ZH
RU
ES

Shear force

Shear force, Total:205 items.

In the international standard classification, Shear force involves: Non-textile floor coverings, Meat, meat products and other animal produce, Medical equipment, Optical equipment, Elements of buildings, Reinforced plastics, Rubber and plastics products, Testing of metals, Road vehicle systems, Adhesives, Rubber, Construction materials, Electromechanical components for electronic and telecommunications equipment, Materials for aerospace construction, Shipbuilding and marine structures in general, Fibre optic communications, Insulating materials, Powder metallurgy, Waxes, bituminous materials and other petroleum products, Soil quality. Pedology, Semi-manufactures of timber, Packaging materials and accessories, Cutting tools.

German Institute for Standardization, Shear force

DIN EN 432:1994 Resilient floor coverings - Determination of shear force; German version EN 432:1994
DIN EN 432:1994-11 Resilient floor coverings - Determination of shear force; German version EN 432:1994
DIN EN 17468-1:2022-09 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets; German version EN 17468-1:2022
DIN EN ISO 20337:2020-01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018); German version EN ISO 20337:2019
DIN EN 2243-6:2006-07 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
DIN CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode; German version CEN/TS 15325:2008
DIN EN ISO 14129:1998-02 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ± 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
DIN EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ˝ 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
DIN 52187:1979-05 Testing of wood; determination of ultimate shearing stress parallel to grain
DIN EN 1737:1998 Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1737:1998

European Committee for Standardization (CEN), Shear force

EN 432:1994 Resilient floor coverings - Determination of shear force
EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
EN 12960:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
PD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode
EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
EN 1943:2002 Self adhesive tapes - Measurement of static shear adhesion
EN 1943:1996 Self Adhesive Tapes - Measurement of Static Shear Adhesion

Professional Standard - Agriculture, Shear force

NY/T 1180-2006 Determination of meat tenderness Shear force method

BE-NBN, Shear force

NBN-EN 432-1994 Resilient floor coverings - Determination of shear force

British Standards Institution (BSI), Shear force

BS EN 432:1994 Resilient floor coverings - Determination of shear force
BS EN 17468-1:2022 Fibre cement products. Determination of pull through and shear resistance and bending strength calculations - Flat sheets
BS EN 17468-2:2022 Fibre-cement products. Determination of pull through and shear resistance and bending strength calculations - Profiled sheets
BS EN ISO 20337:2019 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
BS EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the <+OR-> 45 ° tension test method
BS EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Determination of shear stress and shear strain
BS DD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
BS EN 1943:2003 Self adhesive tapes - Measurement of static shear adhesion
BS EN ISO 29863:2019 Self adhesive tapes. Measurement of static shear adhesion

Danish Standards Foundation, Shear force

DS/EN 432:1995 Resilient floor coverings - Determination of shear force
DS/EN 12960/AC:2007 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
DS/EN 12960:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
DS/EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
DS/CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode
DS/EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45º tension test method
DS/EN 1943:2003 Self adhesive tapes - Measurement of static shear adhesion

Lithuanian Standards Office , Shear force

LST EN 432-2002 Resilient floor coverings - Determination of shear force
LST EN 12960-2002 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
LST EN 12960-2002/AC-2007 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
LST EN 2243-6-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
LST EN ISO 14129:2001 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997)
LST EN 1943-2003 Self adhesive tapes - Measurement of static shear adhesion

未注明发布机构, Shear force

BS EN 432:1994(2010) Resilient floor coverings — Determination ofshear force
BS EN 1943:2002 Self adhesive tapes — Measurement of static shear adhesion

AENOR, Shear force

UNE-EN 432:1995 RESILIENT FLOOR COVERINGS. DETERMINATION OF SHEAR FORCE.
UNE-EN 12960:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance.
UNE 56543:1988 PHYSICAL AND MECHANICAL PROPERTIES OF WOOD. DETERMINATION OF SHEAR STRESS
UNE-EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
UNE-EN ISO 14129:1999 FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +-45o TENSION TEST METHOD. (ISO 14129:1997).
UNE-EN 1943:2003 Self adhesive tapes. Measurement of static shear adhesion.

Aerospace Industries Association/ANSI Aerospace Standards, Shear force

AIA/NAS NA0155-2012 BOLT, CLEVIS, 660 MPa SHEAR, METRIC (Rev 2)
AIA/NAS NA0129-2012 SCREW, CAPTIVE, 100° FLUSH HEAD, OFFSET CRUCIFORM RECESS, TITANIUM, 660 MPa SHEAR, METRIC (Rev 3)
AIA/NAS NA0131-2012 SCREW, CAPTIVE, PAN HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC (Rev 2)
AIA/NAS NA0130-2012 SCREW, CAPTIVE, PAN HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 660 MPa SHEAR, METRIC (Rev 2)
AIA/NAS NA0127-2012 SCREW, CAPTIVE, 100° FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 660 MPa SHEAR, METRIC (Rev 2)
AIA/NAS NA0042-2011 SCREW, CLOSE TOLERANCE, 100° FLUSH HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC (Rev 4)
AIA/NAS NA0038-2016 SCREW, CLOSE TOLERANCE, 100° FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 660 MPa SHEAR, METRIC (Rev 5)
AIA/NAS NA0038-2011 SCREW, CLOSE TOLERANCE, 100° FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 660 MPa SHEAR, METRIC (Rev 4)
AIA/NAS NA0060-2011 SCREW, CLOSE TOLERANCE, 100° FLUSH HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 750 MPa SHEAR, METRIC (Rev 4)
AIA/NAS NA0125-2012 SCREW, CLOSE TOLERANCE, 100° REDUCED CROWN HEAD, OFFSET CRUCIFORM RECESS, TITANIUM, 660 MPa SHEAR, METRIC (Rev 6)
AIA/NAS NA0123-2011 SCREW, CLOSE TOLERANCE, 100° REDUCED CROWN HEAD, OFFSET CRUCIFORM RECESS, ALLOY STEEL, 660 MPa SHEAR, METRIC (Rev 6)
AIA/NAS NA0124-2011 SCREW, CLOSE TOLERANCE, 100 DEG. REDUCED CROWN HEAD, OFFSET CRUCIFORM RECESS, A286 CRES, 660 MPa SHEAR, METRIC (Rev 6)
AIA/NAS NAS7024-7032-2012 PIN, SWAGE LOCKING, 108 KSI STEEL, 100?SHEAR/TENSION HEAD, PULL-TYPE Rev 2
AIA/NAS NAS 4466-1992 Pin, Crimp, 100 Degree Crown Shear/Tension Head (Rev. 1)

ESDU - Engineering Sciences Data Unit, Shear force

ESDU 79016-1979 INELASTIC SHEAR STRESSES AND STRAINS IN THE ADHESIVES BONDING LAP JOINTS LOADED IN TENSION OR SHEAR
STRUCT 03.06.13-1952 Flexible circular frames supported by a shell. Shear forces in a frame due to tangential loads.
STRUCT 03.06.14-1952 Flexible circular frames supported by a shell. Shear forces in a frame due to concentrated radial loads.
ESDU 79016 B-1998 Inelastic shear stresses and strains in the adhesives bonding lap joints loaded in tension or shear.
ESDU 78042-1978 Shear stresses in the adhesives in bonded joints. Single step double lap joints loaded in tension.

PL-PKN, Shear force

PN B04482-1989 Apparatus lor laboratory shear strcngith tcsting of soils willi de lined shear surlaee General technical requirenents
PN P04793-1990 Textiles Velcro strips Determination of delamination and shearing force

Korean Agency for Technology and Standards (KATS), Shear force

KS P 1002-2006 Cut and durability test methods for dressing scissors
KS P 1002-1980 Cut and durability test methods for dressing scissors
KS D 2714-2006 Scanning probe microscope-Method for lateral force microscope
KS M ISO 14129-2016(2021) Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS M ISO 29863:2014 Self adhesive tapes — Measurement of static shear adhesion
KS M ISO 29863-2014(2019) Self adhesive tapes — Measurement of static shear adhesion

Aerospace Industries Association, Shear force

AIA NA 0155-1989 Bolt, Clevis, 660 MPa Shear, Metric (Rev. 1)
AIA NAS 529-1980 (Inactive)Rivet-Flat Head, Hi-Shear, Close Tolerance Shank Rev 5
AIA NAS 1054-1989 Rivet, Protruding Head, Hi-Shear (Supersedes NAS 178) (Rev. 4) R(1994)
AIA NA 0132-1991 Screw, Captive, Pan Head, Offset Cruciform Recess Titanium, 660 MPa Shear, Metric (Rev. 1)
AIA NA 0130-1991 Screw, Captive, Pan Head, Offset Cruciform Recess Alloy Steel, 660 MPa Shear, Metric (Rev. 1)
AIA NA 0131-1991 Screw, Captive, Pan Head, Offset Cruciform Recess A-286 CRES, 660 MPa Shear, Metric (Rev. 1)
AIA NA 0129-1994 Screw, Captive, 100 Degree Flush Head, Offset Cruciform Recess, Titanium, 660 MPa Shear, Metric (Rev. 2)
AIA NAS 2852-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 2853-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 2854-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 2855-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 2856-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 2857-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 2858-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 2859-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 2860-1993 Bolt, 100 Degrees Crown Reduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3)
AIA NAS 464-1996 (Inactive)Bolt - Shear, Close Tolerance (Superseded - February 1989 Use NAS 6203 Thru NAS 6220) (Rev. 18)
AIA NA 0128-1991 Screw, Captive, 100 Degree Flush Head, Offset Cruciform Recess A-286 CRES, 660 MPa Shear, Metric (Rev. 1)
AIA NA 0127-1991 Screw, Captive, 100 Degree Flush Head, Offset Cruciform Recess Alloy Steel, 660 MPa Shear, Metric (Rev. 1)
AIA NA 0039-1996 Screw, Close Tolerance, 100 Deg. Flush Head, Offset Cruciform Recess, Titanium Alloy, 660 MPa, Shear, Metric (Rev. 4)
AIA NA 0125-1996 Screw, Close Tolerance, 100 Deg. Reduced Crown Head, Offset Cruciform Recess, Titanium, 660 MPa Shear, Metric (Rev. 5)
AIA NA 0124-1996 Screw, Close Tolerance, 100 Deg. Reduced Crown Head, Offset Cruciform Recess, A-286 CRES, 660 MPa Shear, Metric (Rev. 5)
AIA NA 0123-1996 Screw, Close Tolerance, 100 Deg. Reduced Crown Head, Offset Cruciform Recess, Alloy Steel, 660 MPa Shear, Metric (Rev. 5)
AIA NAS 4466-1992 Pin, Crimp, 100 Degree Crown Shear/Tension Head (Rev. 1)

Association Francaise de Normalisation, Shear force

NF EN 17224:2019 Détermination de la résistance des adhésifs de bois au cisaillement par compression à températures élevées
NF T57-402*NF EN ISO 14129:1998 Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus over minus 45 degrees tension test method.
NF EN 60749-19/A1:2011 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 19 : résistance de la pastille au cisaillement
NF EN 60749-19:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 19 : résistance de la pastille au cisaillement
XP T47-807:2007 Appareils d'appui en caoutchouc - Détermination de la relaxation de contrainte en cisaillement
NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
NF EN ISO 20337:2019 Composites plastiques renforcés de fibres - Méthode d'essai de cisaillement à l'aide d'un châssis de cisaillement pour la détermination de la contrainte de cisaillement/déformation au cisaillement dans le plan et du module de cisaillement
NF T54-107:1971 Plastics. Thin sheets. Determination of tear resistance (non perforated test piece).
NF X41-031:2003 Self adhesive tapes - Measurement of static shear adhesion
NF B51-032:1981 Laminated bonded wood- Test of compression shear.

American Society for Testing and Materials (ASTM), Shear force

ASTM E519-07 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM E519/E519M-15 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM F1995-12 Standard Test Method for Determining the Shear Force of a Surface Mount Device (SMD) in a Membrane Switch
ASTM F1995-00(2005) Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
ASTM F1995-00 Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
ASTM D3115-95(2000) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D4939-89(2003) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
ASTM D3115-95(2009) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D4939-89(1996) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
ASTM D4939-89(2020) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
ASTM D3115-95(2014) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
ASTM D4939-89(2007) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
ASTM D4939-89(2013) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
ASTM E2126-10 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM E2126-11 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM D945-06 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D6682-01 Standard Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester
ASTM D6682-01(2006) Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
ASTM D6682-08 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
ASTM D945-06(2012) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D945-16 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D945-92(1997) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D945-92(2001)e1 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D3164-03(2011) Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3654/D3654M-00e1 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes

European Association of Aerospace Industries, Shear force

AECMA PREN 2243-6-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 6: Determination of Shear Stress and Shear Strain Edition P 2
AECMA PREN 2563-1989 Aerospace Series Unidirectional Laminates Carbon-Thermosetting Resin Test Method - Determination of Apparent Interlaminar Shear Strength Issue P 1

Group Standards of the People's Republic of China, Shear force

T/CSTM 00822-2022 Shearing test method for titanium columbium solid rivets for civil aircraft

AIA/NAS - Aerospace Industries Association of America Inc., Shear force

NASM1312-4-2018 FASTENER TEST METHODS METHOD 4 LAP JOINT SHEAR (Rev 2)
NA0132-2012 SCREW@ CAPTIVE@ PAN HEAD@ OFFSET CRUCIFORM RECESS@ TITANIUM@ 660 MPa SHEAR@ METRIC (Rev 2)
NA0129-2012 SCREW@ CAPTIVE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ TITANIUM@ 660 MPa SHEAR@ METRIC (Rev 3)
NA0131-2012 SCREW@ CAPTIVE@ PAN HEAD@ OFFSET CRUCIFORM RECESS@ A286 CRES@ 660 MPa SHEAR@ METRIC (Rev 2)
NA0130-2012 SCREW@ CAPTIVE@ PAN HEAD@ OFFSET CRUCIFORM RECESS@ ALLOY STEEL@ 660 MPa SHEAR@ METRIC (Rev 2)
NA0128-2012 SCREW@ CAPTIVE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ A286 CRES@ 660 MPa SHEAR@ METRIC (Rev 2)
NA0042-2011 SCREW@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ A286 CRES@ 660 MPa SHEAR@ METRIC (Rev 4)
NA0042-2016 SCREW@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ A286 CRES@ 660 MPa SHEAR@ METRIC (Rev 5)
NA0127-2012 SCREW@ CAPTIVE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ ALLOY STEEL@ 660 MPa SHEAR@ METRIC (Rev 2)
NA0038-2016 SCREW@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ ALLOY STEEL@ 660 MPa SHEAR@ METRIC (Rev 5)
NA0125-2012 SCREW@ CLOSE TOLERANCE@ 100° REDUCED CROWN HEAD@ OFFSET CRUCIFORM RECESS@ TITANIUM@ 660 MPa SHEAR@ METRIC (Rev 6)
NA0060-2016 SCREW@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ ALLOY STEEL@ 750 MPa SHEAR@ METRIC (Rev 5)
NA0039-2012 SCREW@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ TITANIUM ALLOY@ 660 MPa@ SHEAR@ METRIC (Rev 5)
NA0124-2016 SCREW@ CLOSE TOLERANCE@ 100? REDUCED CROWN HEAD@ OFFSET CRUCIFORM RECESS@ A286 CRES@ 660 MPa SHEAR@ METRIC (Rev 7)
NA0038-2011 SCREW@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ ALLOY STEEL@ 660 MPa SHEAR@ METRIC (Rev 4)
NA0131-1991 Screw@ Captive@ Pan Head@ Offset Cruciform Recess A-286 CRES@ 660 MPa Shear@ Metric (Rev 1)
NA0060-2011 SCREW@ CLOSE TOLERANCE@ 100° FLUSH HEAD@ OFFSET CRUCIFORM RECESS@ ALLOY STEEL@ 750 MPa SHEAR@ METRIC (Rev 4)
NA0127-1991 Screw@ Captive@ 100 Degree Flush Head@ Offset Cruciform Recess Alloy Steel@ 660 MPa Shear@ Metric (Rev 1)
NA0123-2011 SCREW@ CLOSE TOLERANCE@ 100° REDUCED CROWN HEAD@ OFFSET CRUCIFORM RECESS@ ALLOY STEEL@ 660 MPa SHEAR@ METRIC (Rev 6)
NA0129-1994 Screw@ Captive@ 100 Degree Flush Head@ Offset Cruciform Recess@ Titanium@ 660 MPa Shear@ Metric (Rev 2)
NASM1312-26-2019 FASTENER TEST METHODS METHOD 26 STRUCTUAL PANEL FASTENER LAP JOINT SHEAR (Rev 2)
NA0039-1996 Screw@ Close Tolerance@ 100 Deg. Flush Head@ Offset Cruciform Recess@ Titanium Alloy@ 660 MPa@ Shear@ Metric (Rev 4)
NA0128-1991 Screw@ Captive@ 100 Degree Flush Head@ Offset Cruciform Recess A-286 CRES@ 660 MPa Shear@ Metric (Rev 1)
NA0042-1996 Screw@ Close Tolerance@ 100 Degree Flush Head@ Offset Cruciform Recess A-286 CRES 660 MPa Shear Metric (Rev 3)
NA0125-1996 Screw@ Close Tolerance@ 100 Deg. Reduced Crown Head@ Offset Cruciform Recess@ Titanium@ 660 MPa Shear@ Metric (Rev 5)
NASM8906-2014 BOLT@ ALLOY STEEL@ SHEAR AND TENSILE (132 KSI MIN Fsu AND 220 KSI MIN Ftu)@ 450 °F@ SPLINE DRIVE@ GENERAL SPECIFICATION FOR (Rev 2)
NASM8906-2012 BOLT@ ALLOY STEEL@ SHEAR AND TENSILE (132 KSI MIN Fsu AND 220 KSI MIN Ftu)@ 450 °F@ SPLINE DRIVE@ GENERAL SPECIFICATION FOR (Rev 1)
NA0123-1996 Screw@ Close Tolerance@ 100 Deg. Reduced Crown Head@ Offset Cruciform Recess@ Alloy Steel@ 660 MPa Shear@ Metric (Rev 5)
NA0124-1996 Screw@ Close Tolerance@ 100 Deg. Reduced Crown Head@ Offset Cruciform Recess@ A-286 CRES@ 660 MPa Shear@ Metric (Rev 5)
NAS7004-7012-2013 PIN@ SWAGE LOCKING@ A286 CRES@ 100° SHEAR/TENSION HEAD@ PULL-TYPE (Rev 3)
NAS7014-7022-2011 PIN@ SWAGE LOCKING@ A286 CRES@ PROTRUDING HEAD@ SHEAR/TENSION@ PULL-TYPE (Rev 3)
NAS7014-7022-2016 PIN@ SWAGE LOCKING@ A286 CRES@ PROTRUDING HEAD@ SHEAR/TENSION@ PULL-TYPE (Rev 4)
NAS7034-7042-1984 Pin@ Swage Locking@ 108 KSI Steel@ Protruding Head@ Shear/Tension@ Pull-Type (Rev 1)
NAS7024-7032-2012 PIN@ SWAGE LOCKING@ 108 KSI STEEL@ 100° SHEAR/TENSION HEAD@ PULL-TYPE (Rev 2)
NAS7024-7032-2014 PIN@ SWAGE LOCKING@ 108 KSI STEEL@ 100° SHEAR/TENSION HEAD@ PULL-TYPE (Rev 3)
NAS7014-7022-1990 Pin@ Swage Locking@ A-286 CRES@ Protruding Head@ Shear/Tension@ Pull-Type (Rev 2)
NAS7004-7012-1990 Pin@ Swage Locking@ A-286 CRES@ 100 Degree Shear/Tension Head@ Pull-Type (Rev 2)
NAS7024-7032-1984 Pin@ Swage Locking@ 108 KSI Steel@ 100 Degree Shear/Tension Head@ Pull-Type (Rev 1)
NAS7034-7042-2011 PIN@ SWAGE LOCKING@ ALLOY STEEL@ 108 KSI Fsu@ PROTRUDING HEAD@ SHEAR/TENSION@ PULL-TYPE (Rev 2)
NAS7034-7042-2014 PIN@ SWAGE LOCKING@ ALLOY STEEL@ 108 KSI Fsu@ PROTRUDING HEAD@ SHEAR/TENSION@ PULL-TYPE (Rev 3)

VN-TCVN, Shear force

TCVN 4199-1995 Construction earth.Determination of shear resistance by box.shear devices

RU-GOST R, Shear force

GOST R ISO 6311-1993 Road vehicles. Brake linings. Internal shear strength of lining material. Test procedure
GOST 211-1975 Ebonite. Method for determination of shear strength
GOST R 54476-2011 Soils. Methods of laboratory determination of characteristics of shear resistance of soils in road construction
GOST R 54476-2011(2019) Soils. Methods of laboratory determination of characteristics of shear resistance of soils in road construction

International Organization for Standardization (ISO), Shear force

ISO 13445:1995 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
ISO 20337:2018 Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
ISO 29863:2007 Self adhesive tapes - Measurement of static shear adhesion
ISO 29863:2018 Self adhesive tapes - Measurement of static shear adhesion

国家市场监督管理总局、中国国家标准化管理委员会, Shear force

GB/T 41498-2022 Fibre-reinforced plastic composites—Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus

National Aeronautics and Space Administration (NASA), Shear force

NASA NACA-TN-1348-1947 Critical shear stress of curved rectangular panels
NASA NACA-ARR-L5A05-1945 An empirical formula for the critical shear stress of curved sheets

ES-UNE, Shear force

UNE-EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
UNE-EN ISO 20337:2020 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
UNE-EN ISO 29863:2020 Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018)

TR-TSE, Shear force

TS 3459-1980 WOOD — DETERMINATION OF ULTIMATE SHEARING STRESS PARALLEL TO GRAIN

RO-ASRO, Shear force

STAS 12219-1984 WOOD PARTICLE BOARDS Shearing resistance determination paral- lel to board plane
STAS 1809-1987 PLYWOOD Determination of glue strength to shearing

GB-REG, Shear force

REG NACA-TM-774-1935 Tension fields in originally curved, thin sheets during shearing stresses

International Electrotechnical Commission (IEC), Shear force

IEC 61300-2-3:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-3: Tests - Static shear load

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Shear force

GB/T 18310.3-2001 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-3: Tests--Static shear load

KR-KS, Shear force

KS M ISO 14129-2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method

Professional Standard - Aviation, Shear force

HB 6687-1992 Test method for durability of glued joints under tensile shear stress

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Shear force

PREN 2243-6-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 6: Determination of Shear Stress and Shear Strain (Edition P 2)

Aerospace, Security and Defence Industries Association of Europe (ASD), Shear force

ASD-STAN PREN 2243-6-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 6: Determination of Shear Stress and Shear Strain (Edition P 2)

Japanese Industrial Standards Committee (JISC), Shear force

JIS K 7019:1999 Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension test method

CEN - European Committee for Standardization, Shear force

EN ISO 29863:2019 Self adhesive tapes - Measurement of static shear adhesion