13.030.20 液态废物、淤泥 标准查询与下载

HG/T 4687-2014 过氧化氢泄漏的处理处置方法

本标准告知了过氧化氢的理化性质和危害性,规定了泄漏时的紧急措施、泄漏现场的处理方法和泄漏现场的处置方法。本标准适用于过氧化氢在生产、储存、使用、经营和运输等过程中发生泄漏时的处理、处置。

Treatment and disposal method for hydrogen peroxide spill

HG/T 4686-2014 液氨泄漏的处理处置方法

本标准告知了液氨的理化性质和危害性,规定了发生液氨泄漏时的紧急措施、泄漏现场的处理方法和泄漏现场的处置方法。本标准适用于液氨在生产、使用、经营、运输和贮存过程中发生泄漏时的处理处置。

Treatment and disposal method for liquid ammonia leakage

HG/T 4685-2014 无水氟化氢泄漏的处理处置方法

本标准告知了无水氟化氢的理化性质和危害性,规定了发生无水氟化氢泄漏时的紧急措施、泄漏现场的处理方法和泄漏现场的处置方法。本标准适用于无水氟化氢在生产、贮存、使用、经营和运输过程中发生泄漏时的处理、处置。

Treatment and disposal method for anhydrous hydrogen fluoride spill

HG/T 4684-2014 液氯泄漏的处理处置方法

本标准告知了液氯的理化性质和危害性,规定了发生液氯泄漏时的紧急措施、泄漏现场的处理方法和泄漏现场的处置方法。本标准适用于液氯在生产、贮存、使用、经营、运输等过程中发生泄漏时的处理、处置。

Treatment and disposal method for liquid chlorine spill

HG/T 4683-2014 三氯氢硅泄漏的处理处置方法

本标准告知了三氯氢硅的理化性质和危害性,规定了发生三氯氢硅泄漏时的紧急措施、泄漏现场的处理方法和泄漏现场的处置方法。本标准适用于三氯氢硅在生产、贮存、使用、经营、运输等过程中发生泄漏时的处理、处置。

Treatment and disposal method for trichlorosilane spill

14/30295922 DC BS EN 16720-2 污泥的表征 物理一致性 第 2 部分：坚固性的测定 采用袋式叶片剪切装置的方法

BS EN 16720-2. Characterization of sludges. Physical consistency. Part 2. Determination of solidity. Method by pocket vane shear apparatus

DIN CEN/TS 16181:2013 污泥, 经处理生物废弃物和土壤. 采用气相色谱法(GC)和高效液相色谱法(HPLC)对多环芳香烃(PAH)的测定; 德文版本CEN/TS 16181-2013

Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC); German version CEN/TS 16181:2013

HG/T 4546-2013 亚氯酸钠生产废液回收再利用的处理方法

本标准规定了亚氯酸钠生产废液的组成、处理处置方法及环境保护。本标准适用于亚氯酸钠生产废液回收再利用。

Methods for disposing reused waste liquor in sodium chlorite production

HG/T 4544-2013 对苯二酚生产废液回收再利用生产碳酸锰的方法

本标准规定了对苯二酚生产废液回收再利用生产碳酸锰的方法的方法提要、处理方法、回收制得产品的指标。本标准适用于以苯胺氧化法生产对苯二酚产生的废液回收生产碳酸锰。

Method for the recovery of manganese carbonate from liquid waste of 1 ,4-dihydroxy benzene production

DIN CEN/TS 13714:2013 污泥的特性.与使用或处理有关的污泥管理.德文版本CEN/TS 13714-2013

Characterization of sludges - Sludge management in relation to use or disposal; German version CEN/TS 13714:2013

PD CEN/TS 16181:2013 污泥、处理过的生物废物和土壤 通过气相色谱法（GC）和高效液相色谱法（HPLC）测定多环芳烃（PAH）

This Technical Specification specifies the quantitative determination of 16 polycyclic aromatic hydrocarbons (PAH) (see Table 2) in sludge, soil and treated biowaste using GC-MS and HPLC-UV-DAD/FLD covering a wide range of PAH contamination levels (see also Annex B). When using fluorescence detection, acenaphthylene cannot be measured. The limit of detection depends on the determinants, the equipment used, the quality of chemicals used for the extraction of the sample and the clean-up of the extract. Typically, a lower limit of application of 0,01 mg/kg (expressed as dry matter) may be ensured for each individual PAH. This depends on instrument and sample. Sludge, soil and treated biowaste may differ in properties and also in the expected contamination levels of PAHs and presence of interfering substances. These differences make it impossible to describe one general procedure. This Technical Specification contains decision tables based on the properties of the sample and the extraction and clean-up procedure to be used. Two general lines are followed, an agitation procedure (shaking) or use of soxhlet/pressurised liquid extraction. NOTE Other PAH compounds can also be analysed with this method, provided suitability has been proven.

Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)

DS/CEN/TR 16456:2013 污泥的特性 污泥脱水的良好实践

This CEN Technical Report describes good practice for sludge dewatering and belongs to a series on sludge management options. It gives guidance on technical and operational aspects of: - conditioning, thickening and dewatering processes. Drying, which is

Characterization of sludges - Good practice of sludge dewatering

PD CEN/TR 16456:2013 污泥的特性 污泥脱水的良好实践

Characterization of sludges - Good practice of sludge dewatering

PD CEN/TS 13714:2013 污泥的特性 与使用或处置相关的污泥管理

This Technical Specification gives guidance for dealing with the production and control of sludge in relation to inputs and treatment and gives a strategic evaluation of recovery, recycling and disposal options for sludge according to its properties and the availability of outlets. This Technical Specification is applicable to sludges from: storm water handling; night soil; urban wastewater collecting systems; urban wastewater treatment plants; treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EC [1]); water supply treatment plants; but excluding hazardous sludges from industry.

Characterization of sludges - Sludge management in relation to use or disposal

DIN EN 14701-2:2013 污泥特性.过滤特性.第2部分:专用耐过滤得测定.德文版本EN 14701-2-2013

Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration; German version EN 14701-2:2013

DB31/T 707-2013 废弃电子电气设备回收及处理处置行业废水中重金属、溴系阻燃剂的检测方法

本标准适用于废弃电子电气设备回收及处理处置行业废水中重金属、溴系阻燃剂含量的检测。

Test method of heavy metals and brominated flame retardants in wastewater from recycling, recovery and treatment industry of waste electrical and electronic equipment

BS EN 14701-2:2013 污泥的特性描述. 过滤性能. 过滤比阻的测定

Characterisation of sludges. Filtration properties. Determination of the specific resistance to filtration

DS/EN 14701-2:2013 污泥的表征 过滤性能 第2部分：特定过滤阻力的测定

This European Standard specifies a method for determining the specific resistance to filtration of conditioned and non-conditioned sludges, provided that no sedimentation occurs during filtration (i.e. single phase suspension with particles in suspension)

Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration

DB33/T 891-2013 污泥土地利用技术规范

Technical Specifications for Sludge Land Utilization

EN 14701-2:2013 过滤性能.污泥的表征第2部分:过滤的电阻率的测定

This European Standard specifies a method for determining the specific resistance to filtration of conditioned and non-conditioned sludges, provided that no sedimentation occurs during filtration (i.e. single phase suspension with particles in suspension). This European Standard is applicable to sludges and sludge suspensions from: storm water handling; urban wastewater collecting systems; urban wastewater treatment plants; industrial wastewater that has been treated similarly to urban wastewater (as defined in Directive 91/271/EEC); water supply treatment plants. This method is also applicable to sludge and sludge suspensions of other origins.

Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration