13.030.20 液态废物、淤泥 标准查询与下载

DIN EN 15216:2008 废弃物的特征.水中和提取液中溶解固体总量(TDS)的测定

This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/[ of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates; English version of DIN EN 15216:2008-01

EN 15170:2008 淤泥特性.生热值的测定

This European Standard specifies a method for the determination of the gross calorific value of sludge at constant volume and at the reference temperature 25 ℃ in a bomb calorimeter calibrated by combustion of certified benzoic acid. The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. In practice, sludges are burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion to be used is the net calorific value of the fuel at constant pressure. InThis European Standard the net calorific value at constant volume is described as it requires less additional determinations.This method is applicable to all kinds of sludges.

Characterization of sludges - Determination of calorific value

DS/CEN/TR 15584:2007 污泥的特征 风险评估指南，特别是与污泥的使用和处置相关的风险评估

The Scope of this document includes sludges from treating municipal, industrial and food processing wastewaters, sludge from treating raw water to make it potable, and other residues having similar potential environmental impacts.The purpose of this document is to discuss risk assessment in general and especially as it has been applied to sludges for an audience of specialists and non-specialists. The objective is to set risk assessment in the context of policy making and operating sludge use and disposal.

Characterisation of sludges - Guide to risk assessment especially in relation to use and disposal of sludges

NF X30-480:2007 废弃物的特征.水中和提取液中溶解固体总量(TDS)的测定

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates.

BS PD CEN/TR 15473:2007 淤泥特性.淤泥烘干用良好实施规程

This CEN Technical report describes good practices for sludge drying and it is one of a series on sludge management options. It gives guidance on - drying processes; - characteristics of dried sludge products; - recycling or disposal of dried sludge products. from urban wastewater treatment plants. Sludges of other origin, like sludge from water supply or industrial treatment plants are not in the exact scope of this CEN Technical Report, however the handling of most of these sludges will comply to a large extent with the leads given in this CEN Technical Report.

Characterization of sludges — Good practice for sludges drying

BS PD CEN/TR 15463:2007 淤泥的特性.物理粘合性、触变性能和堆叠性能

1.1 The Horizontal project and the Work Package 7 The revision of the Sewage Sludge Directive 86/278/EEC, the upcoming Composting Directive on the biological treatment of biodegradable waste and the Soil Monitoring Directive call for standards on sampling, hygienic and biological parameters, methods for inorganic and organic contaminants, and for mechanical properties of these materials. 1.2 Desk study subject The Task Group 3 (TG3) of CEN/TC308/WG1 defined 3 physical states for sludge (CEN/TC308/WG1/TG3, 2000): a) Liquid: sludge flowing under the effect of gravity or pressure below a certain threshold. b) Paste-like: sludge capable of continuous flow under the effect of pressure above a certain threshold and having a shear resistance below a certain threshold. c) Solid: sludge having a shear resistance above a certain threshold. 1.3 Evaluation of needs for control of operations and material characteristics 1.3.1 Evaluation of needs for control of operation 1.3.2 Material characteristics 1.4 Search for existing standards and methods The first action carried out consisted in searching for existing standards and non-standardised methods to be possibly used or adapted for utilisation in the specific field of consistency evaluation. 1.5 Basic information

Characterization of sludges. Physical consistency. Thixotropic behaviour and piling behaviour

DS/CEN/TR 15463:2007 污泥的表征 物理稠度 触变行为和堆积行为

This CEN-Report """"Physical Consistency"""" derives from the Desk Studies """"Physical Properties -Flowability""""(HORIZONTAL Report No. 21 [60]) and """"Physical Properties - Solidity, Thixotropic Behaviour andPiling Behaviour"""" (HORIZONTAL Report No. 22 [61]) of the Horizontal Project. The """"Horizontal"""" project hasthe objective to develop horizontal and harmonised European standards in the fields of sludge, bio-waste andsoil to facilitate regulation of these major streams in the multiple decisions related to different uses anddisposal governed by EU Directives. The Horizontal Project includes the Work Package 7 """"Mechanicalproperties"""" consist

Characterization of sludges - Physical consistency - Thixotropic behaviour and piling behaviour

DS/CEN/TR 15473:2007 污泥的特性 污泥干化的良好实践

This CEN Technical report describes good practices for sludge drying and it is one of a series on sludge management options. It gives guidance on - drying processes;- characteristics of dried sludge products;- recycling or disposal of dried sludge products.from urban wastewater treatment plants. Sludges of other origin, like sludge from water supply or industrial treatment plants are not in the exact scope of this CEN Technical Report, however the handling of most of these sludges will comply to a large extent with the leads given in this CEN Technical Report.

Characterization of sludges - Good practice for sludges drying

DS/CEN/CR 13846:2007 保护和扩大污泥利用和处置路线的建议

Increased material flows in the environment are a natural consequence of development, however, for sustainable growth the flows particularly of wastes have to be managed in order to conserve resources and protect the environment.

Recommendations to preserve and extend sludge utilization and disposal routes

BS EN 14702-1:2007 淤泥特征 沉降性能 第1部分：沉降性能的测定（淤泥体积和淤泥体积指数比的测定）

Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)

BS EN 14701-3:2006 淤泥特征.过滤特性.第3部分:可压缩性的测定

This document specifies a method to determine the compressibility of sludges, conditioned or not. This document is applicable to sludges and sludge suspensions from: - storm water handling; - urban wastewater collecting systems; - urban wastewater treatment plants; - treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC); - water supply treatment plants. This method is also applicable to sludge and sludge suspensions of other origin.

Characterization of Sludges. Filtration Properties. Part 3: Determination of the Compressibility

BS EN 14701-3:2007 淤泥特征 过滤特性 第3部分：可压缩性的测定

Characterization of sludges - Filtration properties - Determination of the compressibility

BS EN 14702-1:2006 淤泥特征.沉降性能.第1部分:沉降性能的测定(淤泥体积和淤泥体积指数比的测定)

This document specifies a method for the determination of the settleability of sludge suspensions. This document is applicable to sludge suspensions from: - storm water handling; - urban wastewater collecting systems; - urban wastewater treatment plants; - treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271 EEC); - water supply treatment plants. This method is also applicable to sludge suspensions from other origin.

Characterization of Sludges. Settling Properties. Part 1: Determination of Settleability (Determination of the Proportion of Sludge Volume and Sludge Volume Index)

BS EN 14702-2:2007 淤泥特性 沉降性能 第2部分：增稠性的测定

Characterisation of sludges - Settling properties - Determination of thickenability

BS EN 14671:2007 淤泥特性 用2mol/l氯化钾测定可萃取氨的预处理

Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride

BS EN 14701-1:2006 淤泥特性.过滤性能.第1部分:毛细管抽吸时间(CST)

This document specifies a method for the determination of the capillary suction time. This document is applicable to sludge and sludge suspensions from: - storm water handling; - urban wastewater collecting systems; - urban wastewater treatment plants; - treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC); - water supply treatment plants. This method is also applicable to sludge suspensions from other origin.

Characterization of Sludges. Filtration Properties. Part 1: Capillary Suction Time (CST)

BS EN 14671:2006 淤泥特性.用2mol/l氯化钾测定可萃取氨的预处理

This European standard specifies a procedure for the determination of extractable ammonia using a 2 mol/l potassium chloride solution in raw and digested sewage sludges. The range of the method is up to 100 g/kg N assuming appropriate dilution of the potassium chloride extract in the final measurement step. NOTE The above wording will be modified once the round robin results are available. It may be suitable for other types of sludges, but the user should validate the method using these sludges.

Characterization of Sludges. Pre-treatment for the Determination of Extractable Ammonia Using 2 mol/l Potassium Chloride

BS EN 14702-2:2006 淤泥特性.沉降性能.第2部分:增稠性的测定

This document specifies a method for the determination of the thickenability of sludge suspensions. This document is applicable to sludge suspensions from: - storm water handling; - urban wastewater collecting systems; - urban wastewater treatment plants; - treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271 EEC); - water supply treatment plants. This method is also applicable to sludge suspensions from other origin.

Characterization of Sludges. Settling Properties. Part 2: Determination of Thickenability

BS PD CEN/TR 15175:2006 污泥的特性描述.污泥的化学和微生物分析用实验室间试验的组织和实施方法协议

This Technical Report specifies the requirements for interlaboratory tests to validate chemical and microbiological methods for sludges.

Characterization of sludges. Protocol for organizing and conducting interlaboratory tests of methods for chemical and microbiological analysis of sludges

BS EN 14701-1:2007 淤泥特性 过滤性能 第1部分：毛细管抽吸时间（CST）

Characterization of sludges - Filtration properties - Capillary suction time (CST)