13.030.30 特殊废物 标准查询与下载

DS/ISO 22453:2021 交换工业废物和报废循环产品中稀土元素的信息

Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products

ISO 22927:2021 稀土.包装和标签

This document specifies requirements and recommendations for the packaging and labelling of rare earth ores, concentrates, compounds, metals and alloys that are intended for sale or free distribution. It defines the performance and structure of packaging, and specifies the information to include on the labelling. These requirements and recommendations are designed to ensure quality assurance, enhance safety and prevent environmental pollution during the transportation and storage of rare earth products. This document is applicable to packaging and labelling during transactions between companies. It does not include packaging by companies during storage in their own plant. The method of labelling defined in this document enhances safety by indicating properties of rare earth products and ensures appropriate management of the product by indicating the identity of suppliers.

Rare earth — Packaging and labelling

DS/ISO/TS 22451:2021 稀土元素的回收利用 工业废弃物和报废产品中稀土元素的测定方法

Recycling of rare earth elements – Methods for the measurement of rare earth elements in industrial waste and end-of-life products

BS PD ISO/TS 22451:2021 稀土元素的回收利用 工业废物和报废产品中稀土元素的测量方法

Recycling of rare earth elements. Methods for the measurement of rare earth elements in industrial waste and end-of-life products

ISO 22453:2021 关于工业废物和报废循环产品中稀土元素的信息交流

This document specifies methods of information exchange between waste handlers and recyclers for rare earth elements (REEs) contained in industrial waste and end-of-life (EOL) products. This document facilitates the efficient recycling of REEs so that dependency on mining can be reduced by promotion of REE recycling. This document also includes a generic life cycle of the REE recycling process.

Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products

NF M62-239:2021 监测生产正电子发射放射性核素和放射性药物的设施流出物中的放射性气体

Domaine d'applicationLe présent document porte sur la surveillance de la concentration volumique des gaz radioactifs. Ils permettent le calcul des rejets d'activité, dans les effluents gazeux libérés par les installations produisant des radionucléides et des produits radiopharmac

Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals

NF X30-501:2021 医疗废物包装 软感染风险产生废物袋 规范和试验方法

Packaging for medicinal care waste - Bags for soft infections risk-generating waste - Specifications and test methods

ASTM D4447-21 实验室化学品和样品处置标准指南

1.1?This guide is intended to provide the chemical laboratory manager, chemical laboratory safety officer, and other relevant staff with guidelines for the disposal of small quantities of laboratory wastes safely and in an environmentally sound manner. This guide is applicable t

Standard Guide for Disposal of Laboratory Chemicals and Samples

ASTM E2421-15(2021) 准备核设施退役废物管理计划的标准指南

1.1 This guide addresses the development of waste management plans for potential waste streams resulting from decommissioning activities at nuclear facilities, including identifying, categorizing, and handling the waste from generation to final disposal. 1.2 This guide is applicable to potential waste streams anticipated from decommissioning activities of nuclear facilities whose operations were governed by the Nuclear Regulatory Commission (NRC) or Agreement State license, under Department of Energy (DOE) Orders, or Department of Defense (DoD) regulations. 1.3 This guide provides a description of the key elements of waste management plans that if followed will successfully allow for the characterization, packaging, transportation, and off-site treatment or disposal, or both, of conventional, hazardous, and radioactive waste streams. 1.4 This guide does not address the on-site treatment, long term storage, or on-site disposal of these potential waste streams. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities

BS ISO 16640:2021 监测正电子发射放射性核素和放射性药物生产设施流出物中的放射性气体

Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals

ISO 16640:2021 监测产生正电子发射放射性核素和放射性药物的设施所产生的废水中的放射性气体

Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals

HG/T 5817-2020 硫酸工业产生的废矿渣处理处置方法

Treatment and disposal method of waste slag generated by sulfuric acid industry

ASTM C1111-10(2020) 通过电感耦合等离子体原子发射光谱法测定废物中的元素的标准测试方法

1.1 This test method covers the determination of trace, minor, and major elements in waste streams by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) following an acid digestion of the sample. Waste streams from manufacturing processes of nuclear and non-nuclear materials can be analyzed. This test method is applicable to the determination of total metals. Results from this test method can be used to characterize waste received by treatment facilities and to formulate appropriate treatment recipes. The results are also usable in process control within waste treatment facilities. 1.2 This test method is applicable only to waste streams that contain radioactivity levels that do not require special personnel or environmental protection. 1.3 A list of the elements determined in waste streams and the corresponding lower reporting limit is found in Table 1. 1.4 This test method has been used successfully for treatment of a large variety of waste solutions and industrial process liquids. The composition of such samples is highly variable, both between waste stream types and within a single waste stream. As a result of this variability, a single acid digestion scheme may not be expected to succeed with all sample matrices. Certain elements may be recovered on a semiquantitative basis, while most results will be highly quantitative. 1.5 This test method should be used by analysts experienced in the use of ICP-AES, the interpretation of spectral and non-spectral interferences, and procedures for their correction. 1.6 No detailed operating instructions are provided because of differences among various makes and models of suitable ICP-AES instruments. Instead, the analyst shall follow the instructions provided by the manufacturer of the particular instrument. This test method does not address comparative accuracy of different devices or the precision between instruments of the same make and model. 1.7 This test method contains notes that are explanatory and are not part of the mandatory requirements of the method. 1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy

ITU-T L.1031-2020 实现连通目标 2030 议程电子垃圾目标的指南

Guideline for achieving the e-waste targets of the Connect 2030 Agenda

DB31/T 1249-2020 医疗废物卫生管理规范

Medical Waste Hygienic Management Regulations

DS/ISO 22450:2020 稀土元素回收利用 工业废弃物及报废产品信息提供要求

Recycling of rare earth elements – Requirements for providing information on industrial waste and end-of-life products

T/GDACERCU 0007-2020 湿法磷酸浓缩过程中氟回收工艺规范

本文件规定了湿法磷酸浓缩过程中氟回收工艺规范。

Process Specification for Fluorine Recovery in Wet-process Phosphoric Acid Concentration

ASTM C1174-20 高放射性废物地质处置用工程屏障系统（EBS）材料长期性能评估的标准指南

1.1 This guide addresses how various test methods and data analyses can be used to develop models for the evaluation of the long-term alteration behavior of materials used in an engineered barrier system (EBS) for the disposal of spent nuclear fuel (SNF) and other high-level nuclear waste in a geologic repository. The alteration behavior of waste forms and EBS materials is important because it affects the retention of radionuclides within the disposal system either directly, as in the case of waste forms in which the radionuclides are initially immobilized, or indirectly, as in the case of EBS containment materials that restrict the ingress of groundwater or the egress of radionuclides that are released as the waste forms degrade. 1.2 The purpose of this guide is to provide a scientificallybased strategy for developing models that can be used to estimate material alteration behavior after a repository is permanently closed (that is, in the post-closure period). Because the timescale involved with geological disposal precludes direct validation of predictions, mechanistic understanding of the processes based on detailed data and models and consideration of the range of uncertainty are recommended. 1.3 This guide addresses the scientific bases and uncertainties in material behavior models and the impact on the confidence in the EBS design criteria and repository performance assessments using those models. This includes the identification and use of conservative assumptions to address uncertainty in the long-term performance of materials. 1.3.1 Steps involved in evaluating the performance of waste forms and EBS materials include problem definition, laboratory and field testing, modeling of individual and coupled processes, and model confirmation. 1.3.2 The estimates of waste form and EBS material performance are based on models derived from theoretical considerations, expert judgments, and interpretations of data obtained from tests and analyses of appropriate analogs. 1.3.3 For the purpose of this guide, tests are categorized according to the information they provide and how it is used for model development, support, and use. These tests may include but are not limited to: attribute tests, characterization tests, accelerated tests, service condition tests, and confirmation tests. 1.4 This guide does not address testing required to define or characterize the repository environment (that is, the groundwater quantity or chemistry, host rock properties, etc.). The logical approach and testing concepts described herein can be applied to the disposal system. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste

ASTM C1751-20 放射性废物采样标准指南

Standard Guide for Sampling Radioactive Tank Waste

HG/T 5542-2019 镍铬盐污染场地处理方法

Treatment methods for nickel-chromium salt contaminated sites