21.080 铰链、孔眼和其他关节连接件 标准查询与下载

KS F 4521-2003(2018) 螺丝扣建筑

Turnbuckle for building

DIN ISO 12240-4:1999 球面关节轴承.第4部分:球面关节轴承杆端

The document specifies dimension series, tolerances and radial internal clearances for spherical plain radial bearing rod ends.#,,#

Spherical plain bearing - Part 4: Spherical plain bearing rod ends (ISO 12240-4:1998)

ASME B29.19M-1996 链条、附件和链轮

This Standard covers a series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. The pitch of the sidebars is derived from pitch of B29.6 series chain. Pin link plates and roller link plates have identical contours. Chain having embossments is intended for use when operated on its side. 本标准涵盖一系列交替组装的滚子连杆和销连杆，其中销在衬套内铰接，滚子可以自由转动衬套。侧杆的节距来源于B29.6系列链条的节距。销链板和滚子链节板具有相同的轮廓。具有压花的链条旨在在其侧面操作时使用。

CHAINS, ATTACHMENTS AND SPROCKETS

SAE J490-1996 球头

This SAE Standard covers the general and dimensional data for various types of ball joints with inch threads commonly used on control linkages in automotive, marine, and construction and industrial equipment applications. Inasmuch as the load carrying and wear capabilities of ball joints vary considerably with their design and fabrication, it is suggested that the manufacturers be consulted in regard to these features and for recommendations relating to application of the different types and styles available. The inclusion of dimensional data in this standard is not intended to imply that all the products described are stock production sizes. Consumers are requested to consult with manufacturers concerning availability of stock production parts.

Ball Joints

CNS 7937-1996 门用单向弹簧铰链

本标准适用于门扣单向弹簧铰链（以下简称弹簧铰链）。

Single Action Spring Hinges for Doors

CNS 7938-1996 门用双向弹簧铰链

本标准适用于门用双向弹簧铰链（以下简称弹簧铰縺）。

Double Action Spring Hinges for Doors

SAE J1651-1994 公制轭杆端,标准

This SAE Standard provides dimensions, tolerances, materials, and heat treatment for yoke type rod ends with metric threads and for use with metric size clevis pins.

Metric Yoke Type Rod Ends, Standard

SAE J2213-1991 米制球连接件

This SAE Standard covers the general and dimensional data for industrial quality ball joints commonly used on control linkages in metric automotive, marine, construction, and industrial equipment applications.

Metric Ball Joints

DIN 71805:1990 角形铰链.球形承窝.开口弹簧卡环

The dimensions are given the housing of angle joints and circlips.

Angle joints; housings, circlips

CNS 12695-1990 门链检验法

本标准规定门链之检验方法。备考：本标准中｛ ｝ 内数值及单位系国际单位制（SI）。

Method of Test for Chain Door Fasteners

CNS 12694-1990 门链

本标准适用于安装在门上之门链（1）。注（1）：门链本体与支承物以链条或金属制板料连结，俾以控制门扇之开启程度者（参照图 1）。备考：本标准中｛ ｝ 内数值及单位系国际单位制（SI）。

Chain Door Fasteners

CAN/CGSB-69.33-M90-1990 铰链和返回枢轴

La présente Norme nationale du Canada est équivalente à la Norme nationale américaine ANSI/BHMA A156.17-1987. Elle énonce les exigences qui s'appliquent aux charnières et aux pivots de rappel et renferme les essais de fonctionnement répété, les essais de fonctionnement normal et les essais des finis ainsi que les tolérances dimensionnelles et les exigences relatives aux matériaux.

Hinges and return pivots

CAN/CGSB-69.36-M90-1990 铰链、T 型铰链和搭扣

La présente Norme nationale du Canada est équivalente à la Norme nationale américaine ANSI/BHMA A156.20-1984. 1.1 La présente norme énonce les exigences qui s'appliquent aux charnières à pentures, aux charnières en T et aux moraillons et renferme les essais de rendement, notamment les essais de fonctionnement et les essais de résistance. 1.2 Les essais décrits dans la présente norme sont effectués en laboratoire dans les conditions pertinentes. À l'usage, les résultats peuvent être différents en raison de l'installation, de l'entretien ou des conditions ambiantes.

Hinges, T-hinges and hasps

CAN/CGSB-69.23-M90-1990 铰链模板尺寸

La présente Norme nationale du Canada est équivalente à la Norme nationale américaine ANSI/BHMA A156.7-1981. Elle énonce les exigences qui s'appliquent à la longueur, à la largeur, à l'épaisseur, au déport et à l'espacement des trous de vis des charnières gabarits des constructeurs.

Dimensions of hinges templates

SAE J1259-1989 公制球形杆端

This SAE Standard covers the general and dimensional data for industrial quality spherical rod ends commonly used on control linkages in metric automotive, marine, construction, and industrial equipment applications. The rod ends described are available from several manufacturers within the range of the interchangeable specifications. The sliding contact spherical self- aligning bearing members (ball and socket) are available in a variety of materials in the types shown. The load capacities and wear capabilities vary considerably with the design and fabrication. It is suggested that the manufacturers be consulted for recommendations for the type and design appropriate to particular applications.

Metric Spherical Rod Ends

DIN 56923:1989 舞台工程.舞台设备.插座铰链

Stage engineering, stage equipment; socket hinges

CNS 857-1989 钢制及不锈钢制普通铰链

本标准适用于钢制及不锈钢制普通铰链（以下简称铰链）。备考：本标准中｛｝内之单位及数值系国际单位制（SI）。

Steel and Stainless Steel Butt Hinges

SAE J1120-1989 球形杆端关节轴承，标准 1989年6月

This SAE Standard covers the general and dimensional data for industrial quality spherical rod ends commonly used on control linkages in automotive, marine, construction, and industrial equipment applications. The rod ends described are available from several manufacturers within the range of the interchangeable specifications. The sliding contact spherical self-aligning bearing members (ball and socket) are available in a variety of materials in types shown. The load capacities and wear capabilities vary considerably with the design and fabrication. It is suggested that the manufacturers be consulted for recommendations for the type and design appropriate to particular applications.

Spherical Rod Ends, Standard June 1989

SNI 03-0092-1987 钢铰链

Steel hinges

CNS 5084-1986 钢制及不锈钢制普通铰链检验法

本标准规定钢制及求锈钢制普通铰链之检验方法。

Method of Test for Steel and Stainless Steel Butt Hinges