03.100.10 订购、收购、仓库管理 标准查询与下载

T/GSQA 016-2020 药品储存和养护操作规范

本文件规定了药品分类储存、搬运与堆码以及储存管理要求。

Code of practice for storage and maintenance of pharmaceuticals

T/GSQA 013-2020 兰州牛肉拉面食材供应链原材料 采购管理规范

本文件规定了兰州牛肉拉面原材料采购的职责分工与授权审批、供应商管理、采购计划与审批控制、采购与验收控制、付款控制、监督检查等管理和控制措施。

Lanzhou Beef Ramen Ingredients Supply Chain Raw Material Purchasing Management Specifications

T/SSR 703-2020 多联式空调（热泵）机组连接用铜管订货技术条件

多联式空调（热泵）机组连接用铜管及铜合金管的要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书及订货单（或合同）内容等。

Purchase technical specification for copper connecting tube of multi-split air conditioning (heat pump) unit

NB/T 10464.3-2020 太阳能热利用系统采购技术规范 第3部分：太阳能热水工程

Technical Specifications for Procurement of Solar Thermal Utilization Systems Part 3: Solar Hot Water Engineering

NB/T 10464.1-2020 太阳能热利用系统采购技术规范 第1部分：通则

Technical Specifications for Procurement of Solar Thermal Utilization Systems Part 1: General Provisions

NB/T 10464.5-2020 太阳能热利用系统采购技术规范 第5部分：太阳能采暖工程

Technical Specifications for Procurement of Solar Thermal Utilization Systems Part 5: Solar Heating Projects

NB/T 10464.2-2020 太阳能热利用系统采购技术规范 第2部分：家用太阳能热水系统

Technical Specifications for Procurement of Solar Thermal Utilization Systems Part 2: Domestic Solar Hot Water Systems

NB/T 10464.4-2020 太阳能热利用系统采购技术规范 第4部分：户用太阳能采暖系统

Technical Specifications for Procurement of Solar Thermal Utilization Systems Part 4: Household Solar Heating Systems

NB/T 10464.6-2020 太阳能热利用系统采购技术规范 第6部分：太阳能工业、农业供热工程

Technical Specifications for Procurement of Solar Thermal Utilization Systems Part 6: Solar Industry and Agricultural Heating Projects

T/WD 107-2020 公共海外仓设施技术要求与运营管理规范

  本文件从基本要求方面提出了10项基本要求。其中包括国家或地区选择、报备手续、营商环境考察、法律文件、租赁及外包合同等。   本文件对技术要求提出了9项设施技术要求。从库区建设、规划设计、消防设施、供电管理、绿色环保、安防系统、仓库规模、投资风险方面，对海外仓在建设规划及工程管理等内容提出了明确的要求。   为规范海外仓运营管理，提升管理水平，本文件明确了海外仓的能力要求及6项运营管理规范，包括：制度流程要求、作业要求、服务质量要求、信息化要求、人员能力要求、安全要求。

Facilities technical requirements and operation management specifications for public overseas warehouse

ASTM E2608-20 设备控制矩阵（ECM）的标准实施规程

1.1 This practice describes equipment control classes (ECCs), equipment control levels (ECLs), and their relationships. 1.2 This practice is intended to be applicable and appropriate for all equipment-holding entities. 1.3 This practice covers property categorized as equipment. Equipment as defined in Terminology E2135 is nonexpendable, tangible moveable property needed for the performance of a task or useful in effecting an obligation. 1.4 This practice can be applied to an individual item of equipment, to groupings of equipment, or to all or a subset of an entity’s equipment. 1.5 In accordance with the provisions of Practice E2279, this practice enhances internal controls, and clarifies and enables effective and efficient control and tracking of equipment. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Equipment Control Matrix (ECM)

DB32/T 3740-2020 定点医药机构药品“进销存”监管工作规范

Regulatory Work Specifications for "Invoicing, Selling and Inventory" of Drugs in Designated Medical Institutions

DB44/T 2188-2019 跨境电商冷链物流管理要求

本标准规定了跨境电商冷链物流活动的组织、人员、设施设备、验货管理、贮存保管、运输配送以及追溯体系的管理要求。 本标准适用于保税仓内跨境电商的进口商品冷链物流管理。

Cross-border e-commerce cold chain logistics management requirements

BS 95009:2019 公共部门采购 提供产品和服务的组织的一般要求

What is BS 95009 – Public sector procurement about?    BS 95009 is an international standard that covers stipulations of public sector procurement.   BS 95009 specifies generic requirements to demonstrate an organization’s:   Suitability as an external provider of products and services to the public sector   Ability to work collaboratively to meet the requirements of the contracting authority   BS 95009 gives specifications for organizations providing products and services such as related terms and definitions, the context of the organization, organizational governance, risk and opportunity management, financial and commercial accountability, quality management, performance e...

Public sector procurement. Generic requirements for organizations providing products and services

ASTM E2452-12(2019) 设备管理过程成熟度（EMPM）模型的标准实施规程

1.1 This practice covers a process for the assessment and reporting of an entity’s overall equipment management process maturity (EMPM). 1.2 The highest value is placed on continuous improvement as reflected in measured increases in maturity over time. 1.3 The EMPM model is designed to be applicable and appropriate for all equipment-holding entities, however, the EMPM may not be the only acceptable assessment model available. 1.4 It includes all aspects of equipment management. 1.5 In addition to applicability to equipment and equipment management as defined in this practice, this practice may in whole or in part be effectively applied to intangible property, real property, and material. 1.6 There is great variation across organizations regarding the internal departments that accomplish the various aspects of equipment management. Thus, all criteria are not applicable to all entities. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Equipment Management Process Maturity (EMPM) Model

ASTM E2453-19 估计财产资产所有权的生命周期成本的标准实施规程

1.1 This practice covers the establishment of a process consensus model for determining the life-cycle cost (LCC) of property assets owned or used by an entity. 1.1.1 For businesses, these property assets are required to seek to achieve financial returns from producing and selling goods or services, or both. 1.1.2 For institutions and agencies, these property assets are required to accomplish their primary mission. 1.2 Real and personal property assets may include capital (fixed) assets and movable assets including customer-supplied assets, rental/leased assets, contract/project direct-purchased assets, or expense items. 1.3 Asset service lives can be divided into three distinct stages, each with several separate yet interrelated substages: acquisition, utilization, and disposition. These primary stages are not intended to be all-encompassing but are offered as the basis for establishing LCC. 1.4 This practice is expected to be primarily used for considering the life-cycle cost of personal property, however, the concept can and should be used for various types of assets including personal, real, tangible, and intangible. 1.5 This practice does not supersede applicable generally accepted accounting principles but is intended to be consistent with the accounting principles particularly in the area of internal controls (see the GAO Green Book) and processes and requirements for estimating. Some life-cycle cost estimating may be required for accounting purposes. (See AS 2501.) 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This practice is under the jurisdiction of ASTM Committee E53 on Asset Management and is the direct responsibility of Subcommittee E53.03 on Financial Management. Current edition approved May 1, 2019. Published June 2019. Originally approved in 2005. Last previous edition approved in 2013 as E2453–13. DOI: 10.1520/E2453–19. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Estimating the Life-Cycle Cost of Ownership of Property Assets

DB12/T 876-2019 农村物流综合服务站点运营服务规范

本标准适用于天津市农村物流综合服务站和服务点的运营服务。

Rural logistics comprehensive service site operation service specification

DB12/T 877-2019 农村物流综合服务站点建设规范

本标准适用于天津市农村物流综合服务站点的建设工作。

Specifications for the construction of rural logistics comprehensive service stations

DB62/T 2961-2018 救灾物资储备库管理操作规程

Disaster Relief Material Reserve Management Operation Procedures

ASTM E2263-12(2018) 配对偏好测试​​的标准测试方法

1.1 This document covers a procedure for determining preference between two products using either a two-alternative forced-choice task, or with the option of choosing no preference. Preference testing is a type of hedonic testing. 1.2 A paired preference test determines whether there is a statistically significant preference between two products for a given population of respondents. The target population must be carefully considered. 1.3 This method establishes preference in a single evaluation context. Replicated tests will not be covered within the scope of this document. 1.4 Paired preference testing can address overall preference or preference for a specified sensory attribute. 1.5 The method does not directly determine the magnitude of preference. 1.6 This method does not address whether or not two samples are perceived as different. Refer to Test Method E2164 for directional difference test. 1.7 A paired preference test is a simple task for respondents, and can be used with populations that have minimal reading or comprehension skills, or both. 1.8 Preference is not an intrinsic attribute of the product, such as hue is, but is a subjective measure relating to respondents’ affective or hedonic response. It differs from paired comparison testing which measures objective characteristics of the product. Preference results are always dependent on the population sampled. 1.9 This standard does not purport to address all of the safety problems associated with its use, when testing includes hazardous materials, operations, or equipment. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Paired Preference Test