17.100 力、重力和压力的测量 标准查询与下载

VDI/VDE 2624 Blatt 2.1-2008 机械量的测量 移动力测量系统的校准说明

The present guideline describes a calibration method for mobile force measuring systems. These force measuring systems consist of a sensor and a display unit. These can be jointly mounted in one housing or arranged separately. In both cases this guideline provides for the calibration item to be considered and calibrated as a complete measuring chain.

Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems

JIS B 7612-2:2008 称重仪器用测压元件.第2部分:数字测压元件

Load Cells for Weighing Instruments -- Part 2: Digital Load Cells

JIS B 7547:2008 数字压力计的表征和校准程序

This Standard specifies the procedures of characterization and calibration for digital pressure gauges for control use. However, it does not apply to the digital pressure gauges to be used for industrial measurement use. Those for control use are the reference standards (including practical standards) to be used for the calibration of pressure gauge.

Procedures of characterization and calibration for digital pressure gauges

JIS B 7611-3:2008 非自动称重仪器.度量衡学和技术要求及试验.第3部分:交易或鉴定用重量和砝码

Nonautomatic weighing instruments -- Metrological and technical requirements and tests -- Part 3: Weights and poises used in transaction or certification

JB/T 10892-2008 电子式六氟化硫密度变送器

本标准规定了电子式六氟化硫（SF)密度变送器（以下简称密度变送器）的分类与命名、基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于高压开关用保护气体六氟化硫的密度检测所采用的电子式密度变送器。

Electrical SF₆ gas dendity transmitters

DB34/ 788-2008 电子定量包装秤

本标准适用于称重传感器为一次转换元件并带有载荷承载器，电子装置，数字显示，在秤量过程中无需操作者干预，把散装物料分为预定的且实际上恒定质量的装料，并将装料装入容器封口或不封口的用于定量包装商品的电子定量包装秤（以下简称包装秤）。

Electronic Quantitative Packing Scale

GSO OIML R 65:2008 用于测试材料的单轴机器的力测量系统

This Recommendation gives the metrological and technical performance requirements and the inspection and testing procedures necessaryfor the metrological control of the force measuringsy stem of uniaxial material testing machinessubject to national laws and regulatiFor .onsm etrological requi ,controlrements for initial and subsequent verification only ty ,in general ,are covered sincepe evaluation is not considered to be practical for these measuring system .s

Force measuring system of uniaxial material testing machines

GSO OIML R134-1:2008 行驶中的道路车辆自动秤 车辆总重

This International Recommendation specifies the requirements and test methods for automatic instruments for weighing road vehicles in motion, hereinafter referred to as “instruments”, that are used to determine the total mass of road vehicles when the vehicles are weighed in motion. It provides standardized requirements and test procedures to evaluate the metrological and technical characteristics of an instrument in a uniform and traceable way.

Automatic instruments for weighing road vehicles in motion. Total Vehicle Weighing

JB/T 7482-2008 压电式压力传感器

本标准规定了压电式压力传感器（以下简称传感器）的型号命名、产品分类、技术要求、试验方法、检验规则以及标志、包装、运输、贮存等。 本标准适用于压电式压力传感器的制造、验收及使用。

Piezoelectric pressure sensors

JB/T 6805-2008 压力表接点装置.技术条件

本标准规定了压力表接点装置的产品分类、技术要求、试验方法、检验规则和标志、包装及储存。 本标准适用于与压力表配套并以压力信号控制电气信号通断的直接作用式和磁助式接点装置(以下简称装置)。 本标准不适用于光电式、感应式接点装置。

Technical conditions for contact devices of pressure gauges

JIS B 7609:2008 砝码

この規格は，質量測定の信頼性を確保するための標準として，又ははかりとともに用いる，質量の公称値が1 mg～5 000kgまでの分銅について，精度等級（E級，E級，F級，F級，M級，M級，M級，M）に分けて規定する。

Weights

JIS B 7505-1:2007 无液气压计.第1部分:弹簧管压力计

この規格は，アネロイド型圧力計(弾性素子の圧かこよる変形量を機械的に拡大して直接ゲージ圧を測定する指示圧力計)のうち，ブルドン管を弾性素子に用いた単針・同心の丸形指示圧力計(以下，ブルドン管圧力計という。)について規定する。

Aneroid pressure gauges -- Part 1: Bourdon tube pressure gauges

GSO OIML R111-1:2007 M3、M2-3、M2、M1-2、M1、F2、F1、E2、E 第 1 类重量 第1部分：计量和技术要求

1.1 This Recommendation contains technical (e.g. principal physical characteristics) and metrological requirements for weights used: • As standards for the verification of weighing instruments; • As standards for the verification or calibration of weights of a lower accuracy class; • With weighing instruments.

Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3 Part 1: Metrological and Technical requirements

DIN 8119-3:2007 台秤.第3部分:铁路称量台和铁路及道路结合称量台.称量台尺寸、承载能力≤120t

Platform scales - Part 3: Rail weighbridges, combined rail and road weighbridges - Platform sizes, capacity up to 120 t

DIN 8119-6:2007 台秤.第6部分:铁路称量台和铁路及道路结合称量台的设计载荷

Platform scales - Part 6: Design loads for rail weighbridges and combined rail and road weighbridges

DIN 8119-1:2007 台秤.第1部分:称量台尺寸、承载能力＜20t

Platform scales - Part 1: Platform sizes, capacity up to 20 t

DIN 8119-2:2007 台秤.第2部分:道路称量台.称量台尺寸、承载能力＜60t

Platform scales - Part 2: Road weighbridges - Platform sizes, capacity up to 60 t

DIN 8119-4:2007 台秤.第4部分:落地天平和自重天平的设计荷载

Platform scales - Part 4: Design loads for floor-mounted and dormant scales

KS M 7049-2007 纸张基重的测定

Determination of basis weight of paper

JB/T 7487.2-2007 金属膜盒.第2部分:金属压力膜盒

JB/T 7487的本部分规定了金属压力膜盒的产品分类、技术要求、试验方法、检验规则和标志、包装、运输及贮存。 本部分适用于仪器仪表用的位移与压力呈线性的金属压力膜盒。单膜片膜盒亦可参照执行。

Metal capsule.Part 2: Metal pressure capsule