ZH
RU
ES

one old and one qualitative

one old and one qualitative, Total:500 items.

In the international standard classification, one old and one qualitative involves: Character sets and information coding, Quality, Fuels, Welding, brazing and soldering, Mobile services, Electrical accessories, Medical equipment, Machine tools, Electrical wires and cables, Vocabularies, Power transmission and distribution networks, Machine tool systems, Sports equipment and facilities, Radiocommunications, Medical sciences and health care facilities in general, Services, Environmental protection, Burners. Boilers, Elements of buildings, Mining equipment, Fibre optic communications, Rails and railway components, Fruits. Vegetables, Horology, Farming and forestry, Acoustics and acoustic measurements, Aircraft and space vehicles in general, Iron and steel products, Telecommunications in general, Cutting tools, Measurement of volume, mass, density, viscosity, Electronic tubes, Protective equipment, Non-metalliferous minerals, Applications of information technology, Domestic, commercial and industrial heating appliances, Data storage devices, Metalliferous minerals, Bearings, Pulps, Refractories, Information technology (IT) in general, Accident and disaster control, Radiation protection, Analytical chemistry, Coals, Telecommunication services. Applications, Protection against fire, Kitchen equipment, Ergonomics, Shipbuilding and marine structures in general, Fasteners, Interface and interconnection equipment, Chipless working equipment, Refrigerating technology, Microprocessor systems, Paper and board, Processes in the food industry, IT terminal and other peripheral equipment, Installations in buildings, Earthworks. Excavations. Foundation construction. Underground works, Radiation measurements, Solar energy engineering, Languages used in information technology, Inland navigation vessels, Postal services, Aids for disabled or handicapped persons, Road vehicles in general, Valves, Graphical symbols.

HU-MSZT, one old and one qualitative

American National Standards Institute （ANSI), one old and one qualitative

ANSI/AIM-BC2-1995 Uniform Symbology Specification - Interleaved 2-Of-5
ANSI/TIA/EIA 455-59-A-2000 Measurement of Fiber Point Defects Using an OTDR
ANSI/UL 651Aa-2011 Standard for Safety for Type EB and A Rigid PVC Conduit and HDPE Conduit

IETF - Internet Engineering Task Force, one old and one qualitative

RFC 5004-2007 Avoid BGP Best Path Transitions from One External to Another
RFC 8393-2018 "Operating the Network Service Header (NSH) with Next Protocol ""None"""

RO-ASRO, one old and one qualitative

STAS 6679/14-1985 Metal cutt ing machinc-tools METHODS OF TESTING THE QUARENNESS OF AN AXIS TO HE FRONT SURFACE
STAS 12365-1985 PERSONAL PHOTOGRAPHIC DOSEMETERS General technical requirements for quality
STAS 6679/11-1985 Metal-cutting machinc-tools HECKING METHOD SQUARE- ESS OF A MOVING ELEMENT IRECTION OF MOVEENT TO AN XIS ORPLANE
STAS 9859-1974 ELECTRONIC. COMPONENTS Mcasurcmcnt of the dimensions of a cylindrical component having two axial tcrminations
STAS 943-1970 Office furniture CUPBOARDS WITH TWO DOORS General requirements
STAS 11200/22-1978 Graphical symbols GRAPHICAL SYMBOL FOR MOVEMENT IN ONE DIRECTION
STAS 8575-1988 GENERAL USE PORTAL CRANES MONOGIRGER PORTAL CRANES WITH ONE OR TWO HOOKS Types and main parameters
STAS 9222-1980 Machines and equipments for digging EXCAVATORS WITH ONE BUCKET Main parameters
STAS 6679/4-1985 Metal cutting maehinc-tools METHODE CHECKING PABAL- LELISM OF THE MOVING BODY BIRECTION TO A PLANE OR AN AXIS
STAS 6679/7-1985 Metal cutting machine-tools PARALIELISM OF THE AXIS TO A PLANE CHEKING UP METHODS

Japanese Industrial Standards Committee (JISC), one old and one qualitative

JIS Z 9056:1979 Significance test of equality of the two population variances (one-sided)
JIS Z 9046:1965 Significance test of difference between the two population means (standard deviations known, one-sided)
JIS Z 9048:1979 Significance test of difference between the two population means (standard deviations unknown, one-sided)
JIS Z 9054:1966 Significance test of equality of the population variance and the standard (one-sided)
JIS P 8202:1976 Method of testing water content of lot of paper pulp
JIS M 8820:2000 Coal and coke -- Determination of total moisture content of a lot
JIS P 8127:2010 Paper and board -- Determination of moisture content of a lot -- Oven-drying method
JIS Z 4332:2002 General requirements of personal dosemeters for X and gamma radiations

European Committee for Standardization (CEN), one old and one qualitative

EN ISO 16993:2015 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2015)
EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another
EN ISO 9004:2009 Managing for the sustained success of an organization - A quality management approach (ISO 9004:2009)
prEN 15544-2021 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) - Dimensioning
EN 9137:2012 Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System
EN 30-1-4:2012 Domestic cooking appliances burning gas - Safety - Part 1-4: Appliances having one or more burners with an automatic burner control system
EN 15869-1:2010 Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 1: General requirements

International Organization for Standardization (ISO), one old and one qualitative

ISO 16993:2015 Solid biofuels — Conversion of analytical results from one basis to another
ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another
ISO 3655:1986 Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table — General introduction and testing of the accuracy
ISO/IEC 15459-4:2008 Information technology - Unique identifiers - Part 4: Individual items
ISO/TR 21835:2020 Health informatics — Personal health data generated on a daily basis
ISO 7240-27:2018 Fire detection and alarm systems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors
ISO/IEC 24707:2018 Information technology — Common Logic (CL) — A framework for a family of logic-based languages

North Atlantic Treaty Organization Standards Agency, one old and one qualitative

STANAG 4299-1996 SPECIFICATION AMMONIUM PERCHLORATE (NH4Cl04) FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER
STANAG 4021-1983 SPECIFICATION FOR CE (TETRYL) FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER
STANAG 4025-1991 SPECIFICATION FOR TNT (TOLITE) FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER
STANAG 4178-1991 TEST PROCEDURES FOR ASSESSING THE QUALITY OF DELIVERY OF NITROCELLULOSE FROM ONE NATO NATION TO ANOTHER
STANAG 4022-1983 SPECIFICATION FOR RDX (HEXOGENE) FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER
STANAG 4230-2002 SPECIFICATION FOR HNS (HEXANITROSTILBENE) EXPLOSIVE FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER
STANAG 4543-2002 EXPLOSIVES, SPECIFICATION FOR NTO (3-NITRO-1, 2, 4-TRIAZOL-5-ONE) FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER
STANAG 4300-1993 TEST PROCEDURES FOR ASSESSING THE QUALITY OF ALUMINIUM POWDER FOR USE IN EXPLOSIVE FORMULATION FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER
STANAG 4284-1996 HMX (OCTOGENE) PHYSICAL AND CHEMICAL REQUIREMENTS, SPECIFICATION FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER
STANAG 4566-2004 EXPLOSIVES:SPECIFICATIONS FOR CL-20 (HEXANITROHEXAAZAISOWURTZITANE) FOR DELIVERIES FROM ONE NATO NATION TO ANOTHER

SE-SIS, one old and one qualitative

SIS SS 78 02 47-1980 Shipbuilding — Lugs with one hole
SIS SS 78 08 68-1983 Shipbuilding - Round nuts with an outside key-way for ships' side scuttles
SIS SMS 2928-1971 Bonded abrasive products. Grinding wheels with one recess for interna! grinding
SIS SS 81 73 82-1981 Wood doorsets - Mortices for one-bolt spring locks and striking plates
SIS SS 82 56 20-1982 Wastewater treatment — Septic tanks for 1—5 households — General requirements

Association of German Mechanical Engineers, one old and one qualitative

DVS 0404-1971 Welding with two arcs at one workpiece
VDI 2230 Blatt 1-2003 Systematic calculation of high duty bolted joints - Joints with one cylindrical bolt
VDI 2230 Blatt 1-2015 Systematic calculation of highly stressed bolted joints - Joints with one cylindrical bolt
VDI 2230 Blatt 1-2014 Systematic calculation of highly stressed bolted joints - Joints with one cylindrical bolt

International Telecommunication Union (ITU), one old and one qualitative

ITU-T D.607R-2021 One network area roaming
ITU-R S.744-1992 Orbit/Spectrum Improvement Measures for Satellite Networks Having More Than One Service in One or More Frequency Bands - Section 4D2 - Coordination Methods
ITU-T M.450-1988 BRINGING A NEW INTERNATIONAL TRANSMISSION SYSTEM INTO SERVICE
ITU-T D.604 R ARABIC-2005 The last international transit center pays the traffic
ITU-T D.604 R CHINESE-2005 The last international transit center pays the traffic
ITU-T D.604 R RUSSIAN-2005 The last international transit center pays the traffic
ITU-T D.604R-2005 The last international transit center pays the traffic
ITU-R S.744 FRENCH-1992 Orbit/Spectrum Improvement Measures for Satellite Networks Having More Than One Service in One or More Frequency Bands
ITU-R S.744 SPANISH-1992 Orbit/Spectrum Improvement Measures for Satellite Networks Having More Than One Service in One or More Frequency Bands
ITU-T J.180-2000 User Requirements for Statistical multiplexing of Several Programmes on a Transmission Channel
ITU-T H.850-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 10: Transcoding for Bluetooth Low Energy: Personal Health Gateway - General requirements
ITU-T D.105 FRENCH-1993 CHARGING FOR CALLS FROM OR TO A PUBLIC CALL OFFICE
ITU-T D.105 SPANISH-1993 CHARGING FOR CALLS FROM OR TO A PUBLIC CALL OFFICE
ITU-T D.105-1993 CHARGING FOR CALLS FROM OR TO A PUBLIC CALL OFFICE
ITU-R BR.1216-1 FRENCH-2001 Recording of Television or Sound Programmes on Magnetic Tape in the Case When Several Programmes are Intended for Broadcasting in the Same Digital Multiplex
ITU-R BR.1216-1 SPANISH-2001 Recording of television or sound programmes on magnetic tape in the case when several programmes are intended for broadcasting in the same digital multiplex
ITU-R QUESTION 29/6-2002 Transmission of supplementary information with a single transmitter in frequency-modulation sound broadcasting

British Standards Institution (BSI), one old and one qualitative

BS EN ISO 16993:2015 Solid biofuels. Conversion of analytical results from one basis to another
BS EN 15296:2011 Solid biofuels. Conversion of analytical results from one basis to another
BS CWA 14746:2003 Electronic commerce: a case study of the footwear industry in Europe
BS 5506-3:1977 Specification for wash basins - Wash basins (one or three tap holes) - Materials, quality, design and construction
BS EN 30-1-4:2002 Domestic cooking appliances burning gas - Safety - Appliances having one or more burners with an automatic burner control system
BS EN 30-1-4:2012 Domestic cooking appliances burning gas. Safety. Appliances having one or more burners with an automatic burner control system
BS PD CEN/TR 15472:2006 Postal services — Measurement of transit times for parcels by the use of a track and trace system

Association Francaise de Normalisation, one old and one qualitative

NF X34-116:2011 Solid biofuels - Conversion of analytical results from one basis to another.
NF X50-122:2009 Managing for the sustained success of an organization - A quality management approach.
NF C34-420*NF EN 62420:2011 Concentric lay stranded overhead electrical conductors containing one or more gap(s)
NF EN 62420:2011 Conducteurs pour lignes aériennes câblés en couches concentriques comprenant un ou plusieurs intervalle(s)
NF F01-502:1988 Rolling stock. Running over transition from one gradient to another.
NF X06-071:1990 APPLICATION OF STATISTIC. ESTIMATION OF A MEDIAN.
FD V09-503:2022 Analyse sensorielle - Mesure des performances d'un jury, ou plusieurs jurys, réalisant des profils sensoriels quantatifs
NF ISO 12963:2017 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage
NF P51-201-2/A1:2011 Building work - Chimney work - Combustion products evacuation systems serving one or more appliances - Part 2 : contract bill of technical clauses - Specific installation rules for combustion products evacuation systems serving one or more so-called gaseo
NF EN 352-1:2020 Protecteurs individuels contre le bruit - Exigences générales - Partie 1 : serre-tête
NF EN 352-2:2020 Protecteurs individuels contre le bruit - Exigences générales - Partie 2 : bouchons d'oreille
NF DTU 24.1 P1-2:2020 Travaux de bâtiment - Travaux de fumisterie - Installation de systèmes d'évacuation des produits de combustion desservant un ou des appareils - Partie 1-2 : critères généraux de choix des matériaux
NF X35-109:1989 Ergonomics - Acceptable limits of manual load carrying for one person
NF EN 2094:1993 Série aérospatiale - Alliage d'aluminium Al-P7009 - T74 - Pièces matricées 3 mm < a < 150 mm
NF P51-201-2:2006 Building work - Chimney work - Combustion products evacuation systems serving one or more appliances - Part 2 : contract bill of technical clauses - Specific installation rules for combustion products evacuation systems serving one or more so-called gaseo
NF DTU 24.1 P1-1-1:2020 Travaux de bâtiment - Travaux de fumisterie - Installation de systèmes d'évacuation des produits de combustion desservant un ou des appareils- Règles générales - Partie 1-1-1 : cahier des clauses techniques types
NF EN 2093:1993 Série aérospatiale - Alliage d'aluminium Al-P7009 - T74 - Pièces forgées 20 mm < a < 150 mm
NF D32-321-4*NF EN 30-1-4:2012 Domestic cooking appliances burning gas - Safety - Part 1-4 : appliances having one or more burners with an automatic burner control system
NF R18-805:2007 Road vehicles - Access of at least one reduced mobility passenger to taxi.
NF B35-029:1974 Laboratory glassware. General purpose interchangeable stopcocks with single straight bore.
NF EN 2126:1993 Série aérospatiale - Alliage d'aluminium Al-P7075 - T651 - Tôles épaisses - 6 mm < a < 80 mm

RU-GOST R, one old and one qualitative

GOST R 55113-2012 Solid biofuels. Conversion of analytical results from one basis to another
GOST 18316-2013 Canned food. First dinner dishes. Specifications
GOST 12492.4-1990 Agricultural machinery. One-notched section. Dimensions
GOST 22617.4-1991 Beet seeds. Methods for determinations of 1000 seeds mass and one sowing unit mass
GOST 4060-1978 Needle roller bearings. Outer shell and roller assembly. Technical conditions
GOST R 22.3.06-1997 Safety in emergencies. Individual protection means from radioactive substances. General technical requirements
GOST 29169-1991 Laboratory glassware. One-mark pipettes
GOST 28406-1989 Personal computers. Videomonitors interfaces. General requirements
GOST 12.4.041-2001 Occupational safety standards system. Fil tering respiratory protective equipment. General requirements
GOST 27201-1987 Personal computers. Types, basic parameters, general requirements
GOST 12.4.041-1989 Occupational safety standards system. Means for individual protection of breathing organs. Specifications
GOST R 12.4.230.1-2007 Occupational safety standards system. Personal eyes protection means. General technical requirements
GOST R 53265-2009 Mean of individual defence of feet for fire-fighter. General technical requirements. Test methods
GOST 27954-1988 Personal computers data display facilities videomonitors. General technical requirements

GB-REG, one old and one qualitative

REG 36 CFR PART 1231-2011 TRANSFER OF RECORDS FROM THE CUSTODY OF ONE EXECUTIVE AGENCY TO ANOTHER
REG 29 CFR PART 4064-2011 LIABILITY ON TERMINATION OF SINGLE-EMPLOYER PLANS UNDER MULTIPLE CONTROLLED GROUPS
REG NASA-LLIS-1588-2004 Lessons Learned ?Next Generation Launch Technology (NGLT)/Middle-Management Integration is a Powerful Tool
REG NASA-LLIS-1581-2005 Lessons Learned - Thermal Sensor Installation Failures Remain a Problem
REG NASA-LLIS-1739--2005 Lessons Learned ?Thermal Sensor Installation Failures Remain a Problem (2003)
REG NASA-LLIS-1589--2004 Lessons Learned - Next Generation Launch Technology (NGLT) / Create an Environment That Will Accept ?Bad News? by Management

Defense Logistics Agency, one old and one qualitative

DLA A-A-55168 C-2007 FUSEHOLDER, BLOCK, CLASS H, 30 AMPERE, 250 V AC, ONE, TWO, AND THREE POLE
DLA A-A-55426 C-2007 FUSEHOLDER, BLOCK, CLASS H, 60 AMPERE, 600 V AC, ONE, TWO, AND THREE POLE
DLA A-A-55427 C-2007 FUSEHOLDER, BLOCK, CLASS H, 60 AMPERE, 250 V AC, ONE, TWO, AND THREE POLE
DLA A-A-55428 C-2007 FUSEHOLDER, BLOCK, CLASS H, 30 AMPERE, 600 V AC, ONE, TWO, AND THREE POLE
DLA A-A-55429 C-2007 FUSEHOLDER, BLOCK, CLASS H, 100 AMPERE, 600 V AC, ONE, TWO, AND THREE POLE
DLA MS35254 REV C-2009 BRACE, CORNER, BOX 3 QUARTER-ROUND FLANGES, 3 MOUNTING HOLES
DLA MIL-DTL-24558/30 B-2011 TERMINAL BOXES, CONNECTION, SUBMERSIBLE (15-FOOT), 500 VOLTS, THREE-PHASE, SYMBOL NO. 576.1 - TWO CIRCUITS FOR 150 MCM CABLE, ONE CIRCUIT FOR 200 MCM CABLE AND ONE CIRCUIT FOR 400 MCM CABLE, SYMBOL NO. 577.1 - ONE CIRCUIT FOR 150 MCM CABLE, ONE CIRCUIT F
DLA A-A-59653 A-2006 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, ONE DOUBLE CONE, TWO SINGLE CUPS (TYPES TDI AND TDIS)
DLA A-A-59655 A-2006 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP (TYPE TDOS)
DLA A-A-59654 A-2006 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP (TYPE TDO)
DLA A-A-59653 A VALID NOTICE 1-2011 Bearings, Roller, Tapered, Double Row, One Double Cone, Two Single Cups (Types TDI and TDIS)
DLA A-A-59654 A VALID NOTICE 1-2011 Bearings, Roller, Tapered, Double Row, Normal Angle, Two Single Cones, One Double Cup (Type TDO)
DLA A-A-59655 A VALID NOTICE 1-2011 Bearings, Roller, Tapered, Double Row, Steep Angle, Two Single Cones, One Double Cup (Type TDOS)
DLA A-A-59655 B-2011 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP (TYPE TDOS)
DLA MS35257 REV C-2009 BRACE, CORNER, BOX, LARGE, 2 QUARTER-ELLIPSE FLANGES, 2 MOUNTING HOLES
DLA A-A-59653 B-2011 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, ONE DOUBLE CONE, TWO SINGLE CUPS (TYPES TDI AND TDIS)
DLA A-A-59657 A VALID NOTICE 1-2011 Bearings, Roller, Tapered, Double Row, Steep Angle, Two Single Cones, One Double Cup, Nonadjustable (Type TNAS)
DLA A-A-59654 B-2011 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP (TYPE TDO)
DLA A-A-59657 B-2011 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, NONADJUSTABLE (TYPE TNAS)
DLA A-A-59657 A-2006 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, STEEP ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, NONADJUSTABLE (TYPE TNAS)
DLA A-A-59656 A VALID NOTICE 1-2011 Bearings, Roller, Tapered, Double Row, Normal Angle, Two Single Cones, One Double Cup, Nonadjustable (Type TNA)
DLA A-A-59656 A-2006 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, NONADJUSTABLE (TYPE TNA)
DLA A-A-59656 B-2011 BEARINGS, ROLLER, TAPERED, DOUBLE ROW, NORMAL ANGLE, TWO SINGLE CONES, ONE DOUBLE CUP, NONADJUSTABLE (TYPE TNA)
DLA MIL-DTL-5423/7 G-2009 BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES), STYLE 2 (ONE ?HOLE MOUNTING, DRILLED PANEL), STYLE 2S (RFI-SHIELDED, ONE ?HOLE MOUNTING, DRILLED PANEL)
DLA A-A-55598 B VALID NOTICE 1-2012 Bearings, Roller, Cylindrical, Single Row of Rollers, Two Roller Retaining Ribs on Inner Ring, One Roller Retaining Rib on Outer Ring, One Direction Locating
DLA MIL-DTL-55021 C (1)-2002 CABLE, ELECTRICAL, SHIELDED SINGLES, SHIELDED AND JACKETED SINGLES, TWISTED PAIRS AND TRIPLES, INTERNAL HOOKUP, GENERAL SPECIFICATION FOR
DLA MIL-DTL-55021 C-2000 CABLE, ELECTRICAL, SHIELDED SINGLES, SHIELDED AND JACKETED SINGLES, TWISTED PAIRS AND TRIPLES, INTERNAL HOOKUP, GENERAL SPECIFICATION FOR

Korean Agency for Technology and Standards (KATS), one old and one qualitative

KS P ISO 11334-4-2007(2017) Walking aids manipulated by one arm－Part 4：Walking sticks with three or more legs
KS B 0703-2002(2017) Method of test for dynamic vibration of two - for - one twister
KS C 2514-1992(2012) Electrical Resistance wires, Ribbons and Sheets for General Use
KS C 1222-1989(2009) Clinical electronic spirometers
KS B ISO 10889-5-2005(2010) Tool holders with cylindrical shank－Part 5：Type D with more than one rectangular seat
KS C IEC 62420-2014(2019) Concentric lay stranded overhead electrical conductors containing one or more gap(s)
KS A 9000-2-1998 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2 : GENERIC GUIDELINES FOR THE APPLICATION OF KS A 9001, KS A 9002 AND KS A 9003
KS F 4752-2004(2009) Components for metal roof-decks
KS E 3133-1990(2011) Tungsten carbide bits and bit blanks for core drills
KS B 5434-1998(2003) WRISTWATCH CASES-DIMENSIONS OF FASTENING ELEMENTS FOR BRACELETS
KS B 3962-1977(2009) Left-or Right -Hand of Cuts, Angles and Threads in Angle Cutters
KS L ISO 1042-2006(2016) Laboratory glassware－One－mark volumetric flasks
KS C 7007-1971(2000) TYPE DESIGNATION SYSTEM FOR PHOTO-TUBES AND PHOTO-MULTIPLIERS
KS C 7007-1971 TYPE DESIGNATION SYSTEM FOR PHOTO-TUBES AND PHOTO-MULTIPLIERS
KS C IEC 62151-2003(2018)
KS A 13485-1998 QUALITY SYSTEMS-MEDICAL DEVICES-PARTICULAR REQUIREMENTS FOR THE APPLICATION OF KS A 9001
KS A 13488-1998 QUALITY SYSTEMS-MEDICAL DEVICES-PARTICULAR REQUIREMENTS FOR THE APPLICATION OF KS A 9002
KS X ISO/IEC 7816-3-2011(2016) Identification card — Integrated circuit(s) card with contact —Part 3: Electronic signals and transmission protocols
KS E ISO 567-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
KS G ISO 4856-2010(2020) Personal eye-protectors－Synoptic tables of requirements for oculars and eye-protectors
KS X 1961-2018 A Common Platform for Network Hardware: Conformance Test Specification of Network Function Board
KS X ISO/IEC 15459-4:2006 Information technology-Unique identifiers-Part 4:Unique identifiers for supply chain management
KS F 2835-2009(2014) Reaction to fire tests for building products exposed to the thermal attack by a single burning item
KS V 8211-1999(2004) Electrical installations in ships Part 306：Equipment－Luminaires and accessories
KS B 4304-2020 Mechanical presses — Methods of measurement of sound level
KS C 3563-1-2018 Personal Wellness Device - Activity Tracker - Part 1: General Requirements
KS A 4919-1994(2009) General requirements for personal X-ray and γ -ray dosemeters
KS X 5008-2007 Color graphics video bios for personal computer
KS X 1960-2018 A Common Platform for Network Hardware:Management Function of Network Function Board
KS X IEC 60617-8-2003(2008) Graphical symbols for diagrams－Part 8：Measuring instruments, lamps and signalling devices
KS X IEC 60617-7-2001(2011) Graphical symbols for diagrams－Part 7：Switchgear, controlgear and protective devices

IT-UNI, one old and one qualitative

NATO - North Atlantic Treaty Organization, one old and one qualitative

STANAG 4023-2001 Specification for Penthrite (PETN) for Deliveries from One NATO Nation to Another (ED 4; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ e
STANAG 4178-2013 TEST PROCEDURES FOR ASSESSING THE QUALITY OF DELIVERIES OF NITROCELLULOSE FROM ONE NATO NATION TO ANOTHER (ED 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone
STANAG 4023-1962 Specification for PETN (Penthrite) for Deliveries from One NATO Nation to Another (ED 2 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5
STANAG 4023-1992 Specification for PETN (Penthrite) for Deliveries from One NATO Nation to Another (ED 3 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5
STANAG 4026-1962 Specification for Picrite (Nitroguanidene) for Deliveries from One NATO Nation to Another (ED 2 AMD 2 Amendment 2: 12/20/1977; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato
STANAG 4024-1962 Specification for Ammonium Nitrate Crystal and Prill-Type A and Type B (for Use in Explosives) for Deliveries from One NATO Nation to Another (ED 2 AMD 2 Amendment 2: 05/03/1976; To obtain please contact your national Defense Standardization Office or the

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, one old and one qualitative

GB/T 30550-2014 Concentric lay stranded overhead electrical conductors containing one or more gap (s)
GB/T 6378.1-2008 Sampling procedures for inspection by variables.Part1:Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

American Society of Quality Control （ASQC), one old and one qualitative

ASQ S3-2012 An attribute chain sampling program

SAE - SAE International, one old and one qualitative

SAE R-203-1997 The Automobile: A Century of Progress
SAE R-281-2000 The First Century of the Detroit Auto Show
SAE R-347-2002 Direct Injection Systems The Next Decade in Engine Technology
SAE T-132-2017 Commercial Aviation and Cyber Security: A Critical Intersection
SAE T-139-2018 Aircraft as a System-of-Systems: A Business Process Perspective
SAE R-227-2003 Alternative Cars in the 21st Century A New Personal Transportation Paradigm (Second Edition)

Henan Provincial Standard of the People's Republic of China, one old and one qualitative

DB4102/T 1-2018 "Six Ones" Government Service Standards

PL-PKN, one old and one qualitative

PN M55551-21-1986 Metal cutting machin? tools Methods of measurement of squareness of a motion to a motion
PN M60280-1965 One—speed bench grinder
PN N08514-1992 Safety of toys. Toys intended to bear the mass of a child. Requirements and testing
PN P84677-1991 Wear testing of individual protection means. General principles
PN M02168-02-1991 General tolerances Geometrical tolerances for features without individual tolerance indications
PN M02168-01-1991 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications

CEN - European Committee for Standardization, one old and one qualitative

EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success
EN 15869-1:2019 Inland navigation vessels - Electrical shore connection@ three phase current 400 V@ 50 Hz@ up to 125 A - Part 1: General requirements

ZA-SANS, one old and one qualitative

SANS 9004:2010 Managing for the sustained success of an organization - A quality management approach
SANS 15459-4:2009 Information technology - Unique identifiers Part 4: Individual items
SANS 10330:2007 Requirements for a Hazard Analysis and Critical Control Point (HACCP) system

WRC - Welding Research Council, one old and one qualitative

BULLETIN 72-1961 THERMAL FATIGUE – A CRITICAL REVIEW
BULLETIN 292-1984 PVRC MILESTONE GASKET TESTS – FIRST RESULTS

Professional Standard - Aviation, one old and one qualitative

HB 547-1989 with one clamping piece double hole fork
HB 547-1974 with one clamping piece double hole fork

Standard Association of Australia （SAA）, one old and one qualitative

AS 4758.1:2008/Amdt 1:2009
AS 4758.1:2008
AS 3547/AMD 1:2000 Breath alcohol testing devices for personal use; Amendment No.1

European Committee for Electrotechnical Standardization（CENELEC）, one old and one qualitative

EN 62420:2008 Concentric lay stranded overhead electrical conductors containing one or more gap(s)
EN 60244-14:1997 Methods of Measurement for Radio Transmitters Part 14: External Intermodulation Products Caused by Two or More Transmitters Using the Same or Adjacent Antennas

Danish Standards Foundation, one old and one qualitative

DS/EN 62420:2008 Concentric lay stranded overhead electrical conductors containing one or more gap(s)
DS/EN 15544:2009 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) - Dimensioning
DS/ISO/IEC 15459-4:2008 Information technology - Unique identifiers - Part 4: Individual items

AENOR, one old and one qualitative

UNE-EN 62420:2009 Concentric lay stranded overhead electrical conductors containing one or more gap(s)
UNE 18060:1978 GEARS. CUTTING TOOLS. HOBBING CUTTERS WITH ONE FILLET TIPS. QUALITY.
UNE 15322:1992 ACCEPTANCE CONDITIONS FOR VERTICAL TURNING AND BORING LATHES WITH ONE OR TWO COLUMNS AND A SINGLE FIXED OR MOVABLE TABLE. GENERAL INTRODUCTION AND TESTING OF THE ACCURACY.
UNE 28506:1978 DIMENSIONS OF LEVER SWITCH OF MANUAL OPERATION, FIXED BY ONE OR THREE BORINGS (CLASS 3) USED IN AIRCRAFT.
UNE-EN ISO 1042:1999 LABORATORY GLASSWARE. ONE-MARK VOLUMETRIC FLASKS. (ISO 1042:1998).
UNE-EN 50332-2:2014 Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one packa
UNE 53231-1:2011 Plastics. Core of flexible polyurethane (PUR) foams for mattresses. Characteristics and test methods. Part1: Core with one or several non viscoelastic foams layers

未注明发布机构, one old and one qualitative

BS 5506-3:1977(2007) Specification for Wash basins — Part 3 : Wash basins (one or three tap holes) — Materials, quality, design and construction
BS 358:1960(1999) Method for the Measurement of voltage with sphere - gaps — (One sphere earthed)

European Telecommunications Standards Institute (ETSI), one old and one qualitative

ETSI ETR 083-1993 Universal Personal Telecommunication (UPT); General UPT Security Architecture
ETSI TS 118 112-2021 oneM2M; Base Ontology (V3.7.3; oneM2M TS-0012 version 3.7.3 Release 3)
ETSI TS 118 114-2020 oneM2M; LWM2M Interworking (V2.0.1; oneM2M TS-0014 version 2.0.1 Release 2A)
ETSI TS 118 110-2016 oneM2M; MQTT Protocol Binding (V1.1.0; oneM2M TS-0010 version 1.5.1 Release 1)
ETSI TS 118 124-2021 oneM2M; OCF Interworking (V3.2.2; oneM2M TS-0024 version 3.2.2 Release 3)
ETSI TS 118 109-2021 oneM2M; HTTP Protocol Binding (V3.5.0; oneM2M TS-0009 version 3.5.0 Release 3)
ETSI TS 118 110-2021 oneM2M; MQTT Protocol Binding (V3.1.0; oneM2M TS-0010 version 3.1.0 Release 3)
ETSI TS 118 114-2021 oneM2M; LWM2M Interworking (V3.2.0; oneM2M TS-0014 version 3.2.0 Release 3)
ETSI TS 118 101-2016 oneM2M; Functional Architecture (V1.1.0; oneM2M TS-0001 version 1.13.1 Release 1)
ETSI TS 118 109-2016 oneM2M; HTTP Protocol Binding (V1.1.0; oneM2M TS-0009 version 1.5.1 Release 1)
ETSI TS 118 103-2016 oneM2M; Security solutions (V1.1.0; oneM2M TS-0003 version 1.4.2 Release 1)
ETSI TS 118 103-2021 oneM2M; Security solutions (V3.13.0; oneM2M TS-0003 version 3.13.0 Release 3)
ETSI TS 118 120-2021 oneM2M; WebSocket Protocol Binding (V3.0.1; oneM2M TS-0020 version 3.0.1 Release 3)
ETSI TS 118 101-2021 oneM2M; Functional Architecture (V3.22.0; oneM2M TS-0001 version 3.22.0 Release 3)
ETSI TS 118 105-2016 oneM2M; Management Enablement (OMA) (V1.1.0; oneM2M TS-0005 version 1.4.1 Release 1)
ETSI TS 118 108-2016 oneM2M; CoAP Protocol Binding (V1.1.0; oneM2M TS-0008 version 1.3.2 Release 1)
ETSI TS 118 106-2021 oneM2M; Management Enablement (BBF) (V3.6.2; oneM2M TS-0006 version 3.6.2 Release 3)
ETSI TS 118 122-2021 oneM2M; Field Device Configuration (V3.0.2; oneM2M TS-0022 version 3.0.2 Release 3)
ETSI TS 118 108-2021 oneM2M; CoAP Protocol Binding (V3.6.0; oneM2M TS-0008 version 3.6.0 Release 3)
ETSI TS 118 105-2021 oneM2M; Management Enablement (OMA) (V3.5.1; oneM2M TS-0005 version 3.5.1 Release 3)
ETSI TS 101 319-1998 Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Signalling for Basic Calls from an H.323 Terminal to a Terminal in a Switched-Circuit Network (SCN) (V1.6.4)
ETSI TS 118 113-2016 oneM2M; Interoperability Testing (V1.0.0; oneM2M TS-0013 version 1.0.0 Release 1)
ETSI TS 118 116-2021 oneM2M; Secure Environment Abstraction (V3.0.2; oneM2M TS-0016 version 3.0.2 Release 3)
ETSI TS 118 130-2021 oneM2M; Ontology based Interworking (V3.0.2; oneM2M TS-0030 version 3.0.2 Release 3)
ETSI TS 118 123-2021 oneM2M; Home Appliances Information Model and Mapping (V3.7.3; oneM2M TS-0023 version 3.7.3 Release 3)
ETSI ETR 055-2-1992 Universal Personal Telecommunication (UPT); the Service Concept Part 2: General Service Description

Aerospace Industries Association/ANSI Aerospace Standards, one old and one qualitative

AIA/NAS NASM20067-2015 KEY, MACHINE, SQUARE IN CROSS SECTION, ONE END SQUARE, OTHER END ROUND (Rev 2)
AIA/NAS NASM20067-2010 KEY, MACHINE, SQUARE IN CROSS SECTION, ONE END SQUARE, OTHER END ROUND (Rev 1)
AIA/NAS NASM51956-2012 STRAP, RETAINING, ONE HOLE FOR THIN WALL CONDUIT (EMT) (Rev. 3)
AIA/NAS NAS1025-2012 NUT, SELF-LOCKING, PLATE, ONE LUG, REGULAR HEIGHT, NON-CSK (Rev 6)
AIA/NAS NAS1032-2013 NUT, SELF-LOCKING, PLATE, ONE LUG, REGULAR HEIGHT, NON-CSK, FLOATING (Rev 7)

U.S. Military Regulations and Norms, one old and one qualitative

ARMY A-A-52524/11 VALID NOTICE 3-2009 Seal, Plain Encased: One Felt, Plus One Leather or Synthetic Elastomer Sealing Member Spring Loaded
ARMY MIL-T-425 J NOTICE 1-1998 TUBE STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END
ARMY MIL-T-425 J-1994 TUBE STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END

CZ-CSN, one old and one qualitative

CSN 22 4551-1955
CSN 02 2575-1953
CSN ON 70 9478-1963
CSN ISO 8875:1992 Fluorspar - Determination of moisture content of a lot
CSN ON 02 4392-1964
CSN 83 2104-1983 Labour protection. Marking of personál protective equipment. General requirements
CSN ISO 3087:1994 Iron ores. Determination of moisture content of a consignment
CSN 83 2201-1986 Labour safety. Personál respiratory pro- tection equipment. Classification, generál requirements and nomenclature of quality indices
CSN 11 3026-1981 Centrifuga] radial spiral one-stage pumpa with two water entries

ES-AENOR, one old and one qualitative

U.S. Air Force, one old and one qualitative

AIR FORCE MIL-DTL-6645 J-2001 PARACHUTES, PERSONNEL, GENERAL SPECIFICATION FOR

General Motors Corporation (GM), one old and one qualitative

GM 9985598-1993 Adhesive, One-Part, Epoxy Revision A
GM 9985800-1990 Adhesive, One-Part, Structural-Metal
GM 9985837-1997 Adhesive, One-Part, Structural - Metal

NO-SN, one old and one qualitative

NS 8435-2011 General conditions of contract for personal assistance

Anhui Provincial Standard of the People's Republic of China, one old and one qualitative

DB34/T 4232-2022 "Six Ones" Service Standards for Enterprise Start-up

(U.S.) Telecommunications Industries Association , one old and one qualitative

TIA-5022.010-2015 MQTT Protocol Binding (one M2M TS-0010-v1.0.1)

German Institute for Standardization, one old and one qualitative

DIN 4759-1:1986 Process heat installations for more than one kind of energy; one boiler for solid fuel and one for oil or gas and only one chimney; safety requirements and tests
DIN EN ISO 9004:2009 Managing for the sustained success of an organization - A quality management approach (ISO 9004:2009); Trilingual version EN ISO 9004:2009
DIN 31631-5:1988-09 Data element catalogue for bibliographic data; handling of data categories with one entry or more entries in data formats
DIN EN 30-1-4/A1:2008 Domestic cooking appliances burning gas - Part 1-4: Safety - Appliances having one or more burners with an automatic burner control system; German version EN 30-1-4:2002/A1:2006

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, one old and one qualitative

CEPT T/R 21-01-1967 Libre Circulation D'Un Pays A L'Autre Des Abonnes Au Service Radioelectrique Europeen D'Appel
CEPT T/CS 21-08 E-1984 Call Handling Sequences for Diversion of Telephone Calls to Another Number

Lithuanian Standards Office , one old and one qualitative

LST EN 62420-2008 Concentric lay stranded overhead electrical conductors containing one or more gap(s) (IEC 62420:2008)
LST EN 15544-2009 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) - Dimensioning

ISA - International Society of Automation, one old and one qualitative

ISA AUTOMTN CAN PRVNT NEXT FUKUSHIMA-2014 Automation Can Prevent the Next Fukushima

US-FCR, one old and one qualitative

FCR 21 CFR PART 880-2015 GENERAL HOSPITAL AND PERSONAL USE DEVICES
FCR 21 CFR PART 880-2014 GENERAL HOSPITAL AND PERSONAL USE DEVICES
FCR 21 CFR PART 880-2013 GENERAL HOSPITAL AND PERSONAL USE DEVICES
FCR COE ER 690-1-1212-2004 PROFESSIONAL REGISTRATION AS A SELECTIVE PLACEMENT FACTOR

BELST, one old and one qualitative

STB 150-2002 Personal services. Dyening articles. General specifications
STB 751-2004 Personal services. Works drawing-design. General specifications
STB 368-93 Personal services. The operation of binding a book. General spicifications
STB 706-2001 Personal services. Production, maintenance and dyeing of leather goods. General specifications

AIA/NAS - Aerospace Industries Association of America Inc., one old and one qualitative

NAS1384-1989 Strap Assembly@ One Part (Rev 5)
NAS1384-2012 STRAP ASSEMBLY@ ONE PART (Rev 6)
NAS447-1951 Nut Plate - Self-Locking - One Lug (Rev 2)
NAS1026-1974 Nut@ Self-Locking@ Plate - One Lug@ Regular Height@ Csk (Rev 4)
NASM51956-2012 STRAP@ RETAINING@ ONE HOLE FOR THIN WALL CONDUIT (EMT) (Rev 2)
NAS1025-1987 Nut@ Self-Locking@ Plate - One Lug@ Regular Height@ Non-Csk (Rev 5)
NASM21051-1998 Nut@ Self-Locking@ Plate@ One Lug@ Low Height@ Steel@ 125 KSI Ftu@ 450 Degrees F
NASM35140-2011 STRAP@ RETAINING@ ONE HOLE FOR PIPE@ RIGID CONDUIT AND CABLE (Rev 1)
NAS1032-1987 Nut@ Self-Locking@ Plate - One Lug@ Regular Height@ Non-Csk@ Floating (Rev 6)
NAS1771-2013 NUT@ SELF-LOCKING@ PLATE@ ONE LUG@ LOW HEIGHT@ CBORED@ 160 KSI@ 450 °F@ 800 °F (Rev 2)

Aerospace Industries Association, one old and one qualitative

AIA NAS 1384-1989 Strap Assembly, One Part (Rev. 5)
AIA NAS 447-1951 (Inactive)Nut Plate - Self-Locking - One Lug (Rev. 2)
AIA NA 0073-0074-1990 Nut, Self-Locking, Plate, One Lug, Metric, Floating Low Height, C'Bored, 1100 MPa 235 Degrees C, 425 Degrees C REV. 1
AIA NASM51956-2003 Strap, Retaining, One Hole for Thin Wall Conduit (EMT) Rev. 1: FSC 5340
AIA NASM35140-1999 Strap, Retaining, One Hole for Pipe, Rigid Conduit and Cable FSC 5340
AIA NAS 1026-1974 Nut, Self-Locking, Plate - One Lug, Regular Height, Csk (Rev. 4) R(1993)
AIA NAS 1025-1987 Nut, Self-Locking, Plate - One Lug, Regular Height, Non-Csk (Rev. 5) R(1992)

ESDU - Engineering Sciences Data Unit, one old and one qualitative

SPG-M3-4-2007 Why another HEN simulator?

Institute of Electrical and Electronics Engineers (IEEE), one old and one qualitative

SMPTE ST 86:2005 ST 86:2005 - SMPTE Standard - For Motion-Picture Film — Magnetic Audio Records — Two, Three, Four and Six Records on 35-mm and One Record on 17.5-mm Magnetic Film

AT-ON, one old and one qualitative

ONORM S 1205-1998 Minimum wall thickness of barreis for small arms - Construction with one or more barreis
OENORM EN 15544-2021 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves) - Dimensioning
ONORM M 4841-1975 Piain grinding-wheels, with orte recess, Type 5 for surface grinding
ONORM A 6405-1998 Percent, per thousand, parts per million, point, percentage point
ONORM M 4831-1975 Piain grinding-wheels with one recess, Type 5 for internal grinding
ONORM M 4822-1975 Piain grinding-wheeh, with one recess, Type 5 for external cylindrical grinding between centres

CU-NC, one old and one qualitative

NC 90-04-09-1984 Metrological Assurance. One Mark and Two Marks Flasks for General Use. Verification Methods and Means

KR-KS, one old and one qualitative

KS A IEC 61650-2003(2023)
KS A ISO 3951-1-2008 Sampling procedures for inspection by variables－Part 1: Specification for single sampling plans indexed by acceptance quality limit(AQL) for lot-by-lot inspection for a single quality characteristic a

GM North America, one old and one qualitative

GM 9985455-1989 Adhesive, One-Part, Structural - Metal

American Welding Society (AWS), one old and one qualitative

WRC 292:1984 PVRC Milestone Gasket Tests - First Results

Group Standards of the People's Republic of China, one old and one qualitative

T/SHATCMI 0005-2023 Shang hai Quality Improvement Standard for Chinese Herbal sliles (Eleven traceable varieties in the first batch)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., one old and one qualitative

ASHRAE LO-09-053-2009 Comparison Between a Radiant Floor and Two Radiant Walls on Heating and Cooling Energy Demand

Society of Automotive Engineers (SAE), one old and one qualitative

SAE AIR1327-1976 Acoustic Effects Produced by a Reflecting Plane
SAE ARP745-1994 GENERAL COMPONENTS SPECIFICATION FOR EXPLOSIVE ACTUATED VALVES ONE CYCLE

Canadian Standards Association (CSA), one old and one qualitative

CSA ASME A112.4.2-2015 Personal hygiene devices for water closets (First Edition)
CAN/CSA-ISO/IEC 15459-4:2009 Information technology - Unique identifiers - Part 4: Individual items

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, one old and one qualitative

ITU-R BR.1216-1995 Recording of Television Programmes on Magnetic Tape in the Case When Several Programmes are Broadcast in the Same Digital Multiplex

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, one old and one qualitative

ITU-T H.846-2018 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 6: Personal Health Gateway (Study Group 16)
ITU-T H.846-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 6: Personal Health Gateway (Study Group 16)
ITU-T H.846-2019 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 6: Personal Health Gateway (Study Group 16)
ITU-T H.841-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 1: Optimized Exchange Protocol: Personal Health Device (Study Group 16)
ITU-T H.842-2018 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 2: Optimized Exchange Protocol: Personal Health Gateway (Study Group 16)
ITU-T H.841-2018 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 1: Optimized Exchange Protocol: Personal Health Device (Study Group 16)
ITU-T H.842-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 2: Optimized Exchange Protocol: Personal Health Gateway (Study Group 16)
ITU-T H.844-2018 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 4: Continua Design Guidelines: Personal Health Gateway (Study Group 16)
ITU-T H.843-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 3: Continua Design Guidelines: Personal Health Device (Study Group 16)
ITU-T H.844-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 4: Continua Design Guidelines: Personal Health Gateway (Study Group 16)
ITU-T H.843-2018 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 3: Continua Design Guidelines: Personal Health Device (Study Group 16)
ITU-T H.845.5-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 5E: Thermometer (Study Group 16)
ITU-T H.820-2018 Conformance of ITU-T H.810 personal health system: Conformity assessment test plan (Study Group 16)
ITU-T H.845.10-2017 Conformance of ITU-T H.810 personal health system: Personal Health Devices interface Part 5J: Insulin pump (Study Group 16)

SG-SPRING SG, one old and one qualitative

SS 473 Pt.1-1999 Specification for personal eye-protectors
SS 473-1-2011 Specification for personal eye-protectors. Part 1: General requirements

BE-NBN, one old and one qualitative

ETSI - European Telecommunications Standards Institute, one old and one qualitative

TS 118 115-2016 oneM2M; Testing Framework (V2.0.0; oneM2M TS-0015 version 2.0.0 Release 2)
TS 118 112-2016 oneM2M; Base Ontology (V2.0.0; oneM2M TS-0012 version 2.0.0 Release 2; Includes Diskette)
TS 118 109-2016 oneM2M; HTTP Protocol Binding (V2.6.1; oneM2M TS-0009 version 2.6.1 Release 2)
TS 118 124-2016 oneM2M; OIC Interworking (V2.0.0; oneM2M TS-0024 version 2.0.0 Release 2)
TR 118 524-2016 oneM2M; 3GPP Release 13 Interworking (V2.0.0; oneM2M TR-0024 version 2.0.0)
TS 118 110-2016 oneM2M; MQTT Protocol Binding (V2.4.1; oneM2M TS-0010 version 2.4.1 Release 2)
TS 118 114-2016 oneM2M; LWM2M Interworking (V2.0.0; oneM2M TS-0014 version 2.0.0 Release 2)
TS 118 120-2016 oneM2M; WebSocket Protocol Binding (V2.0.0; oneM2M TS-0020 version 2.0.0 Release 2)
TS 118 101-2016 oneM2M; Functional Architecture (V1.1.0; oneM2M TS-0001 version 1.13.1 Release 1)
TS 118 121-2016 oneM2M; oneM2M and AllJoyn Interworking (V2.0.0; oneM2M TS-0021 version 2.0.0 Release 2)
TS 118 111-2016 oneM2M; Common Terminology (V2.4.1; oneM2M TS-0011 version 2.4.1 Release 2)
TS 118 103-2016 oneM2M; Security solutions (V1.1.0; oneM2M TS-0003 version 1.4.2 Release 1)
TS 118 108-2016 oneM2M; CoAP Protocol Binding (V1.1.0; oneM2M TS-0008 version 1.3.2 Release 1)
TR 118 517-2016 oneM2M; Home Domain Abstract Information Model (V2.0.0; oneM2M TR-0017 version 2.0.0)
TS 118 105-2016 oneM2M; Management Enablement (OMA) (V1.1.0; oneM2M TS-0005 version 1.4.1 Release 1)
TR 118 512-2016 oneM2M; End-to-End Security and Group Authentication (V2.0.0; oneM2M TR-0012 version 2.0.0)
TR 118 518-2016 oneM2M; Industrial Domain Enablement (V2.0.0; oneM2M TR-0018 version 2.0.0 Release 2)
TS 118 113-2016 oneM2M; Interoperability Testing (V1.0.0; oneM2M TS-0013 version 1.0.0 Release 1)
TS 118 123-2016 oneM2M; Home Appliances Information Model and Mapping (V2.0.0; oneM2M TS-0023 version 2.0.0 Release 2)
ETR 055-2-1992 Universal Personal Telecommunication (UPT); the Service Concept Part 2: General Service Description

ATIS - Alliance for Telecommunications Industry Solutions, one old and one qualitative

T1.701-1994 Universal Personal Telecommunication (UPT) - Service Description (Service Set One)

API - American Petroleum Institute, one old and one qualitative

API PUBL 1835-1997 Study of Used Motor Oil Recycling in Eleven Selected Countries
API RP 98-2013 Personal Protective Equipment Selection for Oil Spill Responders (First Edition)
API 4004-1967 NEW YORK CITY’S AIR POLLUTION PROBLEM ANOTHER LOOK – SUMMARY REPORT

ECMA - European Association for Standardizing Information and Communication Systems, one old and one qualitative

ECMA 350-2003 Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges - Capacity: 30 Gbytes per Cartridge - First Generation (First Edition)

(U.S.) Ford Automotive Standards, one old and one qualitative

FORD WSS-M2P122-B1-2008 PAINT QUALITY, STEEL WHEELS, 10 CYCLE CORROSION RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M4G330-A-2014 SEALER, SILICONE RUBBER, TWO COMPONENT ***TO BE USED WITH FORD WSS-M99P1111-A***

US-CFR-file, one old and one qualitative

CFR 19-210.60-2013 Customs Duties. Part210:Adjudication and enforcement. Section210.60:Designating the temporary relief phase of an investigation more complicated for the purpose of adjudicating a motion for temporary relief.
CFR 33-148.240-2013 Navigation and navigable waters. Part148:Deepwater ports: general. Section148.240:How does a State or a person intervene in a formal hearing?
CFR 17-38.12-2013 Commodity and Securities Exchanges. Part38:Designated contract markets. Section38.12:Process for a designated contract market to make a swap available to trade.
CFR 5-894.507-2014 Administrative personnel. Part894:Federal employees dental and vision insurance program. SubpartE:Enrolling and changing enrollment. section890.507:After I'm enrolled, may I change from one dental or vision plan or plan option to another?
CFR 33-148.281-2013 Navigation and navigable waters. Part148:Deepwater ports: general. Section148.281:What happens when more than one application is submitted for a deepwater port in the same application area?
CFR 42-405.207-2013 Public Health. Part405:Federal health insurance for the aged and disabled. Section405.207:Services related to a noncovered device.
CFR 42-405.205-2013 Public Health. Part405:Federal health insurance for the aged and disabled. Section405.205:Coverage of a non-experimental/investigational (Category B) device.

NL-NEN, one old and one qualitative

NEN 5786-1991 Soil - Unsaturated zone - Determination of water retention characteristic Underpressure method until h = - 200 cm - Determination with a porous plate in combination with a buret
NEN 1888-1991 General personal data Definitions, character sets and interchange formats

AR-IRAM, one old and one qualitative

IRAM 5541-1953

United States Navy, one old and one qualitative

NAVY MIL-STD-1697 VALID NOTICE 1-1988 TAPE, ONE-HALF INCH VIDEO CASSETTE BROADCAST FORMAT
NAVY MIL-STD-1697-1978 TAPE, ONE-HALF INCH VIDEO CASSETTE BROADCAST FORMAT

American Society for Testing and Materials (ASTM), one old and one qualitative

ASTM C288-87(2002) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM E2489-21 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM F2371-10 Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
ASTM C288-87(2009) Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM E3023-15 Standard Practice for Probability of Detection Analysis for &xe2; Versus a Data
ASTM E3023-21 Standard Practice for Probability of Detection Analysis for

Taiwan Provincial Standard of the People's Republic of China, one old and one qualitative

CNS 13798.1-1996 Banking-Personal Identification Number Management and Security-Part 1:PIN Protection Principles and Techniques
CNS 13798-1-1996 Banking-Personal Identification Number Management and Security-Part 1:PIN Protection Principles and Techniques
CNS 15065-2007 Solar energy - Calibration of a pyranometer using a pyrheliometer

VN-TCVN, one old and one qualitative

TCVN 3588-1981 Straight side single action one poinfpressed.Basic para meters and dimensions
TCVN 3758-1983 Straight side double action one point presses.Basic parameters and dimensions

GOSTR, one old and one qualitative

GOST R 58108-2019 Personal flotation devices. Life and insurance vessels. General specifications
GOST R 59123-2020 Occupational safety standards system. Personal protective equipment. General requirements and classification
GOST R 53265-2019 Fire equipment. Personal protective, means of fire-fighter's feet. General technical requirements. Test methods

IN-BIS, one old and one qualitative

IS 8964 Pt.12-1978
IS 7078-1973
IS 3795-1993 Spices and condiments. Fenugreek, whole and ground. Specification (First Revision)

Professional Standard - Post and Telecommunication, one old and one qualitative

YD/T 2009-2009 Technical reqirement of services based on the unified IMS customized multimedia ringing service (Release 1)
YD/T 2458-2013 Service test method based on unified IMS Personalized ring tone service (first stage)

YU-JUS, one old and one qualitative

JUS Z.B1.010-1984 Individual protective eguipments. Protection of the respiratorysystem. General requi remen ts
JUS C.H1.078-1982 Steel ropes forgeneral purposes. Round stranci rope 6X24 standard + 7 fibra cores
JUS C.H1.310-1987 Tow ropc for passenger with one lock part. Shapes, dimensions and characteristics

FI-SFS, one old and one qualitative

SFS 8034-1986 In case of interpretation disputes the Finnish textapplies

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), one old and one qualitative

ASHRAE 4668-2004 Results of a Residential Proton Exchange Membrane (PEM) Fuel Cell Demonstration at a Military Facility in New York
ASHRAE 4697-2004 An Air-Conditioning Model Validation and Implementation into a Building Energy Analysis Software

PT-IPQ, one old and one qualitative

NP 3735-1988 SOLID FUELS Cokes Determination of bulk density in a large container
NP 3756-1989 SOLID FUELS Cokes Determination of bulk density in a small container

Professional Standard - Water Conservancy, one old and one qualitative

SL 237-018-1999 Code for test of soil - multilevel loading triaxial compression test to a sample

IPC - Association Connecting Electronics Industries, one old and one qualitative

IPC 2220 SERIES- 2220 Series of Design Documents (Set OF 5 Standards (2221@2222@2223@2224@2225 and 2226))

ES-UNE, one old and one qualitative

UNE-EN 4449:2005 Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm =< a =< 6 mm (Endorsed by AENOR in October of 2005.)
UNE-EN 4204:2005 Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm =< a =< 6 mm (Endorsed by AENOR in October of 2005.)

秦皇岛市市场监督管理局标准化科, one old and one qualitative

DB1303/T 334-2022 Guidelines for setting up one platform, cloud window, and integrated office for individual industrial and commercial households

National Aeronautics and Space Administration (NASA), one old and one qualitative

NASA NACA-TN-646-1938 Wind-tunnel tests of a 2-engine airplane model as a preliminary study of flight conditions arising on the failure of one engine
NASA NACA-ARR-L5C01-1945 Wind-tunnel investigation of control-surface characteristics XXI : medium and large aerodynamic balances of two nose shapes and a plain overhang used with a 0.40-airfoil-chord flap on an NACA 0009 airfoil
NASA NACA-ACR-L5G31-1945 A simple method for estimating terminal velocity including effect of compressibility on drag

Conference of European Post Telecommunication (CEPT), one old and one qualitative

CEPT ERC/REC/ 01-07 E-2000 ERC Recommendation on Harmonised Regime for Exemption From Individual Licensing of Radio Equipment

ITE - Institute of Transportation Engineers, one old and one qualitative

RP-015B-1997 Planning Urban Arterial and Freeway Systems: An ITE Proposed@ Revised Recommended Practice