17.140.20 机器和设备的噪声 标准查询与下载

DS/EN ISO 10052:2021 声学 空气和冲击隔音以及服务设备声音的现场测量 调查方法（ISO 10052:2021）

Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method (ISO 10052:2021)

DS/ISO 10052:2021 声学 空气传播和冲击隔声以及服务设备声音的现场测量 调查方法

Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method

NF S31-077*NF EN ISO 10052:2021 声学. 空气声和冲击声隔绝及辅助设备声音的现场测量. 测量法

Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method

PN-EN IEC 60704-2-1-2021-07 E 家用和类似用途电器 测定空气声学噪声的测试规范 第 2-1 部分：干式真空吸尘器的特殊要求（IEC 60704-2-1:2020）

Household and similar electrical appliances -Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners (IEC 60704-2-1:2020)

PN-EN IEC 60704-2-17-2021-07 E 家用和类似用途电器 空气噪声测定的测试规范 第 2-17 部分：干洗机器人的特殊要求（IEC 60704-2-17:2020）

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17: Particular requirements for dry-cleaning robots (IEC 60704-2-17:2020)

PN-EN ISO 9902-6-2021-07 E 纺织机械-噪声测试规范-第6部分：织物制造机械（ISO 9902-6:2018）

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2018)

OEAL Richtlinie 111-2021 施工期间的噪音 降噪措施

Noise during construction work - Noise reduction measures

GSO ISO 27327-2:2021 风扇 风幕机 第2部分：声功率实验室测试方法

ISO 27327-2:2014 deals with the determination of the acoustic performance of air curtain units. In addition, it can be used to determine the acoustic performance of air curtain units combined with an ancillary device.

Fans — Air curtain units — Part 2: Laboratory methods of testing for sound power

GSO ISO 18564:2021 林业机械噪声测试规范

ISO 18564:2016 specifies all the information necessary for carrying out efficiently and under standardised conditions the noise emission values of self-propelled forestry machinery. It is applicable to fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors, harvesters, mulchers and multi-function versions of these machine types, as defined in ISO 6814. Noise emission characteristics include A-weighted emission sound pressure values at the operator's station and the A-weighted sound power value. The determination of these quantities is necessary for the following: - manufacturers to declare the noise emitted; - comparing the noise emitted by machines in the family concerned; - purposes of noise control at the source at the design stage. NOTE For low-noise design, noise emission values in frequency bands are useful and the basic International Standards ISO 3744 and ISO 11201 can be used for determining noise emission quantities in frequency bands.

Machinery for forestry — Noise test code

SN EN ISO 11202/A1:2021 声学 机械和设备发出的噪声 应用近似环境校正确定工作站和其他指定位置的排放声压级（ISO 11202:2010/Amd 1:2020）；修正案 A1

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010/Amd 1:2020); Amendment A1

DIN ISO 10494:2021 涡轮机和涡轮机组 空气传播噪声的测量 工程/调查方法（ISO 10494:2018）

Control of noise from machines or equipment requires effective exchange of acoustical information among the several parties concerned. This acoustical information is obtained from measurements. These measurements are useful only if they are carried out under specified conditions

Turbines and turbine sets - Measurement of emitted airborne noise - Engineering/survey method (ISO 10494:2018)

ISO 10052:2021 声学.空气声和冲击声隔绝及辅助设备声音的现场测量.测量法

This document specifies field survey methods for measuring a) airborne sound insulation between rooms, c) airborne sound insulation of façades, and b) impact sound insulation of floors, d) sound pressure levels in rooms caused by service equipment. The methods described in this document are applicable for measurements in rooms of dwellings or in rooms of comparable size with a maximum of 150 m3. For airborne sound insulation, impact sound insulation and façade sound insulation the method gives values which are (octave band) frequency dependent. They can be converted into a single number characterising the acoustical performances by application of ISO 717-1 and ISO 717-2. For heavy/soft impact sound insulation, the results also are given as A-weighted maximum impact sound pressure level. For service equipment sound the results are given directly in A - or C -weighted sound pressure levels.

Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method

EN ISO 10052:2021 声学.空气声和冲击声隔绝以及服务设备声音的现场测量.测量方法

Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021)

BS EN ISO 11202:2010+A1:2021 声学 机械和设备发出的噪音 应用近似环境校正确定工作站和其他指定位置的发射声压级

1   Scope 1.1   General This International Standard specifies a method for determining the emission sound pressure levels of machinery or equipment, at a work station and at other specified positions nearby, in situ . A work station is occupied by an operator and may be located in open space, in the room where the source under test operates, in a cab fixed to the source under test, or in an enclosure remote from the source under test. One or more specified positions may be located in the vicinity of a work station , or in the vicinity of an attended or unattended machine. Such positions are sometimes referred to as bystander positions. Emission sound pressure levels are determined as A-weighted levels. Additionally, levels in frequency bands and C-weighted peak emission sound pressure levels can be determined in accordance with this International Standard, if required. NOTE 1 The contents of the series ISO 11200 [15] to ISO 11205 [19] are summarized in ISO 11200 [15] . Methods are given for determining a local environmental correction (subject to a specified limiting maximum value) to be applied to the measured sound pressure levels in order to eliminate the influence of reflecting surfaces other than the plane on which the source under test is placed. This correction is based on the e...

Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections

T/CEC 485-2021 塔架式电力电容器装置噪声计算导则

本文件提供了塔架式电力电容器装置噪声计算方法的导则。 本文件适用于塔架式电力电容器装置的噪声计算。

Guidelines for Noise Calculation of Tower Type Power Capacitor Installation

OENORM EN 12102-1-2021 空调、液体冷却包、热泵、过程冷却器和带电动压缩机的除湿机-声功率级的测定-第1部分：空调、液体冷却包、空间加热用热泵和

Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and

DS/EN ISO 11202:2021 声学“机器和设备发出的噪声”“应用近似环境修正确定工作站和其他指定位置的发射声压级”“修正案 1（ISO 11202:2010/Amd 1:2020）

Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections – Amendment 1 (ISO 11202:2010/Amd 1:2020)

UNI EN ISO 9902-6:2021 纺织机械噪声试验规范第6部分：织物制造机械

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery

prEN 12102-1-2021 空调、液体冷却包、热泵、过程冷却器和带电动压缩机的除湿机-声功率级的测定-第1部分：空调、液体冷却包、空间加热用热泵和

Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and

EN ISO 11202:2010/A1:2021 声学.机械及设备噪声.工作位置和其它指定位置发射声压级测量.现场测量法 包含修改件A1,2021

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)