17.120.01 流体流量的测量综合 标准查询与下载

ANSI/ASME MFC-11M-2006 用科氏流量计测量流体的流量

This Standard (ASME MFC-11M) establishes common terminology, gives guidelines for the selection, installation, calibration, and operation of Coriolis flowmeters for the determination of mass flow, density, volume flow and other parameters. The content of this Standard is applied to the flow measurement of liquids, gases, mixtures of gases, multiphase flows, and miscible and immiscible mixtures of liquids.

Measurement of Fluid Flow by Means of Coriolis Flowmeters

NF C97-912*NF EN 61685:2006 超声波.流量计量系统.流量试验目标

Ultrasonics - Flow measurement systems - Flow test object.

KS B ISO TR 7066-1-2004(2014) 流量测量装置校准和使用的不确定度评定第1部分:线性校准关系

Assessment of uncertainty in calibration and use of flow measurement devices－Part 1：Linear calibration relationships

KS B ISO TR 7066-1:2004 流量测量设备的使用和校正的不确定性评定.第1部分:线性校验关系

이 규격에는 관로 또는 개수로에서 유량을 측정하는 방법에서 교정 곡선을 얻는 데 사용되

Assessment of uncertainty in calibration and use of flow measurement devices-Part 1:Linear calibration relationships

DIN 19211:2004 用压差装置测量流体流量.冷凝室

Measurement of fluid flow by means of pressure differential devices - Condensation chambers

DIN 19207:2004 用压差装置测量流体流量.螺纹管端和附件

The document specifies connection size, ranges of application and materials for threaded pipe ends.#,,#

Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories

DIN EN 61685:2003 超声学.流量测量系统.流量试验目标

The purpose of this International Standard is to establish a flow Doppler test object for the acceptance testing, quality assurance testing and clinical calibration of Doppler systems, working at a frequency between 2 MHz and 10 MHz. As the response of Doppler systems depends on the signal level and on the spectral contents of the signal, it is desirable to test some aspects of a Doppler system with a test object that mimics the in vivo situation. This flow test object is not intended as a phantom mimicking clinical conditions.#,,#

Ultrasonics - Flow measurement systems - Flow test object (IEC 61685:2001); German Version EN 61685:2001

ANSI/ASME MFC-14M-2003 小孔精密孔板仪测量流体的流量

Specifices the geometry and method of use for orifice meters of 6 mm to 40 mm line size when they are inserted in a conduit running full. It also gives necessary information for calculating flow rate and its associated uncertainty.

Measurement of Fluid Flow Using Small Bore Precision Orifice Meters

LST ISO 7066-2:2002 流量测量装置校准和使用中不确定性的评估 第2部分：非线性校准关系（idt ISO 7066-2:1988）

Assessment of uncertainty in calibration and use of flow measurement devices. Part 2: Non-linear calibration relationships (idt ISO 7066-2:1988)

ASME MFC-18M-2001 用可变面积测定仪测量流体流量

This Standard describes the common variable area flowmeter. This Standard does not attempt to standardize dimensions because the commercial products differ too widely. The variable area meter is manufactured in a variety of designs. This Standard addresses only those meters based on a vertical tapered tube of round or a modified round cross section. Specifically not addressed are the various vane type meters, eters with horizontal flow, or meters which use a spring deflection to oppose flow forces.

Measurement of Fluid Flow Using Variable Area Meters

CJ/T 122-2000 超声多普勒流量计

Ultrasonic Doppler flowmeter

ANSI/ASME MFC-10M-2000 确定流量计安装效果的方法

This Standard establishes methods for determining the influence of installation conditions or flow patterns on the performance of flowmeters in closed conduits (i.e., pipe, ducts, etc.). This Standard also addresses: (a) means and terminology for defining a reference condition for flow calibration of a particular flowmeter; and (b) guidelines for extrapolation and interpolation of installation effects to untested piping conditions. This Standard does not supersede or otherwise replace qualification tests or installation tests that are specified by other standards such as ISO 9951.

Method for Establishing Installation Effects on Flowmeters

GOST R 51657.2-2000 水利土壤改良与水利经济系统水流量的测量.水流量的测量方法.分类

Настоящий стандарт устанавливает применяемые на пунктах водоучета в гидромелиоративных и водохозяйственных системах методы измерения р

Water flow measurement in hydromelioration and water economics systems. Methods of water flow measurement. Classification

GOST R 51657.3-2000 水利土壤改良与水利经济系统水流量的测量.流量测量机构.分类

Настоящий стандарт устанавливает применяемые на пунктах водоучета, расположенных на гидромелиоративных и водохозяйственных системах, т

Water flow measurement in hydromelioration and water economics system. Flow gauging structures. Classification

ASTM B855-94(1999)e1 用阿诺德计和霍尔漏斗测定金属粉末体积流量的标准试验方法

Standard Test Method for Volumetric Flow Rate of Metal Powders Using Arnold Meter and Hall Funnel

CNS 13979-1999 涡流流量计

Vortex flow meters

BS ISO 11631:1999 流体流量测量.流量计性能的规定方法

Specifies methods of describing the performance of any flowmeter and indicates how flowmeters may be classified according to their traceability groups.

Measurement of fluid flow - Methods of specifying flowmeter performance

ISO 11631:1998 流体流量的测量 流量计性能的表示方法

本标准适用于流量计制造商发行的技术规范和说明书。 本标准规定了用于封闭管道或明渠的各种流量计的性能表述方法。 本标准说明了如何根据流量计的溯源性等级对流量计进行分类，并且详细阐明了制造商应如何表 述流量计的溯源性、质量保证和使用条件，但流量计应用于其他情况时仍可能需要做进一步的说明。 注：第3章确立的术语和定义中包括了大量相关专业术语，以促进这些术语在技术规范中的普遍应用。

Measurement of fluid flow - Methods of specifying flowmeter performance

DL/T 5084-1998 电力工程水文技术规程

Technical code of hydrology for electrical power projects

CJ/T 3063-1997 给排水用超声流量计(传播速度差法)

Ultrasonic flowmeter for potable water and drain water (Transmission speed difference method)