13.040.20 环境空气 标准查询与下载

ISO 21626-3:2020 竹炭. 第3部分: 纯化应用

This document specifies the requirements and test methods of bamboo charcoal for air-purification applications.

Bamboo charcoal - Part 3: Purification applications

DS/ISO 16000-28:2020 室内空气 第28部分：使用试验箱测定建筑产品气味排放量

Indoor air – Part 28: Determination of odour emissions from building products using test chambers

DS/CEN/TR 17554:2020 环境空气—应用EN 16909测定PM10和PM粗粒中元素碳（EC）和有机碳（OC）

Ambient air – Application of EN 16909 for the determination of elemental carbon (EC) and organic carbon (OC) in PM10 and PMcoarse

BS ISO 16000-28:2020 室内空气. 利用试验箱进行的建筑产品异味排放测定

Indoor air. Determination of odour emissions from building products using test chambers

BS PD CEN/TR 17554:2020 环境空气 EN16909在PM10和PMcoarse中元素碳（EC）和有机碳（OC）测定中的应用

Ambient air. Application of EN 16909 for the determination of elemental carbon (EC) and organic carbon (OC) in PM10 and PMcoarse

PN-EN 17346-2020-11 E 环境空气 使用扩散取样器测定氨浓度的标准方法

Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers

ISO 16000-28:2020 室内空气. 第28部分: 测定建筑产品气味排放使用测试室\r\n\r\n

Indoor air - Part 28: Determination of odour emissions from building products using test chambers

SN EN 17346-2020 环境空气 使用扩散取样器测定氨浓度的标准方法

Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

PD CEN/TR 17554:2020 环境空气 应用 EN 16909 测定 PM10 和 PMcoarse 中的元素碳（EC）和有机碳（OC）

Ambient air - Application of EN 16909 for the determination of elemental carbon (EC) and organic carbon (OC) in PM10 and PMcoarse

LST EN 17359-2020 固定源排放 生物气溶胶和生物制剂 生物气溶胶的采样和液体中的收集 冲击法

Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method

T/CSES 09-2020 燃煤电厂大气污染物超低排放技术验证评价规范

本文件规定了燃煤电厂大气污染物超低排放技术的资料收集、验证评价指标、验证测试要求、验证评价。 具体技术内容包括： （1）范围 （2）规范性引用文件 （3）术语和定义 （4）总则 （5）资料收集 （6）验证评价指标 （7）验证测试要求 （8）验证评价

Specification for verification for air pollutants ultra-low emission technologies of coal-fired power plants

DB11/T 485-2020 集中空调通风系统卫生管理规范

Hygienic management specification for central air-conditioning and ventilation system

ASTM D3162-12(2020) 大气中一氧化碳的标准测试方法（通过非分散红外光谱法连续测量）

Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)

ASTM D2913-20 大气中硫醇含量的标准测试方法

1.1 This test method is for the measurement of mercaptans (organic thiols) in the atmosphere at concentrations below 100 parts per billion (ppb(v) = 195 µg/m3 ). For concentrations above 100 ppb(v), the sampling period can be reduced or the trapping liquid volume increased either before or after aspirating. (See Practice D1357 for sampling guidance.) The minimum detectable amount of methyl mercaptan is 0.04 µg/mL (1)2 in a final liquid volume of 25 mL. When sampling air at the maximum recommended rate of 2 L/min for 2 h, the minimum detectable mercaptan concentration is 1.0 ppb(v) (1.95 µg methyl mercaptan/m3 at 101.3 kPa (760 mm Hg) and 25°C). This test method determines total mercaptans and does not differentiate among individual mercaptans, although it is most sensitive to the lower molecular weight alkanethiols. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 8.7, 8.8, and Section 9. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Mercaptan Content of the Atmosphere

BS EN 17359:2020 固定源排放 生物气溶胶和生物制剂 生物气溶胶采样和液体收集 冲击法

What is BS EN 17359 about?    BS EN 17359 discusses stationary source emissions on bioaerosols and biological agents. BS EN 17359 contains specifications for an active sampling of bioaerosols from exhaust air flowing through a defined cross-section of a stack. BS EN 17359 defines general principles that have to be considered during an isokinetic sampling campaign for bioaerosols by bubbling the exhaust air through a specific impinger designed for emission measurements. BS EN 17359 applies with culturable organisms that is specified, but the same principle might be applicable for non-cultural based methods (e.g. molecular and/or enzyme-based methods).   The impinger is designed to allow a sample volume flow of 1 m3/h to 1,8 m3/h or 16 l/min to 30 l/min, respectively, and has been tested with regard to various microorganisms within the broad concentration ranges [1; 2; 3; 4].

Stationary source emissions. Bioaerosols and biological agents. Sampling of bioaerosols and collection in liquids. Impingement method

DB37/T 4078-2020 环境空气 挥发性有机物连续监测 气相色谱-氢火焰离子化检测器/质谱检测器联用法

Continuous monitoring of volatile organic compounds in ambient air by gas chromatography-hydrogen flame ionization detector/mass spectrometry detector

KS I ISO 16000-11-2020 室内空气第11部分:建筑产品和家具中挥发性有机化合物排放量的测定样品的取样、贮存和试样的制备

Indoor air ― Part 11: Determination of the emission of volatile organic compounds from building products and furnishing ―Sampling, storage of samples and preparation of test specimens

KS I ISO 16000-8-2020 室内空气 - 第8部分:建筑物空气中局部平均年龄的确定 用于表征通风条件

Indoor air — Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions

KS I ISO 16000-11:2020 室内空气第11部分:建筑产品和家具中挥发性有机化合物排放量的测定样品的取样、贮存和试样的制备

Indoor air ― Part 11: Determination of the emission of volatile organic compounds from building products and furnishing ―Sampling, storage of samples and preparation of test specimens

KS I ISO 16000-10:2020 室内空气 - 第10部分:建筑产品和家具中挥发性有机化合物的排放测定 - 排放测试池方法

Indoor air — Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method