共找到 41 条与 热力学综合 相关的标准,共 3 页
Heat meters for water heat supply systems. General specifications
本标准适用于工作介质为水、温度范围为(2~90)℃热量表检测的热量表检定装置。
Heat meter verification device
Engineering technical specification for single well circulation heat exchange ground energy collection well
This procedure measures the resistance to radiant heat flow of insulating materials in sleeve form. The sleeve's effectiveness (S\dE) is determined by measuring the difference in surface temperature of a flat black, single- diameter ceramic cylinder with and without the standard diameter sleeve at the specified temperature, position, and distance from the radiant heat source.
Thermal Effectiveness of Sleeve Insulation (Stabilized Type)
This SAE Standard measures the percent thermal efficiency of materials in sleeve form used to contain heat or insulate around a hot component. The percent thermal efficiency (%TE) is determined by measuring the power difference expended by the heat source (cartridge heater) with and without the test sleeve at the specified temperature. See SAE J2302 to measure radiant heat flow of sleeves.
Thermal Containment Efficiency of Sleeve Materials (Stabilized Type)
This procedure measures the resistance to radiant heat flow of insulating materials in sleeve form. The sleeve's effectiveness (S\dE) is determined by measuring the difference in surface temperature of a flat black, single- diameter ceramic cylinder with and without the standard diameter sleeve at the specified temperature, position, and distance from the radiant heat source.
Thermal Effectiveness of Sleeve Insulation
This SAE Standard measures the percent thermal efficiency of materials in sleeve form used to contain heat or insulate around a hot component. The percent thermal efficiency (%TE) is determined by measuring the power difference expended by the heat source (cartridge heater) with and without the test sleeve at the specified temperature. See SAE J2302 to measure radiant heat flow of sleeves.
Thermal Containment Efficiency of Sleeve Materials
This proposed revision of Standard 105 provides a method of energy-performance comparison that can be used for any building, proposed or existing, and allows comparison of different methods of energy analysis. Historically Standard 105 has provided only limited ability to express or compare building energy performance. This revision expands the scope, providing a common basis for reporting building energy use, expressing energy performance, and comparing energy performance.
Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
Temperature measurement-General requirement
The aim of the guideline will therefore be to reproduce as accurately as possible the thermodynamic behaviour of the process gases within the entire region of interest when taking into consideration the technological developments to be expected; to demonstrate the influences of dissociation, of real-gas behaviour and of condensation which limit the accuracy of the simple models, and, where necessary, to include such influences; to optimize the formulation of the equations with regard to accuracy and calculating speed; by means of comparisons to demonstrate the shortcomings of popular physical property models so as to make users aware of the necessity for a common database of sufficient accuracy. Purpose of the guideline is not the estimation of the composition of gas mixtures.
Thermodynamic properties of humid air and combustion gases
Technical requirements & test method for the safety of calorimeter bombs
This SAE Standard measures the percent thermal efficiency of materials in sleeve form used to contain heat or insulate around a hot component. The percent thermal efficiency (%TE) is determined by measuring the power difference expended by the heat source (cartridge heater) with and without the test sleeve at the specified temperature. See SAE J2302 to measure radiant heat flow of sleeves.
Thermal Containment Efficiency of Sleeve Materials
This procedure measures the resistance to radiant heat flow of insulating materials in sleeve form. The sleeves effectiveness (S\dE) is determined by measuring the difference in surface temperature of a flat black, single- diameter ceramic cylinder with and without the standard diameter sleeve at the specified temperature, position, and distance from the radiant heat source
Thermal Effectiveness of Sleeve Insulation
General principles of effective energy evaluation method
General principles of effective energy evaluation method
本标准规定水硬性水泥之密度试验方法。注 1:水硬性水泥密度定义为固体单位体积之质量。 2:本试验法结果可用于作为设计及控制混凝土配比之参考。
Method of Test for Density of Hydraulic Cement
本标准规定有关陶瓷器、耐火物等烧成用隧道窑中,使用液体燃料或气燃料时之热平衡计算方法。附注 1. 除上述之适用范围外,碳制品,研磨材料及其它陶业制品亦可适用于本标准。2. 本标准中{ } 内之单位及数值系为国际制单位(SI),并记以供参考。
Method for Calculating Heat Balancing of Pottery and Refractory Firing Tunnel Kiln
本标准规定有关制造卜特兰水泥熟料之窑炉(旋窑及其附属设备)之热平衡计算方法。附注:本标准中{ } 内之单位及数值系为国际单位 SI 制,并记以供参考。
Method for Calculating Heat Balancing of Cement Rotary Kiln
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号