共找到 220 条与 机械制造 (词汇) 相关的标准,共 15 页
Numerical control of machine tools — Vocabulary
Foundry machinery. Vocabulary. Molding and coremaking machines and other equipment related to non-permanent mold casting process
Foundry machinery – Vocabulary – Part 2: Molding and coremaking machines and other equipment related to non-permanent mold casting process
This document defines terms related to friction stir welding. In this document, the term "aluminium" refers to aluminium and its alloys.
Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2020)
This document defines terms related to friction stir welding. In this document, the term “aluminium” refers to aluminium and its alloys.
Friction stir welding — Aluminium — Part 1: Vocabulary
This document defines terms relating to data quality used in the ISO 8000 series of parts.
Data quality — Part 2: Vocabulary
This document specifies terms and definitions for non-destructive testing (NDT) by the technique of metal magnetic memory (MMM) as well as general requirements for application of this technique of the magnetic testing method. The terms specified in this document are mandatory for application in all types of documentation and literature of non-destructive testing, using the metal magnetic memory technique. This NDT technique has the following objectives: — determination of the heterogeneity of the magneto-mechanical state of ferromagnetic objects, detection of defect concentration and boundaries of metal microstructure heterogeneity; — determination of locations with magnetic stray field aberrations for further microstructural analysis and/or non-destructive testing and evaluation; — early diagnostics of fatigue damage of the inspected object and evaluation of its structural life time; — quick sorting of new and used inspection objects by their magnetic heterogeneity for further testing; — efficiency improvement of non-destructive testing by combining metal magnetic memory testing with other NDT methods or techniques (ultrasonic testing, x-ray, etc.) by fast detection of the most probable defect locations; — quality control of welded joints of various types and their embodiment (including contact and spot welding). See ISO 24497-2 for details of this application.
Non-destructive testing — Metal magnetic memory — Part 1: Vocabulary and general requirements
Guidelines for inspection and inspection of major repairs for installation and transformation of bridge and gantry cranes
Standard Terminology Relating to Electroplating
Technical specifications for the installation of non-road diesel mobile machinery particulate capture devices
Elevator Emergency Rescue Management Specifications
1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Terms included cover definitions for machines/systems and their coordinate systems plus the location and orientation of parts. It is intended, where possible, to be compliant with ISO 841 and to clarify the specific adaptation of those principles to additive manufacturing. NOTE 1—The applicability of this standard to cladding has to be evaluated. Discussions are under progress. NOTE 2—Non-cartesian systems are not covered by this standard. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Traction Drive Elevator Safety Assessment Rules
Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding
本标准规定了激光加工机床的机床名称、机床参数、机床主要零部件、加工方法的术语及其定义。 本标准适用于各类激光加工机床及其辅助设备和附配件。
Laser Processing Machine Tool Terminology
This document defines friction stir spot welding (FSSW) process terms and definitions. In this document, the term "aluminium" refers to aluminium and its alloys.
Friction stir spot welding — Aluminium — Part 1: Vocabulary
1.1 This document classifies insulating coatings for electrical steels according to their composition, relative insulating ability, and functionality. The purpose of this classification is to assist users of insulating coatings by providing general information about the chemical nature and use of the coatings, as well as to provide important data concerning limits to their use, that is, relative insulating ability, punchability, temperature stability, weldability, and fabricability. Specific surface insulation resistivity values for each coating are not included in this classification. The user is referred to the flat-rolled electrical steel specifications noted in 1.2 should more detailed information concerning surface insulation resistivity values be required. 1.2 This classification is to be used in conjunction with the various specifications for flat-rolled electrical steels under the jurisdiction of Committee A06, including Specifications A345, A677, A683, A726, A840, A876, and A1086. However, in those instances in which the coating descriptions and characteristics differ between this classification and any of the specifications, this classification shall supersede the specification. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to customary (cgs-emu and inch-pound) units which are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号