共找到 1127 条与 振动、冲击和振动测量 相关的标准,共 76 页
本标准规定了振动与冲击传感器磁灵敏度测试所用的仪器装置和测试方法。 本标准适用于振动与冲击传感器。
Methods for the calibration of vibration and shock pick-ups.Testing of magnetic field sensitivity
本标准规定了振动与冲击传感器二次振动校准的基本要求、所使用的仪器设备及操作方法。 本标准适用于直线运动型工作传感器,其适用范围如下: 频率范围:20~5000Hz。 动态范围(视振动频率而定): 位移:0.1μm~10mm; 速度:1mm/s~10m/s; 加速度:10~1000m/s。 误差限: 对于位移和速度传感器:(20~1000Hz)为读数的±4%; 对于加速度传感器:(20~1000Hz)为读数的士2%, (20~2000Hz)为读数的±3%, (20~5000Hz)为读数的±5%。
Methods for the calibration of vibration and shock pick-ups. Comparison (secondary vibration) calibration by sinusoidal excitation
本标准规定了采用激光干涉法测量振幅校准加速度计时所用的校准设备、方法及数据处理。 本标准主要适用于压电加速度计,频率范围:20~5000Hz,动态范围:10~1000m/s。
Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by laser interferometry
本标准规定了内燃机轴系的扭转振动测量仪器(以下简称扭振仪)的分类、技术要求以及包装、标志、运输和贮存等。 本标准适用于测量内燃机轴系扭转振动的角振幅和频率等物理量的仪器。测量其他类型轴系扭转振动的仪器亦可参照使用。
Technical requirements for torsional vibration measuring instruments
本标准规定了机械振动、机械冲击、动态量测试技术和数据处理的基本术语以及有关的辅助术语。 本标准适用于一切与机械振动、机械冲击有关的领域。
Mechanical vibration and shock-Terminology
Method of measurement and evaluation of mechanical vibration for reciprocating machines
本标准规定了手传振动测量仪器的要求、测量的方向和参量以及取值方法。 本标准适用于生产中人体手臂接触的手持振动工具或受振工件的振动测量。
Specification for measuring hand-transmitted vibration
本标准适用于振动、冲击试验数据分析,但不包括随机冲击序列的处理。
Vibration and shock-methods for analysis and presentation of data
本标准规定了测量凿岩机械与气动工具回转式机器的传感器的安装、机器的运转条件和测量。 本标准适用于凿岩机械与气动工具中的回转式机器,不包括回转冲击式机器.
Measurement of vibrations in rock drilling machines and pneumatic tools--Measurement for rotation machines
本标准规定了测量凿岩机械与气动工具中冲击式机器的传感器和机械滤波器的安装、机器的运转条件和测量。 本标准适用于凿岩机械与气动工具中的冲击式机器,如气镐、气铲、气动铆钉机、气动捣固机等,不包括带回转的冲击式机器。
Measurement of vibrations in rock drilling machines and pneumatic tools--Measurement for percussive machines
本标准规定了测量凿岩机械与气动工具振动的量、使用仪器、测量方向和位置及测量条件。 本标准适用于凿岩机械与气动工具在其握持手柄或其它握持部位上的振动测量。
Measurement of vibrations in rock drilling machines and pneumatic tools--General
本标准限用于弹性装置。弹性装置是用在设备和支承结构之间,旨在减少振动或冲击从该设备向支承结构或从支承结构向该设备的传递的弹性元件或系统。 本标准规定了隔离器生产厂和用户应该互相提供的技术资料。
Vibration and shock-Isolators-Procedure for specifying characteristics
本标准适用于手扶拖拉机扶手把及座位振动的测量,为评价手扶拖拉机的振动特性和振动对人体的作用提供依据。
Method of measurement for walking tractor vibration
本标准适用于立式平衡机性能的测定和校验。
Method of verification for vertical balancing machines
本标准适用于: 电动振动发生器(见3~7章及附录); 功率放大器(见3、4、5、6和8章及附录); 振动发生器和配用功率放大器(见3~9章及附录)。
Electrodynamic test equipment for generating vibration--Methods of describing equipment characteristics
本标准适用于标准轨距铁道干线电力机车的车内设备机械振动烈度的评定
Evaluation of mechanical vibration severity of machines and equipments in electric locomotives
本标准规定了中小功率柴油机台架试验时的整机振动测量方法。
Measurement method of vibration for small and medium power diesel engines
本试验方法用于测定各种材料在振动空化侵蚀下的质量损失积累过程曲线和空蚀率,评定各种材料在规定条件下的相对耐空蚀性能。本方法也可用于空蚀机理和影响因素方面的研究。
The method of vibration cavitation erosion test
本标准规定了工业自动化仪表(以下简称仪表)在使用中经受振动的试验方法。仪表应按本标准规定的方法进行振动试验,振动试验的等级可从振动试验参数表中选取。 本标准不适用安装在运动对象上的仪表。
Methods of vibration(sinusoidal) test for use in industrial process measurement and control instrument
ISO 7626-2:2015 specifies procedures for measuring linear mechanical mobility and other frequency-response functions of structures, such as buildings, machines and vehicles, using a single-point translational vibration exciter attached to the structure under test for the duration of the measurement. It is applicable to measurements of mobility, accelerance, or dynamic compliance, either as a driving-point measurement or as a transfer measurement. It also applies to the determination of the arithmetic reciprocals of those ratios, such as free effective mass. Although excitation is applied at a single point, there is no limit on the number of points at which simultaneous measurements of the motion response may be made. Multiple-response measurements are required, for example, for modal analyses.
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号