13.030.40 废物处置和处理设备和装置 标准查询与下载

T/ZZB C003-2022 资源型有机垃圾生化处理设备

本文件规定了资源型有机垃圾生化处理设备（以下简称生化处理机）的术语和定义、型式与基本参数、使用条件、技术要求、试验方法、检验规则、标志、说明书、包装、贮存及运输和质量承诺。  本文件适用于使用微生物菌剂对有机类生活垃圾进行资源化处理的设备。

Resource type biological processor for organic waste

T/CI 041-2022 村镇垃圾移动热解装备设计及运行指南

4.1设计前基本资料准备 4.1.1目标村镇地区的地理环境，包括气温、降水量、风速、风向等，其对村镇地区所产生垃圾的含水率、主要成分有着重要影响，也对垃圾热解处理设备预处理系统以及污染控制系统的设计提供一定参考。 4.1.2目标村镇常住人口数量。村镇地区人均生活垃圾日产量为0.7-1.1 kg/(人d)，以此估算村镇垃圾产量规模与波动范围。单个移动式小型垃圾热解装置日处理量应小于10吨/天。超出此范围装置负荷过重，热解产物无法实现有效利用，移动热解装备无法适应村镇道路条件。 4.1.3村镇垃圾性质与主要来源（如餐厨垃圾、旅游垃圾、建筑垃圾等）。作为村镇垃圾热解预处理分选的基本条件，据此来确定适宜的垃圾分选方案。 4.1.4县域的村镇分布状况以及村镇地区的道路交通情况。分析确定垃圾移动热解装置的应用区域范围，并确保应用该装置的村镇地区具备道路通行条件。 4.1.5村镇应急垃圾产生情况。当村镇垃圾因下列原因出现短期激增现象时，可考虑使用移动热解装置进行就地、快速、清洁、无害化处理。 a)　旅游项目开发或节假日，导致旅游垃圾剧增。 b)　民俗活动或节日庆典，导致生活垃圾剧增。

The guidance on the design and operation of the movable pyrolyzer for rural garbage treatment

T/ZZB Q048-2022 分散式有机垃圾生物处理技术规范

本文件规定了分散式有机垃圾生物处理技术规范的术语和定义、总则、基本规定、分类、垃圾接收、输送与预处理、生物处理、产出物、环境保护。 本文件适用于日处理量不大于30吨分散式有机垃圾的生物处理。

Technical Specification for Biological Treatment of Decentralized Organic Waste

T/GDES 75-2022 智能垃圾分类回收箱

本文件规定了智能垃圾分类回收箱的工作条件、外观、结构、功能、性能等要求，以及试验方法、 检验规则、标志、包装、运输、贮存和安装等内容。 本文件适用于对生活垃圾进行分类回收的智能垃圾分类回收箱的生产。

Intelligent garbage sorting and recycling bin

T/ZACA 048-2022 分散式有机垃圾生物处理技术规范

本文件规定了分散式有机垃圾生物处理技术规范的术语和定义、总则、基本规定、分类、垃圾接收、输送与预处理、生物处理、产出物、环境保护。

Technical Specification for Biological Treatment of Decentralized Organic Waste

KS A ISO 11599-2022 含有嵌入放射性废物的水硬性粘合剂的气孔率和透气率的测定

Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste

T/CASMES 62-2022 移动式垃圾压缩箱动力站

本文件规定了移动式垃圾压缩箱动力站的组成、基本参数、要求、测试方法、检验规则、标志、随行文件、包装、运输、贮存。 本文件适用于移动式垃圾压缩箱动力站的设计、制造和检验（以下简称“动力站”或“受试样品”）

Electro-hydraulic control system for mobile garbage compactor

DB11/T 1234-2022 生活垃圾焚烧处理能源消耗限额

Energy consumption limit for domestic waste incineration treatment

T/ZZB 2737-2022 畜禽粪便发酵处理机

本文件规定了畜禽粪便发酵处理机的术语和定义、产品型号、结构和基本参数、基本要求、技术要求、试验方法、检验规则、标牌、包装、运输和贮存及质量承诺。 本文件适用于对畜禽粪便进行发酵处理的罐式畜禽粪便发酵处理机（以下简称处理机），其他结构型式的处理机可参照执行。

Livestock and poultry manure fermentation machine

T/GIEHA 043-2022 有机固废蒸汽裂解碳化处理设备

本文件规定了有机固废蒸汽裂解碳化处理设备的术语、定义、技术要求、试验方法、检验规则以及包装、运输和贮存。适用于处理生活垃圾、医疗垃圾、工业垃圾、农业垃圾等固体有机废弃物的处置设备。

Organic solid waste steam cracking carbonization treatment equipment

GSO EN 12574-1:2022 固定式废物容器 第1部分：容量达 10 000 升、带平盖或圆顶盖、用于耳轴、双耳轴或袋式提升装置的容器 尺寸和设计

This part of EN 12574 specifies dimensions and requirements of stationary waste containers (in the text also called containers) without wheels or with wheels for positioning purposes only, with flat or dome lid(s) and capacities up to 10 000 l for trunnion, double trunnion or pocket lifting devices.

Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design

T/CAMIE 03-2022 水处理用磁介质

本文件规定了水处理用磁介质（以下简称磁介质）的术语和定义，规格分类与标记，技术要求，取样及样品制备，检验方法，检验规则，标志、包装、运输和贮存等。 本文件适用于污废水处理、水环境治理领域里磁介质混凝水处理工艺中使用的核心材料—磁介质。

Magnetic media powder for water treatment

GSO EN 12574-3:2022 固定式废物容器 第3部分：安全和健康要求

This part of EN 12574 specifies essential safety and health requirements for stationary waste containers (in the text also called containers), not including special containers for hazardous waste. NOTE To help in the understanding of the requirements they are not split into separate safety, ergonomic and health sections but are divided into chapters dealing with constructional units.

Stationary waste containers - Part 3: Safety and health requirements

GSO EN 12574-2:2022 固定式废物容器 第2部分：性能要求和测试方法

This part of EN 12574 specifies the test methods for stationary waste containers (in the text also called containers) according to prEN 12574-1. It also specifies the target requirements to be reached either during or after the tests.

Stationary waste containers - Part 2: Performance requirements and test methods

T/SDQE 048-2022 VOCs沸石转轮智能净化一体机

本文件规定了VOCs沸石转轮智能净化一体机的术语和定义、产品组成、型号和参数、技术要求、试验方法、检验规则、标志、随机文件、包装、运输和贮存等。

VOCs zeolite wheel intelligent purification all-in-one machine

ASTM D5680-14(2022) 桶或类似容器中未固结固体取样的标准实施规程

1.1 This practice covers typical equipment and methods for collecting samples of unconsolidated solids in drums or similar containers. These methods are adapted specifically for sampling drums having a volume of 110 U.S. gal (416 L) or less. These methods are applicable to hazardous material, product, or waste. Specific sample collection and handling requirements should be described in the site-specific work plan. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers

T/CAEE 006-2022 废复合材料热解处理设备评价技术规范

包括废复合材料热解处理设备评价的术语和定义、总则、评价指标、评价方法、评价报告。

Evaluation technical specification of pyrolysis processing facilities for waste composite materials

T/CAEE 002-2022 有机固体废物热解处理工艺评价导则

包括范围、规范性引用文件、术语、总则、评价指标、评价方法和程序

Technical Guidelines for The Evaluation of Pyrolysis Treatment of Organic Solid Wastes

ASTM F3215-22 食物垃圾脱水机标准规范

1.1 This specification covers dehydrators intended for removing liquid by evaporation from processed or unprocessed food scraps and limited amounts of cardboard, paper, and biodegradable food service ware. 1.2 The values as stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test method portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Food Waste Dehydrators

ASTM F1150-22 商业食品废料碎浆机和水压机组件的标准规范

1.1 This specification covers commercial pulping and waterpress assemblies intended for grinding of food scraps, paper, cardboard, and disposable plastic food-service ware. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test method portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly