13.220.99 有关消防的其他标准 标准查询与下载

DIN EN 12101-6:2005 烟和热控制系统.第6部分:压差系统组件规范

This Standard describes pressure differential systems designed to hold back smoke at a leaky physical barrier in a building, such as a door (either open or closed) or other similarly restricted openings. This Standard gives test procedures for the systems used, as well as describing relevant and critical features of the installation and commissioning procedures needed to implement the calculated design in a building.

Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits; German version EN 12101-6:2005

EN 12101-1:2005 烟和热控制系统 第1部分 挡烟隔板规范 合并修改件A1-2006

This European Standard applies to smoke barriers used within smoke and heat control systems, which include other equipment e.g. natural smoke and heat exhaust ventilators (EN 12101-2) and powered smoke and heat exhaust ventilators (EN 12101-3). Smoke barriers perform within specific time/temperature ranges.

Smoke and heat control systems - Part 1: Specification for smoke barriers Incorporates Amendment A1: 2006

BS EN 12101-6:2005 烟和热控制系统.压差系统规范.工具箱

This document specifies pressure differential systems designed to hold back smoke at a leaky physical barrier in a building, such as a door (either open or closed) or other similarly restricted openings. It covers methods for calculating the parameters of pressure differential smoke control systems as part of the design procedure. It gives test procedures for the systems used, as well as describing relevant, and critical, features of the installation and commissioning procedures needed to implement the calculated design in a building. It covers systems intended to protect means of escape such as stairwells, corridors and lobbies, as well as systems intended to provide a protected firefighting bridgehead for the Fire Services. The systems incorporate smoke control components in accordance with the relevant Parts of EN 12101 and kits comprising these and possibly other components (see 3.1.18). This document gives requirements and methods for the evaluation of conformity for such kits.

Smoke and heat control systems - Specification for pressure differential systems - Kits

EN 12101-6:2005 烟和热控制系统.第6部分:压差系统规范.工具箱;合并勘误表2006年8月

This document specifies pressure differential systems designed to hold back smoke at a leaky physical barrier in a building, such as a door (either open or closed) or other similarly restricted openings. It covers methods for calculating the parameters of pressure differential smoke control systems as part of the design procedure. It gives test procedures for the systems used, as well as describing relevant, and critical, features of the installation and commissioning procedures needed to implement the calculated design in a building. It covers systems intended to protect means of escape such as stairwells, corridors and lobbies, as well as systems intended to provide a protected firefighting bridgehead for the Fire Services. The systems incorporate smoke control components in accordance with the relevant Parts of EN 12101 and kits comprising these and possibly other components (see 3.8).This document gives requirements and methods for the evaluation of conformity for such kits.

Smoke and heat control systems - Part 6: Specification for pressure differential systems - Kits

EN 12101-10:2005 烟和热控制系统.第10部分:电源

This European Standard specifies requirements and gives test methods for primary and secondary electrical and pneumatic power supply equipment, designed for use in smoke and heat control systems in buildings. It also provides for the evaluation of conformity of such equipment to the requirements of this European Standard.NOTE A summary of functions is given in Annex A.

Smoke and heat control systems - Part 10: Power supplies

DB15/ 353-2004 内蒙古自治区建筑消防设施检验规程

本标准适用于工业和民用建筑中消防设施的检验，不适用于生产和贮存火药、炸药、弹药、火工品等爆炸危险场所的消防设施检验。

Specification for builing fire service test in Autonomous Region Inner Mongolia

DB15/ 391-2004 惰性气体IG－541灭火系统技术规程

本规程适用于新建、改建和扩建的工业和民用建筑中设置的1G－541灭火系统的设计、施工及验收。

Technical specification of inert gas IG-541 extinguishing system

KS F ISO TR 9122-2:2004 燃烧排出的毒性试验.第2部分:燃烧排出物中确定急性吸入毒性用生物检定指南(基本原理、准则和方法)

이 규격은 화재 생성물의 급성 흡입 독성을 결정하는 데 적합한 방법에 대한 지식을 제공

Toxicity testing of fire effluents-Part 2:Guidelines for biological assays to determine the acute inhalation toxicity of fire effluents(basic principles, criteria and methodology)

KS F ISO TR 9122-3-2004(2014) 消防废水毒性试验第3部分:消防废水中气体和蒸汽的分析方法

Toxicity testing of fire effluents－Part 3：Methods for the analysis of gases and vapours in fire effluents

KS F ISO TR 9122-6-2004(2009) 火灾流出物的毒性试验第6部分:建筑物和运输火灾中毒性危害评估的调节器和规范指南

Toxicity testing of fire effluents－Part 6：Guidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport

KS F ISO TR 9122-4-2004(2014) 火灾流出物毒性试验第4部分:火灾模型（小型试验用呋喃类和燃烧装置）

Toxicity testing of fire effluents－Part 4：The fire model (furanaces and combustion apparatus used in small-scale testing)

KS F ISO TR 9122-5-2004(2014) 消防废物的毒性测试 - 第5部分:预防消防废物的毒性作用

Toxicity testing of fire effluents - Part 5 Prediction of toxic effects of fire effluents

KS F ISO TR 9122-4:2004 燃烧废物的毒性试验.第4部分:燃烧模式(小型试验中使用的燃烧炉和燃烧装置)

이 규격의 내용은 표준 시험에 사용되는 화재 모델의 사용에 대한 제안과 함께 화재 생성

Toxicity testing of fire effluents-Part 4:The fire model (furanaces and combustion apparatus used in small-scale testing)

KS F ISO TR 9122-1:2004 燃烧生成物毒性试验.第1部分:总则

이 규격은 화재에서의 독성 위험을 평가하기 위한 시험 방법을 개발하는 데 있어 필요한

Toxicity testing of fire effluents-Part 1:General

KS F ISO TR 9122-5:2004 燃烧生成物毒性试验.第5部分:预测燃烧生成物的毒性

이 규격은 화재 생성물 분위기의 독성 평가에 유용하게 사용될 수 있는 수학적인 모델링의

Toxicity testing of fire effluents - Part 5 Prediction of toxic effects of fire effluents

KS F ISO TR 9122-3:2004 燃烧废物的毒性试验.第3部分:燃烧废气和蒸气的分析方法

이 규격에서는 화재 생성물 중에서 일산화탄소(CO), 이산화탄소(CO2), 산소(O2)

Toxicity testing of fire effluents-Part 3:Methods for the analysis of gases and vapours in fire effluents

KS F ISO TR 9122-1-2004(2014) 火灾流出物毒性试验第1部分:总则

Toxicity testing of fire effluents－Part 1：General

KS F ISO TR 9122-2-2004(2014) 火灾流出物毒性试验第2部分:火灾流出物急性吸入毒性生物测定导则（基本原则、标准和方法）

Toxicity testing of fire effluents－Part 2：Guidelines for biological assays to determine the acute inhalation toxicity of fire effluents(basic principles, criteria and methodology)

ISO 13344:2004 火焰中致命毒性的评估

This International Standard provides a means for estimating the lethal toxic potency of the fire effluents produced from a material while exposed to the specific combustion conditions of a physical fire model. The lethal toxic potency values are specifically related to the fire model selected, the exposure scenario and the material evaluated. Lethal toxic potency values associated with 30-min exposures of rats are predicted using calculations which employ combustion atmosphere analytical data for carbon monoxide (CO), carbon dioxide (CO2), oxygen (O2) (vitiation) and, if present, hydrogen cyanide (HCN), hydrogen chloride (HCI), hydrogen bromide (HBr), hydrogen fluoride (HF), sulfur dioxide (SO2), nitrogen dioxide (NO2), acrolein and formaldehyde. If the fire effluent toxic potency cannot be attributed to the toxicants analysed, this is an indication that other toxicants or factors must be considered. This International Standard is applicable to the estimation of the lethal toxic potency of fire effluent atmospheres produced from materials, products or assemblies under controlled laboratory conditions and should not be used in isolation to describe or appraise the toxic hazard or risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire hazard assessment that takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use; see ISO/TS 19706. The intended use of fire safety-engineering calculations is for life-safety prediction for people and is most frequently for time intervals somewhat shorter than 30 min. This extrapolation across species and exposure intervals is outside the scope of this International Standard. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices.

Estimation of the lethal toxic potency of fire effluents

DB61/T 336~337-2003 陕西省山川秀美工程标准综合体（气象部分）

本规程适用于在山川秀美生态环境工程建设工程中，利用3S技术对陕西省辖区范围内土地利用、地表水体、植被、土壤侵蚀、土地荒漠化、小流域治理等变化情况进行定期监测，籍以检查工程总体规划及年度计划执行情况。对陕西省辖区内森林和草场火灾进行实时的动态监测。

Standard complex of beautiful mountains and rivers in Shaanxi Province (meteorological part)