scanning measuring mode
KS B ISO 10360-4:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 4: CMMs used in scanning measuring mode
KS B ISO 10360-7:2020 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) —Part 7: CMMs equipped with imaging probing systems
KS B ISO 10360-6:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
KS B ISO 10360-6:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring achines(CMM)-Part 6:Estimation of errors in computing Gsussian associated features
KS B ISO 14253-2:2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measu
KS B ISO 10360-3:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 3:CMMs with the axis of a rotary table as the fourth axis
KS B ISO 10360-3:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 3: CMMs with the axis of a rotary table as the fourth axis
KS B ISO 14253-2:2014 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 2:Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
KS B ISO 14253-2:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 2:Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
KS B ISO 14253-2:2015 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
KS B ISO 14253-1:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 1:Decision rules for proving conformance or non-conformance with specifications
KS B ISO 14253-1:2014 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 1:Decision rules for proving conformance or non-conformance with specifications
KS B ISO 14253-1:2015 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformity or nonconformity with specifications
KS C IEC 62150-2:2005 Fibre optic active components and devices-Test and measurement procedures-Part 2:ATM-PON transceivers
KS C IEC 62150-2:2013 Fibre optic active components and devices－Test and measurement procedures－Part 2：ATM－PON transceivers
KS B ISO 14253-3:2014 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements
KS B ISO 14253-3:2012 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieces and measuring equipment-Part 3:Guide lines for achieving agreements on measurement uncertainty statements
KS B ISO 14253-1:2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 1: Decision rules for verifying conformity or nonconformity with specifications

RU-GOST R, How to check and accept measuring equipment

GOST IEC 62058-11-2012 Electricity metering equipment AC. Acceptance inspection. Part 11. General acceptance inspection methods
GOST IEC 62052-21-2014 Electricity metering equipment (a.c.). General requirements, tests and test conditions. Part 21. Tariff and load control equipment
GOST IEC 62058-21-2012 Electricity metering equipment AC. Acceptance inspection. Part 21. Particular requirements for electromechanical meters for active energy accuracy classes 0,5, 1 and 2

British Standards Institution (BSI), How to check and accept measuring equipment

BS EN ISO 10360-5:2010 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems
BS EN 62052-21:2005 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Tariff and load control equipment
BS EN 62052-21:2004 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
BS EN ISO 14253-3:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidelines for achieving agreements on measurement uncertainty statements
BS EN ISO 14253-5:2015 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Uncertainty in verification testing of indicating measuring instruments
BS EN ISO 14253-1:2013 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for proving conformity or nonconformity with specification
BS EN 12645:2014 Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
BS EN ISO 14253-1:2017 Tracked Changes. Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Decision rules for verifying conformity or nonconformity with specifications

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to check and accept measuring equipment

GB/T 17215.811-2017 Electricity metering equipment （AC）—Acceptance inspection—Part 11: General acceptance inspection methods
GB/T 17215.821-2017 Electricity metering equipment (AC)—Acceptance inspection—Part 21: Particular requirements for electromechanical meters for active energy (classes 0.5, 1 and 2)
GB/T 17215.831-2017 Electricity metering equipment (AC)—Acceptance inspection—Part 31: Particular requirements for static meters for active energy (classes 0.2 S, 0.5 S, 1 and 2)

Standard Association of Australia （SAA）, How to check and accept measuring equipment

AS 4826.1:2001 Geometric Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment

未注明发布机构, How to check and accept measuring equipment

BS EN ISO 14253-2:2011(2013) Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment Part 2 : Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
GJB 763.3-1989 Ship noise limits and measurement methods Ship equipment air noise acceptance limits

International Organization for Standardization (ISO), How to check and accept measuring equipment

ISO 10360-1:2000/cor 1:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary; Technical Corrigendum 1
ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 14253-2:2011/cor 1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technica
ISO/TS 14253-2:1999/Cor 1:2007 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification; Technical Co
ISO/TS 14253-2:1999 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems
ISO/TS 14253-3:2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO 14253-1:2013 Geometrical product specifications (GPS).Inspection by measurement of workpieces and measuring equipment.Part 1: Decision rules for proving conformity or nonconformity with specifications
ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 1: Decision rules for proving conformance or non-conformance with specifications
ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications
ISO/TR 14253-6:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces

American National Standards Institute （ANSI), How to check and accept measuring equipment

ANSI S2.16-1997 Vibration Noise Measurements and Acceptance Requirements for Shipboard Equipment
ANSI/ASA S2.16-1997 Vibratory Noise Measurements and Acceptance Requirements for Shipboard Equipment
ANSI/ASA S12.67-2008 Pre-Installation Airborne Sound Measurements and Acceptance Criteria of Shipboard Equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to check and accept measuring equipment

GB/T 18779.2-2023 Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 2: Guidance for the Evaluation of Measurement Uncertainty in GPS Measurements, Measurement Equipment Calibration, and Product Verification
GB/T 18779.2-2004 Geometrical Product Specifications(GPS)-Inspection by measurement of workpieses and measuring equipment-Part 2:Guide to the estimation of uncertainty in GPS measurement,in calibration of measuring equipment and in product verification
GB/T 16857.9-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 9:CMMs with multiple probing systems
GB/T 18779.1-2002 Geometrical product specifications (GPS)-Inspection by measurement of workpieces and measuring equipment--Part 1:Decision rules for proving conformance or non-conformance with specifications
GB/T 18779.1-2022 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 1:Decision rules for verifying conformity or nonconformity with specifications
GB/T 18779.3-2023 Geometric Product Specification (GPS) Measurement Inspection of Workpieces and Measuring Equipment Part 3: Guidance on reaching a consensus on the expression of measurement uncertainty
GB/T 18779.3-2009 Geometric product specification (GPS) Measurement inspection of workpieces and measuring equipment Part 3: Guidance on reaching a consensus on the expression of measurement uncertainty

国家市场监督管理总局、中国国家标准化管理委员会, How to check and accept measuring equipment

GB/T 18779.6-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments
GB/T 18779.4-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules

European Committee for Standardization (CEN), How to check and accept measuring equipment

EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ENV ISO 14253-2:2001 Geometrical Product Specifications (GPS)- Inspection by Measurement of Workpieces and Measuring Equipments - Part 2: Guide to the Estimation of Uncertainty in GPS Measurement, in Calibration of Measuring Equipment and in Product Verification
EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
EN ISO 14253-2:2011/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technic
CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010)
EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification
EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
EN ISO 14253-1:1998 Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment - Part 1: Decision Rules for Proving Conformance or Non-Conformance with Specifications ISO 14253-1:1998

ES-UNE, How to check and accept measuring equipment

UNE-EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)
UNE-EN ISO 14253-1:2019 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)

German Institute for Standardization, How to check and accept measuring equipment

DIN EN ISO 10360-7:2011-09 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011); German version EN ISO 10360-7:2011
DIN EN ISO 14253-5:2016-12 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015
DIN EN ISO 14253-2:2018 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
DIN ISO/TS 14253-3:2008 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002); German version CEN ISO/TS 14253-3:2007
DIN EN ISO 14253-1:2018-07 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017); German version EN ISO 14253-1:2017
DIN EN ISO 14253-3:2011-10 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011); German version EN ISO 14253-3:2011
DIN EN 62058-11:2011 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods (IEC 62058-11:2008, modified); German version EN 62058-11:2010
DIN EN ISO 14253-1:2018 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
DIN EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011); German version EN ISO 10360-7:2011
DIN CEN ISO/TS 14253-4:2010-11*DIN SPEC 1177:2010-11 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010); German version CEN ISO/TS 14253-4:2010
DIN EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
DIN EN 12645:2015 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:2014
DIN EN ISO 14253-5:2016 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015
DIN EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specifications (ISO 14253-1:2013); German version EN ISO 14253-1:2013
DIN 6868-150:2022 Image quality assurance in diagnostic X-ray departments - Part 150: Acceptance test of medical radiographic and fluoroscopic X-ray equipment
DIN 6868-150:2022-01 Image quality assurance in diagnostic X-ray departments - Part 150: Acceptance test of medical radiographic and fluoroscopic X-ray equipment

Danish Standards Foundation, How to check and accept measuring equipment

DS/EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DS/EN ISO 14253-2/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DS/EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems
DS/EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements
DS/EN ISO 14253-1:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification
DS/CEN ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules

American Society for Testing and Materials (ASTM), How to check and accept measuring equipment

ASTM E1108-86(2004) Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
ASTM E668-10 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
ASTM E668-00 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices

KR-KS, How to check and accept measuring equipment

KS B ISO 10360-7-2020 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) —Part 7: CMMs equipped with imaging probing systems
KS B ISO 14253-2-2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 2: Guidance for the estimation of uncertainty in GPS measurement,in calibration of measu
KS B ISO 14253-1-2020 Geometrical product specifications(GPS) — Inspection by measurement of workpieces and measuring equipment —Part 1: Decision rules for verifying conformity or nonconformity with specifications

Lithuanian Standards Office , How to check and accept measuring equipment

LST EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
LST L ENV ISO 14253-2:2002 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 1425
LST EN ISO 14253-2:2011/AC:2013 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technic
LST EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
LST EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
LST EN ISO 14253-1:2001 Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998)

AT-ON, How to check and accept measuring equipment

OENORM EN ISO 14253-2:2021 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
ONORM S 5240-11-1998 Image quality assurance in X-ray diagnosis - Acceptance testing of dental radiographic equipment - Rules for the inspection of image quality after installation, maintenance and modification

AENOR, How to check and accept measuring equipment

UNE-EN ISO 14253-2:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
UNE-EN ISO 10360-7:2012 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
UNE-EN ISO 14253-3:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
UNE-EN ISO 14253-1:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013)

Acoustical Society of America (ASA), How to check and accept measuring equipment

ASA S12.67-2008 American National Standard Pre-Installation Airborne Sound Measurements and Acceptance Criteria of Shipboard Equipment

PL-PKN, How to check and accept measuring equipment

PN-EN ISO 14253-5-2016-01 P Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
PN Z02010-02-1985 Individual respiratory protective equipment used in air environment Methods of testing Scheme of measuring equipment for the determination of protection time for acting absorbers

Japanese Industrial Standards Committee (JISC), How to check and accept measuring equipment

JIS B 0641-1:2001 Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or nonconformance with specifications

Military Standard of the People's Republic of China-General Armament Department, How to check and accept measuring equipment

GJB 763.2-1989 Ship noise limits and measurement methods Ship equipment structural vibration acceleration acceptance limits

Taiwan Provincial Standard of the People's Republic of China, How to check and accept measuring equipment

CNS 10694-1994 Method of Test for Land Mobile Communication FM or PM Receiver, 25-947MH`7|(Characteristics of the Measuring Equipment and Reference )