13.080.99 有关土质的其他标准 标准查询与下载

DB11/T 864-2020 园林绿化种植土壤技术要求

Landscaping planting soil technical requirements

DB51/T 2723-2020 四川省耕地质量等级评价技术规范

本文件规定了四川省耕地质量等级评价的内容和方法。 本文件适用于四川省县级及以上行政区域耕地质量等级评价，乡镇级行政区域耕地质量等级评价可参照执行。

Technical Specifications for Grade Evaluation of Cultivated Land Quality in Sichuan Province

DB13/T 5212-2020 草莓土壤生态修复技术规程

Strawberry Soil Ecological Restoration Technical Regulations

DB13/T 5211-2020 山药土壤生态修复技术规程

Technical specification for yam soil ecological restoration

ASTM D8170-20 挥发性有机分析用土壤收集和储存用一次性手持式土壤芯取样器的标准指南

1.1 This guide is intended for application to soils that may contain volatile organic compounds. 1.2 This guide provides a general procedure and considerations associated with using a disposable handheld soil core sampler to collect and temporarily store a soil sample for volatile organic analysis. 1.3 In general, an initial soil sample is collected (see Guides D6169/D6169M and D6282/D6282M) and the disposable handheld soil core sampler is then used to collect the 5 or 25 g soil sample from the initial soil core sample. The disposable handheld soil core sampler can also serve as a sample storage chamber. It is recommended that this standard be used in conjunction with Guides D4547, D4687, D6169/D6169M, D6232, D6282/D6282M, D6418, and D6640, as appropriate, which provide information on the collection of the initial soil core sample. 1.4 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026. Reporting of test results in units other than SI shall not be regarded as nonconformance with this standard. 1.5 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Using Disposable Handheld Soil Core Samplers for the Collection and Storage of Soil for Volatile Organic Analysis

ASTM D8199-20 侵蚀控制用液压纤维基产品比强度测定的标准试验方法

1.1 This standard provides a quantitative test method to determine the specific strength of hydraulically applied fiber matrix products using dry and wet preparation methods in a laboratory setting. This method is designed for use as an index test for product quality assurance or quality control, or both to comply with manufacturing requirements. This test method is not indicative of product performance in the field. 1.2 Units—The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only and are not considered standard. Reporting of test results in units other than SI shall not be regarded as nonconformance with this standard. 1.3 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026, unless superseded by this test method. 1.3.1 The procedures used to specify how data are collected/ recorded and calculated in the standard are regarded as the industry standard. In addition, they are representative of the significant digits that generally should be retained. The procedures used do not consider material variation, purpose for obtaining the data, special purpose studies, or any considerations for the user’s objectives; and it is common practice to increase or reduce significant digits of reported data to be commensurate with these considerations. It is beyond the scope of these test methods to consider significant digits used in analysis methods for engineering data. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control

ASTM D6286/D6286M-20 岩土工程和环境地下场地特征的钻探和直接推进方法选择的标准指南

1.1 This guide provides descriptions of various methods for site characterization along with advantages and disadvantages associated with each method discussed. This guide is intended to aid in the selection of drilling method(s) for geotechnical and environmental soil and rock borings for sampling, testing, and installation of wells, or other instrumentation. It does not address drilling for foundation improvement, drinking water wells, or special horizontal drilling techniques for utilities. 1.2 This guide cannot address all possible subsurface conditions that may occur such as, geologic, topographic, climatic, or anthropogenic. Site evaluation for engineering, design, and construction purposes is addressed in Guide D420. Soil and rock sampling in drill holes is addressed in Guide D6169/ D6169M. Pertinent guides and practices addressing specific drilling methods, equipment, and procedures are listed in Section 2. Guide D5730 provides information on most all aspects of environmental site characterization. 1.3 The values stated in either SI units or inch-pound units (given in brackets) are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This guide does not purport to comprehensively address all methods and the issues associated with drilling for geotechnical and environmental purposes. Users should seek qualified professionals for decisions as to the proper equipment and methods that would be most successful for their site investigation. Other methods may be available for these methods and qualified professionals should have flexibility to exercise judgment as to possible alternatives not covered in this guide. The guide is current at the time of issue, but new alternative methods may become available prior to revisions. Therefore, users should consult with manufacturers or producers prior to specifying program requirements. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5.1 Drilling operators generally are required to be trained for safety requirements such as those of construction and environmental occupational safety programs dictated by country, regional, or local requirements such as the US. OSHA training programs. Drilling safety programs are also available from the National Drilling Association (NDA4U.com) or other country drilling associations.2 1.6 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education and experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 This guide is under the jurisdiction of ASTM Committee D18 on Soil and Rock and is the direct responsibility of Subcommittee D18.21 on Groundwater and Vadose Zone Investigations. Current edition approved May 1, 2020. Published May 2020. Originally approved in 1998. Last previous edition approved in 2019 as D6286 – 19. DOI: 10.1520/D6286_D6286M-20. 2 “Drilling Safety Guide,” National Drilling Federation, Columbia, SC, 1985, p. 36. *A Summary of Changes section appears at the end of this standard Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 

Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization

ASTM C1733-20 用间歇法测定无机物分布系数的标准试验方法

Standard Test Method for Distribution Coefficients of Inorganic Species by Batch Method

T/CAEPI 22-2019 污染地块修复工程环境监理技术指南

本标准规定了污染地块修复工程环境监理的基本原则、程序、内容、方法、制度以及环境监理报告。 本标准适用于污染地块修复工程实施阶段的环境监理。 本标准不适用于放射性污染和致病性生物污染地块修复工程的环境监理。

Environmental Supervision Technical Guidelines for Contaminated Land Restoration Projects

ASTM D6286-19 岩土工程和环境地下场地特征的钻探和直接推进方法选择的标准指南

Standard Guide for Selection of Drilling and Direct Push Methods for Geotechnical and Environmental Subsurface Site Characterization

BS ISO 15800:2019 土壤质量 土壤与人类接触的表征

What is this ISO 15800 -  H uman exposure to soil about? ISO 15800 provides guidance on the type and extent of soil characterization necessary for the evaluation of human exposure to substances present in possibly leading to adverse effects. Background information is provided on human health related to exposure to soil and the influence on exposure via different pathways. ISO 15800 provides information that depends on the type and concentration of the substance, the relevant soil parameters, and the type of exposure relevant for the area investigated, represented in the conceptual site model (CSM). Furthermore, the sampling method and strategies can depend on the use of the project area and the possible exposure patterns. Note: ISO 15800 does not provide guidance on: The design or selection of numerical models that can be used to estimate exposure Potential exposure to radioactivity, pathogens, or asbestos in soil Who is ISO 15800 -  Human exposure to soil for ? ISO 15800 on human exposure to soil is useful for: Health professionals Soil scientists Soil laboratories Health and safety inspectors Owners and users of the site Why should you use ISO 15800 -  Human exposure to soil ? Characterizations of soils and sites relating to human exposure are performed all over the world. They are often planned and conducted by consultancies and expert organizations. Information from these characterizations is used to assess human exposure. ISO 15800 provides guidance on the types of information that might be require...

Soil quality. Characterization of soil with respect to human exposure

ISO 15800:2019 土壤质量 - 土壤对人体暴露的表征

This document provides guidance on the type and extent of soil characterization necessary for the evaluation of human exposure to substances present in possibly leading to adverse effects. It does not provide guidance on: — the design or selection of numerical models that can be used to estimate exposure; — potential exposure to radioactivity, pathogens or asbestos in soil. Background information is provided on human health related to exposure to soil and the influence on exposure via different pathways. NOTE 1 For convenience “soil” in this document also includes “soil material” unless stated otherwise. NOTE 2 Overall exposure can be due to potentially harmful substances (PHSs) in soil, groundwater and air. Exposure to those in soil can be direct (e.g. through inhalation, ingestion, cutaneous contact), or indirect (through the consumption of plants or animals that have taken up substances of concern). NOTE 3 The evaluation of the possible impact on human health of potentially harmful substances is most commonly required when these are present as a result of human activity (e.g. on old industrial sites) but can sometimes be required when they are present naturally. NOTE 4 Soil characterization precedes the assessment of the compatibility between soil and its use (i.e. soil quality assessment). Tools such as a conceptual site model (CSM) and health risk assessment can be used to aid this assessment. NOTE 5 Soil characterization can be used to develop an overview of population exposure to soil. Other International Standards are available that can aid the characterization of other media (e.g. surface and groundwater), in terms of their possible adverse effects on humans.

Soil quality — Characterization of soil with respect to human exposure

DB44/T 2171-2019 河道淤泥固化处置技术规范

本标准规定了河道淤泥固化处置技术的总则、淤泥预处理、淤泥处理与处置、取样与检测、储存与运输、环境与安全管理。 本标准适用于河道淤泥固化处置规划、设计、施工、运行和管理。湖泊、水库疏浚过程中产生的淤泥的固化处置可参照执行。

Technical specification for solidification and disposal of river silt

ASTM D8199-19 侵蚀控制用液压纤维基产品比强度测定的标准试验方法

Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control

BS ISO 15176:2019 关于挖掘出的土壤和其他用于再利用的材料的表征指南

What is ISO 15176- Characterization of excavated soil about? ISO 15176 discusses excavated soil and other materials intended for re-use. ISO 15176 provides guidance on the range of tests that could be necessary to characterize soil and other soil materials intended to be re-used, with or without preliminary treatment (e.g., screening to remove over large material). ISO 15176 is intended to be of use in determining the suitability of soil materials for re-use and the assessment of the environmental impacts that might arise from re-use. ISO 15176 takes into account the different requirements of topsoil, sub-soil, and other soil materials such as sediments or treated soils. Soil materials include natural soils and other materials (e.g., fill, made ground) excavated, stripped, or otherwise removed from their original in-ground or above-ground location (e.g., stockpile), dredged materials, manufactured soils, and soil treated to remove or destroy contaminants. For manufactured soils, which are often made using excavated materials together with other materials such as “green waste”, the characteristics of the components and of the manufactured product might need to be determined. Note: Radiochemical and geotechnical aspects are not covered. Who is ISO 15176- Characterization of excavated soil for ? ISO 15176 on the characterization of excavated soil is useful for: Constructors / builders Road and rail constructors Ecologists and conservationists Soil testing laboratories Landowners Why should you use ISO 15176- Characterization of excavated soil ? Soils are the dynami...

Guidance on characterization of excavated soil and other materials intended for re-use

ASTM D8151-19e1 急性生态毒性试验用未风化的滚压和水力侵蚀控制产品（RECPs和HECPs）获得降雨径流的标准实施规程

1.1 This practice establishes the guidelines, requirements, and procedures for obtaining rainfall runoff of unvegetated rolled and hydraulic erosion control products (RECPs and HECPs) during bench-scale conditions from simulated rainfall to be sent out for acute ecotoxicity testing. 1.2 This practice obtains unvegetated erosion control product (ECP) runoff from rainsplash-induced erosion under benchscale conditions using bench-scale collection procedures. 1.3 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.4 All observed and calculated values shall conform to the guidelines for significant digits and rounding established in Practice D6026, unless superseded by this test method. 1.4.1 The procedures used to specify how data are collected/ recorded and calculated in the standard are regarded as the industry standard. In addition, they are representative of the significant digits that generally should be retained. The procedures used do not consider material variation, purpose for obtaining the data, special purpose studies, or any considerations for the user’s objectives; and it is common practice to increase or reduce significant digits of reported data to be commensurate with these considerations. It is beyond the scope of these test methods to consider significant digits used in analysis methods for engineering data. 1.5 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing

ASTM D8151-19 急性生态毒性试验用未风化的滚压和水力侵蚀控制产品（RECPs和HECPs）获得降雨径流的标准实施规程

Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing

KS I ISO 15176-2019 土壤质量 挖掘出的土壤和其他用于再利用的土壤材料的特性

Soil quality－Characterization of excavated soil and other soil materials intended for re-use

ISO 15176:2019 挖掘土壤和其他再利用材料特性指南

Guidance on characterization of excavated soil and other materials intended for re-use

DB35/T 1836-2019 耕地地力提升与保持技术规范

本标准规定了耕地地力提升与保持原则、地力提升与保持的土壤检验方法、地力提升与保持的土壤肥力指标、地力提升与保持目标、地力提升与保持主要技术。 本标准适用于福建省水田、旱地，包括黏、酸、浅、砂、瘦等类的耕地地力提升与保持。

Cultivated land fertility improvement and maintenance technical specifications