01.040.29 电气工程 (词汇) 标准查询与下载

ASTM D2864-20 有关电绝缘液体和气体的标准术语

Standard Terminology Relating to Electrical Insulating Liquids and Gases

T/CPSS 1001-2020 壁挂式单相无源串联稳压装置技术规范

本标准规定了壁挂式单相无源串联稳压装置（以下简称为“装置”）的术语和定义、产品分类与型号命名、适用环境、技术要求、试验方法、检验规则、标志、包装、运输和贮存等内容。

Technical specification for wall mounted single phase passive series voltage stabilizers

T/CPSS 1009-2020 磁性材料高励磁损耗测量方法

本标准规定了软磁磁性材料在高励磁下损耗的测量方法和测量技术要求。

Test methods of power loss of magnetic materials with high excitation

T/CPSS 1008-2020 低压电气设备电压暂降及短时中断耐受能力测试方法

本标准规定了低压电气设备电压暂降和短时中断耐受特性的测试条件、受试设备性能判据、测试设备与布置、测试内容、测试流程、测试数据处理和测试报告要求。

Voltage Dip and Short Interruption Immunity Testing Method for Low Voltage Electrical Equipment

T/CPSS 1004-2020 用户侧电能质量在线监测装置及接入系统技术规范

本标准规定了用户侧电能质量在线监测装置（以下简称监测装置）基本要求，及其接入供电企业电能质量监测系统的数据传输内容、通信方式、通信规约和信息安全。

Technical Specification for Power Quality Monitoring System and Terminal of User Side

T/CPSS 1003-2020 固态切换开关现场验收试验技术规范

本标准规定了固态切换开关装置（简称装置）现场验收试验的相关术语和定义、现场验收试验前准备、现场验收试验电路及要求、试验内容及方法等方面的内容。

Technical specification for solid state transfer switch site acceptance test

IEC 60050-113:2011/AMD3:2020 修改件3.国际电工词汇（IEV）.第113部分:电工物理学

Amendment 3 - International Electrotechnical Vocabulary (IEV) - Part 113: Physics for electrotechnology

ASTM D1711-20 关于电气绝缘的标准术语

Standard Terminology Relating to Electrical Insulation

ASTM F2112-02(2019) 薄膜开关的标准术语

1.1 This terminology defines terms that are commonly used in the membrane switch industry. 1.2 These definitions are not mutually exclusive. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Membrane Switches

DB61/T 1284-2019 厂拌热再生沥青路面施工技术规范

Technical specification for construction of factory-mixed hot recycled asphalt pavement

ASTM B542-13(2019) 有关电触点及其使用的标准术语

1.1 The terms included in this list are those that are peculiar to electric contacts or general terms that have a specific meaning when related to electric contacts. The definitions were prepared assuming that the reader has a general knowledge in a physical science but is unfamiliar with the terminology of the literature of electric contacts. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Electrical Contacts and Their Use

IEC 60050-113:2011/AMD2:2019 修改件2.国际电工词汇（IEV）.第113部分:电工物理学

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 113: Physics for electrotechnology

EN IEC 60276:2019 碳刷、刷架、换向器和滑环 定义和命名法

IEC 60276:2018 applies to carbon brushes for electrical machinery. This edition applies only to carbon brushes for commutators and slip-rings in rotating machines. Terms and definitions are relative to the brush construction (references 100’s to 500’s and parts of 900’s) and to the markings when operating on a rotating machine (references 600’s to 800’s). This new edition includes the following significant technical changes with respect to the previous edition: Some nomenclature has been deleted or added, whereas remaining definitions have been detailed and clarified, to reflect the technical evolution since 1987. Additional definitions have been included to address the request for reviewing this standard, in particular nomenclature of commutator/slip-rings markings, brush markings and commutation sparks codes.

Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature

T/CPSS 1005-2019 中压链式静止无功发生器

规定了中压链式静止无功发生器的术语和定义、型号命名及产品分类、功能要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存等要求。

Medium voltage chain-circuit static var generator

T/CPSS 1002-2019 低压有源电压偏差补偿装置

规定了低压有源电压偏差补偿装置的术语和定义、功能要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存等内容。

Low voltage active voltage deviation compensator

T/CPSS 1004-2019 智能变电站电能质量测量方法

本标准提出合并单元满足电能质量测量的技术要求，对合并单元输出数字信号进行各种电能质量测量的方法进行规范，为智能变电站电能质量测试工作提供理论和技术指导，其他相关国标、行标、企标、国际标准并未涉及本标准的相关内容。

Method of power quality measurement for smart substation

T/CPSS 1003-2019 交流输入电压暂降与短时中断的低压直流型补偿装置技术规范

规定了交流输入电压暂降与短时中断的低压直流型补偿装置（以下简称补偿装置）的术语和定义、补偿装置的组成、技术指标要求、功能要求、试验方法、检验规则、标志、包装、运输和贮存等内容。

Technical specification for low-voltage DC compensator on voltage dips and short interruptions of AC input

T/CPSS 1001-2019 低压混合式动态无功补偿装置

规定了低压混合式动态无功补偿装置（以下简称“装置”）的技术要求、试验方法、检验规则、标志、包装、运输等内容。

Low voltage hybrid dynamic reactive power compensation assemblies

ASTM D2864-19 有关电绝缘液体和气体的标准术语

Standard Terminology Relating to Electrical Insulating Liquids and Gases

ASTM B354-19 关于非绝缘金属电导体的标准术语

1.1 This terminology standard defines abbreviations and terms specific to uninsulated electrical conductors. For terms relating to superconductors, see Terminology B713. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Uninsulated Metallic Electrical Conductors