17.200.20 温度测量仪器仪表 标准查询与下载

GB/T 11158-1989 高温试验箱技术条件

本标准规定了高温试验箱（以下简称“试验箱”）的使用条件、技术要求、试验方法、检验规则及标志、包装、运输、贮存等要求。 本标准适用于对电工、电子及其他产品、零部件及材料进行高温试验的试验箱。

Specification for high temperature test chambers

GB/T 11159-1989 低气压试验箱技术条件

本标准规定了低气压试验箱（以下简称“试验箱”）的使用条件、技术要求、试验方法、检验规则及标志、包装、运输、贮存等要求。 本标准适用于对电工电子及其他产品、零部件及材料进行低气压试验的试验箱。

Specification for low air pressure test chambers

GB/T 8747-1988 气象用玻璃液体温度表

Meteorological liquid-in-glass thermometer

GB/T 514-1983 石油产品试验用液体温度计 技术条件

本标准适用于试验石油产品时测定温度用的玻璃液体温度计。

Liquid in glass thermometers for petroleum products--Specification

ASTM E2820-13(2024) 评定贱金属热电偶连接器的热EMF特性的标准试验方法

Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors

ASTM F2362-03(2024) 温度监测设备标准规范

Standard Specification for Temperature Monitoring Equipment

GSO IEC 62828-5:2024 工业和过程测量变送器测试的参考条件和程序 第5部分：流量变送器的具体程序

IEC 62828-5:2020 establishes specific procedures for testing flow transmitters used in measuring and control systems for industrial process and for machinery control systems. For general test procedures, reference is to be made to IEC 62828-1:2017, applicable to all types of industrial and process measurement transmitters. This document – together with IEC 62828-1:2017 – is the reference standard for testing every type of flow transmitter, not only for liquids but also for gases and for steam. In this document, "industrial flow transmitters" consistently covers all types of flow transmitters used in measuring and control systems for industrial process and for machinery.

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters

GSO IEC 62828-4:2024 工业和过程测量变送器测试的参考条件和程序 第4部分：液位变送器的具体程序

IEC 62828-4:2020 establishes specific procedures for testing level transmitters used in measuring and control systems for industrial process and machinery control systems. For general test procedures, reference is to be made to IEC 62828-1:2017, applicable to all types of transmitters. Throughout this document, the term "industrial transmitters" covers all types of transmitters used in measuring and control systems for industrial processes and for machinery. The requirements of this document are applicable to all level measurement principles. Detailed description of transmitters is given for two main principles for improved clarity.

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters

GSO ASTM E2847:2024 宽带红外温度计校准和精度验证的标准测试方法

1.1 This test method covers electronic instruments intended for measurement of temperature by detecting the intensity of thermal radiation exchanged between the subject of measurement and the sensor. 1.2 The devices covered by this test method are referred to as infrared thermometers in this document. 1.3 The infrared thermometers covered in this test method are instruments that are intended to measure temperatures below 1000°C, measure thermal radiation over a wide bandwidth in the infrared region, and are direct-reading in temperature. 1.4 This test method covers best practice in calibrating infrared thermometers. It addresses concerns that will help the user perform more accurate calibrations. It also provides a structure for calculation of uncertainties and reporting of calibration results to include uncertainty. 1.5 Details on the design and construction of infrared thermometers are not covered in this test method. 1.6 This test method does not cover infrared thermometry above 1000°C. It does not address the use of narrowband infrared thermometers or infrared thermometers that do not indicate temperature directly. 1.7 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers

T/QGCML 2930-2024 基于5G窄带物联网超声波热能表

本文件规定了基于5G窄带物联网超声波热能表的术语定义、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于基于5G窄带物联网超声波热能表的设计、生产和检验。

Ultrasonic heat energy meter based on 5G narrowband Internet of Things

T/SXICS 003-2023 工作用数字温度计校准规范

1 范围 2 规范性引用文件 3 概述 4 一般要求 5 计量特性 6 校准条件 6.1 环境条件 6.2 测量标准及其他设备 7 校准项目和校准方法 7.1 校准项目 7.2 校准方法 8 校准结果表达 9 校准间隔 附录 A（资料性） 温度示值误差的不确定度评定示例(一) 附录 B（资料性） 温度示值误差的不确定度评定示例(二) 附录 C（资料性） 温度示值误差的不确定度评定示例(三) 附录 D（资料性） 校准证书内页格式

calibration specification for working digital thermometers

JB/T 14355-2023 发动机尾焰测温用钨铼热电偶丝

Tungsten-rhenium thermocouple wire for engine exhaust flame temperature measurement

YB/T 074-2023 冶炼用快速数字测温仪技术条件

本文件规定了冶炼用快速数字测温仪的结构型式、基本参数、技术要求、试验方法、检验规则以及标志、包装、运输、贮存和质量要求。本文件适用于冶炼用以消耗型快速热电偶为测温元件的测温仪。

Technical conditions of fast digital thermometer for smelting

ASTM E1750-23 水三相点电池的使用标准指南

Standard Guide for Use of Water Triple Point Cells

ASTM E230/E230M-23a 标准化热电偶的温度电动势（emf）表的标准规范

Standard Specification for Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples

ASTM E839-23 铠装热电偶和铠装热电偶电缆的标准试验方法

Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable

ASTM D6744-23 用防护热流计技术测定阳极碳导热性的标准试验方法

Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

ASTM E2067-23 全尺寸耗氧量量热法燃烧试验的标准实施规程

Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests

T/HMSAQS 003-2023 数字温度计校准规范

本文件规定了数字温度计的计量特性、校准条件、校准项目和校准方法等。

Digital Thermometer Calibration Specifications

GSO EN 1434-2:2023 热能表 第2部分：结构要求

This document is applicable to the constructional requirements for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of thermal energy in legal units. This document covers meters for closed systems only, where the differential pressure over the thermal load is limited. This document is not applicable to: - electrical safety requirements; - pressure safety requirements; and - surface mounted temperature sensors.

Thermal energy meters - Part 2: Constructional requirements