13.340.50 防护鞋 标准查询与下载
共找到 493 条与 防护鞋 相关的标准，共 33 页
This European Standard applies to protective footwear for motorcycle riders for use while riding motorcycles for on or off road activities. It specifies the requirements for protection, ergonomic characteristics, innocuousness, mechanical properties, marking and information for users. It also describes the appropriate test methods.
Protective footwear for motorcycle riders - Requirements and test methods
- ICS
- 13.340.50
- CCS
- 发布
- 2011-02-24
- 实施
- 2011-02-24
Protective footwear for motorcycle riders. Requirements and test methods
- ICS
- 13.340.50
- CCS
- Y56
- 发布
- 2011-01-31
- 实施
- 2011-01-31
Occupational safety standards system. Feet personal protective means. Safety footwear. Technical requirements
- ICS
- 13.340.50
- CCS
- 发布
- 2011-01-01
- 实施
- 2012-07-01
This International Standard specifies methods for testing footwear designed as personal protective equipment.
Personal protective equipment - Test methods for footwear (ISO 20344:2011)
- ICS
- 13.340.50
- CCS
- 发布
- 2011
- 实施
Occupational safety standards system. Personal protective equipment. Safety footwear. Technical requirements
- ICS
- 13.340.50
- CCS
- 发布
- 2011
- 实施
- 2012-07-01
This International Standard specifies basic and additional (optional) requirements for safety footwear used forgeneral purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomicbehaviour.
Personal protective equipment - Safety footwear (ISO 20345:2011)
- ICS
- 13.340.50
- CCS
- 发布
- 2011
- 实施
Personal protective equipment. Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding. Requirements and test method
- ICS
- 13.340.50
- CCS
- C73
- 发布
- 2010-12-31
- 实施
- 2010-12-31
WARNING — This International Standard calls for the use of substances and/or procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. This International Standard specifies requirements and test methods for footwear protecting users against thermal risks and molten iron or aluminium metal splashes such as those encountered in foundries, welding and allied process. Footwear complying with this International Standard also offers other protection as defined in ISO 20345. NOTE Gaiters, over boot and clothing intended to provide protection to the feet and legs against molten metal are addressed by ISO 11611 and ISO 11612.
Personal protective equipment - Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding - Requirements and test method
- ICS
- 13.340.50
- CCS
- C73
- 发布
- 2010-12-01
- 实施
- 2010-12-01
This European Standard specifies requirements and test methods for toe caps and inserts with resistance against mechanical penetration, intended to function as components of PPE footwear (e.g.as described by EN ISO 20345, EN ISO 20346 and EN ISO 20347).
Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts; German version EN 12568:2010
- ICS
- 13.340.50
- CCS
- C73
- 发布
- 2010-10
- 实施
- 2010-10-01
Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts
- ICS
- 13.340.50
- CCS
- 发布
- 2010-09-30
- 实施
- 2010-09-30
This European Standard specifies requirements and test methods for toe caps and inserts with resistance against mechanical penetration, intended to function as components of PPE footwear (e.g. as described by EN ISO 20345, EN ISO 20346 and EN ISO 20347).
Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts
- ICS
- 13.340.50
- CCS
- 发布
- 2010-08-09
- 实施
- 2010-08-09
Foot and leg protectors - Requirements and test methods for toecaps and penetration-resistant inserts.
- ICS
- 13.340.50
- CCS
- C73
- 发布
- 2010-07-01
- 实施
- 2010-07-23
This European Standard specifies requirements and test methods for toe caps and inserts with resistance against mechanical penetration, intended to function as components of PPE footwear (e.g. as described by EN ISO 20345, EN ISO 20346 and EN ISO 20347).
Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts
- ICS
- 13.340.50
- CCS
- C45
- 发布
- 2010-06-30
- 实施
- 2010-06-30
Rubber footwear. Lined industrial vulcanized-rubber boots. Specification
- ICS
- 13.340.50
- CCS
- 发布
- 2010-05-31
- 实施
- 2010-05-31
Rubber footwear - Lined industrial vulcanized-rubber boots - Specification
- ICS
- 13.340.50
- CCS
- C73
- 发布
- 2010-05-31
- 实施
- 2010-05-31
Personal protective equipment - Knee protectors for work in the kneeling position
- ICS
- 13.340.50
- CCS
- 发布
- 2010-05-18
- 实施
- 2010-05-18
This European Standard specifies requirements and test methods for toe caps and inserts with resistance against mechanical penetration, intended to function as components of PPE footwear (e. g. as described by EN ISO 20345, EN ISO 20346 and EN ISO 20347).
Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts
- ICS
- 13.340.50
- CCS
- 发布
- 2010-05-01
- 实施
This Amendment modifies requirements, e. g. dimension and penetration resistance, in EN 14404
Personal protective equipment - Knee protectors for work in the kneeling position; German version EN 14404:2004+A1:2010
- ICS
- 13.340.50
- CCS
- C73
- 发布
- 2010-05
- 实施
- 2010-05-01
This document specifies the requirements for knee protectors for use in a kneeling position. Requirements for the marking of knee protectors and the information to be supplied by the manufacturer are given. Test methods are described and performance levels are defined. Where protection against additional hazards is claimed, performance requirements from other applicable standards may also be applied.This standard does not apply to knee protectors that are medical devices or are intended for sports.
Personal protective equipment - Knee protectors for work in the kneeling position
- ICS
- 13.340.50
- CCS
- 发布
- 2010-03-26
- 实施
- 2010-03-26
