11.060.10 牙科材料 标准查询与下载
共找到 1591 条与 牙科材料 相关的标准，共 107 页
本文件规定了钛及钛合金材质牙种植体个性化基台的分类及代号、型号、组成、要求、试验方法、检验规则、包装、标识和使用说明、运输和贮存。
Titanium and titanium alloy dental implant personalized abutment
- ICS
- 11.060.10
- CCS
- C2770
- 发布
- 2023-09-22
- 实施
- 2023-09-30
本文件规定了定制式硅橡胶类矫治器的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于定制式硅橡胶类矫治器的生产及检验。以下简称“矫治器”。
Customized silicone rubber braces
- ICS
- 11.060.10
- CCS
- C291
- 发布
- 2023-09-05
- 实施
- 2023-09-20
本文件规定了等离子喷涂羟基磷灰石涂层－钛基牙种植体的技术要求和试验方法。本文件适用于锻制钛或钛合金材料作为基体材料制作的等离子喷涂羟基磷灰石涂层－钛基牙种植体。
Plasma sprayed hydroxyapatite coated titanium dental implants
- ICS
- 11.060.10
- CCS
- C33
- 发布
- 2023-09-05
- 实施
- 2026-09-15
本文件规定了用于永久封闭牙齿根管的牙科根管封闭材料的性能要求和试验方法。本文件适用于如下根管封闭材料，即可在潮湿或无潮湿环境下固化、可结合牙根管充填尖使用或不结合牙根管充填尖单独使用，并且正向充填的牙根管封闭材料（即从牙齿冠部进行根管充填）。
Dental root canal sealing materials
- ICS
- 11.060.10
- CCS
- C33
- 发布
- 2023-09-05
- 实施
- 2026-09-15
本文件规定了符合ISO 24234或ISO 20749的牙科银汞合金产品的缝隙腐蚀导致的强度降低的允许要求，提供了确定该项试验方法的详细信息。
Corrosion resistance of dental amalgam in dentistry
- ICS
- 11.060.10
- CCS
- C33
- 发布
- 2023-09-05
- 实施
- 2024-09-15
Dentistry — Pre-capsulated dental amalgam
- ICS
- 11.060.10
- CCS
- 发布
- 2023-06
- 实施
- 2023-06
BS EN ISO 6872. Dentistry. Ceramic materials
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05-17
- 实施
- 2023-05-17
Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting materials, fissure sealants and orthodontic bonding or luting materials
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05
- 实施
Dentistry — Water-based cements — Part 1: Part 1: Powder/liquid acid-base cements
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05
- 实施
Dentistry — Evaluation of biocompatibility of medical devices used in dentistry
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05
- 实施
Dentistry — Polymer-based crown and veneering materials
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05
- 实施
Dentistry — Pre-capsulated dental amalgam
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05
- 实施
- 2023-05
This document specifies the requirements and test methods for sterilized absorbent points used in endodontic procedures. Absorbent points are marketed sterilized or non-sterilized. The requirements apply to absorbent points which have been sterilized once in a manner approved by the manufacturer. This document specifies numerical systems and a colour-coding system for designating the sizes of absorbent points. Clause 7 specifies the labelling and packaging needed, including the instructions for use. A claim by the manufacturer that the contents of the unopened pack are sterile is the responsibility of the manufacturer (see Table 2). This document does not specify requirements or test methods for sterility. NOTE 1 Reference to applicable national regulations can be made. Reference is made to internationally accepted pharmacopoeia. NOTE 2 National requirements can apply. Standards on methods of validating sterilization processes are also available: ISO 11137-1, ISO 11137-2
Dentistry — Endodontic absorbent points
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05
- 实施
- 2023-05
Dentistry — Test methods for tensile bond strength to tooth structure
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05
- 实施
- 2023-05
This document specifies the characteristics of polymer-based composite machinable blanks with respect to the milling process and provides the test methods that address the clinical issues specific to those materials. In addition, this document specifies the items to be described on the packaging and materials, as well as descriptions to be included in the instructions for use. The polymer-based composite machinable blanks covered in this document are blanks that are used for fabricating permanent dental restorative appliances (e.g. single crowns or inlays) by milling processes. They do not include large-sized blanks (e.g. discs) that allow for the fabrication of two or more units of crowns or bridges from one blank or materials for temporary use.
Dentistry — Polymer-based composite machinable blanks
- ICS
- 11.060.10
- CCS
- 发布
- 2023-05
- 实施
- 2023-05
主要规定了范围、规范性引用文件、术语和定义、材料、制造、要求和试验方法等内容。
Surgical guides for dental implant
- ICS
- 11.060.10
- CCS
- C2770
- 发布
- 2023-04-28
- 实施
- 2023-04-28
Dentistry — Test methods for tensile bond strength to tooth structure
- ICS
- 11.060.10
- CCS
- 发布
- 2023-04
- 实施
- 2023-04
1 Scope This document specifies the requirements for acrylic hard type materials used as chairside denture base relining materials and the test methods to determine compliance with these requirements. This document also specifies requirements for packaging and marking the products and for the instructions for use to be supplied by the manufacturer. Dentures which are relined by chairside denture base relining materials specified by this document are limited to those of acrylic. This document is not applicable to either denture base relining materials that are for laboratory use or soft lining materials. NOTE 1 Acrylic hard type materials contain acrylic and methacrylic monomers such as acrylic acid esters and substituted (meth)acrylic acid esters and their polymers. NOTE 2 Acrylic dentures are made of polymers such as poly (acrylic acid esters), poly (substituted acrylic acid esters) and rubber-modified poly (methacrylic acid esters).
Dentistry. Chairside denture base relining materials - Hard type materials
- ICS
- 11.060.10
- CCS
- 发布
- 2023-03-31
- 实施
- 2023-03-31
