21.060.60 环、套管、管接头、承插 标准查询与下载

JB/T 6381.3-2007 锥密封焊接式直通55°密封管螺纹管接头

JB/T 6381的本部分规定了锥密封焊接式直通55°密封管螺纹管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封焊接式直通55°密封管螺纹管接头。公称压力PN≤31.5MPa，工作温度-25℃～+80℃。

Welding cone couplings straight male stud couplings with R-type pipe threads

JB/T 6381.2-2007 锥密封焊接式直通55°非密封管螺纹管接头

JB/T 6381的本部分规定了锥密封焊接式直通55°非密封管螺纹管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封焊接式直通55°非密封管螺纹管接头。公称压力PN≤31.5MPa，工作温度-25℃～+80℃。

Welding cone couplings straight male stud couplings with G-type pipe threads

JB/T 6381.1-2007 锥密封焊接式 直通管接头

JB/T 6381本部分规定了锥密封焊接式直通管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封焊接式直通管接头。公称压力PN≤315MPa，工作温度-25℃～+80℃。

Welding cone couplings straight male stud couplings

JB/T 7850-2007 手夹快换接头

本标准规定了手夹快换接头的型式与尺寸、技术要求、耐压试验、检验规则、标志、包装、运输和贮存。 本标准适用于公称压力PN≤1.6MPa、介质温度≤120℃。

Quick action coupling of pipe for manual clamp

JB/T 6386-2007 锥密封焊接式管接头 技术条件

本标准规定了锥密封焊接式管接头的技术条件、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于JB/T 6381～6385（所有部分）规定的各种锥密封焊接式管接头及有关零件。

Specification of welding cone couplings

JB/T 6385-2007 锥密封焊接式压力表管接头

本标准规定了锥密封焊接式压力表管接头的型式与尺寸和技术条件。 本标准适用于以油、气为介质管路系统中锥密封焊接式压力表管接头。公称压力PN≤31.5MPa，工作温度-25℃～+80℃。

Welding cone couplings pressure-gauge coouplings

JB/T 6384.2-2007 锥密封焊接式隔壁直通管接头

JB/T 6384的本部分规定了锥密封焊接式隔壁直通管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封焊接式隔壁直通管接头。公称压力PN≤31.5MPa，工作温度-25℃～+80℃。

Welding cone couplings straight bulkhead couplings

JB/T 6384.1-2007 锥密封焊接式隔壁直角管接头

JB/T 6384的本部分规定了锥密封焊接式隔壁直角管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封焊接式隔壁直角管接头。公称压力PN≤31.5MPa，工作温度-25℃～+80℃。

Welding cone couplings angular bulkhead couplings

JB/T 6383.3-2007 锥密封焊接式三通管接头

JB/T 6383的本部分规定了锥密封焊接式三通管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封焊接式三通管接头。公称压力PN≤31.5MPa，工作温度-25℃～+80℃。

Welding cone couplings equal T couplings

JB/T 6383.2-2007 锥密封焊接式直角管接头

JB/T 6383的本部分规定了锥密封焊接式直角管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封焊接式直角管接头。公称压力PN≤31.5MPa，工作温度-25℃～+80℃。

Welding cone couplings elbow couplings

JB/T 6383.1-2007 锥密封两端焊接式直通管接头

JB/T 6383的本部分规定了锥密封两端焊接式直通管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封两端焊接式直通管接头。公称压力PN≤31.5MPa，工作温度-25℃～+80℃。

Welding cone couplings straight weld-on couplings

JB/T 6382.4-2007 锥密封焊接式60°密封管螺纹90°弯管接头

JB/T 6382的本部分规定了锥密封焊接式60°密封管螺纹90°弯管接头的型式与尺寸和技术条件。 本部分适用于以油、气为介质管路系统中锥密封焊接式60°密封管螺纹90°弯管接头。公称压力PN≤16MPa，工作温度-25℃～+80℃。

Welding cone couplings 90 degree syphon male stud couplings with NPT-type pipe threads

NAVY MS28767 REV B-2006 3,000 PSI,II型系统管接头引出口内部螺纹液压梭动阀

Dimensions are in inches. Unless otherwise specified, tolerances for linear dimensions, 3 digits + .010, 4 digits + .0005, and angles + 0.5o.

VALVE, SHUTTLE, HYDRAULIC, INTERNAL THREAD, TUBE FITTING OUTLET, 3000 PSI, TYPE II SYSTEMS

DLA AN231 REV 4 VALID NOTICE 2-2006 塑料漏水垫圈

AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.AN231 REV 4, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.

GROMMET& DRAINAGE, PLASTIC

DLA A-A-59614 VALID NOTICE 1-2006 软管接头组件(花园 水和吸水)

A-A-59614, dated 21 August 2001, has been reviewed and determined to be valid for use in acquisition.

COUPLING ASSEMBLY, HOSE (GARDEN, WATER, AND WATER SUCTION)

KS W 1634-2005 齿环锁紧螺纹嵌件

? ??? ???? ?? ??? ?? ??? ??(collar)? ??? ???? ?? ?

Serrated screw thread-locked in and ring locked insert

KS W 1634-2005(2015) 齿环形锁定螺套

Serrated screw thread－locked in and ring locked insert

DLA DOD-W-63546 A (1)-2005 公制制动键垫圈的常规

The term (REF) refers to the measurements taken from the Government furnished hub or die.

WASHER, KEY, METRIC GENERAL SPECIFICATION FOR

DLA DOD-W-70336 (1)-2005 通用技术条件下公制垫圈

This specification covers metrically dimensioned carbon steel, corrosion resistant and phosphor bronze lock washers, helical spring, internal tooth and external tooth.

WASHERS, (METRIC) , GENERAL SPECIFICATION FOR

DLA AND10089 REV 7 VALID NOTICE 1-2005 设计标准为锥体连接的端部部件

AND10089 REV 7, dated 18 October 1999, has been reviewed and determined to be valid for use in acquisition

FITTING END, DESIGN STANDARD FOR CONE CONNECTION