13.030.40 废物处置和处理设备和装置 标准查询与下载

T/GIEHA 043-2022 有机固废蒸汽裂解碳化处理设备

本文件规定了有机固废蒸汽裂解碳化处理设备的术语、定义、技术要求、试验方法、检验规则以及包装、运输和贮存。适用于处理生活垃圾、医疗垃圾、工业垃圾、农业垃圾等固体有机废弃物的处置设备。

Organic solid waste steam cracking carbonization treatment equipment

GSO EN 12574-1:2022 固定式废物容器 第1部分：容量达 10 000 升、带平盖或圆顶盖、用于耳轴、双耳轴或袋式提升装置的容器 尺寸和设计

This part of EN 12574 specifies dimensions and requirements of stationary waste containers (in the text also called containers) without wheels or with wheels for positioning purposes only, with flat or dome lid(s) and capacities up to 10 000 l for trunnion, double trunnion or pocket lifting devices.

Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design

T/CAMIE 03-2022 水处理用磁介质

本文件规定了水处理用磁介质（以下简称磁介质）的术语和定义，规格分类与标记，技术要求，取样及样品制备，检验方法，检验规则，标志、包装、运输和贮存等。 本文件适用于污废水处理、水环境治理领域里磁介质混凝水处理工艺中使用的核心材料—磁介质。

Magnetic media powder for water treatment

GSO EN 12574-2:2022 固定式废物容器 第2部分：性能要求和测试方法

This part of EN 12574 specifies the test methods for stationary waste containers (in the text also called containers) according to prEN 12574-1. It also specifies the target requirements to be reached either during or after the tests.

Stationary waste containers - Part 2: Performance requirements and test methods

GSO EN 12574-3:2022 固定式废物容器 第3部分：安全和健康要求

This part of EN 12574 specifies essential safety and health requirements for stationary waste containers (in the text also called containers), not including special containers for hazardous waste. NOTE To help in the understanding of the requirements they are not split into separate safety, ergonomic and health sections but are divided into chapters dealing with constructional units.

Stationary waste containers - Part 3: Safety and health requirements

T/SDQE 048-2022 VOCs沸石转轮智能净化一体机

本文件规定了VOCs沸石转轮智能净化一体机的术语和定义、产品组成、型号和参数、技术要求、试验方法、检验规则、标志、随机文件、包装、运输和贮存等。

VOCs zeolite wheel intelligent purification all-in-one machine

ASTM D5680-14(2022) 桶或类似容器中未固结固体取样的标准实施规程

1.1 This practice covers typical equipment and methods for collecting samples of unconsolidated solids in drums or similar containers. These methods are adapted specifically for sampling drums having a volume of 110 U.S. gal (416 L) or less. These methods are applicable to hazardous material, product, or waste. Specific sample collection and handling requirements should be described in the site-specific work plan. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers

T/CAEE 006-2022 废复合材料热解处理设备评价技术规范

包括废复合材料热解处理设备评价的术语和定义、总则、评价指标、评价方法、评价报告。

Evaluation technical specification of pyrolysis processing facilities for waste composite materials

T/CAEE 002-2022 有机固体废物热解处理工艺评价导则

包括范围、规范性引用文件、术语、总则、评价指标、评价方法和程序

Technical Guidelines for The Evaluation of Pyrolysis Treatment of Organic Solid Wastes

ASTM F3215-22 食物垃圾脱水机标准规范

1.1 This specification covers dehydrators intended for removing liquid by evaporation from processed or unprocessed food scraps and limited amounts of cardboard, paper, and biodegradable food service ware. 1.2 The values as stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test method portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Food Waste Dehydrators

ASTM F1150-22 商业食品废料碎浆机和水压机组件的标准规范

1.1 This specification covers commercial pulping and waterpress assemblies intended for grinding of food scraps, paper, cardboard, and disposable plastic food-service ware. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat pertains only to the test method portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly

DB32/T 4244-2022 餐厨垃圾与生活垃圾焚烧协同处理技术标准

本标准适用于新建、改建或扩建协同处理工程的规划、设计、施工、验收及运营。

Technical standard for co-processing of food waste and domestic waste incineration

T/SHMHZQ 004-2022 固废垃圾焚烧无害化处理技术规范

4、技术要求 4.1 预处理 4.2 热分解过程 4.3 燃烧过程 4.4  排放控制 5、监测要求 5.1 比对监测遵循原则 5.2 比对监测方法 5.3 核查参数方法 5.4 比对监测结果评价 5.5 比对监测质量保证

Technical specification for harmless treatment of solid waste incineration

T/QGCML 257-2022 医院用真空管道污物输送系统

本标准规定了医院用真空管道污物输送系统的术语和定义、设计条件和设计基准、技术要求和检验等。 本标准适应于医院用真空管道污物输送系统的安装与使用。

Vacuum pipeline waste conveying system for hospital

T/ACEF 029-2022 垃圾焚烧电厂烟气高分子脱硝 工艺系统技术规范

系统构成 5.1 系统组成 5.2 储存及上料单元 5.3 计量及给料单元 5.4 输送单元 5.5 分配及喷射系统 5.6 流化风及冷却风系统 5.7 控制系统

Technical specification for flue gas polymer denitrification process system of waste incineration power plant

DB36/T 1546-2021 畜禽养殖废弃物第三方集中处理与资源化利用技术规范

Technical specifications for third-party centralized treatment and resource utilization of livestock and poultry breeding waste

T/CPCIF 0175-2021 树脂吸附法工业有机废气治理工程技术规范

5　总体要求 5.1　一般规定 5.1.1　树脂吸附法工业有机废气治理工程应遵循综合治理、循环利用、达标排放、总量控制的原则。治理工艺设计应遵循成熟可靠、技术先进、经济适用的原则，并考虑节能、安全和操作简便。 5.1.2　治理工程应与生产工艺水平相适应。生产企业应把治理设备作为生产系统的一部分进行管理，治理设备应与产生废气的相应生产设备同步运转。 5.1.3　经过治理后的污染物直接向环境排放时，应符合国家和地方相关大气污染物排放标准、排污许可、环境影响评价文件及其审批意见的规定。 5.1.4　治理工程在建设、运行过程中产生的废气、废水、废渣及其他污染物的治理与排放，应执行国家或地方生态环境保护法规和标准的相关规定，防止二次污染。 5.1.5　治理工程应按照国家和地方生态环境主管部门的要求设置在线连续监测设备。 5.2　工程构成 5.2.1　树脂吸附法工业有机废气治理工程由主体工程和辅助工程组成。 5.2.2　主体工程包括废气预处理、树脂吸附、树脂再生和解吸气体后处理单元。若治理过程中产生二次污染物，还应包括二次污染物治理设施。 5.2.3　辅助工程主要包括检测与过程控制、电气仪表和给排水等单元。 5.3　工程装置布置 5.3.1　树脂吸附法工业有机废气工程装置布置应符合厂区的整体生产布局规划。 5.3.2　工程装置布置应遵从污染源距离、风管布置便利性、承重要求、公用工程连接便利性、施工便利性、运行维护便利性等原则，并按照消防要求留出消防通道和安全保护距离。 5.3.3　工程装置的布置应尽可能集成紧凑，减少占地面积。

Technical specifications of resin adsorption method for industrial organic waste gas treatment project

T/CPCIF 0174-2021 含硝废硫酸原位再循环处理工程技术规程

5.3　装置构成 5.3.1　含硝废硫酸原位再循环处理装置通常包括硝酸浓缩或脱硝单元、硫酸浓缩单元、硝烟吸收单元。 5.3.2　硝酸浓缩或脱硝单元主要工艺设备包括脱硝塔（浓缩塔）、加热器、冷凝器、漂白塔和稀硝酸中间罐等。 5.3.3　硫酸浓缩单元主要工艺设备包括浓缩器、洗涤塔、酸酸换热器、成品酸冷却器、循环泵、闪蒸罐、废酸高位槽、酸性废水中间罐和硫酸中间罐等。 5.3.4　硝烟吸收单元主要工艺设备包括硝烟压缩机、硝烟吸收塔、消音塔、稀硝酸罐、换热器、循环泵等。 5.3.5　其他设施包括循环水、脱盐水、冷冻水等辅助设施，供电、供气、供汽等公用设施及废酸预处理设施等宜在界区外统一配套。

Technical specifications for insite-recycling treatment of waste sulfuric acid containing nitrate

T/CSAIA 005-2021 有机废硫酸利用处置污染控制技术规范

本文件规定了有机废硫酸贮存、运输、利用和处置过程的污染控制以及利用处置设施的运行管理要求。 本文件适用于有机废硫酸贮存、运输、利用和处置全过程的污染控制，并可用于指导有机废硫酸利用处置设施工程建设以及建成后的污染控制，以及开展有机废硫酸利用处置项目的环境影响评价、环境保护设施设计、竣工环境保护验收、排污许可管理、清洁生产审核、危险废物经营许可等过程中的污染控制及监测要求。

Technical Specifications for Pollution Control of Utilization and Disposal of Organic Waste Sulfuric Acid

T/STACAES 028-2021 生活垃圾焚烧厂检修管理规范

本文件主要技术内容： 1.基本要求规定了生活垃圾焚烧厂检修管理应符合GB/T 19001、GB/T 24001、GB/T 45001等7方面要求。 2.规定了检修方式和检修等级相关技术要求和指标。 3.规定了日常维护检修管理、定期计划检修管理、技术优化管理、检修过程管理、检修安全与质量管理、检修总结与检修后评估等技术要求。

Specifications for maintenance management of municipal solid waste incineration plant