17.120.20 明渠中流量的测量 标准查询与下载

KS B ISO 1088:2021 液体比重计.使用流速计的速度面积法.流量测量不确定度测定用数据的收集和处理

Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement

KS B ISO 8368:2021 水文测定.使用构筑物的明渠流量测量.构筑物选择指南

Hydrometric determinations — Flow measurements in open channels using structures — Guidelines for selection of structure

KS B ISO 748-2021 液体比重计.用流量计或浮子测量明渠中的液体流量

Hydrometry — Measurement of liquid flow in open channels using current-meters or floats

KS B ISO 3846:2021 水文测验.使用矩形宽顶堰的明渠流量测量

Hydrometry — Open channel flow measurement using rectangular broad-crested weir

KS B ISO 3846-2021 水文测验.使用矩形宽顶堰的明渠流量测量

Hydrometry — Open channel flow measurement using rectangular broad-crested weir

KS B ISO TR 11651-2021 利用一维模拟模型估算水库泥沙淤积

Estimation of sediment deposition in reservoir using one dimensional simulation models

KS B ISO 11329:2021 水文测定.潮汐水道中悬浮泥沙输移的测量

Hydrometric determinations — Measurement of suspended sediment transport in tidal channels

KS B ISO 13550:2021 水文测定.使用构筑物的明渠流量测量.垂直底流闸门的使用

Hydrometric determinations — Flow measurements in open channels using structures — Use of vertical underflow gates

KS B ISO 6420:2021 水文测量.水文测量船的定位设备

Hydrometry — Position fixing equipment for hydrometric boats

KS B ISO 6420-2021 水文测量.水文测量船的定位设备

Hydrometry — Position fixing equipment for hydrometric boats

KS B ISO 2425-2021 水文测验.潮汐条件下明渠液体流量的测量

Hydrometry — Measurement of liquid flow in open channels under tidal conditions

KS B ISO 2425:2021 水文测验.潮汐条件下明渠液体流量的测量

Hydrometry — Measurement of liquid flow in open channels under tidal conditions

KS B ISO 1088-2021 液体比重计.使用流速计的速度面积法.流量测量不确定度测定用数据的收集和处理

Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement

KS B ISO 6416-2021 液体比重计.用超声波传输时间（飞行时间）法测量流量

Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method

KS B ISO 8368-2021 水文测定.使用构筑物的明渠流量测量.构筑物选择指南

Hydrometric determinations — Flow measurements in open channels using structures — Guidelines for selection of structure

KS B ISO 748:2021 液体比重计.用流量计或浮子测量明渠中的液体流量

Hydrometry — Measurement of liquid flow in open channels using current-meters or floats

ISO 748:2021 液体比重计.明渠液体流量的测量.使用点速度测量的速度面积法

This document specifies methods for determining the velocity and cross-sectional area of water flowing in open channels and for calculating the discharge employing point velocity measurement devices. It is applicable to methods using rotating-element current meters, acoustic doppler velocimeters (ADVs), acoustic doppler current profiler (ADCP) stationary method, surface velocity measurement including floats and other surface velocity systems. Although some general procedures are discussed, this document does not describe in detail how to use or deploy these systems. NOTE For detailed procedures, refer to guidelines from instrument manufacturers and the appropriate public agencies.

Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements

ASTM D5390-21 用Palmer-Bowlus水槽测量明渠水流的标准试验方法

1.1 This test method covers measurement of the volumetric flow rate of water and wastewater in sewers and other open channels with Palmer-Bowlus flumes. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes

BS ISO 3716:2021 水文测量 悬浮泥沙采样器的功能要求和特点

Hydrometry. Functional requirements and characteristics of suspended-sediment samplers

ISO 3716:2021 液体比重测定法. 悬浮-沉淀取样器的功能要求和特点

This document specifies the functional requirements and characteristics of the different types of suspended-sediment samplers used for collecting water-sediment mixtures from streams, rivers, lakes and reservoirs. This document does not include equipment for collecting samples in closed conduits and wastewater discharges. NOTE The units of measurement used in this document are SI units.

Hydrometry - Functional requirements and characteristics of suspended-sediment samplers