13.030.01 废物综合 标准查询与下载

DB3305/T 265-2023 生活垃圾分类智能设施配置及管理规范

Specifications for configuration and management of intelligent facilities for domestic waste classification

T/BAEE 018-2023 城镇污水处理生态产品价值核算指南

本文件规定了城镇污水处理生态产品价值的构成、核算方法及评价方式。  本文件适用于城镇污水处理的生态产品价值核算及评价。

Guidance for the value calculation of ecological products in urban sewage treatment

T/FJCHX 00004-2023 城镇生活垃圾分类投放要求

1  范围 2  规范性引用文件 3  术语和定义 4  分类与标志 5  基本要求 6  管理要求 7  操作要求 8  应急处置

Requirements for classified disposal of urban domestic waste

T/SGIPA 016-2023 利用废线路板分离的废树脂粉生产塑料母粒技术规程

本标准规定了利用废线路板分离的废树脂粉生产塑料母粒技术的术语和定义、利用废线路板分离的废树脂粉生产塑料母粒工艺控制条件及要求、原辅料、工艺设备、资源化利用、验收和运行与维护等技术要求。

Technical specification for producing plastic masterbatch from waste resin powder separated from waste printed circuit board

ASTM D6051-15(2023) 环境废物管理活动的复合取样和现场二次取样的标准指南

1.1 Compositing and subsampling are key links in the chain of sampling and analytical events that must be performed in compliance with project objectives and instructions to ensure that the resulting data are representative. This guide discusses the advantages and appropriate use of composite sampling, field procedures and techniques to mix the composite sample, and procedures to collect an unbiased and precise subsample(s) from a larger sample. It discusses the advantages and limitations of using composite samples in designing sampling plans for characterization of wastes (mainly solid) and potentially contaminated media. This guide assumes that an appropriate sampling device is selected to collect an unbiased sample. 1.2 The guide does not address: where samples should be collected (depends on the objectives) (see Guide D6044), selection of sampling equipment, bias introduced by selection of inappropriate sampling equipment, sample collection procedures or collection of a representative specimen from a sample, or statistical interpretation of resultant data and devices designed to dynamically sample process waste streams. It also does not provide sufficient information to statistically design an optimized sampling plan, or determine the number of samples to collect or calculate the optimum number of samples to composite to achieve specified data quality objectives (see Practice D5792). Standard procedures for planning waste sampling activities are addressed in Guide D4687. 1.3 The sample mixing and subsampling procedures described in this guide are considered inappropriate for samples to be analyzed for volatile organic compounds. Volatile organics are typically lost through volatilization during sample collection, handling, shipping, and laboratory sample preparation unless specialized procedures are used. The enhanced mixing described in this guide is expected to cause significant losses of volatile constituents. Specialized procedures should be used for compositing samples for determination of volatiles such as combining directly into methanol (see Guide D4547). 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities

DB37/T 4583-2023 建筑垃圾综合利用技术导则

Technical Guidelines for Comprehensive Utilization of Construction Waste

T/CNIA 0199-2023 含铜污泥取制样方法

本文件描述了含铜污泥取制样的一般要求、取样、制样、水分测定及试样的保存和标签。 本文件适用于电子元件制造、电镀等表面处理以及铜冶炼等过程产生的含铜废水（液）在处理过程中产生的含铜污泥的取制样。

Method for sampling copper-containing sludge

T/ACEF 059-2023 餐饮行业碳减排量核算指南 减少食品浪费

4.减少食品浪费碳减排核算管理流程  5.减少食品浪费碳减排量核算边界界定  6.减少食品浪费碳减排量核算方法 

Guidelines for Accounting for Carbon Emission Reductions in the Catering Industry to Reduce Food Waste

T/SDEPI 033-2023 废活性炭微波再生技术规范

本文件规定了废活性炭微波再生的总体要求、预处理、微波再生、污染控制与监测、质量管理等要求。 本文件适用于水处理、气体净化、产品精制等过程产生的废活性炭采用微波再生处理，其他类型废活性炭参照执行。

Technical Specification for Microwave regeneration of waste activated carbon

GH/T 1406-2022 果蔬加工废弃物综合利用技术导则

本文件适用于果蔬加工业产生的普通废弃物利用和管理，不适用于危险废弃物的处理。

Technical Guidelines for Comprehensive Utilization of Fruit and Vegetable Processing Wastes

HJ 1276-2022 危险废物识别标志设置技术规范

本标准规定了产生、收集、贮存、利用、处置危险废物单位需设置的危险废物识别标志的分类、内 容要求、设置要求和制作方法。 本标准适用于危险废物的容器和包装物，以及收集、贮存、利用、处置危险废物的设施、场所使用 的环境保护识别标志的设置。 危险废物运输过程中识别标志设置还应遵守国家有关危险货物运输管理的规定。

Technical specification for setting identification signs of hazardous waste

T/CI 172-2022 酚基精馏釜残资源化利用技术规范

6 酚基精馏釜残资源化利用工艺流程 6.1 工艺流程描述 短侧链酚基精馏釜残资源化利用工艺：采用减压精馏塔，对酚基精馏釜残进行减压深拔，在塔顶收集酚基精馏釜残轻质混合酚，在塔底收集酚基精馏釜残重质残渣。酚基精馏釜残轻质混合酚掺混一定比例的苯酚后在酸性催化剂（如草酸）下与甲醛反应生成酚醛树脂，该釜残基酚醛树脂代替传统的酚醛树脂用作镁碳砖黏结剂，与镁砂粉、沥青粉末等进行混合后，用于镁碳砖的压合制备，在镁碳砖热转化过程中挥发出的有机物采用集中收集的方式进行回收。 酚基精馏釜残重质残渣与甲醛混合，在酸性催化剂作用下发生交联反应，生成粘度较高的类树脂化合物，经稀释剂调黏后可作为煤基活性炭黏结剂，最后与煤焦油和煤粉黏合、压条、干燥、炭化、活化后制备成活性炭。加入粘结剂调粘的稀释剂在活性炭热碳化阶段挥发出，经过收集系统收集后回收。 针对长支链酚基精馏釜残，将酚基精馏釜残、固化剂及沥青混合制备为环氧沥青反应B组分，环氧树脂为A组分，在制备环氧沥青（道路施工）的过程中，将环氧沥青在较高温度下充分混合形成长支链酚基精馏釜残环氧沥青，长支链酚基精馏釜残环氧沥青再与砂石料混合后可作为道路施工路基材料。

Technological Specification for the Resourcezation of Phenolic Distillation Residues

T/AHQTA 002-2022 电路板蚀刻工艺酸性废液零排放清洁生产技术规范

本文件规定了电路板蚀刻工艺酸性废液的回收再生工艺流程、工艺技术和环境保护。 本文件适用于电路板蚀刻工艺酸性废液的回收再生。

Technical specifications for clean production of acidic waste liquid in circuit board etching process with zero discharge

T/AHQTA 001-2022 电路板蚀刻工艺碱性废液零排放清洁生产 技术规范

本文件界定了电路板碱性蚀刻液废液循环再生、提铜回收的术语和定义，规定了碱性蚀刻液蚀刻、 回收、萃余蚀刻液再生、设备要求、质量控制及环境保护。 本文件适用于印制电路板碱性蚀刻液再生回收、提铜相关成套设备。

Technical specification for clean production of alkaline waste liquid in circuit board etching process with zero discharge

T/SDSES 004-2022 含油污泥辐射热裂解资源化利用工程技术规范

本规范规定了含油污泥辐射热裂解资源化利用工程设计、施工验收和运营管理等的工程技术要求。 本规范适用于采用辐射加热方式对含油污泥进行热裂解资源化利用的新建、改建和扩建工程；除本规范定义的含油污泥外，受石油类污染物污染的土壤、海洋及河流底泥等也适用于本规范。

Engineering technical specifications for the resource utilization of radiant thermal cracking of oily sludge

T/SCEA 010-2022 社区生活垃圾分类收集运输作业规范

    1     范围　     2     规范性引用文件　     3     术语和定义　     4     基本要求　     5     分类收集　     6     分类运输     7     突发事件应急处置　

Specification for the sorting, collection and transportation of community solid waste

DB34/T 4296-2022 废线路板综合利用污染控制技术规范

Technical Specifications for Pollution Control of Waste Circuit Board Comprehensive Utilization

DB32/T 4371-2022 废无机酸综合利用污染控制技术规范

Technical Specifications for Pollution Control of Comprehensive Utilization of Waste Inorganic Acids

T/CNIA 0154-2022 锂电废匣钵处置及回收利用技术规范

本文件规定了锂电正极材料生产过程中铝硅镁质陶瓷废匣钵的分类、收集、运输和贮存要求、回收利用要求、环境保护要求。 本文件适用于锂电正极材料生产过程中铝硅镁质陶瓷废匣钵的贮运、回收及利用。

Technical specifications for disposal and recycling of lithium battery waste saggers

T/ZSESS 003-2022 厨余垃圾收集运输工作规范

前言 1 范围  2 规范性引用文件  3 术语和定义 4 厨余垃圾收集 5 厨余垃圾运输 附录 A（资料性） 厨余垃圾收运、运输车辆及转运站点建设要求台账  附录 B（资料性） 生活垃圾分类运输车辆外观标识 参考文献

Specification for collection and transportation of food waste