13.020.60 产品寿命周期 标准查询与下载

ASTM D7887-20 “联合国绩效考核包装用替代 无害 液体填充物质标准指南”

1.1 This guide is intended to clarify the selection, use, and description criteria of non-hazardous liquid substitutes used to replace liquid hazardous materials on packagings designs being subjected to United Nations (UN) performance-oriented packaging certification as required by United States Department of Transportation Title 49 Code of Federal Regulations (49 CFR) and the United Nations Recommendations on the Transport of Dangerous Goods (UN). This includes identification of the physical parameters of substitute non-hazardous liquid test fill materials that may affect packaging performance and test results and should be considered when selecting and describing a test fill material that conforms to the requirements of the Hazardous Materials Regulations (HMR). 1.2 This guide provides information to assist packaging users, manufacturers, and performance testing service suppliers regarding the types of physical properties that should be considered when selecting substitute liquid filling substances for the testing, certification, and manufacture of packagings under the United Nations packaging protocols as adopted by US DOT in 49 CFR HMR.. 1.3 This guide provides the suggested minimum information concerning the physical characteristics of the filling substances that should be documented in the certification test report and notification to users to allow for test repeatability and analysis. Attention should be paid to the differences in physical characteristics of the substance used in the test compared to the materials transported. 1.4 This guide does not purport to address regulatory requirements regarding the compatibility of filling substances with transport packagings. Compatibility requirements must be assessed separately, but it should be noted that under certain national and international dangerous goods regulations, the selection of the filling substances for package performance testing may be prescribed with respect to chemical compatibility requirements. NOTE 1—Under the US HMR determination of packaging compatibility with a particular hazardous fill material is “the responsibility of the person offering the hazardous material for transportation” as prescribed in 49 CFR § 173.24(e). 1.5 The units of measurement are consistent with the HMR. 1.6 When testing packaging designs intended for hazardous materials (dangerous goods), the user of this guide shall be trained in accordance with 49 CFR §172.700 and other applicable hazardous materials regulations such as the ICAO Technical Instructions, IMDG Code, other applicable national or international dangerous goods regulations that govern the testing, manufacture and use of packagings authorized for the transportation of Dangerous Goods, and carrier rules such as the IATA Dangerous Goods Regulations. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests

ASTM G166-00(2020) 使用寿命数据统计分析的标准指南

1.1 This guide presents briefly some generally accepted methods of statistical analyses which are useful in the interpretation of service life data. It is intended to produce a common terminology as well as developing a common methodology and quantitative expressions relating to service life estimation. 1.2 This guide does not cover detailed derivations, or special cases, but rather covers a range of approaches which have found application in service life data analyses. 1.3 Only those statistical methods that have found wide acceptance in service life data analyses have been considered in this guide. 1.4 The Weibull life distribution model is emphasized in this guide and example calculations of situations commonly encountered in analysis of service life data are covered in detail. 1.5 The choice and use of a particular life distribution model should be based primarily on how well it fits the data and whether it leads to reasonable projections when extrapolating beyond the range of data. Further justification for selecting a model should be based on theoretical considerations. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Statistical Analysis of Service Life Data

ISO 14040:2006/Amd 1:2020 环境管理.生命周期评估.原则和框架.修改件1

Environmental management — Life cycle assessment — Principles and framework — Amendment 1

KS I ISO TS 14071-2019 环境管理 生命周期评估 严格评审流程和评审员能力：KS I ISO 14044:2011 的附加要求和指南

Environmental management — Life cycle assessment — Critical review processes and reviewer competencies: Additional requirements and guidelines to KS I ISO 14044:2011

T/CBMF 51-2019 产品生命周期评价技术规范 石材

本标准规定了石材产品生命周期评价的术语和定义、产品生命周期评价、Ⅲ型环境声明的内容。 本标准适用于天然石材及人造石产品。

Product life cycle assessment technical specification stone

T/CBMF 50-2019 产品生命周期评价技术规范 岩棉绝热制品

本标准规定了岩棉绝热制品产品生命周期评价的术语和定义、产品生命周期评价、Ⅲ型环境声明的内容。 本标准适用于岩棉类绝热制品。

Product Life Cycle Assessment Technical Specification for Rock Wool Insulation Products

T/CBMF 52-2019 产品生命周期评价技术规范 蒸压加气混凝土砌块和板

本标准规定了蒸压加气混凝土砌块和板产品生命周期评价的术语和定义、产品生命周期评价、Ⅲ型环境声明的内容。 本标准适用于民用与工业建筑物中使用的蒸压加气混凝土砌块和蒸压加气混凝土板。

Product life cycle assessment technical specification for autoclaved aerated concrete blocks and slabs

T/GDES 26-2019 碳足迹标识

4 标识的图形样式 4.1 标识含义 4.2 标识的规格 4.3 标注要求

Labels of carbon footprint

T/GDES 27-2019 水足迹标识

4 标识的图形样式 4.1 标识含义 4.2 标识的规格 4.3 标注要求

Labels of water footprint

ASTM E3106-18e1 基于科学和基于风险的清洁工艺开发和验证标准指南

Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation

ASTM E3106-18 基于科学和基于风险的清洁工艺开发和验证标准指南

Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation

T/CAB 0035-2018 绿色（生态）设计产品标识

本标准规定了绿色（生态）设计产品标识及其标注的基本原则和一般要求。

The labeling for eco-design product

T/CBMF 29-2018 产品生命周期评价技术规范 水泥

本标准规定了水泥产品生命周期评价的基本规则和要求。 本标准适用于通用硅酸盐水泥及熟料。

Product life cycle assessment technical specification for cement

T/CBMF 30-2018 产品生命周期评价技术规范 卫生陶瓷

本标准规定了卫生陶瓷产品生命周期环境足迹评价的基本规则和要求。 本标准适用于卫生陶瓷产品。

Product Life Cycle Assessment Technical Specification for Sanitary Ceramics

T/CBMF 32-2018 产品生命周期评价技术规范 干混砂浆

本标准规定了干混砂浆产品生命周期评价的基本规则和要求。 本标准适用于干混砂浆，包括但不限于附录A所列出的各类产品。

Product life cycle assessment technical specification for dry-mixed mortar

T/CBMF 33-2018 产品生命周期评价技术规范 预拌混凝土和湿拌砂浆

本标准规定了预拌混凝土和湿拌砂浆产品生命周期评价的基本规则和要求。 本标准适用于搅拌站（楼）生产的预拌混凝土产品及专业生产厂生产的湿拌砂浆产品。

Technical specification for product life cycle assessment ready-mixed concrete and wet-mixed mortar

T/CBMF 31-2018 产品生命周期评价技术规范 陶瓷砖（板）

本标准规定了陶瓷砖（板）产品生命周期评价的基本规则和要求。 本标准适用于陶瓷砖（板）产品。

Product Life Cycle Assessment Technical Specification for Ceramic Tiles (Boards)

ASTM E3027-18a 在产品生命周期中制定可持续发展相关化学选择决策的标准指南

1.1 This guide outlines sustainability factors for product manufacturers to consider when comparing alternative chemicals or ingredients across the life cycle of a product. Such an analysis could be used in product development, answering customer inquiries, or replying to regulatory requests, among others. 1.2 This guide integrates many of the principles of green chemistry and green engineering in evaluating the factors across the social (including human health), economic, and ecological attributes in the use of a particular material and potential alternatives in a particular product. 1.3 This guide provides an outline for the contents of a report of the results of the analysis, including an executive summary, detailed report, and retrospective. 1.4 This guide does not provide guidance on how to perform chemical risk assessment, alternatives assessment, life-cycle assessment, or economic analysis, or how the alternatives decision-making framework will be completed. 1.5 This guide does not suggest in what order the social, ecological, or economic attributes of sustainability should be evaluated or which one is most important. This is a decision of the company performing the decision-making evaluation. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products

ASTM E3027-18 在产品生命周期中制定可持续发展相关化学选择决策的标准指南

Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products

ASTM E3106-17 基于科学和基于风险的清洁工艺开发和验证标准指南

Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation