13.020.99 有关环境保护的其他标准 标准查询与下载

T/CAB 2002.6-2017 绿色生物酵素 环保用 第6 部分：污水处理专用

本部分规定了污水处理专用生物酵素的术语和定义、要求、检验方法、检验规则及包装、标签、运输和贮存。

Green biological ferment for environmental protection－Part 6：sewage treatment

T/CAB 2002.5-2017 绿色生物酵素 环保用 第5 部分：土壤重金属钝化专用

本部分规定了土壤重金属钝化专用生物酵素的术语和定义、要求、检测方法、检验规则及包装、标签、运输和贮存。

Green biological ferment for environmental protection锛峆art 5锛歨eavy metals of soil passivation

T/CAB 2002.3-2017 绿色生物酵素 环保用 第3 部分：粪污转化专用

本部分规定了粪污转化专用生物酵素的术语和定义、要求、检验方法、检验规则及包装、标签、运输和贮存。

Green biological ferment for environmental protection－Part 3：transformed animal waste

T/CAB 2002.4-2017 绿色生物酵素 环保用 第4 部分：秸秆转化专用

本部分规定了秸秆转化专用生物酵素的术语和定义、产品分类、要求、检验方法、检验规则及包装、标签、运输和贮存。

Green biological ferment for environmental protection－Part 4：used for transformed straw

T/CAB 2002.1-2017 绿色生物酵素 环保用 第1 部分：通用

本部分规定了通用生物酵素的术语和定义、要求、检验方法、检验规则及包装、标签、运输和贮存。

Green biological ferment for environmental protection－Part 1：the universal

DB21/T 2771-2017 海岛整治修复项目跟踪监测技术规程

Technical Regulations for Tracking and Monitoring of Island Rehabilitation and Restoration Projects

ASTM E2137-17 估计环境事宜货币成本和负债的标准指南

1.1 Purpose—The purpose of this document is to provide a standard guide for good commercial and customary practice in estimating costs and liabilities for environmental matters.2 Many possible uses for estimates of costs and liabilities for environmental matters exist, including but not limited to business decision making and portfolio optimization, due diligence and communications involving acquisitions and divestitures, regulatory requirements, third-party lawsuits, insurance premium calculation and claim settlement, change of property use, revitalization, compliance planning, construction and project control, analysis of remedial alternatives, budgeting, strategic planning, audit defense, financing, and investment analysis by shareholders. The use of estimated costs and liabilities developed in accordance with this standard may be subject to other standards applicable to the matter involved. For example, it is not intended to supersede accounting and actuarial standards. This standard does not address the establishment of reserves or disclosure requirements. 1.2 Objectives—The objective of this standard is to provide guidance on approaches for estimating costs and liabilities for environmental matters. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Estimating Monetary Costs and Liabilities for Environmental Matters

ASTM D8107-17 测定沉淀池撇渣器流量的标准实践

1.1 This practice covers the setting up and running of a test to determine the clear water flow rate at various depths of a floating sediment pond skimmer. 1.2 This practice is limited to large-scale test conditions, and does not address hydraulic modeling or pipe-flow based calculations. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026, unless superseded by this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining Sediment Pond Skimmer Flow Rate

T/SCSS 031-2017 智慧城市节能减排规划导则

智慧城市节能减排建设目标、原则，智慧城市节能减排指标体系，智慧城市节能减排技术应用，节能减排城市级综合信息一级平台顶层规划，节能减排行业级监控二级平台专项规划，节能减排业务级监测应用系统工程设计规范

Smart City Energy Conservation and Emission Reduction Planning Guidelines

T/SCSS 042-2017 智慧城市智慧节能空调规划导则

智慧城市智慧节能空调建设目标、智慧城市智慧节能空调建设原则、智慧城市智慧节能空调建设应用分类、智慧城市智慧节能空调建设技术分类、智慧城市智慧节能空调指标体系、智慧城市智慧节能空调信息平台规划、智慧城市智慧节能空调管理系统设计规范。

Planning guidelines for smart energy-saving air-conditioning in smart cities

T/CACE 005-2016 全国循环经济科技计划项目管理指南

根据国民经济和社会发展在循环经济领域中的重大科技需研发和应用示范的任务部署，由中国循环经济协会下达计划，实施安排，由循环经济领域科技实力雄厚的骨干企业、科研机构等单位承担，并在一定时间周期内进行的科学技术研究开发活动。

Guideline for management of circular economy science and technology project of China

GSO ISO 16304:2016 船舶与海洋技术 海洋环境保护 港口垃圾接收设施布置与管理

Parties to MARPOL are obligated as Port States to ensure that port reception facilities (PRFs) adequate to meet the needs of the ships using them without causing undue delay are provided at their ports and terminals. MARPOL does not seek to regulate the management of ship generated waste at ports and terminals beyond the reception facility requirement. However, ports and terminals must observe any national and regional regulations. While these regulations exceed the scope of MARPOL, the IMO recognizes the need to manage ship generated waste at ports and terminals as part of an environmentally sound management approach for avoiding, minimizing and eliminating pollution from ships. This International Standard applies to the management of ship generated waste regulated by MARPOL that is discharged at ports and terminals. It also covers principles and issues that should be considered in the development of a port waste management plan (PWMP), its implementation and PRF operations. The operation of any PRF is governed by the principles and procedures included in the PWMP. The procedures to operate the PRF and the development of a PWMP are closely linked and therefore are integrated into this International Standard. This International Standard addresses the principles and issues that should be considered in: • The development of a port waste management strategy; • The design and operation of PRFs; • PWMP development, implementation and compliance; and • PRF management and accountability. This International Standard has been designed to be used by ports of any size and capability. It does not give specifics on the size or location of PRFs in each port, but provides a list of principles to be considered and applied to any size or type of port or terminal (e.g. marina, fishing port, container terminal, oil terminal, roll on/roll off terminal, cruise terminal, ferry terminal, bulk or general cargo terminal, ship repair or recycling facility, and offshore terminal). This International Standard can also be used by those ports that have entered into regional arrangements for the provision of their PRF, or inland ports and marinas, providing that the definition of waste and its management in the national legislation of the facility are referenced accordingly. Many ports already have systems in place that work efficiently; therefore this International Standard can be used by ports with existing PRFs as well as new ports or existing ports developing new PRFs.

Ships and marine technology -- Marine environment protection -- Arrangement and management of port waste reception facilities

GSO IEC 62040-4:2016 不间断电源系统 (UPS) 第4部分：环境因素 要求和报告

IEC 62040-4:2013 specifies the process and requirements to declare the environmental aspects concerning uninterruptible power systems (UPS), with the goal of promoting reduction of any adverse environmental impact during a complete UPS life cycle. This product standard is harmonized with the applicable generic and horizontal environmental standards and contains additional details relevant to UPS. This standard applies to movable, stationary and fixed UPS that deliver single or three-phase fixed frequency a.c. output voltage not exceeding 1 000 V a.c. and that present, generally through a d.c. link, an energy storage system and specified in IEC 62040 product standards for UPS.

Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting.

DB44/T 1874-2016 产品碳足迹 产品种类规则 巴氏杀菌乳

全脂、脱脂和部分脱脂巴氏杀菌乳的碳足迹评价范围

Product Carbon Footprint Product Category Rules Pasteurized Milk

CJ/T 171-2016 城镇环境卫生设施属性数据采集表及数据库结构

Data Collection Form and Database Structure of Urban Sanitation Facilities Attributes

GSO ISO 13073-1:2015 船舶和海洋技术 船舶防污系统风险评估 第1部分：船舶防污系统用杀菌活性物质海洋环境风险评估方法

  Scope is not provided for this standard

Ships and marine technology - Risk assessment on anti-fouling systems on ships -- Part 1: Marine environmental risk assessment method of biocidally active substances used for anti-fouling systems on ships

GSO ISO 13073-2:2015 船舶和海洋技术 船舶抗真菌系统风险评估 第2部分：使用农药活性物质的船舶抗真菌系统海洋环境风险评估方法

  Scope is not provided for this standard

Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 2: Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances

BS ISO 13065:2015 对生物能源的可持续性标准

Sustainability criteria for bioenergy

JIS Z 7161:2015 采用碳氟化合物或替代碳氟化合物的产品环境影响成就水平标签

Labels for environmental-impacts achievement levels for the products using fluorocarbons or alternative fluorocarbons

DB11/T 353-2014 城市道路清扫保洁质量与作业要求

Urban road cleaning quality and operation requirements