11.080.20 消毒剂和防腐剂 标准查询与下载
共找到 273 条与 消毒剂和防腐剂 相关的标准，共 19 页
1.1 This test method is designed to determine the activity of healthcare personnel hand rubs, (also known as hand rubs, hygienic hand rubs, hand sanitizers, or hand antiseptics) against transient microbial skin flora on the hands after a single application and after repeated applications. 1.2 Performance of this procedure requires the knowledge of regulations pertaining to the protection of human subjects (see 21 CFR Parts 50 and 56). 1.3 This test method should be performed by persons with training in microbiology, in facilities designed and equipped for work with potentially infectious agents at biosafety level
Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Healthcare Personnel Hand Rub Formulations Using Hands of Adults
- ICS
- 11.080.20
- CCS
- 发布
- 2022-04-01
- 实施
本文件规定了免洗手消毒凝胶（以下简称“凝胶”）的基本要求、技术要求、试验方法、检验规则、使用方法、标识、包装、运输和贮存以及质量承诺。 本文件适用于以乙醇或异丙醇为杀菌有效成分，以水为溶剂，以卡波姆或纤维素为凝胶剂制成的用于手皮肤消毒的免洗消毒凝胶。
Waterless hand disinfectant gel
- ICS
- 11.080.20
- CCS
- C268
- 发布
- 2022-03-28
- 实施
- 2022-04-08
GB/T 601-2016 化学试剂标准滴定溶液的制备 GB/T 602 化学试剂杂质测定用标准溶液的制备 GB/T 603 化学试剂试验方法中所用制剂及制品的制备 GB/T 6682-2008 分析实验室用水规格和试验方法 GB/T 6678 化学试剂化工产品采样总则 GB/T 191 包装储运图示标志 GB/T 8170-2008 数值修约规则与极限数值的表示和判定 GB/T 3050-2000 无机化工产品中氯化物含量测定的通用方法电位滴定法 HG/T 5738-2020 工业过一硫酸氢钾复合盐 GB/T 21058 无机化工产品中汞含量测定的通用方法无火焰原子吸收光谱法 GB/T 23946 无机化工产品中铅含量测定通用方法原子吸收光谱法 GB/T 23947 无机化工产品中砷测定的通用方法 《化妆品安全技术规范》（2015 年版） 国家食品药品监督管理总局（2015）268 号公告 消毒技术规范（2002 年版） 卫生部[卫法监发（2002）282 号] GB/T 38502-2020 消毒剂实验室杀菌效果检验方法 GB/T 38598-2020 消毒产品标签说明书通用要求 GB/T 38496-2020 消毒剂安全性毒理学评价程序和方法 GB/T 38499-2020 消毒剂稳定性评价方法 WS 628-2018 消毒产品卫生安全评价技术要求 消毒产品卫生安全评价规定国家卫计委[国卫监发（2014）36 号] 《消毒产品生产企业卫生规范》（2009 年版） 卫生部[卫监发（2009）53 号] GB/T 38502-2020 消毒剂良好生产规范
General technical criteria of potassium bisulfate disinfectant
- ICS
- 11.080.20
- CCS
- M7590
- 发布
- 2021-12-14
- 实施
- 2021-12-14
DIN EN 12353:2021 化学消毒剂和防腐剂. 用于测定杀菌(包括军团菌属), 杀分枝杆菌, 杀孢子, 杀霉菌, 杀病毒(包括噬菌体)活性的试验菌的保存; 德文版本EN 12353-2021
This European Standard specifies methods for keeping test organisms used and defined in European Standards for the determination of bactericidal (incl. Legionella pneumophila), mycobactericidal, sporicidal, fungicidal and virucidal (incl. bacteriophages) activity of chemical disi
Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity; German version EN 12353:
- ICS
- 11.080.20
- CCS
- C19
- 发布
- 2021-11-01
- 实施
1.1 This guide covers the methods for determining the death rate kinetics expressed as D-values. These values can be derived from the construction of a kill curve (or survivor curve) or by using other procedures for determining the number of survivors after exposure to antimicrobial chemicals or formulations. Options for calculations will be presented as well as the method for calculation of a concentration coefficient. 1.1.1 The test methods are designed to evaluate antimicrobial agents in formulations to define a survivor curve and to subsequently calculate a D-value. The tests are designed to produce data and calculate values that provide basic information of the rate-of-kill of antimicrobial formulations tested against single, selected microorganisms. In addition, calculated D-values from survivor curves from exposure at different dilutions of antimicrobial can be used to show the effect of dilution by calculation of the concentration exponent, η (2). D-value determination assumes the ideal of first-order killing reactions that are reflected in a straight-line reduction in count where a count-versus-time plot is done. The goal here is not to determine the time at which no survivors are found, but to determine a standard value that can be used in processing and exposure determinations or used to estimate dilutions. 1.1.2 As an example of potential use of kill curve data, the published FDA, OTC Tentative Final Monograph for HealthCare Antiseptic Drug Products, Proposed Rule, June 17, 1994 has suggested the testing of topically applied antimicrobial products using survival curve (or kill curve) calculations. The methods described in this guide are applicable to these products, but adjustments such as the use of antifoaming agents when the reaction mixture is stirred may be necessary to counteract the presence of detergents in many formulations. Frequently the sampling for these tests is done after very short intervals of exposure to the formulation, such as 30 and 60 s. This methodology also has been applied to preservative testing of antimicrobial ingredients in more complex cosmetic formulations (5). 1.2 The test methods discussed should be performed only by those trained in microbiological techniques. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 This guide is under the jurisdiction of ASTM Committee E35 on Pesticides, Antimicrobials, and Alternative Control Agents and is the direct responsibility of Subcommittee E35.15 on Antimicrobial Agents. Current edition approved Oct. 1, 2021. Published October 2021. Originally approved in 1997. Last previous edition approved in 2015 as E1891 – 10a(2015). DOI: 10.1520/E1891-21. 2 The boldface numbers given in parentheses refer to a list of references at the end of the text. E1891 − 21 2 2. Referenced Documents
Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
- ICS
- 11.080.20
- CCS
- 发布
- 2021-10-01
- 实施
This European Standard specifies a test method and the minimum requirements for bactericidal and/or yeasticidal and/or fungicidal activity of chemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hard water - or in the case of rea
Chemical disinfectants and antiseptics - Quantitative test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants in the medical area on non-porous surfaces without mechanical action - Test method and requi
- ICS
- 11.080.20
- CCS
- 发布
- 2021-10-00
- 实施
Chemical disinfectants and antiseptics - Quantitative test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants in the medical area on non-porous surfaces without mechanical action - Test method and requi
- ICS
- 11.080.20
- CCS
- 发布
- 2021-09-30
- 实施
- 2021-09-30
Chemical disinfectants and antiseptics – Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
- ICS
- 11.080.20
- CCS
- 发布
- 2021-09-09
- 实施
- 2021-09-09
Chemical disinfectants and antiseptics. Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
- ICS
- 11.080.20
- CCS
- C10
- 发布
- 2021-09-01
- 实施
- 2021-09-01
Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
- ICS
- 11.080.20
- CCS
- 发布
- 2021-09-00
- 实施
- 2021-09-01
Chemical disinfectants and antiseptics - Quantitative test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants in the medical area on non-porous surfaces without mechanical action - Test method and requi
- ICS
- 11.080.20
- CCS
- 发布
- 2021-09-00
- 实施
- 2021-09-01
Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
- ICS
- 11.080.20
- CCS
- 发布
- 2021-09-00
- 实施
Chemical disinfectants and antiseptics. Quantitative test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants in the medical area on non-porous surfaces without mechanical action. Test method and require
- ICS
- 11.080.20
- CCS
- 发布
- 2021-08-18
- 实施
- 2021-08-18
Chemical disinfectants and antiseptics - Quantitative test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants in the medical area on non-porous surfaces without mechanical action - Test method and requi
- ICS
- 11.080.20
- CCS
- 发布
- 2021-08-00
- 实施
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- 发布
- 2021-07-00
- 实施
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants in the medical area - Test method and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- 发布
- 2021-04-22
- 实施
- 2021-04-22
本标准主要技术内容包含了感官指标、性能指标、有害物质限值、安全性、稳定性、杀灭微生物效果、恶臭污染物限值、金属腐蚀性、用量等方面的要求。
Slightly acidic hypochlorous acid water for centralized collection and transportation of domestic waste
- ICS
- 11.080.20
- CCS
- C266
- 发布
- 2021-04-16
- 实施
- 2021-07-27
1.1?These test procedures are used to determine the effectiveness of methodologies procedures and materials intended for inactivating (neutralizing, quenching) the microbicidal properties of antimicrobial agents; to ensure that no components of the neutralizing procedures and ma
Standard Test Practices for Evaluation of Inactivators of Antimicrobial Agents
- ICS
- 11.080.20
- CCS
- 发布
- 2021-04-01
- 实施
Standard Practices for Evaluation of Inactivators of Antimicrobial Agents
- ICS
- 11.080.20
- CCS
- 发布
- 2021-04-01
- 实施
1 范围 本标准规定了乙醇消毒剂（气雾剂型）的要求、试验方法、应用范围、使用方法、检验规则、标志、包装、运输和贮存。 本标准适用于在铁（铝）制气雾罐内填充了抛射剂和 75 %（v/v）乙醇原料的气雾剂型乙醇消毒剂。 2 规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。 GB/T 2828.1—2012 计数抽样检验程序 第1部分：按接收质量限（AQL）检索的逐批检验抽样计划 GB/T 2829—2002 周期检验计数抽样程序及表（适用于对过程稳定性的检验） GB 13042 包装容器 铁质气雾罐 GB/T 14449—2017 气雾剂产品测试方法 GB/T 17447 气雾阀 GB/T 25164 包装容器25.4 mm口径铝气雾罐 GB 26373—2020 醇类消毒剂卫生要求 GB 27949 医疗器械消毒剂通用要求 GB 27950 手消毒剂通用要求 GB 27951 皮肤消毒剂卫生要求 GB 27952 普通物体表面消毒剂通用要求 GB 28644.2 危险货物有限数量及包装要求 GB 30000.4 化学品分类和标签规范 第4部分：气溶胶 GB 31640 食品安全国家标准 食用酒精 BB/T 0005 气雾剂产品的标示、分类及术语 BB/T 0006 包装容器20 mm口径铝气雾罐 QB 2549—2002 一般气雾剂产品的安全规定 JJF 1070 定量包装商品净含量计量检验规则 WS 310.2 医院消毒供应中心 第2部分：清洗消毒剂灭菌技术操作规范 T/CAS 420—2020 车用零部件溶剂清洗气雾剂（轻垢型）
Ethanol-based disinfectant (Aerosol type)
- ICS
- 11.080.20
- CCS
- C2770
- 发布
- 2021-02-05
- 实施
- 2021-07-22
