17.100 力、重力和压力的测量 标准查询与下载

DIN 8129:2004 自动轨道衡.计量与技术要求、试验

This International Recommendation specifies the requirements and test methods for automatic rail-weigh-bridges, that are used to determine the mass of railway wagons when they are weighed in motion. It is intended to provide standardized requirements and test procedures to evaluate the metrological and technical characteristics of an instrument in a uniform and traceable way.#,,#

Automatic railweigh bridges - Metrological and technical requirements, tests (OIML R 106-1:1997)

DIN 8130:2004 不连续求和自动称重仪(求和定量秤).计量与技术要求、试验

Discontinuous totalizing automatic weighing instruments (totalizing hopper weighers) - Metrological and technical requirements, tests (OIML R 107-1:1997)

DIN 8132:2004 连续求和自动称重仪(皮带计量机).计量与技术要求、试验

Continuous totalizing automatic weighing instruments (Belt weighers) - Metrological and technical requirements, tests (OIML R 50-1:1997)

ASTM D7077-04 通过溶液和悬浮物的重量评价滴点尺寸的标准试验方法

1.1 This standard test method uses a simulated in-use study to measure the drop size by weight and to determine the number of drops per container for solutions and suspensions contained in a package system designed to deliver product drop-wise through a controlled size orifice by squeezing or compressing the package.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions

KS A 0521-2003 真空导热计的低压测定方法

이 규격은 기체 분자에 의한 열전도를 사용하는 진공계(이하 진공계라 한다.)를 사용하여

Measuring methods of low pressures by thermal conductivity gauge

QB/T 1076-2003 非自行指示轨道衡

本标准规定了非自行指示轨道衡的定义、计量要求、技术要求、测试方法、检验规则和标志、包装、运输、贮存。

Non-self-indicating railroad track scale

QB/T 1563-2003 衡器产品型号编制方法

本标准规定了衡器产品型号的编制方法。 本标准适用于除天平以外的所有衡器产品。木杆秤属限制使用的产品，也不在本标准的适用范围内。

Methods of classifying type of weighing instruments

GSO OIML R109:2002 带有柔性敏感元件的压力表和真空表（标准设备）

This standard applies to pressure gauges and vacuum gauges (standard instruments) with elastic sensing, elements. The application of this standard is limited to instruments in which the elastic deformation of the sensing element is mechanically transmitted to the indicating device using a pointer and a dial graduated in legal units of pressure, and in which the upper limit of the measuring range is between 0.06 MPa and 250 MPa for pressure gauges, and between -0.1 MPa and zero for vacuum gauges.

PRESSURE GAUGES AND VACUUM GAUGES WITH ELASTIC SENSING ELEMENTS (STANDARD INSTRUMENTS)

GSO OIML R101:2002 压力表、真空表、带有柔性敏感元件的图形和记录压力和真空表（普通装置）

This standard applies to pressure gauges, vacuum gauges and pressure–vacuum gauges (ordinary instruments) with elastic sensing elements, intended for the measurement of the pressure (i.e. gauge pressure, or vacuum, or both) of liquids, vapours and gases by direct indication using a dial and a pointer (indicating instruments) or by continuous recording as a function of time (recording instruments). The application of this standard is limited to instruments in which the elastic deformation of the sensing element is mechanically transmitted to the indicating or recording device graduated in legal pressure units, and in which the upper limit of the measuring range is between 0.05 MPa and 1000 MPa. Note: Recording instruments covered by this standard may be: – single or multi-channel recorders, – with a chart in the form of a disc, strip or sheet, – with one or several separate recording areas, – instruments in which the movement of the chart as a function of time is ensured by a clock-work mechanism or an electric motor or both

INDICATING AND RECORDING PRESSURE GAUGES, VACUUM GAUGES AND PRESSURE –VACUUM GAUGES WITH ELASTIC SENSING ELEMENTS (ORDINARY INSTRUMENTS)

GSO 1641:2002 大气压力测量装置的校准和测试方法

This recommendation specifies the metrological and technical requirements applicable to methods of calibration and test for atmospheric pressure, measures and to their initial and subsequent verification. It has relevance to the following types: a) Mercury barometers having a permanent reference vacuum. b) Barometers, for example aneroid barometers, with an elastic sensing element, a permanent reference vacuum and an indication, which may be either analogue, with a pointer and a dial, or digital.

Calibration and test procedures for barometers

GSO OIML R110:2002 压力秤

This standard applies to pressure balances equipped with either a simple-type or a re-entrant type piston-cylinder assembly, with direct loading, and which are used for measuring gauge pressure in the range from 0.1 MPa to 500 MPa. This standard specifies the metrological and technical requirements applicable to these instruments, the methods for their testing, and the format of the test report. It also applies to the adjustment of weights used with pressure balances and to the calibration of pressure balances in cases where high accuracy is required. The standard does not apply to pressure balances with hydraulic multipliers, indicator-type pressure balances, pressure balances with the piston loaded by means of a lever-arm, controlled-clearance pressure balances, and pressure balances with electromagnetic balancing. It also does not apply to instruments that measure absolute pressure.

Pressure balances

GSO 1636:2002 秤刀和轴承

This standard is concerned with knives and steps for commercial and precision balances.

Knives and Steps for Balances

KS A 0086-2002 增压脱气试验法

이 규격은 진공 장치의 설계에 앞서 선행되어야 할 각종 재료의 기체 방출량을 추정하는 시험

Outgas test method using increasing pressure

KS A 0086-2002(2017) 使用增加的压力脱气测试方法

Outgas test method using increasing pressure

ASTM E74-00a 力测量仪器校准的标准实践 用于验证试验机的力指示

Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

JIS B 7602:2002 测力传感器.试验方法

この規格は，一軸試験機の静的検証に使用される以外のロードセルの校正方法に関するもの，及びこれらの性能評価の方法について規定し，力を受けた部材の弾性変形量，又はこれに比例する物理量を測定することによって，質量又は力の大きさの確定を行うロードセルについて適用する。この規格で適用するロードセルとは，ロードセル単体(使用される組込部品を含む。)を指す。

Load cell -- Test method

LST EN 837-1+AC-2001 压力表 第1部分：波登管压力表 尺寸、计量、要求和测试

Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing

LST EN 837-3-2001 压力表 第3部分：隔膜和囊式压力表 尺寸、计量、要求和测试

Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing

LST EN 837-2-2001 压力表 第2部分：压力表的选择和安装建议

Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges

GOST 8.005-2002 ГСИ.连续作用皮带秤.检定方法

State system for ensuring the uniformity of measurements. Continuous conveyer balance. Methods and means of verification