21.180 机箱、外壳、其他机器部件 标准查询与下载

DIN 319:2013 手柄球

Ball knobs

DIN 6335:2008 十字手柄

Palm grips

DIN 6336:2008 星形手柄

Star knobs as specified in this standard are used, for example, in mechanical engineering, industrial plant, machine tools, medical devices and chemical plant equipment.

Star grips

SANS 1235:2007 钻缸

Covers the requirements for low pressure and high pressure single acting, power-operated borehole cylinders of nominal sizes 44,5 mm to 150 mm.

Borehole cylinders

KS B 1331-2007(2017) 手轮

Handwheels

KS B 1331-2007 手轮

이 규격은 밸브스핀들, 축 등에 고정하여 사용하는 핸드휠에 대하여 규정한다. 다만, 장식의

Handwheels

WJ 258-2005 标牌规范

Specifications for nameplates

DIN 98:2003 可转动的球形手柄

The project fixes dimensions and materials for rotatable ball handles. These are mainly used for hand-wheels according to DIN 950, DIN 3319 or crank handles according to DIN 468 and DIN 469.#,,#

Rotatable ball handles

DIN 39:2003 固定式球形手柄

This standard fixes dimensions and materials for fixed ball handles. Fixed ball handles are mainly used for hand-wheels according to DIN 950, DIN 3319 or crank handles according to DIN 468 and DIN 469.#,,#

Fixed ball handles

DIN 469:2003 直柄式手摇曲柄

Crank handles, straight pattern

DIN 468:2003 偏置式手摇曲柄

The standard fixes dimensions and materials for crank handles, offset type.#,,#

Crank handles, offset type

DLA A-A-55617 B VALID NOTICE 1-2003 中型工业用脚轮

A-A-55617B, dated 29 May 1998, has been reviewed and determined to be valid for use in acquisition

CASTER, INDUSTRIAL, MEDIUM DUTY

DLA A-A-55619 B VALID NOTICE 1-2003 重型工业用脚轮

A-A-55619B, dated 29 May 1998, has been reviewed and determined to be valid for use in acquisition

CASTER, INDUSTRIAL, HEAVY DUTY

DLA A-A-55618 D-2003 拖曳用重型工业非中心脚轮转体

This Commercial Item Description (CID) covers industrial heavy duty kingpinless swivel casters for nonpowered material transport and maintenance equipment with towing application for no more than five (5) miles per hour (mph).

CASTER, SWIVEL, KINGPINLESS INDUSTRIAL, HEAVY DUTY WITH TOWING APPLICATION

JB/T 10382-2002 电气设备机械门锁通用技术条件

本标准规定了电气设备机械门锁产品的型号、技术要求、检测方法、检验规则、抽样和标志、包装与贮存。 　　本标准适用于电气设备机械门锁产品的设计、制造、检验与验收。

General technical specification for mechanical door lock of electronic equipment

DIN 3319:2002 碟形手轮.锥形方头毂孔

The document specifies handwheels which are mainly used for fittings made with squares with tapered sides.

Hand-wheels, dished - Hub hole with tapered square

DIN 3220:2002 扁型手轮.锥形方头毂孔

The document specifies handwheels which are mainly used for fittings with squares with tapered sides.

Hand-wheels, flat type - Hub hole with tapered square

DIN 390:2002 碟形手轮.方头直式毂孔

The document describes handwheels which are mainly used for fittings with squares for operating spindles in accordance with DIN 79.

Hand-wheels, dished - Hub hole with straight square

DIN 319:2002 球形把手

The document describes ball knobs which are used for handles in the field of mechanical engineering, on machine tools, devices and applications.

Ball knobs

DIN 3670:2000 盘形手轮

The requirements specifies in this standard apply to disc type hand wheels to be mostly on machines and equipment.

Hand wheels, disk type