13.220.99 有关消防的其他标准 标准查询与下载

BS EN 15882-3:2010 服务设施用耐火性试验结果的扩展应用 渗透密封剂

Extended applications of results from fire resistance tests for service installations. Penetration seals

ISO 16312-1:2010 火灾危险和风险评估用获取火灾气流毒性数据的物理防火模型的有效性评估指南.第1部分:标准

This part of ISO 16312 provides technical criteria and guidance for evaluating physical fire models (i.e. laboratory combustion devices and operating protocols) used in effluent toxicity studies for obtaining data on the effluent from products and materials under fire conditions relevant to life safety[2]. Relevant analytical methods, calculation methods, bioassay procedures and prediction of the toxic effects of fire effluents can be referenced in ISO 19701[3], ISO 19702[4], ISO 19703[5], ISO 19706[6], ISO 13344[7], and ISO 13571.

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment - Part 1: Criteria

GA 856.3-2009 合同制消防员制式服装.第3部分:春秋制服

GA 856的本部分规定了合同制消防员制式服装春秋制服的技术要求、性能要求、试验方法、检验规则、包装、运输及贮存。 本部分适用于合同制消防员制式服装春秋制服(以下简称春秋制服)的设计、生产及检验。

Station uniform for contract firefighters-Part 3:Spring-autumn uniform

GA 856.1-2009 合同制消防员制式服装.第1部分：命名与术语

GA 856的本部分规定了合同制消防员制式服装的命名与术语。 本部分适用于合同制消防员制式服装的命名与术语。

Station uniform for contract firefighters.Part 1:Nomenclature and terms

XF 856.3-2009 合同制消防员制式服装第3部分：春秋制服

Contract Firefighter Uniforms Part 3: Spring and Autumn Uniforms

XF 856.1-2009 合同制消防员制式服装第1部分：命名与术语

Contract firefighter uniforms Part 1: Nomenclature and terminology

XF 856.4-2009 合同制消防员制式服装第4部分：夏季制服

Contract Firefighter Uniforms Part 4: Summer Uniforms

XF 856.6-2009 合同制消防员制式服装第6部分：执勤帽

Contract Firefighter Uniform Part 6: Duty Hat

XF 856.2-2009 合同制消防员制式服装第2部分：服饰

Contract Firefighter Uniform Part 2: Clothing

XF 856.5-2009 合同制消防员制式服装第5部分：冬季制服

Contract Firefighter Standard Clothing Part 5: Winter Uniforms

GA 856.6-2009 合同制消防员制式服装 第6部分:执勤帽

GA 856的本部分规定了合同制消防员制式服装执勤帽的款式规格、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本部分适用于合同制消防员制式服装执勤帽的设计、生产及检验。

Station uniform for contract firefighters.Part 6:Duty hat

GA 856.5-2009 合同制消防员制式服装.第5部分:冬季制服

GA 856的本部分规定了合同制消防员制式服装冬季制服的技术要求、性能要求、试验方法、检验规则、包装、运输及贮存。 本部分适用于合同制消防员制式服装冬季制服(以下简称冬季制服)的设计、生产及检验。

Station uniform for contract firefighters-Part 5: Winter uniform

GA 856.4-2009 合同制消防员制式服装.第4部分:夏季制服

GA 856的本部分规定了合同制消防员制式服装夏季制服的技术要求、性能要求、试验方法、检验规则、包装、运输机贮存。 本部分适用于合同制消防员制式服装夏季制服(以下简称夏季制服)的设计、生产及检验。

Station uniform for contract firefighers-Part 4: Summer uniform

DIN EN 12101-10 Berichtigung 1:2009 烟和热控制系统 第10部分:电源 技术勘误DIN EN 12101-10-2006-01

Smoke and heat control systems - Part 10: Power supplies; German version EN 12101-10:2005, Corrigendum to DIN EN 12101-10:2006-01; German version EN 12101-10:2005/AC:2007

ISO 27368:2008 导致窒息有毒物的血液分析.一氧化碳和氰化氢

This International Standard details analytical methods suitable for analysing the two primary toxic combustion gases, carbon monoxide (CO) and hydrogen cyanide (HCN), in blood samples collected from fire casualties. In blood, CO is measured as carboxyhaemoglobin (COHb) and HCN as cyanide ion (CN-). Although numerous methods are reported in the literature for performing blood COHb and CN- analyses, the analytical methods included herein are based upon their suitability for performing the analysis on ante-mortem and post- mortem blood samples from fire casualties. The analytical principle, analysis time, repeatability, reproducibility, robustness, effectiveness and instruments used are considered for those methods. Some of the methods described herein might not be suitable for analysing putrid or clotted blood. Burned (solid) blood can be analysed after homogenization.

Analysis of blood for asphyxiant toxicants - Carbon monoxide and hydrogen cyanide

DIN V 18232-8:2008 烟和热控制设备.第8部分:通风和排烟用建筑覆盖物的开口装置

Smoke and heat control systems - Part 8: Opening units for building coverings for ventilation and smoke elimination purposes

DIN 18232-7:2008 烟和热控制系统.第7部分:可熔金属制备的排热通风设备.评估程序和安装

Smoke and heat control systems - Part 7: Heat exhaust ventilators made of meltable materials; Assessment procedure and installation

DIN 18232-2:2007 烟雾和热控制系统.第2部分:自然烟雾和排热通风机.设计、要求和安装

Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators; design, requirements and installation

BS ISO 13344:2004 火焰中致命毒性的评估

This International Standard provides a means for estimating the lethal toxic potency of the fire effluents produced from a material while exposed to the specific combustion conditions of a physical fire model. The lethal toxic potency values are specifically related to the fire model selected, the exposure scenario and the material evaluated. Lethal toxic potency values associated with 30-min exposures of rats are predicted using calculations which employ combustion atmosphere analytical data for carbon monoxide (CO), carbon dioxide (CO2), oxygen (O2) (vitiation) and, if present, hydrogen cyanide (HCN), hydrogen chloride (HCI), hydrogen bromide (HBr), hydrogen fluoride (HF), sulfur dioxide (SO2), nitrogen dioxide (NO2), acrolein and formaldehyde. If the fire effluent toxic potency cannot be attributed to the toxicants analysed, this is an indication that other toxicants or factors must be considered. This International Standard is applicable to the estimation of the lethal toxic potency of fire effluent atmospheres produced from materials, products or assemblies under controlled laboratory conditions and should not be used in isolation to describe or appraise the toxic hazard or risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire hazard assessment that takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use; see ISO/TS 19706. The intended use of fire safety-engineering calculations is for life-safety prediction for people and is most frequently for time intervals somewhat shorter than 30 min. This extrapolation across species and exposure intervals is outside the scope of this International Standard. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices.

Estimation of the lethal toxic potency of fire effluents

BS ISO 13344:2007 火焰中致命毒性的评估

Estimation of the lethal toxic potency of fire effluents