防护设备综合标准-分析测试百科网

T/SDHPXH 003-2021 建筑用立式安全防护网

1）标准名称：标准名称为“建筑用立式安全防护网”。 2）范围：本标准规定了建筑用立式安全防护网定义、技术要求、检验方法、检验规则及标识等要求。本标准适用于建筑施工作业场所，防止人员或物体侧向冲击，并具有阻燃功能的安全防护网，不适用于防止人员或物体垂直坠落的作业环境。 3）规范性引用文件：本标准中引用和参考了最新版的国内和国际、国外先进标准，以充分保证本标准条款的可依性和可行性。 4）术语和定义：本标准分为术语和定义两大类，统一按GB/T12903确立的以及术语和定义适用于本标准。 5）分类：本标准规定了分类方法及形式。 6）技术要求：本标准规定了技术要求。 7）实验方法：本标准规定了相关实验方法。 8）检验规则：本条款包括了型式检验和出厂检验。 9）标志、包装、运输、贮存：本标准对标志进行了规范，保证包装、运输与贮存中的防护。

Vertical safety net for building

ICS: 13.340.01
CCS: S952
发布: 2021-01-22
实施: 2021-01-23

T/ZZB 1871-2020 自动变光焊接滤光镜

本文件规定了自动变光焊接滤光镜（以下简称“滤光镜”）的术语与定义、结构、基本要求、技术要求、试验方法、检验规则、标识、包装、储运以及质量承诺。本文件适用于安装在焊接工防护面罩上的自动变光焊接滤光镜。

Automatic welding filter

ICS: 13.340.01
CCS: C342
发布: 2020-11-18
实施: 2020-11-29

ASTM F2302-20 耐高温或明火偶然暴露的防护服标签的标准性能规范

Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame

ICS: 13.340.01
CCS
发布: 2020-10-01
实施

ASTM F3426-20 用加热的人体模型测量服装制品的热绝缘性的标准试验方法

1.1 This test method covers the determination of the insulation value of clothing items that cover only the head (Option 1), a hand (Option 2), or a foot (Option 3). It describes the measurement of the resistance to dry heat transfer from a heated manikin form to a relatively calm, cool environment. 1.1.1 This is a static test that provides a baseline clothing measurement on a stationary head manikin form (Option 1), hand manikin form (Option 2), or foot manikin form (Option 3). 1.1.2 The effects of body form position, movement, and contact with other surfaces are not addressed in this test method. 1.2 The insulation values obtained apply only to the particular clothing item evaluated and for the specified environmental conditions of each test, particularly with respect to air movement. 1.3 The values stated in either clo or SI units are to be regarded separately as standard. Each system shall be used independently of the other. The thermal resistance units, clo or SI, shall be identified clearly and consistency of units shall be maintained throughout reporting process. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring the Thermal Insulation of Clothing Items Using Heated Manikin Body Forms

ICS: 13.340.01
CCS
发布: 2020-07-15
实施

ASTM E3110/E3110M-20 抗弹道躯干防弹衣和射击包弹道极限数据收集的标准试验方法

Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs

ICS: 13.340.01
CCS
发布: 2020-04-01
实施

ASTM E3192/E3192M-20 通过翻滚调节软装甲的标准实施规程

1.1 This practice applies only to the conditioning of soft body armor via temperature, humidity, and tumbling exposure prior to ballistic resistance testing. 1.2 This practice is intended for soft armor for law enforcement applications, and its purpose is to subject test items to conditions intended to provide some indication of the test item ability to withstand conditions of heat, moisture, and mechanical wear (folding and abrasion) that might be encountered during wear. 1.2.1 This practice is not intended for soft armor to be used in military applications. 1.3 In this practice, “other standards and specifications” and “unless specified elsewhere” refer to documents that require the use of this practice. Purchasers and other users are responsible for the “other standards and specifications” and for specifying any requirements that supersede those of this practice. 1.4 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Soft Armor Conditioning by Tumbling