13.060.30 污水 标准查询与下载

GB 13458-2001 合成氨工业水污染物排放标准

本标准适用于合成氨企业（包括合成氨、尿素、硝酸氨、碳酸氢氨）的排放管理，以及建设项目环境影响评价、设计、竣工验收及其建成后的排放管理。

Discharge standard of water pollutants for ammonia industry

GB 3544-2001 造纸工业水污染物排放标准

本标准适用于造纸工业的制浆、造纸和制浆造纸联合企业的废水排放管理，以及造纸工业建设项目环境影响评价、建设项目环境保护设施设计、竣工验收及其投产后的废水排放管理。

Discharge standard of water pollutants for paper industry

GB 4287-1992 纺织染整工业水污染物排放标准

本标准规定了金属材料及其他相关固体材料热膨胀特征参数测量方法的定义及符号、原理、测试装置与要求、试样制备、膨胀仪校正、测量程序、测量结果计算、试验报告、精度与偏差等。 本标准适用于借助由同种熔融石英载体与推杆构成的组件，在-180～900℃温度范围内，检测金属材料试样的线性热膨胀，也适用于陶瓷、耐火材料、玻璃、岩石等具有刚性固体特征的试样的线性热膨胀的检测；若改用高纯度氧化铝的组件，温度范围可扩至1600℃；改用各向同性的石墨，则可扩至2500℃。

Discharge standard of water pollutants for dyeing and finishing of textile industry

GB 13458-1992 合成氨工业水污染物排放标准

Discharge standard of water pollutants for ammonia industry

GB 9135-1988 轻水堆核电厂放射性废液处理系统技术规定

本标准规定了轻水堆核电厂放射性废液处理系统（以下简称本系统）的设计、建造和运行的最低技术要求。 本标准适用于轻水堆核电厂放射性废液处理系统的设计、建造和运行。对类似反应堆的放射性废液处理系统亦应参照使用。

The technical rules about radioactive waste processing system for light water reactor plants

GB/T 3839-1983 制订地方水污染物排放标准的技术原则与方法

本标准是国家环境基础标准，适用于制订排入江、河、湖、水库等地面水的污染物排放标准。各地制订地方水污染物排放标准，除应执行本标准的规定外，尚需执行国家有关环境保护的方针、政策和规定等。

Technological principle and methods for enactment of local water pollutant emission standard

BS EN 12255-8:2024 污水处理厂 污泥处理和储存

1   Scope This document specifies design principles and performance requirements for sludge treatment and storage facilities at wastewater treatment plants serving more than 50 PT. Guidance on operation is provided where it is necessary in order to facilitate the design of control and automation and design access to points of operation. NOTE Other sludges and organic wastes can be treated together with municipal sewage sludge where national and local regulations permit.

Wastewater treatment plants - Sludge treatment and storage

T/CSTE 0601-2024 水处理用聚氨酯膜微孔曝气器

本文件规定了水处理用聚氨酯膜微孔曝气器的分类与型号、工作条件、要求、试验方法、检验规则、 标志、包装、运输和贮存。 本文件适用于水处理用聚氨酯膜微孔曝气器（以下简称聚氨酯膜微孔曝气器）的生产和检验。

Polyurethane membrane microporous aerator for water treatment

T/EERT 046-2004 山塘淡水养殖水体原位修复技术规范

本文件规定了山塘淡水养殖水体原位修复技术的术语和定义、技术要求、控制要求、运行与维护等内容。

Technical specifications for in-situ restoration of freshwater aquaculture waterbodies in mountain ponds

T/EERT 047-2024 淡水池塘养殖尾水生物强化脱氮技术规范

本文件规定了淡水池塘养殖尾水生物强化脱氮技术的术语和定义、技术要求、控制要求、运行与维护等内容。

Technical specification for bioenhanced denitrification of freshwater aquaculture tails in ponds

T/CAMER 032-2024 医疗机构污水处理工程升级改造技术规程

1 范围 2 规范性引用文件 3 术语和定义  4 总体要求  5 技术要求 6 施工、调试与验收 7 运行管理 

Technical specifications for upgrading and renovating sewage treatment projects in medical organization

DB32/T 4751-2024 污水生物处理系统能效评价方法

Energy efficiency evaluation method of wastewater biological treatment system

GSO ISO 16075-1:2024 灌溉项目废水处理利用指南 第1部分：灌溉再利用项目的基础

This document contains guidelines for the development and the execution of projects intending to use treated wastewater (TWW) for irrigation and considers the parameters of climate and soil. The purpose of this document is to provide guidance on all elements of a project using TWW for unrestricted and restricted irrigation, including design, materials, construction, and performance, when used for the following: — irrigation of agricultural crops; — irrigation of public and private gardens and landscape areas, including parks, sport fields, golf courses, cemeteries, etc. These guidelines are intended to provide assistance for the benefit of users of TWW for irrigation. The guidelines relate to the widespread and common ranges of water quality rather than exceptional or unique ones and are intended for the use of professionals, such as irrigation companies (designers and operators), agricultural extension officers or advisors, water companies (designers and operators), local authorities and water utilities. The use of these guidelines by users might require additional specifications. None of the parts of this document are intended to be used for certification purposes. These guidelines suggest the parameters of TWW quality. These parameters include the following: — agronomic parameters: nutrients (nitrogen, phosphorus and potassium), salinity factors (total salt content, chloride, boron, and sodium concentration) and heavy metals' concentration; — pathogen presence. Each of these parameters can have possible impacts on the crops, soil, and public health. The guidelines discuss the possibility of preventing the contaminants' addition during wastewater production and the ability to remove them during the course of treatment. Contaminants of emerging concern (such as pharmaceuticals and personal care product residuals) are outside the scope of this document since up to day, there is no evidence of adverse effects on human health or environment via irrigation with TWW or via the consumption of crops irrigated with TWW. The project should be designed in accordance with the sanitary quality of the TWW in order to avoid disease transmission by the pathogens in the water. The use of these guidelines is encouraged to ensure consistency within any organization engaged in the use of treated wastewater. These guidelines provide the basis for a healthy, hydrological, environmental and agronomic conscious design, operation, monitoring, and maintenance of an irrigation system using treated wastewater.

Guidelines for treated wastewater use for irrigation projects — Part 1: The basis of a reuse project for irrigation

T/AHEPI 0004-2024 治理恶臭和控制异味的复合微生物菌剂的技术要求

本文件规定了治理恶臭和控制异味的复合微生物菌剂的术语和定义、菌剂要求、微生物菌剂使用、 运输与贮存。 本文件适用于有组织排放的恶臭气体生物滤池治理以及环境风速低于8m/s、浓度在10mg/m3以下的 恶臭气体无组织排放过程中，异味控制的微生物菌剂的使用。

The technical method of treating odors with compound microbial inoculant

T/CASME 1436-2024 一体化膜生物反应污水处理设备

本文件规定了一体化膜生物反应污水处理设备的术语和定义、分类、材料、适用条件、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Integrated membrane biological reaction sewage treatment equipment

ASTM E1200-24 保存浮游动物样品的标准操作规程

1.1  This practice describes the proper procedures for preserving zooplankton samples with either formaldehyde, ethanol, glutaraldehyde, Lugol’s iodine solution, or vinegar (acetic acid). 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Preserving Zooplankton Samples

ASTM E1199-24 使用 Clarke-Bumpus 浮游生物采样器对浮游动物进行采样的标准操作规程

1.1  This practice covers the procedures for obtaining quantitative samples of a zooplankton community by use of a Clarke-Bumpus plankton sampler. 1.2  The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler

T/ACEF 139-2024 市政常用排水管材选型技术要求

前言、范围、规范性引用文件、术语和定义、基本规定、常用管材和管材选择。

Guide for selecting commonly used municipal drainage pipes

ASTM E1198-24 用泵对浮游动物进行采样的标准实施规程

Standard Practice for Sampling Zooplankton with Pumps

BS EN 12255-5:2024 废水处理厂 泻湖工艺

Wastewater treatment plants - Lagooning processes