13.020.30 环境影响评定 标准查询与下载

SN EN ISO 14091:2021 适应气候变化 脆弱性、影响和风险评估指南（ISO 14091:2021）

Adaptation to climate change - Guidelines on vulnerability, impacts and risk assessment (ISO 14091:2021)

ISO 23731:2021 海洋技术.海洋环境影响评估（MEIA）.深海底环境中原位图像调查的性能规范

This document specifies minimum requirements and provides recommendations for the gathering of image-based data at seafloor where epifauna and benthopelagic fauna with a minimum dimension of 1 cm are used as a proxy for the status of the biological community.

Marine technology - Marine environment impact assessment (MEIA) - Performance specification for in situ image-based surveys in deep seafloor environments

DIN EN ISO 14091:2021 适应气候变化 脆弱性、影响和风险评估指南（ISO 14091:2021）；德文版 EN ISO 14091:2021

This International Standard provides guidance for assessing the risks related to the impacts of climate change. It describes how to understand vulnerability and how to develop and implement a sound risk assessment and is applicable for assessing both present and future climate ch

Adaptation to climate change - Guidelines on vulnerability, impacts and risk assessment (ISO 14091:2021); German version EN ISO 14091:2021

ISO 23734:2021 海洋技术.海洋环境影响评估（MEIA）.使用微藻延迟荧光监测海水质量的船上生物测定

This document specifies a bioassay for the determination of the presence of unknown toxic contaminants in test seawater (see Figure A.1). It is based on the inhibition of photosynthetic activity of the marine cyanobacterium Cyanobium sp. (NIES-981) by such toxic contaminants. The inhibition is determined based on delayed fluorescence (DF) intensity. The method is rapid and requires less laboratory space than standard bioassays. Hence, it can be used on-board to generate basic data for seawater quality management at deep-sea mining sites where time and space are extremely limited.

Marine technology - Marine environment impact assessment (MEIA) - On-board bioassay to monitor seawater quality using delayed fluorescence of microalga

DB11/T 1820-2021 街区层面控制性详细规划环境影响评价技术指南

Technical Guidelines for Environmental Impact Assessment of Regulatory Detailed Planning at the Block Level

DB11/T 1821-2021 建设项目环境影响评价技术指南 生物药品制品制造

Technical Guidelines for Environmental Impact Assessment of Construction Projects Manufacturing of Biopharmaceutical Products

JIS C 4441:2021 电能存储(EES)系统. 电网集成电能存储(EES)系统的安全要求. 电化学系统

Electrical energy storage (EES) systems -- Safety requirements for grid-integrated EES systems -- Electrochemical-based systems

DS/EN ISO 14091:2021 适应气候变化 脆弱性、影响和风险评估指南（ISO 14091:2021）

Adaptation to climate change – Guidelines on vulnerability, impacts and risk assessment (ISO 14091:2021)

BS EN ISO 14091:2021 适应气候变化-脆弱性、影响和风险评估指南

Adaptation to climate change. Guidelines on vulnerability, impacts and risk assessment

NF X30-371:2021 适应气候变化 脆弱性、影响和风险评估指南

Adaptation to climate change - Guidelines on vulnerability, impacts and risk assessment

EN ISO 14091:2021 适应气候变化-脆弱性、影响和风险评估指南

Adaptation to climate change - Guidelines on vulnerability, impacts and risk assessment (ISO 14091:2021)

T/CAOE 27-2021 海洋工程生态评估导则

本标准规定了海洋工程生态评估的原则、程序、内容和方法等。

Guidelines for ecological assessment of marine engineering

T/CAOE 26-2021 海洋生态本底调查与评价规范

本标准规定了海洋生态本底调查与评价的一般规定、内容、方法和成果等要求。

Specification for investigation and assessment of marine ecosystem background

DS/ISO 14091:2021 适应气候变化 脆弱性、影响和风险评估指南

Adaptation to climate change – Guidelines on vulnerability, impacts and risk assessment

ISO 14091:2021 适应气候变化-脆弱性、影响和风险评估指南

This document gives guidelines for assessing the risks related to the potential impacts of climate change. It describes how to understand vulnerability and how to develop and implement a sound risk assessment in the context of climate change. It can be used for assessing both present and future climate change risks. Risk assessment according to this document provides a basis for climate change adaptation planning, implementation, and monitoring and evaluation for any organization, regardless of size, type and nature.

Adaptation to climate change - Guidelines on vulnerability, impacts and risk assessment

T/CGDF 00001-2021 建设用地土壤重金属污染风险管控评估标准

本标准规定了建设用地土壤重金属污染风险管控评估的原则、工作内容和程序及技术要求等。 前  言　II 1适用范围　1 2规范性引用文件　1 3术语和定义　2 4基本原则　3 5工作内容和程序　3 6初期准备　5 7实地采样调查　6 8样品检测分析　8 9风险管控评估　8 10 组织监督评估　14 11编制评估报告　15 附录A（资料性附录）调查信息表　16 附录B（资料性附录）社会公众调查问卷　20 附录C（资料性附录）重金属毒性响应系数值　22 附录D（资料性附录）配对样本T检验　23 附录E（资料性附录）层次分析法基本步骤　24 附录F（资料性附录）建设用地土壤重金属污染风险管控评估报告编制说明　29

Standard for Verification of Risk Management and Control of Soil Contaminated by Heavy Metals: Land for construction

ANSI/ASHRAE 188-2021 军团菌病: 建筑用水系统的风险管理

Legionellosis: Risk Management for Building Water Systems

PNS ISO 14091:2021 适应气候变化——脆弱性、影响和风险评估指南

Adaptation to climate change - Guidelines on vulnerability, impacts and risk assessment

ASTM E2616-09(2020) 补救选择标准指南整合基于风险的纠正措施和非风险注意事项

1.1 This guide covers the selection of appropriate remedial actions at sites where a release of chemicals (for example, vapor-phase, dissolved-phase, or non-aqueous phase liquids (NAPL)) into the environment has occurred. This overall remedy selection process is illustrated in Fig. 1. The guide is intended to be applied within a risk-based corrective action (RBCA) framework. 1.2 The purpose of this guide is to facilitate the selection of acceptable remedial actions and to minimize bad decisions leading to the selection of remedial actions that do not satisfy both the risk-based remedial action objectives and the non-risk remedial action objectives. 1.3 This guide is intended to be applied at sites that require a remedial action to address unacceptable human heath or ecological risks, other regulatory requirements, and/or other unacceptable site conditions. Prior to use of this guide, a site assessment should be completed resulting in: (1) the establishment of remedial action objectives, (2) a determination that a remedial action is required to achieve the remedial action objectives, (3) an identification of site areas requiring a remedial action, and (4) a conceptual site model that reflects the results of the site assessment. The risk-based remedial action objectives are assumed to have been established using RBCA or another risk-based assessment method that results in the identification of appropriate remedial action objectives based on an evaluation of sources, exposure pathways, and potential receptors. Remedial action objectives may be established using Guide E1739, Guide E2081, and/or Guide E2205. In addition, applicable federal, state, and local regulations, statutes, and policies should be followed and should form the basis for determining risk-based and non-risk remedial action objectives. The remedial action objectives may include resource protection standards and the prevention of aesthetic or nuisance impacts in addition to protection of human health and the environment. 1.4 Each risk-based remedial action objective for an exposure pathway will typically include numeric remedial action levels for each chemical of concern (COC). Remedial action levels may also be developed for non-risk remedial action objectives such as resource protection standards. The non-risk remedial action levels may include thickness or mobility criteria for NAPL. The selected remedy must be effective and timely for each remedial action objective based on the consideration of the associated exposure pathway or resource protection standard. 1.5 To facilitate the selection of acceptable remedial actions, this guide establishes a process for remedy selection (Fig. 2) that involves: 1.5.1 Development of risk-based remedial action objectives that includes identification of complete exposure pathways and numeric remedial action levels (Section 5). 1.5.2 Development of non-risk remedial action objectives based on resource protection and other non-risk considerations. Resource protection objectives typically include numeric remedial action levels while other non-risk criteria are typically non-numeric and may include: remediation timeframe, implementability, cost effectiveness, regulatory compliance, property use requirements, liability control, and community concern (Section 5). 1.5.3 Evaluation of protectiveness to identify protective remedial actions that will be effective and timely for each risk-based remedial action objective for the site (Section 6). 1.5.4 Evaluation of the retained remedies using the non-risk remedial action objectives to identify acceptable remedial actions that satisfy the minimum level for each non-risk criterion (Section 7). 1.5.5 Remedial action selection to select the acceptable remedial action to be implemented at the site (Section 8). 1.5.6 Remedy design and implementation to ensure that the selected remedy is effectively implemented at the site and satisfies the remedial action objectives (Section 9). 1.6 This guide is intended for use in the selection of final remedial actions. This guide may also be used in the selection of interim measures provided that risk-based remedial action objectives and non-risk remedial action objectives are available for the evaluation of these interim measures. 1 This guide is under the jurisdiction of ASTM Committee E50 on Environmental Assessment, Risk Management and Corrective Action and is the direct responsibility of Subcommittee E50.04 on Corrective Action. Current edition approved Nov. 1, 2020. Published November 2020. Originally approved in 2009. Last previous edition approved in 2014 as E2616–09(2014). DOI: 10.1520/E2616-09R20. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 1.7 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.8 This guide is not intended to specifically address contractor health and safety issues. It is the responsibility of the user of this guide to ensure that Occupational Safety and FIG. 1 Remedy Selection Process E2616 − 09 (2020) 2 FIG. 2 Remedy Selection Flowchart E2616 − 09 (2020) 3 FIG. 2 Remedy Selection Flowchart (continued) E2616 − 09 (2020) 4 Health Administration (OSHA) regulatory requirements are met, and appropriate industry practices are consulted for guidance. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Remedy Selection Integrating Risk-Based Corrective Action and Non-Risk Considerations

KS C IEC TS 62933-3-1-2020 电能存储（EES）系统第3-1部分:电能存储系统的规划和性能评估通用规范

Electrical energy storage(EES) systems —Part 3-1: Planning and performance assessment of electrical energy storage systems — General specification