13.340.50 防护鞋 标准查询与下载
共找到 495 条与 防护鞋 相关的标准，共 33 页
Personal protective equipment — Footwear protecting against risks in foundries and welding — Part 1: Requirements and test methods for protection against risks in foundries
- ICS
- 13.340.50
- CCS
- 发布
- 2019-12-11
- 实施
What is ISO 13287- Test method for slip resistance in PPE footwear about? ISO 13287 discusses personal protective equipment (PPE). ISO 13287 is an international standard on test methods for slip resistance in PPE footwear to ensure prevention against workplace hazards due to slipping ISO 13287 specifies a method of test for the slip resistance of PPE footwear. Footwear claiming ‘slip resistance’ would be deemed an item of personal protective equipment. Note1: For product development purposes, sole units, outsoles, or other soling components such as top pieces may be tested. Note2: ISO 13287 does not apply to special-purpose footwear containing spikes, metal studs, or similar. Who is ISO 13287 -Test method for slip resistance in PPE footwear for ? ISO 13287 on test method for slip resistance in PPE footwear is useful for: PPE footwear manufacturers PPE footwear developers or testers Health and safety departments Why should you use ISO 13287...
Personal protective equipment. Footwear. Test method for slip resistance
- ICS
- 13.340.50
- CCS
- 发布
- 2019-11-30
- 实施
- 2019-11-30
This document specifies a method of test for the slip resistance of PPE footwear. It is not applicable to special purpose footwear containing spikes, metal studs or similar. Footwear claiming ?slip resistance' would be deemed an item of personal protective equipment. NOTE For product development purposes, sole units, outsoles or other soling components such as top pieces may be tested.
Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2019)
- ICS
- 13.340.50
- CCS
- 发布
- 2019-10-23
- 实施
- 2020-01-31
This document specifies a method of test for the slip resistance of PPE footwear. It is not applicable to special purpose footwear containing spikes, metal studs or similar. Footwear claiming ‘slip resistance’ would be deemed an item of personal protective equipment. NOTE For product development purposes, sole units, outsoles or other soling components such as top pieces may be tested.
Personal protective equipment — Footwear — Test method for slip resistance
- ICS
- 13.340.50
- CCS
- 发布
- 2019-10-01
- 实施
What is ISO 22568‑2 about? ISO 22568 is an International Standard on foot and leg protectors that aims to help manufacturers with standardized methods to ensure optimal performance of the product. ISO 22568‑2 is the second part of the series that specifies requirements and test methods for non-metallic toecaps, intended to function as components of PPE footwear. Non-metallic toecaps complying with the requirements of are suitable components of personal protective equipment (PPE) footwear. ISO 22568 ‑ 2 defines two types of non-metallic toecaps (type A and type B) to cover the various types of footwear constructions. Note: External toecaps were used in the past, they are not used anymore, and they are not covered by the present document. Who is ISO 22568‑2 for? ISO 22568‑2 on non-metallic toecaps is applicable for:
Foot and leg protectors. Requirements and test methods for footwear component - Non-metallic toecaps
- ICS
- 13.340.50
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
What is ISO 22568‑3 about? ISO 22568 is an International Standard on foot and leg protectors that aims to help manufacturers with standardized methods to ensure optimal performance of the product. ISO 22568‑3 is the third part of the multi-series of documents that specifies requirements and test methods for the metallic perforation resistant inserts with resistance against mechanical perforation, intended to function as components of personal protective equipment (PPE) footwear. Note: When shaped inserts are tested in accordance with this document, their suitability to fit into footwear is not assured, because the dimensional conformity to the footwear depends on the individual shape of each model of footwear. Who is ISO 22568‑3 for? ISO 22568‑3 on metallic perforation resistant inserts is relevant to: Footwear manufacturers catering to specified inserts
Foot and leg protectors. Requirements and test methods for footwear components - Metallic perforation resistant inserts
- ICS
- 13.340.50
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
Foot and leg protectors — Requirements and test methods for footwear components — Part 4: Non-metallic perforation resistant inserts
- ICS
- 13.340.50
- CCS
- 发布
- 2019-03-22
- 实施
This document specifies requirements and test methods for non-metallic toecaps, intended to function as components of PPE footwear (e.g. as described by ISO 20345 and ISO 20346).
Foot and leg protectors — Requirements and test methods for footwear component — Part 2: Non-metallic toecaps
- ICS
- 13.340.50
- CCS
- 发布
- 2019-03-20
- 实施
This document specifies requirements and test methods for metallic toecaps, intended to function as components of PPE footwear (e.g. as described by ISO 20345 and ISO 20346).
Foot and leg protectors — Requirements and test methods for footwear components — Part 1: Metallic toecaps
- ICS
- 13.340.50
- CCS
- 发布
- 2019-03-20
- 实施
This document specifies requirements and test methods for the metallic perforation resistant inserts with resistance against mechanical perforation, intended to function as components of PPE footwear (e.g. as described by ISO 20345, ISO 20346 and ISO 20347).
Foot and leg protectors — Requirements and test methods for footwear components — Part 3: Metallic perforation resistant inserts
- ICS
- 13.340.50
- CCS
- 发布
- 2019-03-20
- 实施
1.1 This test method measures cut resistance of garments and devices worn to protect the lower body (legs) when operating a chainsaw.2 1.2 This test method may be used to test for compliance to minimum performance requirements in established safety standards. 1.3 The values stated in SI units are to be regarded as standard. NOTE 1—The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Measurement of Cut Resistance to Chainsaw in Leg-Protective Devices
- ICS
- 13.340.50
- CCS
- 发布
- 2019-02-01
- 实施
Standard Specification for Leg-Protective Devices for Chainsaw Users
- ICS
- 13.340.50
- CCS
- 发布
- 2019-02-01
- 实施
Rubber footwear－Lined industrial vulcanized- rubber boots－Specification
- ICS
- 13.340.50
- CCS
- 发布
- 20181114
- 实施
- 20181114
Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear
- ICS
- 13.340.50
- CCS
- 发布
- 2018-11-14
- 实施
Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear
- ICS
- 13.340.50
- CCS
- 发布
- 2018-11-14
- 实施
Protective clothing for users of hand-held chainsaws. Test methods for footwear
- ICS
- 13.340.50
- CCS
- C73
- 发布
- 2018-10-31
- 实施
- 2018-10-31
Footwear protecting against chemicals. Terminology and test methods
- ICS
- 13.340.50
- CCS
- C73
- 发布
- 2018-10-18
- 实施
- 2018-10-18
This document specifies test methods for assessing the resistance of footwear to cutting by hand-held chainsaws. This document is applicable only to footwear with integral protection. NOTE Methods for testing other forms of foot and leg protection (e.g. gaiters) against hand-held chainsaws are covered in other parts of the ISO 11393 series.
Protective clothing for users of hand-held chainsaws - Part 3: Test methods for footwear
- ICS
- 13.340.50
- CCS
- 发布
- 2018-09-00
- 实施
Standard Test Method for Measurement of Cut Resistance to Chainsaw in Leg-Protective Devices
- ICS
- 13.340.50
- CCS
- 发布
- 2018-08-15
- 实施
Standard Specification for Leg-Protective Devices for Chainsaw Users
- ICS
- 13.340.50
- CCS
- 发布
- 2018-08-15
- 实施
