11.060.20 牙科设备 标准查询与下载
共找到 1150 条与 牙科设备 相关的标准，共 77 页
Orthodontics Twin-Block Functional Orthodontics Technical Operation Procedures
- ICS
- 11.060.20
- CCS
- C 33
- 发布
- 2022-09-16
- 实施
- 2022-10-30
This document specifies the requirements and test methods for mobile dental units and dental patient chairs that is intended to be used within a permanent healthcare facility regardless of whether they are or not electrically powered. This document also specifies the requirements for the instructions for use, for the technical description, for marking and for packaging. Operator's stools, stationary dental equipment, other types of mobile dental equipment, portable dental equipment and operating lights are not in the scope of this document.
Dentistry — Mobile dental units and dental patient chairs — Part 1: General requirements
- ICS
- 11.060.20
- CCS
- 发布
- 2022-09-07
- 实施
This document specifies the requirements and test methods for mobile dental units concerning: a) the properties of mobile dental unitconnections to the compressed air supply, water supply, suction supply, and wastewater drain plumbing, b) the materials, design, and construction of the compressed air and water system within the mobile dental unit, c) the quality for incoming water and air, d) the performance of mobile dental unit suction system, and e) the air, water, suction and wastewater properties of mobile dental unitconnections to the interfaces to dental handpieces. This document also specifies requirements for instructions for use and a technical description. This document is only applicable to mobile dental units that are not used for oral surgery treatment requiring sterile air and water supplies. Amalgam separators are not included in this document.
Dentistry — Mobile dental units and dental patient chairs — Part 2: Air, water, suction and wastewater systems
- ICS
- 11.060.20
- CCS
- 发布
- 2022-09-07
- 实施
本文件确立了手动牙刷制造业绿色工厂的评价原则，规定了评价指标及要求，确立了评价程序，并规定了评价报告的内容。
Requirements for assessment of green factory in manual toothbrush manufacturing industry
- ICS
- 11.060.20
- CCS
- C411
- 发布
- 2022-08-11
- 实施
- 2022-08-11
本文件规定了手动牙刷绿色设计产品评价的评价要求，描述了产品生命周期评价报告编制方法和评价方法。
Technical specification of green-design product assessment—Manual toothbrush
- ICS
- 11.060.20
- CCS
- C411
- 发布
- 2022-08-11
- 实施
- 2022-08-11
本文件规定了注胶毛牙刷的安全、感官质量和规格尺寸等要求，描述了相应的试样状态调节与试验环境、试验方法，规定了检验规则、标志、包装、运输和贮存的内容，并给出了便于技术规定的产品分类。
Toothbrushes with molded bristle
- ICS
- 11.060.20
- CCS
- C411
- 发布
- 2022-08-11
- 实施
- 2022-08-11
BS EN ISO 4865. Dentistry. General requirements of non-hinged hand instruments
- ICS
- 11.060.20
- CCS
- 发布
- 2022-07-21
- 实施
- 2022-07-21
This document specifies requirements and test methods for stationary dental units concerning a) the properties of stationary dental unit connections to the compressed air supply, water supply, suction supply, and wastewater drain plumbing, b) the materials, design, and construction of the compressed air and water system within the stationary dental unit, c) the quality for incoming water and air, d) the performance of stationary dental unit suction system, and e) the air, water, suction and wastewater properties of stationary dental unit connections to the interfaces to dental handpieces. This document also specifies requirements for instructions for use and technical description. This document does not specify requirements or test methods for the effectiveness of stationary dental unit waterline biofilm control. NOTE Test methods for the effectiveness of stationary dental unit waterline biofilm control are specified in This document is only applicable to stationary dental units that are not used for oral surgery treatment requiring sterile air and water supplies. Amalgam separators are not included in this document.
Dentistry — Stationary dental units and dental patient chairs — Part 2: Air, water, suction and wastewater systems
- ICS
- 11.060.20
- CCS
- 发布
- 2022-07-01
- 实施
本文件规定了光固化机辐照度测试方法的光固化机分类、应用、取样、试验方法。 本文件适用于采用石英钨卤素灯和发光二极管（LED）灯为光源的光固化机的辐照度测试。 本文件不适用于激光或等离子弧设备，不适用于牙科技工室使用的，用于间接修复体、贴面、义齿 和其他口腔制品的光固化机。
Dentistry—Test method for irradiance of powered polymerization activator
- ICS
- 11.060.20
- CCS
- M745
- 发布
- 2022-06-10
- 实施
- 2022-06-10
Nominal diameter and designation of dental rotary instruments
- ICS
- 11.060.20
- CCS
- 发布
- 2022-05-18
- 实施
- 2023-06-01
Rods for dental rotary and reciprocating instruments
- ICS
- 11.060.20
- CCS
- 发布
- 2022-05-18
- 实施
- 2023-06-01
Dental endodontic instruments Part 1: General requirements
- ICS
- 11.060.20
- CCS
- 发布
- 2022-05-18
- 实施
- 2023-06-01
Dental digital impression machine
- ICS
- 11.060.20
- CCS
- 发布
- 2022-05-18
- 实施
- 2024-06-01
Dental extraction forceps part 1: general requirements
- ICS
- 11.060.20
- CCS
- 发布
- 2022-05-18
- 实施
- 2023-06-01
This document specifies requirements and test methods for central compressed air source equipment supplying dental air for dental units and various dental air consuming devices in the dental office. It also specifies quality requirements and test methods for the dental air produced by the central compressed air source equipment, such as requirements for the purity level of dental air. It also specifies requirements for information to be supplied by the manufacturer on the performance, installation, operation and maintenance of the central compressed air source equipment. This document applies only to central compressed air source equipment located outside of the dental treatment room. This document does not apply to central compressed air source equipment located in the dental treatment room and facility piping. This document does not include requirements for dental laboratory applications (e.g. CAD/CAM systems).
Dentistry — Central compressed air source equipment
- ICS
- 11.060.20
- CCS
- 发布
- 2022-05-12
- 实施
This document specifies requirements and test methods for spoons and bone curettes used in dentistry for oral surgical procedures. It specifies shapes and dimensions as well as information for marking.
Dentistry — Spoons and bone curettes
- ICS
- 11.060.20
- CCS
- 发布
- 2022-05-12
- 实施
This document specifies stainless steel commonly used in manufacturing dental instruments. It is applicable to stainless steel materials used to manufacture either an entire instrument or a part of the instrument. It is applicable to single-use and reusable dental instruments, whether it is or it is not connected to a power-driven system. This document is not applicable to devices and instruments used long-term in the mouth of the patient (e.g. crown, bridges, implants) or to devices and instruments not made of stainless steel. It contains a current selection of stainless steels suitable for use in the manufacture of dental instruments.
Dentistry — Materials for dental instruments — Part 1: Stainless steel
- ICS
- 11.060.20
- CCS
- 发布
- 2022-05-12
- 实施
Dentistry — Central compressed air source equipment
- ICS
- 11.060.20
- CCS
- 发布
- 2021-12-28
- 实施
