13.020.30 环境影响评定 标准查询与下载

EN IEC 62933-2-1:2018 电能存储（EES）系统 第 2-1 部分：单元参数和测试方法 通用规范

Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification

PD CEN/TS 15119-1:2018 木材和木制品的耐久性 防腐处理木材向环境排放的测定 第1部分：处理后存放在堆场的木材和暴露在使用类别 3 中的木制商品（未覆盖 未接触 wi

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered@ not in contact wi

MZ/T 106-2017 火葬场二噁英类污染物减排技术导则

Technical Guidelines for Reducing Emissions of Dioxin-Like Pollutants from Crematoriums

DB35/T 1725-2017 环境损害鉴定评估通用规范

本标准规定了环境损害鉴定评估的术语和定义、工作原则、通用程序、准备、勘查、鉴定及评估的方法和要求。 本标准适用于因污染环境或破坏生态行为（包括突发环境事件）导致人身、财产、生态环境损害、应急处置费用和其他事务性费用的鉴定评估。 本标准不适用于因核与辐射所致环境损害的鉴定评估。

General specification for environmental damage identification and assessment

IEC 62933-2-1:2017 电能存储（EES）系统 第2-1部分:单元参数和测试方法 总规范

This part of IEC 62933 focuses on unit parameters and testing methods of EES systems. The energy storage devices and technologies are outside the scope of this document. This document deals with EES system performance defining: unit parameters@ testing methods.

Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification

DB45/T 1625-2017 地质灾害危险性评估规程

Regulations on Risk Assessment of Geological Hazards

DB35/T 1692-2017 水利风景区评价标准

本标准规定了水利风景区评价的内容和方法。 本标准适用于福建省内现有及拟申报的省级、县级水利风景区的评价。

Evaluation Standards for Water Conservancy Scenic Spots

GSO IEC/TR 62725:2017 电气电子产品和系统温室气体排放量化方法分析

This Technical Report is intended to provide users with guidance to understand methodologies and to evaluate carbon footprint of products (hereinafter referred to as CFP), by quantifying the greenhouse gases (GHG) emissions (hereinafter referred to as CFP study) for Electrical and Electronic products (hereinafter referred to as EE products) based on life-cycle thinking. This TR is applicable to any type of EE products, which are new or modified (e.g. reconditioned, upgraded, etc.). This TR is based on the result of a comparative study on existing methodologies published or under discussion in representative international organizations. This TR is intended to be used by those involved in design and development of EE products, and their supply chains regardless of industry sectors, regions, types, activities and sizes of organizations. This TR may also be used as guidance to prepare a PCR of each product category in EE sector. NOTE 1 In this TR, ISO/DIS 14067, ITU-T L.1400 and L.1410, GHG Protocol Product Life Cycle Accounting and Reporting Standard (hereinafter referred to as (GHG Protocol Product Standard), BSI PAS 2050, and other international, regional and national initiatives are studied and compared since these documents and initiatives are regarded as the most influential ones worldwide at the moment. NOTE 2 This TR refers to requirements relevant to EE products in the existing documents and quotes them with boxes. The boxes are followed by guidance applicable to EE products. The documents which this TR refers to (e.g. ISO/DIS 14067) may be revised in the future. These boxes do not capture the full text of the standards referred to and readers are encouraged to read these standards for thorough understanding of their requirements. NOTE 3 This TR is programme-neutral. If a programme (e.g. a specific Carbon Footprint of Products (CFP) Initiative) is applicable, some requirements of that programme may be additional to the guidance provided in this TR.

Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems

GSO IEC/TR 62635:2017 制造商和回收商提供的报废信息以及电气和电子设备可回收率计算指南

IEC/TR 62635, which is a technical report, provides a methodology for information exchange involving EEE manufacturers and recyclers, and for calculating the recyclability and recoverability rates to • provide information to recyclers to enable appropriate and optimized EoL treatment operations, • provide sufficient information to characterize activities at EoL treatment facilities in order to enable manufacturers to implement effective ECD, • evaluate the recyclability and recoverability rates based on product attributes and reflecting real end-of-life practices. Furthermore this technical report includes: • criteria to describe EoL treatment scenarios; • criteria to determine product parts that might require removal before material separation and related information to be provided by manufacturers (location and material composition); • a format for information describing EoL scenarios and the results of EoL treatment activities; • a method for calculating the recyclability and recoverability rate of EEE. The calculation is limited to EoL treatment and does not cover collection. The recyclability rate is expressed as a percentage of the mass of the product that can be recycled or reused, whereas the recoverability rate in addition includes a portion derived from energy recovery. This techncial report can be applied to all electrical and electronic equipment; • some example data corresponding to identified scenarios provided in Annex D.

Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic equipment

IEC TS 62933-4-1:2017 电能存储（EES）系统.第4-1部分:环境问题指南.一般规范

Electrical energy storage (EES) systems - Part 4-1: Guidance on environmental issues - General specification

IEC TS 62933-5-1:2017 电能存储（EES）系统第5-1部分:电网集成EES系统的安全考虑通用规范

Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification

GSO 2540:2017 石油天然气行业 项目环境影响评价

This document outlines the procedure necessary to prepare the required Environmental Screening and Scoping (ESS) Statements, included in the Design Basis Scoping Papers (DBSPs) for major capital projects, and in the expenditure requests for BI-19 Miscellaneous Capital Items. This document also outlines the procedure necessary to prepare the required Environmental Impact Assessments (EIAs) for major projects and for master appropriations (such as drilling operations) and BI-19 projects with a significant environmental impacts. The primary objective of both the ESS Statement and the EIA is to document the scope of environmental issues very early in the project in order to consider project alternatives that would reduce or eliminate adverse impacts and resource conservation potential. The EIA should recommend appropriate, cost-effective measures, which will mitigate significant environmental impacts, and describe how implementation of these recommendations will be monitored during construction and operation.

Petroleum and natural gas industries - Project Environmental Impact Assessments

DB21/T 2724-2017 辽宁省河湖（库）健康评价导则

Guidelines for Health Evaluation of Rivers and Lakes (Reservoirs) in Liaoning Province

T/CACE 001-2016 全国循环经济科技成果评价指南 第1部分：技术研发类

全国循环经济科技成果评价内容一般包括： a)　技术创新程度、技术指标先进程度； b)　技术难度和复杂程度； c)　成果的重现性和成熟程度； d)　成果应用价值与效果； e)　取得的经济效益与社会效益； f)　进一步推广的条件和前景； g)　存在的问题及改进意见。

Guideline for evaluation of scientific and technological achievements of circular economy in China- Part1: Technology research and development

T/CACE 002-2016 全国循环经济科技成果评价指南 第2部分：软科学类

全国循环经济软科学科技成果评价内容一般包括： a)　技术创新程度、技术指标先进程度； b)　技术难度和复杂程度； c)　成果的重现性和成熟程度； d)　成果应用价值与效果； e)　取得的经济效益与社会效益； f)　进一步推广的条件和前景； g)　存在的问题及改进意见。

Guideline for evaluation of scientific and technological achievements of circular economy in China-Part2: soft science

T/CFA 030801-1-2016 绿色铸造企业评价规则

本标准评价指标：绿色铸造企业评价指标体系分值共计 1000 分，分为一级指标项〔企业规模（产能/产值）评价指标，技术经济评价指标，生产工艺、设备与材料评价指标，能源资源有效利用评价指标，污染物环境排放控制评价指标，职业健康安全绩效评价指标，企业现代管理评价指标〕 7 项；二级指标 31 项。

Evaluation index rules of green foundry enterprise

IEC 61882:2016 RLV 危险和可操作性研究（HAZOP研究）-应用指南

Hazard and operability studies (HAZOP studies) - Application guide

IEC 61882:2016 危险和可操作性研究（HAZOP研究）-应用指南

Hazard and operability studies (HAZOP studies) - Application guide

DB35/T 1536-2015 江河入海口水环境质量评价方法

本标准规定了江河入海口水环境质量监测和评价的技术方法。 本标准适用于福建省江河入海口水环境质量的常规性监测评价，在突发污染事故时应采用单因子污染指数评价。

Evaluation method of water environment quality in river estuaries

DB44/T 1772.1-2015 电动汽车用动力电池污染评定方法 第1部分：镍氢电池

本部分规定了电动汽车用镍氢动力单体蓄电池的污染值和污染度的评定项目、测定方法，以及污染度的评定等级的划分。 本部分适用于电动汽车用镍氢动力单体蓄电池对水体和土壤的污染评定，其它应用领域可参考使用。

Method for assessing pollution of traction batteries used in electric vehicles Part 1: Ni-MH batteries