13.030.40 废物处置和处理设备和装置 标准查询与下载

T/FJCHX 00002-2023 福建省城市生活垃圾处置企业安全生产标准化规范

1 范围 2 规范性引用文件 3 术语和定义 4 一般要求 5 目标职责 6 制度化管理 7 教育培训 8 现场管理 9 安全风险管控及隐患排查治理 10 应急管理 11 事故管理 12 绩效评定和持续改进

Standardization specification for safety production of urban domestic waste disposal enterprises in Fujian province

T/5115YBAPS 043.1-2023 机动车修理业危险废物治理数字化系统 第1部分：通用指南

机动车修理业危险废物治理数字化系统的术语和定义、总则、危险废物分类、基本条件、数字化系统、数据采集与安全、数据应用和管理等要求。

Hazardous waste management digital system in motor vehicle repair industry Part 1: General guidelines

T/CIET 037-2023 KCS系列矿用湿式除尘风机

本文件规定了KCS系列矿用湿式除尘风机（以下简称“除尘风机”）的术语和定义、型号及结构、要求、试验方法、检验规则以及标志、包装与运输等内容。 本文件适用于除尘机理为湿式旋流除尘的矿用湿式除尘风机。

KCS series mine wet dust removal fan

DB11/T 2078-2023 建筑垃圾消纳处置场所设置运行规范

Specifications for the establishment and operation of construction waste disposal sites

T/QGCML 697-2023 离心机固液分离技术规范

本标准规定了离心机固液分离技术规范的术语和定义、流程、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于离心机固液分离技术的检验。

Technical specifications for solid-liquid separation of centrifuges

T/CAMIE 11-2023 堆肥混料机

本文件规定了堆肥混料机的术语和定义、分类与型号、系统组成、使用条件、要求，同时规范了其试验方法、检验规则、标志、包装、运输和贮存。  本文件适用于污泥、粪便（粪渣）固体废物堆肥的前处理过程中物料连续混合式混料机的生产和检验，其他有机固废堆肥混料机可参照此文件。 

Compost mixer

T/ACEF 067-2023 生活垃圾焚烧炉协同处置污泥技术规范

范围、规范性引用文件、术语和定义、总体要求、污泥干化、污泥掺烧、安全运行与监管。

Technical specification for coprocessing sludge in municipal solid waste incinerator

T/ACEF 066-2023 生活垃圾焚烧厂SCR脱硝催化剂运行管理及循环利用技术规范

范围、规范性引用文件、术语和定义、总体要求、运行要求、催化剂寿命管理、催化剂再生、报废催化剂处理。

Technical specification for SCR catalysts operation management and recycling of municipal solid waste incineration power plants

DB43/T 2527-2022 废铅蓄电池破碎分选及湿法预处理装备技术要求

Technical requirements for waste lead battery crushing, sorting and wet pretreatment equipment

T/ZZB 2967-2022 室内金属垃圾箱

本文件规定了室内金属垃圾箱的型号命名方法、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及质量承诺。 本文件适用于办公、家庭和酒店客房等室内场所，有效容积不大于 200L 的金属垃圾箱。类似的非金属垃圾箱可参照使用。

Indoor metal waste container

T/YWEISA 001-2022 装配式不锈钢水处理构筑物安装技术规程

前言 1  范围 2  规范性引用文件 3  术语和定义 4  模块要求 5  运输和防护 6  施工安装 6.1  一般规定 6.2  施工组织机构与人员配置 6.3  进度管理 6.4  施工准备 6.5  吊装 6.6  安装 6.7  焊接 6.8  设备与管线安装 6.9  偏差及检验 7  施工安全 8  应急预案 9  环境保护 10  质量验收 10.1  一般规定 10.2  预制模块 10.3  安装与连接 10.4  设备与管线安装 11  使用维护

Technical code of practice for installation of prefabricated stainless steel water treatment structure

DB3303/T 056-2022 建筑垃圾收运处置规范

Specifications for the collection, transportation and disposal of construction waste

ASTM D6523-22 卫生填埋场替代日常覆盖物（ADC）的评估和选择标准指南

1.1 This guide is intended to assist specifiers and end users in assessing the different options available for sanitary landfill daily cover materials described as alternative (non-soil) daily covers (ADCs). Traditional daily cover consists of at least 6 in. (15 cm) of soil spread over the working faces of sanitary landfills. Alternative systems are attractive to landfill operations in order to conserve landfill disposal space, among other reasons. 1.2 This guide assists in understanding different performance features of broad classifications of ADCs, and determining the extent and degree to which different ADCs are able to “control disease vectors, fires, odors, blowing litter, and scavenging, without presenting a threat to human health and the environment,” as intended by United States Environmental Protection Agency (USEPA) regulations. 1.3 This guide is not intended to provide cost information regarding the various ADCs. As a standard guide, it does not dictate a protocol for the practice and testing of ADCs, but rather provides valuable information, guidance, and recommendations to interested parties concerning the many options available. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4.1 Exception—Metric units are used in 6.2.9.2. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills

T/ZS 0359-2022 再生资源回收站点管理规范

前  言　 1  范围　 2  规范性引用文件　 3  术语和定义　 4  基本要求　 5  设置要求　 6  设施设备要求　 6.1  一般要求　 6.2  衡器要求　 6.3  运输设备要求　 6.4  消防设备要求　 7  人员要求　 8  回收行为要求　 9  经营管理要求　 9.1  经营资质　 9.2  内部要求　 9.3  信息管理　

Specification for management of renewable resource recovery site

T/ACEF 041-2022 废弃电器电子产品拆解处理过程视频图像采集分析技术规范

本文件规定了废弃电器电子产品拆解处理过程视频图像采集分析的基本规定、视频图像采集、视频图像识别分析、智能化辅助审核等技术内容。

Technical specification for video and image collection and analysis in the disassembly and treatment process of waste electrical and electronic equipment

T/IGIA 010-2022 智慧绿色垃圾房建设与运维

本标准规定了智慧绿色垃圾房的建设和运维管理。

Smart green garbage room construction and operation and maintenance

T/EES 0013-2022 生活垃圾闪蒸矿化处理器

本文件适用于处理不便于集中收集、转运、处置的生活垃圾且日处理量低于2吨的非焚烧低温处理设施的生产制造。

Flash mineralization processor for domestic waste

ASTM E2060-22 无机废物固化/稳定用煤燃烧产物的使用标准指南

1.1 This guide covers methods for selection and application of coal combustion products (CCPs) for use in the chemical stabilization of trace elements in wastes and wastewater. These elements include, but are not limited to, arsenic, barium, boron, cadmium, chromium, cobalt, lead, molybdenum, nickel, selenium, vanadium, and zinc. Chemical stabilization may be accompanied by solidification of the waste treated. Solidification is not a requirement for the stabilization of many trace elements, but does offer advantages in waste handling and in reduced permeability of the stabilized waste. 1.1.1 Solidification is an important factor in treatment of wastes and especially wastewaters. Solidification/Stabilization (S/S) technology is often used to treat wastes containing free liquids. This guide addresses the use of CCPs as a stabilizing agent (with or without the addition of other materials. Stabilization may be achieved by using combinations of CCPs and other products such as lime, lime kiln dust, cement kiln dust, cement, and others. CCPs used alone or in combination with other reagents promote stabilization of many inorganic constituents through a variety of mechanisms. These mechanisms include precipitation as hydrates, carbonates, silicates, sulfates, and so forth; microencapsulation of the waste particles through pozzolanic reactions; formation of metal precipitates; and formation of hydrated phases (1-4).2 Long-term performance of the stabilized waste is an issue that must be addressed in considering any S/S technology. In this guide, several tests are recommended to aid in evaluating the long-term performance of the stabilized wastes. 1.2 The CCPs that are suited for this application include fly ash, dry flue gas desulfurization (FGD) material, and and fluidized-bed combustion (FBC) ash. 1.3 The wastes or wastewater, or both, containing the inorganic species may be highly variable, so the chemical characteristics of the waste or wastewater to be treated must be determined and considered in the selection and application of any stabilizing agent, including CCPs. In any waste stabilization process, laboratory-scale tests for compatibility between the candidate waste or wastewater for stabilization with one or more selected CCPs and final waste stability are recommended prior to pilot-scale and full-scale application of the stabilizing agent. 1.4 This guide does not intend to recommend pilot-scale or full-scale processes or procedures for waste stabilization. Full-scale processes should be designed and carried out by qualified scientists, engineers, and environmental professionals. It is recommended that stabilized materials generated at the full-scale stabilization site be subjected to testing to verify laboratory test results. 1.5 The utilization of CCPs under this guide is a component of a pollution prevention program. Utilization of CCPs in this manner conserves land, natural resources, and energy. 1.6 This guide applies only to CCPs produced primarily from the combustion of coal. It does not apply to ash or other combustion products derived from the burning of waste; coal coking byproducts; municipal, industrial, or commercial garbage; sewage sludge or other refuse, or both; derived fuels; wood waste products; rice hulls; agricultural waste; or other noncoal fuels. 1.7 Regulations governing the use of CCPs vary by nation, state and locality. The user of this guide has the responsibility to determine and comply with applicable regulations. 1.8 It is recommended that work performed under this guide be designed and carried out by qualified scientists, engineers, and environmental professionals. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the 1 This guide is under the jurisdiction of ASTM Committee E50 on Environmental Assessment, Risk Management and Corrective Action and is the direct responsibility of Subcommittee E50.03 on Beneficial Use. Current edition approved Nov. 1, 2022. Published December 2022. Originally approved in 2000. Last previous edition approved in 2014 as F2060 – 06(2014). DOI: 10.1520/E2060-22. 2 The boldface numbers in parentheses refer to the list of references at the end of the text. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes

T/EES 0011-2022 质 量 分 级 及 “ 领 跑 者 ” 评 价 要 求 小 型 非 焚 烧 垃 圾 处 理 器

本文件适用于小型非焚烧垃圾处理器（处理量小于等于 10t、温度小于等于 200℃）质量和企业标准水平评价。相关机构开展质量分级和企业标准水平评估、“领跑者”评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。

Assessment requirements for quality grading and forerunnerSmall non-incineration waste disposal

T/SHDSGY 038-2022 活性炭吸附氮气脱附冷凝回收技术规范

本文件规定了活性炭吸附氮气脱附冷凝回收技术的工作原理、工艺流程、应用范围、技术要求及运行维护的相关要求。 本文件适用于石油化工、制药、印刷、喷涂等行业 VOCs 处理所应用的活性炭吸附氮气脱附冷凝回收技术。

Technical specification for activated carbon adsorption nitrogen desorption condensation recovery